arXiv subjects

Noriyuki Tonami

Publications and source records attributed to Noriyuki Tonami.

12 recordsLinked to original sources

arXiv2026

Monitoring exposure-length variations in submarine power cables using distributed fiber-optic sensing

This study proposes an anomaly-detection framework for monitoring exposure-length variations in submarine free-span cables using Distributed Acoustic Sensing (DAS), which is one of the distributed fiber-optic sensing technologies. To address environmental variability and limited training data in offshore environments, a regression-based feature extraction method was introduced to derive low-dimensional latent representations that retain exposure length-dependent vibration characteristics while suppressing environmental influences. The extracted features were used for one-class Support Vector Machine (SVM)-based anomaly detection. The proposed framework was evaluated through wave-tank experiments with exposure lengths ranging from 2 to 10 m. Experimental results showed that anomaly scores decreased approximately monotonically with increasing exposure-length change, exhibiting a strong correlation ($r = -0.83$). The binary classification achieved an F1 score of 0.82 despite training with only small-sample datasets. These findings demonstrate that exposure-length variations can be reliably detected under severe data limitations, supporting the potential of DAS-based cable condition monitoring.

eess.SP↗

arXiv2026

Wave Tank Experiment for Sea State Monitoring with Distributed Acoustic Sensing

Monitoring sea states across the offshore wind farm areas is essential to keep their structures safe, efficiently operate the systems, and assess the environmental effects of wind turbines. Conventional sea state sensors like buoys limit their observable coverage; therefore, installing many sensors across the wide area is necessary to obtain sufficient sea state information. However, such a situation is not practical in terms of cost. Instead, the study proposes utilising optical fibres, which is embedded in existing power cables for telecommunications on the seabed, as sea state monitoring sensors with distributed acoustic sensing (DAS). DAS is a vibration-sensing technology along optical fibres based on the Rayleigh backscattering of the injected laser. It measures the dynamic strain of the optical fibre in real time at each spatial bin, which is called a "channel" along the fibre. In power cables on the seabed, time-varying water pressure due to waves is expected to exert dynamic strain. This hypothesis motivates us to validate whether the application of DAS for power cables can estimate sea state, such as wave period, height, and the direction of arrival. Hence, the authors carried out a wave tank experiment with a programmable wave generator. An actual power cable is installed under the same condition as the bottom-mounted offshore wind turbines. The experimental results show that (i) the wave period can be accurately estimated from the frequency-domain analysis. (ii) The strong linearity between DAS vibration power and the wave height is found. (iii) The direction of arrival of waves can be estimated with the error of 1.5$^\circ$ when there are at least two laying angles of the cable in parallel with the estimation of wavelength. These outcomes promote the feasibility of utilising the existing power cables across offshore wind farms as sea state monitoring sensors.

eess.SP↗

arXiv2026

Event Classification by Physics-informed Inpainting for Distributed Multichannel Acoustic Sensor with Partially Degraded Channels

Distributed multichannel acoustic sensing (DMAS) enables large-scale sound event classification (SEC), but performance drops when many channels are degraded and when sensor layouts at test time differ from training layouts. We propose a learning-free, physics-informed inpainting frontend based on reverse time migration (RTM). In this approach, observed multichannel spectrograms are first back-propagated on a 3D grid using an analytic Green's function to form a scene-consistent image, and then forward-projected to reconstruct inpainted signals before log-mel feature extraction and Transformer-based classification. We evaluate the method on ESC-50 with 50 sensors and three layouts (circular, linear, right-angle), where per-channel SNRs are sampled from -30 to 0 dB. Compared with an AST baseline, scaling-sparsemax channel selection, and channel-swap augmentation, the proposed RTM frontend achieves the best or competitive accuracy across all layouts, improving accuracy by 13.1 points on the right-angle layout (from 9.7% to 22.8%). Correlation analyses show that spatial weights align more strongly with SNR than with channel--source distance, and that higher SNR--weight correlation corresponds to higher SEC accuracy. These results demonstrate that a reconstruct-then-project, physics-based preprocessing effectively complements learning-only methods for DMAS under layout-open configurations and severe channel degradation.

cs.SD↗

arXiv2024

Trainingless Adaptation of Pretrained Models for Environmental Sound Classification

Deep neural network (DNN)-based models for environmental sound classification are not robust against a domain to which training data do not belong, that is, out-of-distribution or unseen data. To utilize pretrained models for the unseen domain, adaptation methods, such as finetuning and transfer learning, are used with rich computing resources, e.g., the graphical processing unit (GPU). However, it is becoming more difficult to keep up with research trends for those who have poor computing resources because state-of-the-art models are becoming computationally resource-intensive. In this paper, we propose a trainingless adaptation method for pretrained models for environmental sound classification. To introduce the trainingless adaptation method, we first propose an operation of recovering time--frequency-ish (TF-ish) structures in intermediate layers of DNN models. We then propose the trainingless frequency filtering method for domain adaptation, which is not a gradient-based optimization widely used. The experiments conducted using the ESC-50 dataset show that the proposed adaptation method improves the classification accuracy by 20.40 percentage points compared with the conventional method.

cs.SD↗

arXiv2023

Low-rank constrained multichannel signal denoising considering channel-dependent sensitivity inspired by self-supervised learning for optical fiber sensing

Optical fiber sensing is a technology wherein audio, vibrations, and temperature are detected using an optical fiber; especially the audio/vibrations-aware sensing is called distributed acoustic sensing (DAS). In DAS, observed data, which is comprised of multichannel data, has suffered from severe noise levels because of the optical noise or the installation methods. In conventional methods for denoising DAS data, signal-processing- or deep-neural-network (DNN)-based models have been studied. The signal-processing-based methods have the interpretability, i.e., non-black box. The DNN-based methods are good at flexibility designing network architectures and objective functions, that is, priors. However, there is no balance between the interpretability and the flexibility of priors in the DAS studies. The DNN-based methods also require a large amount of training data in general. To address the problems, we propose a DNN-structure signal-processing-based denoising method in this paper. As the priors of DAS, we employ spatial knowledge; low rank and channel-dependent sensitivity using the DNN-based structure. The result of fiber-acoustic sensing shows that the proposed method outperforms the conventional methods and the robustness to the number of the spatial ranks. Moreover, the optimized parameters of the proposed method indicate the relationship with the channel sensitivity; the interpretability.

cs.SD↗

arXiv2023

Sound Event Triage: Detecting Sound Events Considering Priority of Classes

We propose a new task for sound event detection (SED): sound event triage (SET). The goal of SET is to detect an arbitrary number of high-priority event classes while allowing misdetections of low-priority event classes where the priority is given for each event class. In conventional methods of SED for targeting a specific sound event class, it is only possible to give priority to a single event class. Moreover, the level of priority is not adjustable, i.e, the conventional methods can use only types of target event class such as one-hot vector, as inputs. To flexibly control much information on the target event, the proposed SET exploits not only types of target sound but also the extent to which each target sound is detected with priority. To implement the detection of events with priority, we propose class-weighted training, in which loss functions and the network are stochastically weighted by the priority parameter of each class. As this is the first paper on SET, we particularly introduce an implementation of single target SET, which is a subtask of SET. Results of the experiments using the URBAN-SED dataset show that the proposed method of single target SET outperforms the conventional SED method by 8.70, 6.66, and 6.09 percentage points for ``air_conditioner,'' ``car_horn,'' and ``street_music,'' respectively, in terms of the intersection-based F-score. For the average score of classes, the proposed methods increase the intersection-based F-score by up to 3.37 percentage points compared with the conventional SED and other target-class-conditioned models.

cs.SD↗

arXiv2022

Sound Event Detection Guided by Semantic Contexts of Scenes

Some studies have revealed that contexts of scenes (e.g., "home," "office," and "cooking") are advantageous for sound event detection (SED). Mobile devices and sensing technologies give useful information on scenes for SED without the use of acoustic signals. However, conventional methods can employ pre-defined contexts in inference stages but not undefined contexts. This is because one-hot representations of pre-defined scenes are exploited as prior contexts for such conventional methods. To alleviate this problem, we propose scene-informed SED where pre-defined scene-agnostic contexts are available for more accurate SED. In the proposed method, pre-trained large-scale language models are utilized, which enables SED models to employ unseen semantic contexts of scenes in inference stages. Moreover, we investigated the extent to which the semantic representation of scene contexts is useful for SED. Experimental results performed with TUT Sound Events 2016/2017 and TUT Acoustic Scenes 2016/2017 datasets show that the proposed method improves micro and macro F-scores by 4.34 and 3.13 percentage points compared with conventional Conformer- and CNN--BiGRU-based SED, respectively.

cs.SD↗

arXiv2021

Sound Event Detection Based on Curriculum Learning Considering Learning Difficulty of Events

In conventional sound event detection (SED) models, two types of events, namely, those that are present and those that do not occur in an acoustic scene, are regarded as the same type of events. The conventional SED methods cannot effectively exploit the difference between the two types of events. All time frames of sound events that do not occur in an acoustic scene are easily regarded as inactive in the scene, that is, the events are easy-to-train. The time frames of the events that are present in a scene must be classified as active in addition to inactive in the acoustic scene, that is, the events are difficult-to-train. To take advantage of the training difficulty, we apply curriculum learning into SED, where models are trained from easy- to difficult-to-train events. To utilize the curriculum learning, we propose a new objective function for SED, wherein the events are trained from easy- to difficult-to-train events. Experimental results show that the F-score of the proposed method is improved by 10.09 percentage points compared with that of the conventional binary cross entropy-based SED.

cs.SD↗

arXiv2020

Joint Analysis of Sound Events and Acoustic Scenes Using Multitask Learning

Sound event detection (SED) and acoustic scene classification (ASC) are important research topics in environmental sound analysis. Many research groups have addressed SED and ASC using neural-network-based methods, such as the convolutional neural network (CNN), recurrent neural network (RNN), and convolutional recurrent neural network (CRNN). The conventional methods address SED and ASC separately even though sound events and acoustic scenes are closely related to each other. For example, in the acoustic scene "office," the sound events "mouse clicking" and "keyboard typing" are likely to occur. Therefore, it is expected that information on sound events and acoustic scenes will be of mutual aid for SED and ASC. In this paper, we propose multitask learning for joint analysis of sound events and acoustic scenes, in which the parts of the networks holding information on sound events and acoustic scenes in common are shared. Experimental results obtained using the TUT Sound Events 2016/2017 and TUT Acoustic Scenes 2016 datasets indicate that the proposed method improves the performance of SED and ASC by 1.31 and 1.80 percentage points in terms of the F-score, respectively, compared with the conventional CRNN-based method.

cs.SD↗

arXiv2020

Sound Event Detection Using Duration Robust Loss Function

Many methods of sound event detection (SED) based on machine learning regard a segmented time frame as one data sample to model training. However, the sound durations of sound events vary greatly depending on the sound event class, e.g., the sound event ``fan'' has a long time duration, while the sound event ``mouse clicking'' is instantaneous. The difference in the time duration between sound event classes thus causes a serious data imbalance problem in SED. In this paper, we propose a method for SED using a duration robust loss function, which can focus model training on sound events of short duration. In the proposed method, we focus on a relationship between the duration of the sound event and the ease/difficulty of model training. In particular, many sound events of long duration (e.g., sound event ``fan'') are stationary sounds, which have less variation in their acoustic features and their model training is easy. Meanwhile, some sound events of short duration (e.g., sound event ``object impact'') have more than one audio pattern, such as attack, decay, and release parts. We thus apply a class-wise reweighting to the binary-cross entropy loss function depending on the ease/difficulty of model training. Evaluation experiments conducted using TUT Sound Events 2016/2017 and TUT Acoustic Scenes 2016 datasets show that the proposed method respectively improves the detection performance of sound events by 3.15 and 4.37 percentage points in macro- and micro-Fscores compared with a conventional method using the binary-cross entropy loss function.

cs.SD↗

arXiv2020

Sound Event Detection by Multitask Learning of Sound Events and Scenes with Soft Scene Labels

Sound event detection (SED) and acoustic scene classification (ASC) are major tasks in environmental sound analysis. Considering that sound events and scenes are closely related to each other, some works have addressed joint analyses of sound events and acoustic scenes based on multitask learning (MTL), in which the knowledge of sound events and scenes can help in estimating them mutually. The conventional MTL-based methods utilize one-hot scene labels to train the relationship between sound events and scenes; thus, the conventional methods cannot model the extent to which sound events and scenes are related. However, in the real environment, common sound events may occur in some acoustic scenes; on the other hand, some sound events occur only in a limited acoustic scene. In this paper, we thus propose a new method for SED based on MTL of SED and ASC using the soft labels of acoustic scenes, which enable us to model the extent to which sound events and scenes are related. Experiments conducted using TUT Sound Events 2016/2017 and TUT Acoustic Scenes 2016 datasets show that the proposed method improves the SED performance by 3.80% in F-score compared with conventional MTL-based SED.

cs.SD↗

arXiv2019

Joint Analysis of Acoustic Events and Scenes Based on Multitask Learning

Acoustic event detection and scene classification are major research tasks in environmental sound analysis, and many methods based on neural networks have been proposed. Conventional methods have addressed these tasks separately; however, acoustic events and scenes are closely related to each other. For example, in the acoustic scene `office', the acoustic events `mouse clicking' and `keyboard typing' are likely to occur. In this paper, we propose multitask learning for joint analysis of acoustic events and scenes, which shares the parts of the networks holding information on acoustic events and scenes in common. By integrating the two networks, we expect that information on acoustic scenes will improve the performance of acoustic event detection. Experimental results obtained using TUT Sound Events 2016/2017 and TUT Acoustic Scenes 2016 datasets indicate that the proposed method improves the performance of acoustic event detection by 10.66 percentage points in terms of the F-score, compared with a conventional method based on a convolutional recurrent neural network.

cs.SD↗