arXiv subjects

Norm M. Tubman

Publications and source records attributed to Norm M. Tubman.

At least 19 recordsLinked to original sources

arXiv2026

Theory of ab initio downfolding with arbitrary range electron-phonon coupling

Ab initio downfolding describes the electronic structure of materials within a low-energy subspace, often around the Fermi level. Typically starting from mean-field calculations, this framework allows for the calculation of one- and two-electron interactions, and the parametrization of a many-body Hamiltonian representing the active space of interest. The subsequent solution of such Hamiltonians can provide insights into the physics of strongly-correlated materials. While phonons can substantially screen electron-electron interactions, electron-phonon coupling has been commonly ignored within ab initio downfolding, and when considered this is done only for short-range interactions. Here we propose a theory of ab initio downfolding that accounts for all mechanisms of electron-phonon coupling on equal footing, regardless of the range of the interactions. Our practical computational implementation is readily compatible with current downfolding approaches. We apply our approach to polar materials MgO and GeTe, and we reveal the importance of both short-range and long-range electron-phonon coupling in determining the magnitude of electron-electron interactions. Our results show that in the static limit, phonons reduce the on-site repulsion between electrons by 40% for MgO, and by 79% for GeTe. Our framework also predicts that overall attractive nearest-neighbor interactions arise between electrons in GeTe, consistent with superconductivity in this material.

cond-mat.mtrl-sci↗

arXiv2026

Benchmarking quantum trial wavefunctions for phaseless auxiliary-field quantum Monte Carlo

The phaseless auxiliary-field quantum Monte Carlo (ph-AFQMC) method is a stochastic imaginary-time projection technique for computing ground-state properties of strongly correlated quantum systems, with accuracy that depends critically on the choice of trial wavefunction. Here, we investigate ph-AFQMC with trial states prepared using parameterized quantum circuits. In this work, we present a comprehensive benchmarking study of quantum trial wavefunctions spanning unitary coupled-cluster, Hamiltonian-informed, Jastrow-inspired, and adaptively constructed ansatze. The benchmarking evaluates accuracy, expressibility, and scalability of these ansatze within the QC-AFQMC framework. We test these ansatze on linear hydrogen chains under bond stretching and find that several ansatz families produce chemically accurate ph-AFQMC energies across the dissociation curve. We have performed simulations using the CUDA-Q quantum development platform on the GPU partition of the Perlmutter supercomputer. When comparing ansatze at similar numbers of variational parameters, we find that different ansatz families yield comparable ph-AFQMC results despite exhibiting substantially different variational energies, optimization costs, and circuit depths. Our results indicate that the variational energy of an ansatz is not always a reliable indicator of its quality for ph-AFQMC and reveal instances of over-parameterization. In the strongly correlated regime, trial wavefunctions obtained from adaptive ansatze, exemplified here by ADAPT-VQE with the UCCSD operator pool, can outperform their fixed-ansatz counterparts (UCCSD) in terms of projected energies while using substantially more compact circuits, providing a flexible route to optimize quantum resources within the ph-AFQMC framework.

quant-ph↗

arXiv2026

Overlapped groupings for quantum energy estimation: Maximal variance reduction and deterministic algorithms for reducing variance

Grouping-based measurement strategies are widely used to reduce measurement complexity in near-term quantum algorithms. While these schemes have typically produced disjoint groups, recently this has been relaxed in what is known as overlapped grouping or coefficient splitting where operators may appear in more than one compatible group. In recent work, it has been numerically shown that this strategy can reduce the variance of energy estimates on small benchmark problems, motivating both the application and further analysis of the method. Here we prove that overlapped grouping for energy estimation can lead to a maximal variance reduction that is linear in the number of Hamiltonian terms. We introduce a new algorithm which we call repacking to transform existing groups into overlapped groups, and we show this repacking procedure iteratively reduces variance under mild assumptions. We also perform numerical simulations with Hamiltonians up to $44$ qubits and $575 \cdot 10^{3}$ terms, assessing overlapped grouping at scale on problems of practical importance. Our numerics show that the variance reduction relative to state-of-the-art (disjoint) grouping increases linearly with the problem size, suggesting that overlapped grouping methods can be a powerful strategy for quantum energy estimation at the scale of Megaquop computers and beyond.

quant-ph↗

arXiv2026

The cost of quantum algorithms for biochemistry: A case study in metaphosphate hydrolysis

We evaluate the quantum resource requirements for ATP/metaphosphate hydrolysis, one of the most important reactions in all of biology with implications for metabolism, cellular signaling, and cancer therapeutics. In particular, we consider three algorithms for solving the ground state energy estimation problem: the variational quantum eigensolver, quantum Krylov, and quantum phase estimation. By utilizing exact classical simulation, numerical estimation, and analytical bounds, we provide a current and future outlook for using quantum computers to solve impactful biochemical and biological problems. Our results show that variational methods, while being the most heuristic, still require substantially fewer overall resources on quantum hardware, and could feasibly address such problems on current or near-future devices. We include our complete dataset of biomolecular Hamiltonians and code as benchmarks to improve upon with future techniques.

quant-ph↗

arXiv2025

Artificial Intelligence for Quantum Computing

Artificial intelligence (AI) advancements over the past few years have had an unprecedented and revolutionary impact across everyday application areas. Its significance also extends to technical challenges within science and engineering, including the nascent field of quantum computing (QC). The counterintuitive nature and high-dimensional mathematics of QC make it a prime candidate for AI's data-driven learning capabilities, and in fact, many of QC's biggest scaling challenges may ultimately rest on developments in AI. However, bringing leading techniques from AI to QC requires drawing on disparate expertise from arguably two of the most advanced and esoteric areas of computer science. Here we aim to encourage this cross-pollination by reviewing how state-of-the-art AI techniques are already advancing challenges across the hardware and software stack needed to develop useful QC - from device design to applications. We then close by examining its future opportunities and obstacles in this space.

quant-ph↗

arXiv2025

Hybrid continuous-discrete-variable quantum computing: a guide to utility

Quantum computing has traditionally centered around the discrete variable paradigm. A new direction is the inclusion of continuous variable modes and the consideration of a hybrid continuous-discrete approach to quantum computing. In this paper, we discuss some of the advantages of this modality, and lay out a number of potential applications that can make use of it; these include applications from physics, chemistry, and computer science. We also briefly overview some of the algorithmic and software considerations for this new paradigm.

quant-ph↗

arXiv2025

Efficient Floating-Point Arithmetic on Fault-Tolerant Quantum Computers

We propose a novel floating-point encoding scheme that builds on prior work involving fixed-point encodings. We encode floating-point numbers using Two's Complement fixed-point mantissas and Two's Complement integral exponents. We used our proposed approach to develop quantum algorithms for fundamental arithmetic operations, such as bit-shifting, reciprocation, multiplication, and addition. We prototyped and investigated the performance of the floating-point encoding scheme on quantum computer simulations by performing reciprocation on randomly drawn inputs and by solving first-order ordinary differential equations, while varying the number of qubits in the encoding. We observed rapid convergence to the exact solutions as we increased the number of qubits and a significant reduction in the number of ancilla qubits required for reciprocation when compared with similar approaches.

quant-ph↗

arXiv2025

Estimating Eigenenergies from Quantum Dynamics: A Unified Noise-Resilient Measurement-Driven Approach

Ground state energy estimation in physical, chemical, and materials sciences is one of the most promising applications of quantum computing. In this work, we introduce a new hybrid approach that finds the eigenenergies by collecting real-time measurements and post-processing them using the machinery of dynamic mode decomposition (DMD). From the perspective of quantum dynamics, we establish that our approach can be formally understood as a stable variational method on the function space of observables available from a quantum many-body system. We also provide strong theoretical and numerical evidence that our method converges rapidly even in the presence of a large degree of perturbative noise, and show that the method bears an isomorphism to robust matrix factorization methods developed independently across various scientific communities. Our numerical benchmarks on spin and molecular systems demonstrate an accelerated convergence and a favorable resource reduction over state-of-the-art algorithms. The DMD-centric strategy can systematically mitigate noise and stands out as a leading hybrid quantum-classical eigensolver.

quant-ph↗

arXiv2025

Efficient Classical Processing of Constant-Depth Time Evolution Circuits in Control Hardware

Improving quantum algorithms run-time performance involves several strategies such as reducing the quantum gate counts, decreasing the number of measurements, advancement in QPU technology for faster gate operations, or optimizing the classical processing. This work focuses on the latter, specifically reducing classical processing and compilation time via hardware-assisted parameterized circuit execution (PCE) for computing dynamical properties of quantum systems. PCE was previously validated for QCVV protocols, which leverages structural circuit equivalencies. We demonstrate the applicability of this approach to computing dynamical properties of quantum many-body systems using structurally equivalent time evolution circuits, specifically calculating correlation functions of spin models using constant-depth circuits generated via Cartan decomposition. Implementing this for spin-spin correlation functions in Transverse field XY (up to 6-sites) and Heisenberg spin models (up to 3-sites), we observed a run-time reduction of up to 50\% compared to standard compilation methods. This highlights the adaptability of time-evolution circuit with hardware-assisted PCE to potentially mitigate the classical bottlenecks in near-term quantum algorithms.

quant-ph↗

arXiv2025

Non-Clifford diagonalization for measurement shot reduction in quantum expectation value estimation

Estimating expectation values on near-term quantum computers often requires a prohibitively large number of measurements. One widely-used strategy to mitigate this problem has been to partition an operator's Pauli terms into sets of mutually commuting operators. Here, we introduce a method that relaxes this constraint of commutativity, instead allowing for entirely arbitrary terms to be grouped together, save a locality constraint. The key idea is that we decompose the operator into arbitrary tensor products with bounded tensor size, ignoring Pauli commuting relations. This method -- named $k$-NoCliD ($k$-local non-Clifford diagonalization) -- allows one to measure in far fewer bases in most cases, often (though not always) at the cost of increasing the circuit depth. We introduce several partitioning algorithms tailored to different Hamiltonian classes. For electronic structure, we numerically demonstrate the existence of threshold values of $k$ for which $k$-NoCliD leads to the lowest shot counts, though we leave improved partitioning algorithms to future work. We focus primarily on three Hamiltonian classes -- molecular vibrational structure, Fermi-Hubbard, and Bose-Hubbard -- and show that $k$-NoCliD reduces the number of circuit shots, often by a very large margin, and often even for $k$ as small as 2.

quant-ph↗

arXiv2025

Simple Diagonal State Designs with Reconfigurable Real-Time Circuits

Unitary designs are widely used in quantum computation, but in many practical settings it suffices to construct a diagonal state design generated with unitary gates diagonal in the computational basis. In this work, we introduce a simple and efficient diagonal state 3-design based on real-time evolutions under 2-local Hamiltonians. Our construction is inspired by the classical Girard-Hutchinson trace estimator in that it involves the stochastic preparation of many random-phase states. Though the exact Girard-Hutchinson states are not tractably implementable on a quantum computer, we can construct states that match the statistical moments of the Girard-Hutchinson states with real-time evolution. Importantly, our random states are all generated using the same Hamiltonians for real-time evolution, with the randomness arising solely from stochastic variations in the durations of the evolutions. In this sense, the circuit is fully reconfigurable and thus suited for near-term realizations on both digital and analog platforms. Moreover, we show how to extend our construction to achieve diagonal state designs of arbitrarily high order.

quant-ph↗

arXiv2025

Phonon-mediated electron attraction in SrTiO$_3$ via the generalized Fröhlich and deformation potential mechanisms

Superconductivity in doped SrTiO$_3$ was discovered in 1964, the first superconducting transition observed in a doped semiconductor. However, the mechanism of electron pairing in SrTiO$_3$ remains a subject of debate. By developing a theoretical framework to incorporate dynamical lattice screening in the electronic Coulomb interactions of semiconductors and insulators, we demonstrate analytically that linear long-range coupling of electrons to multiple longitudinal optical phonons, described by a generalized Fröhlich mechanism, can result in superconductivity in SrTiO$_3$. Moreover, by combining our theory with first-principles calculations, we reveal an additional attractive interaction between electrons in SrTiO$_3$ due to the deformation potential mechanism, arising from the mixed ionic-covalent character of the Ti-O bond. Our results may have implications for the emergence of phonon-mediated electron attraction and superconductivity in a broad range of materials.

cond-mat.supr-con↗

arXiv2025

Compressing Hamiltonians with ab initio downfolding for simulating strongly-correlated materials on quantum computers

The accurate first-principles description of strongly-correlated materials is an important and challenging problem in condensed matter physics. Ab initio downfolding has emerged as a way of deriving compressed many-body Hamiltonians that maintain the essential physics of strongly-correlated materials. The solution of these material-specific models is still exponentially difficult to generate on classical computers, but quantum algorithms allow for a significant speed-up in obtaining the ground states of these compressed Hamiltonians. Here we demonstrate that utilizing quantum algorithms for obtaining the properties of downfolded Hamiltonians can indeed yield high-fidelity solutions. By combining ab initio downfolding and variational quantum eigensolvers, we correctly predict the antiferromagnetic state of one-dimensional cuprate $\text{Ca}_2\text{CuO}_3$, the excitonic ground state of monolayer $\text{WTe}_2$, and the charge-ordered state of correlated metal $\text{SrVO}_3$. Numerical simulations utilizing a classical tensor network implementation of variational quantum eigensolvers allow us to simulate large models with up to $54$ qubits and encompassing up to four bands in the correlated subspace, which is indicative of the complexity that our framework can address. Through these methods we demonstrate the potential of classical pre-optimization and downfolding techniques for enabling efficient materials simulation using quantum algorithms.

quant-ph↗

arXiv2024

Beyond MP2 initialization for unitary coupled cluster quantum circuits

The unitary coupled cluster (UCC) ansatz is a promising tool for achieving high-precision results using the variational quantum eigensolver (VQE) algorithm in the NISQ era. However, results on quantum hardware are thus far very limited and simulations have only accessed small system sizes. We advance the state of the art of UCC simulations by utilizing an efficient sparse wavefunction circuit solver and studying systems up to 64 qubits. Here we report results obtained using this solver that demonstrate the power of the UCC ansatz and address pressing questions about optimal initial parameterizations and circuit construction, among others. Our approach enables meaningful benchmarking of the UCC ansatz, a crucial step in assessing the utility of VQE for achieving quantum advantage.

quant-ph↗

arXiv2024

Classical Pre-optimization Approach for ADAPT-VQE: Maximizing the Potential of High-Performance Computing Resources to Improve Quantum Simulation of Chemical Applications

The ADAPT-VQE algorithm is a promising method for generating a compact ansatz based on derivatives of the underlying cost function, and it yields accurate predictions of electronic energies for molecules. In this work we report the implementation and performance of ADAPT-VQE with our recently developed sparse wavefunction circuit solver (SWCS) in terms of accuracy and efficiency for molecular systems with up to 52 spin-orbitals. The SWCS can be tuned to balance computational cost and accuracy, which extends the application of ADAPT-VQE for molecular electronic structure calculations to larger basis sets and larger number of qubits. Using this tunable feature of the SWCS, we propose an alternative optimization procedure for ADAPT-VQE to reduce the computational cost of the optimization. By pre-optimizing a quantum simulation with a parameterized ansatz generated with ADAPT-VQE/SWCS, we aim to utilize the power of classical high-performance computing in order to minimize the work required on noisy intermediate-scale quantum hardware, which offers a promising path toward demonstrating quantum advantage for chemical applications.

quant-ph↗

arXiv2024

A circuit-generated quantum subspace algorithm for the variational quantum eigensolver

Recent research has shown that wavefunction evolution in real- and imaginary-time can generate quantum subspaces with significant utility for obtaining accurate ground state energies. Inspired by these methods, we propose combining quantum subspace techniques with the variational quantum eigensolver (VQE). In our approach, the parameterized quantum circuit is divided into a series of smaller subcircuits. The sequential application of these subcircuits to an initial state generates a set of wavefunctions that we use as a quantum subspace to obtain high-accuracy groundstate energies. We call this technique the circuit subspace variational quantum eigensolver (CSVQE) algorithm. By benchmarking CSVQE on a range of quantum chemistry problems, we show that it can achieve significant error reduction in the best case compared to conventional VQE, particularly for poorly optimized circuits, greatly improving convergence rates. Furthermore, we demonstrate that when applied to circuits trapped at a local minima, CSVQE can produce energies close to the global minimum of the energy landscape, making it a potentially powerful tool for diagnosing local minima.

quant-ph↗

arXiv2024

Surrogate Constructed Scalable Circuits ADAPT-VQE in the Schwinger model

Inspired by recent advancements of simulating periodic systems on quantum computers, we develop a new approach, (SC)$^2$-ADAPT-VQE, to further advance the simulation of these systems. Our approach extends the scalable circuits ADAPT-VQE framework, which builds an ansatz from a pool of coordinate-invariant operators defined for arbitrarily large, though not arbitrarily small, volumes. Our method uses a classically tractable ``Surrogate Constructed'' method to remove irrelevant operators from the pool, reducing the minimum size for which the scalable circuits are defined. Bringing together the scalable circuits and the surrogate constructed approaches forms the core of the (SC)$^2$ methodology. Our approach allows for a wider set of classical computations, on small volumes, which can be used for a more robust extrapolation protocol. While developed in the context of lattice models, the surrogate construction portion is applicable to a wide variety of problems where information about the relative importance of operators in the pool is available. As an example, we use it to compute properties of the Schwinger model - quantum electrodynamics for a single, massive fermion in $1+1$ dimensions - and show that our method can be used to accurately extrapolate to the continuum limit.

quant-ph↗

arXiv2024

Towards Efficient Quantum Computation of Molecular Ground State Energies using Bayesian Optimization with Priors over Surface Topology

Variational Quantum Eigensolvers (VQEs) represent a promising approach to computing molecular ground states and energies on modern quantum computers. These approaches use a classical computer to optimize the parameters of a trial wave function, while the quantum computer simulates the energy by preparing and measuring a set of bitstring observations, referred to as shots, over which an expected value is computed. Although more shots improve the accuracy of the expected ground state, it also increases the simulation cost. Hence, we propose modifications to the standard Bayesian optimization algorithm to leverage few-shot circuit observations to solve VQEs with fewer quantum resources. We demonstrate the effectiveness of our proposed approach, Bayesian optimization with priors on surface topology (BOPT), by comparing optimizers for molecular systems and demonstrate how current quantum hardware can aid in finding ground state energies.

quant-ph↗