arXiv subjects

Norman R. Heckenberg

Publications and source records attributed to Norman R. Heckenberg.

16 recordsLinked to original sources

arXiv2013

Dynamical tunnelling with ultracold atoms in magnetic microtraps

The study of dynamical tunnelling in a periodically driven anharmonic potential probes the quantum-classical transition via the experimental control of the effective Planck's constant for the system. In this paper we consider the prospects for observing dynamical tunnelling with ultracold atoms in magnetic microtraps on atom chips. We outline the driven anharmonic potentials that are possible using standard magnetic traps, and find the Floquet spectrum for one of these as a function of the potential strength, modulation, and effective Planck's constant. We develop an integrable approximation to the non-integrable Hamiltonian and find that it can explain the behaviour of the tunnelling rate as a function of the effective Planck's constant in the regular region of parameter space. In the chaotic region we compare our results with the predictions of models that describe chaos-assisted tunnelling. Finally we examine the practicality of performing these experiments in the laboratory with Bose-Einstein condensates.

cond-mat.quant-gas↗

arXiv2011

Growth dynamics of a Bose-Einstein condensate in a dimple trap without cooling

We study the formation of a Bose-Einstein condensate in a cigar-shaped three-dimensional harmonic trap, induced by the controlled addition of an attractive "dimple" potential along the weak axis. In this manner we are able to induce condensation without cooling due to a localized increase in the phase space density. We perform a quantitative analysis of the thermodynamic transformation in both the sudden and adiabatic regimes for a range of dimple widths and depths. We find good agreement with equilibrium calculations based on self-consistent semiclassical Hartree-Fock theory describing the condensate and thermal cloud. We observe there is an optimal dimple depth that results in a maximum in the condensate fraction. We also study the non-equilibrium dynamics of condensate formation in the sudden turn-on regime, finding good agreement for the observed time dependence of the condensate fraction with calculations based on quantum kinetic theory.

cond-mat.quant-gas↗

arXiv2009

Momentum of an electromagnetic wave in dielectric media

Almost a hundred years ago, two different expressions were proposed for the energy--momentum tensor of an electromagnetic wave in a dielectric. Minkowski's tensor predicted an increase in the linear momentum of the wave on entering a dielectric medium, whereas Abraham's tensor predicted its decrease. Theoretical arguments were advanced in favour of both sides, and experiments proved incapable of distinguishing between the two. Yet more forms were proposed, each with their advocates who considered the form that they were proposing to be the one true tensor. This paper reviews the debate and its eventual conclusion: that no electromagnetic wave energy--momentum tensor is complete on its own. When the appropriate accompanying energy--momentum tensor for the material medium is also considered, experimental predictions of all the various proposed tensors will always be the same, and the preferred form is therefore effectively a matter of personal choice.

physics.class-ph↗

arXiv2008

Symmetry and the generation and measurement of optical torque

A key element in the generation of optical torque in optical traps, which occurs when electromagnetic angular momentum is transferred from the trapping beam to the trapped particle by scattering, is the symmetries of the scattering particle and the trapping beam. We discuss the effect of such symmetries on the generation and measurement of optical torque in optical tweezers, and some consequent general principles for the design of optically-driven micromachines.

physics.optics↗

arXiv2008

Fabrication of micro-structures for optically driven micromachines using two-photon photopolymerization of UV curing resins

Two-photon photopolymerization of UV curing resins is an attractive method for the fabrication of microscopic transparent objects with size in the tens of micrometers range. We have been using this method to produce three-dimensional structures for optical micromanipulation, in an optical system based on a femtosecond laser. By carefully adjusting the laser power and the exposure time we were able to create micro-objects with well-defined 3D features and with resolution below the diffraction limit of light. We discuss the performance and capabilities of a microfabrication system, with some examples of its products.

physics.optics↗

arXiv2007

Picolitre viscometry using optically rotated particles

Important aspects in the field of microrheology are the studies of the viscosity of fluids within structures with micron dimensions and fluid samples where only microlitre volumes are available. We have quantitatively investigated the performance and accuracy of a microviscometer based on rotating optical tweezers, that requires as little as one microlitre of sample. We have characterised our microviscometer, including effects due to heating, and demonstrated its ability to perform measurements over a large dynamic range of viscosities (at least two orders of magnitude). We have also inserted a probe particle through the membrane of a cell and measured the viscosity of the intramembranous contents. Viscosity measurements of tears have also been made with our microviscometer, which demonstrate its potential use to study un-stimulated eye fluid.

physics.optics↗

arXiv2007

Collecting single molecules with conventional optical tweezers

The size of particles which can be trapped in optical tweezers ranges from tens of nanometres to tens of micrometres. This size regime also includes large single molecules. Here we present experiments demonstrating that optical tweezers can be used to collect polyethylene oxide (PEO) molecules suspended in water. The molecules that accumulate in the focal volume do not aggregate and therefore represent a region of increased molecule concentration, which can be controlled by the trapping potential. We also present a model which relates the change in concentration to the trapping potential. Since many protein molecules have molecular weights for which this method is applicable the effect may be useful in assisting nucleation of protein crystals.

physics.optics↗

arXiv2006

Measurement of refractive index of single microparticles

The refractive index of single microparticles is derived from precise measurement and rigorous modeling of the stiffness of a laser trap. We demonstrate the method for particles of four different materials with diameters from 1.6 to 5.2 microns and achieve an accuracy of better than 1%. The method greatly contributes as a new characterization technique because it works best under conditions (small particle size, polydispersion) where other methods, such as absorption spectroscopy, start to fail. Particles need not be transferred to a particular fluid, which prevents particle degradation or alteration common in index matching techniques. Our results also show that advanced modeling of laser traps accurately reproduces experimental reality.

physics.optics↗

arXiv2006

Modelling optical micro-machines

A strongly focused laser beam can be used to trap, manipulate and exert torque on a microparticle. The torque is the result of transfer of angular momentum by scattering of the laser beam. The laser could be used to drive a rotor, impeller, cog wheel or some other microdevice of a few microns in size, perhaps fabricated from a birefringent material. We review our methods of computationally simulating the torque and force imparted by a laser beam. We introduce a method of hybridizing the T-matrix with the Finite Difference Frequency Domain (FDFD) method to allow the modelling of materials that are anisotropic and inhomogeneous, and structures that have complex shapes. The high degree of symmetry of a microrotor, such as discrete or continuous rotational symmetry, can be exploited to reduce computational time and memory requirements by orders of magnitude. This is achieved by performing calculations for only a given segment or plane that is repeated across the whole structure. This can be demonstrated by modelling the optical trapping and rotation of a cube.

physics.optics↗

arXiv2006

Measurement of the total optical angular momentum transfer in optical tweezers

We describe a way to determine the total angular momentum, both spin and orbital, transferred to a particle trapped in optical tweezers. As an example an LG02 mode of a laser beam with varying degrees of circular polarisation is used to trap and rotate an elongated particle with a well defined geometry. The method successfully estimates the total optical torque applied to the particle. For this technique, there is no need to measure the viscous drag on the particle, as it is an optical measurement. Therefore, knowledge of the particle's size and shape, as well as the fluid's viscosity, is not required.

physics.optics↗

arXiv2006

Orientation of optically trapped nonspherical birefringent particles

While the alignment and rotation of microparticles in optical traps have received increased attention recently, one of the earliest examples has been almost totally neglected the alignment of particles relative to the beam axis, as opposed to about the beam axis. However, since the alignment torques determine how particles align in a trap, they are directly relevant to practical applications. Lysozyme crystals are an ideal model system to study factors determining the orientation of nonspherical birefringent particles in a trap. Both their size and their aspect ratio can be controlled by the growth parameters, and their regular shape makes computational modeling feasible. We show that both external shape and internal birefringence anisotropy contribute to the alignment torque. Three-dimensionally trapped elongated objects either align with their long axis parallel or perpendicular to the beam axis depending on their size. The shape-dependent torque can exceed the torque due to birefringence, and can align negative uniaxial particles with their optic axis parallel to the electric field, allowing an application of optical torque about the beam axis.

physics.optics↗

arXiv2004

Optical measurement of torque exerted on an elongated object by a non-circular laser beam

We have developed a scheme to measure the optical torque, exerted by a laser beam on a phase object, by measuring the orbital angular momentum of the transmitted beam. The experiment is a macroscopic simulation of a situation in optical tweezers, as orbital angular momentum has been widely used to apply torque to microscopic objects. A hologram designed to generate LG02 modes and a CCD camera are used to detect the orbital component of the beam. Experimental results agree with theoretical numerical calculations, and the strength of the orbital component suggest its usefulness in optical tweezers for micromanipulation.

physics.optics↗

arXiv2004

Angular momentum of a strongly focussed Gaussian beam

A circularly polarized rotationally symmetric paraxial laser beams carries hbar angular momentum per photon as spin. Focussing the beam with a rotationally symmetric lens cannot change this angular momentum flux, yet the focussed beam must have spin less than hbar per photon. The remainder of the original spin is converted to orbital angular momentum, manifesting itself as a longitudinal optical vortex at the focus. This demonstrates that optical orbital angular momentum can be generated by a rotationally symmetric optical system which preserves the total angular momentum of the beam.

physics.optics↗

arXiv2004

Optical microrheology using rotating laser-trapped particles

We demonstrate an optical system that can apply and accurately measure the torque exerted by the trapping beam on a rotating birefringent probe particle. This allows the viscosity and surface effects within liquid media to be measured quantitatively on a micron-size scale using a trapped rotating spherical probe particle. We use the system to measure the viscosity inside a prototype cellular structure.

physics.optics↗

arXiv2004

Analysis of dynamical tunnelling experiments with a Bose-Einstein condensate

Dynamical tunnelling is a quantum phenomenon where a classically forbidden process occurs, that is prohibited not by energy but by another constant of motion. The phenomenon of dynamical tunnelling has been recently observed in a sodium Bose-Einstein condensate. We present a detailed analysis of these experiments using numerical solutions of the three dimensional Gross-Pitaevskii equation and the corresponding Floquet theory. We explore the parameter dependency of the tunnelling oscillations and we move the quantum system towards the classical limit in the experimentally accessible regime.

nlin.CD↗

arXiv2003

Optical application and measurement of torque on microparticles of isotropic nonabsorbing material

We show how it is possible to controllably rotate or align microscopic particles of isotropic nonabsorbing material in a TEM00 Gaussian beam trap, with simultaneous measurement of the applied torque using purely optical means. This is a simple and general method of rotation, requiring only that the particle is elongated along one direction. Thus, this method can be used to rotate or align a wide range of naturally occurring particles. The ability to measure the applied torque enables the use of this method as a quantitative tool--the rotational equivalent of optical tweezers based force measurement. As well as being of particular value for the rotation of biological specimens, this method is also suitable for the development of optically-driven micromachines.

physics.optics↗