arXiv subjects

O. Burkan Isgor

Publications and source records attributed to O. Burkan Isgor.

3 recordsLinked to original sources

arXiv2024

Microscale chemical imaging to characterize and quantify corrosion processes at the metal-electrolyte interface

We introduce an experimental setup to chemically image corrosion processes at metal-electrolyte interfaces under stagnant, confined conditions relevant in a wide range of situations. The setup is based on a glass capillary, in which precipitation of corrosion products in the interfacial aqueous phase can be monitored over time with optical microscopy, and chemically and structurally characterized with microscopic synchrotron-based techniques (X-ray fluorescence, X-ray diffraction, and X-ray absorption spectroscopy). Moreover, quantification of precipitates through X-ray transmission measurements provides in-situ corrosion rates. We illustrate this setup for iron corrosion in a pH 8 electrolyte, revealing the critical role of O2 and iron diffusion in governing the precipitation of ferrihydrite and its transformation to goethite. Corrosion and coupled reactive transport processes can thus be monitored and fundamentally investigated at the metal-electrolyte interface, with micrometer-scale resolution. This capillary setup has potential applications for in-situ corrosion studies of various metals and environments.

cond-mat.mtrl-sci↗

arXiv2023

Three-dimensional characterization of the steel-concrete interface by FIB-SEM nanotomography

While it is widely accepted that the steel-concrete interface (SCI) plays an important role in governing the long-term durability of reinforced concrete structures, understanding about the primary features of the SCI that influence corrosion degradation mechanisms has remained elusive. This lack of knowledge can be attributed, on the one hand, to the complex heterogeneous nature of the SCI, and, on the other hand, the absence of experimental techniques suitable for studying the relevant features of the SCI. Here, we use focused ion beam - scanning electron microscopy (FIB-SEM) nanotomography to obtain high resolution 3D tomograms of the steel-concrete interfacial zone. Five tomograms, spanning volumes ranging from 8,000 to 200,000 cubic micrometer, were acquired for situations representative of both non-corroded and corroded SCIs. The achieved voxel size falls within the range of 30-50 nm, thus providing a resolution clearly surpassing the capabilities of computed X-ray tomography. This resolution enables the 3D characterization of the microstructure at the capillary scale, which is the scale at which relevant corrosion and related mass transport processes occur. Thus, FIB-SEM nanotomography is capable of yielding datasets of the SCI that serve as basis for the generation of digital twins of the interfacial microstructure, thereby enabling future studies about durability and corrosion of reinforced concrete at the pore scale.

cond-mat.mtrl-sci↗

arXiv2023

Transformation of 2-line ferrihydrite to goethite at alkaline pH

The transformation of 2-line ferrihydrite to goethite from supersaturated solutions at alkaline pH >= 13.0 was studied using a combination of benchtop and advanced synchrotron techniques such as X-ray diffraction, thermogravimetric analysis and X-ray absorption spectroscopy. In comparison to the transformation rates at acidic to mildly alkaline environments, the half-life,t_1/2, of 2-line ferrihydrite reduces from several months at pH = 2.0, and approximately 15 days at pH = 10.0, to just under 5 hours at pH = 14.0. Calculated first order rate constants of transformation, k, increase exponentially with respect to the pH and follow the progression log_10 k = log_10 k_0 + a*pH^E3. Simultaneous monitoring of the aqueous Fe(III) concentration via inductively coupled plasma optical emission spectroscopy demonstrates that (i) goethite likely precipitates from solution and (ii) its formation is rate-limited by the comparatively slow re-dissolution of 2-line ferrihydrite. The analysis presented can be used to estimate the transformation rate of naturally occurring 2-line ferrihydrite in aqueous electrolytes characteristic to mine and radioactive waste tailings as well as the formation of corrosion products in cementitious pore solutions.

cond-mat.mtrl-sci↗