Searcharxiv⌕ Search

arXiv subjects

O. L. Creevey

Publications and source records attributed to O. L. Creevey.

At least 73 records · Page 4Linked to original sources

Probing the parameter space of HD 49933: a comparison between global and local methods

We present two independent methods for studying the global stellar parameter space (mass M, age, initial chemical composition X_0, Z_0) of HD 49933 with seismic data. Using a local minimization and an MCMC algorithm, we obtain consistent results for the determination of the stellar properties: M = 1.1 - 1.2 M_solar, Age ~ 3.0 Gyr, Z_0 ~ 0.008. A description of the error ellipses can be defined using Singular Value Decomposition techniques, and this is validated by comparing the errors with those from the MCMC method.

astro-ph.SR↗

Variation in the frequency separations with activity and impact on stellar parameter determination

Frequency separations used to infer global properties of stars through asteroseismology can change depending on the strength and at what epoch of the stellar cycle the p-mode frequencies are measured. In the Sun these variations have been seen, even though the Sun is a low-activity star. In this paper, we discuss these variations and their impact on the determination of the stellar parameters (radius, mass and age) for the Sun. Using the data from maximum and minimum activity, we fitted an age for the Sun that differs on average by 0.2 Gyr: slightly older during minimum activity. The fitted radius is also lower by about 0.5% for the solar effective temperature during minimum.

astro-ph.SR↗

A precise asteroseismic age and radius for the evolved Sun-like star KIC 11026764

The primary science goal of the Kepler Mission is to provide a census of exoplanets in the solar neighborhood, including the identification and characterization of habitable Earth-like planets. The asteroseismic capabilities of the mission are being used to determine precise radii and ages for the target stars from their solar-like oscillations. Chaplin et al. (2010) published observations of three bright G-type stars, which were monitored during the first 33.5 days of science operations. One of these stars, the subgiant KIC 11026764, exhibits a characteristic pattern of oscillation frequencies suggesting that it has evolved significantly. We have derived asteroseismic estimates of the properties of KIC 11026764 from Kepler photometry combined with ground-based spectroscopic data. We present the results of detailed modeling for this star, employing a variety of independent codes and analyses that attempt to match the asteroseismic and spectroscopic constraints simultaneously. We determine both the radius and the age of KIC 11026764 with a precision near 1%, and an accuracy near 2% for the radius and 15% for the age. Continued observations of this star promise to reveal additional oscillation frequencies that will further improve the determination of its fundamental properties.

astro-ph.SR↗

Seismic signatures of stellar cores of solar-like pulsators: dependence on mass and age

Useful information from the inner layers of stellar pulsators may be derived from the study of their oscillations. In this paper we analyse three diagnostic tools suggested in the literature built from the oscillation frequencies computed for a set of main sequence models with masses between $1.0\, {\rm M}_{\odot}$ and $1.6\, {\rm M}_{\odot}$, to check what information they may hold about stellar cores. For the models with convective cores ($M \geq 1.2\,{\rm M}_{\odot}$) we find a relation between the frequency slopes of the diagnostic tools and the size of the jump in the sound speed at the edge of the core. We show that this relation is independent of the mass of the models. In practice, since the size of the jump in the sound speed is related to the age of the star, using these seismic tools we may, in principle, infer the star's evolutionary state. We also show that when combining two of the three diagnostic tools studied, we are able to distinguish models with convective cores from models without a convective core but with strong sound-speed gradients in the inner layers.

astro-ph.SR↗

Determining global parameters of the oscillations of solar-like stars

Helioseismology has enabled us to better understand the solar interior, while also allowing us to better constrain solar models. But now is a tremendous epoch for asteroseismology as space missions dedicated to studying stellar oscillations have been launched within the last years (MOST and CoRoT). CoRoT has already proved valuable results for many types of stars, while Kepler, which was launched in March 2009, will provide us with a huge number of seismic data very soon. This is an opportunity to better constrain stellar models and to finally understand stellar structure and evolution. The goal of this research work is to estimate the global parameters of any solar-like oscillating target in an automatic manner. We want to determine the global parameters of the acoustic modes (large separation, range of excited pressure modes, maximum amplitude, and its corresponding frequency), retrieve the surface rotation period of the star and use these results to estimate the global parameters of the star (radius and mass).To prepare the analysis of hundreds of solar-like oscillating stars, we have developed a robust and automatic pipeline. The pipeline consists of data analysis techniques, such as Fast Fourier Transform, wavelets, autocorrelation, as well as the application of minimisation algorithms for stellar-modelling. We apply our pipeline to some simulated lightcurves from the asteroFLAG team and the Aarhus-asteroFLAG simulator, and obtain results that are consistent with the input data to the simulations. Our strategy gives correct results for stars with magnitudes below 11 with only a few 10% of bad determinations among the reliable results. We then apply the pipeline to the Sun and three CoRoT targets.In particular we determine the parameters of the Sun, HD49933, HD181906, and HD181420.

astro-ph.SR↗

The solar-like CoRoT target HD 170987: spectroscopic and seismic observations

The CoRoT mission is in its third year of observation and the data from the second long run in the galactic centre direction are being analysed. The solar-like oscillating stars that have been observed up to now have given some interesting results, specially concerning the amplitudes that are lower than predicted. We present here the results from the analysis of the star HD 170987.The goal of this research work is to characterise the global parameters of HD 170987. We look for global seismic parameters such as the mean large separation, maximum amplitude of the modes, and surface rotation because the signal-to-noise ratio in the observations do not allow us to measure individual modes. We also want to retrieve the stellar parameters of the star and its chemical composition.We have studied the chemical composition of the star using ground-based observations performed with the NARVAL spectrograph. We have used several methods to calculate the global parameters from the acoustic oscillations based on CoRoT data. The light curve of the star has been interpolated using inpainting algorithms to reduce the effect of data gaps. We find power excess related to p modes in the range [400 - 1200]muHz with a mean large separation of 55.2+-0.8muHz with a probability above 95% that increases to 55.9 +-0.2muHz in a higher frequency range [500 - 1250] muHz and a rejection level of 1%. A hint of the variation of this quantity with frequency is also found. The rotation period of the star is estimated to be around 4.3 days with an inclination axis of i=50 deg +20/-13. We measure a bolometric amplitude per radial mode in a range [2.4 - 2.9] ppm around 1000 muHz. Finally, using a grid of models, we estimate the stellar mass, M=1.43+-0.05 Msun, the radius, R=1.96+-0.046 Rsun, and the age ~2.4 Gyr.

astro-ph.SR↗

An automatic pipeline analysing solar-like oscillating targets tested on CoRoT and simulated data

The launch of the Kepler mission on 7th March 2009 opened a new bright future for the search of extra-solar planets while a huge amount of stars will be observed leading to the opportunity to better understand stellar evolution. This will allow us to probe different regions in the HR diagram and put more constraints on the stellar models. Up to now the asteroseismic missions such as MOST and CoRoT were providing some solar-like stars at a very slow cadence. But to study the several hundreds of solar-like oscillating stars that will be observed during the Kepler survey phase, an analysis devoted to one star is impossible if we want to have as much information as we can in a small period of time. We describe here our pipeline, A2Z, which calculates the global parameters of the stars (rotation period, mean large spacing of the acoustic modes, maximum amplitude of the modes), fits the modes globally, and estimates the radius and mass of the stars. This pipeline has been tested on simulated stars and applied to real data from CoRoT.

astro-ph.SR↗

Preliminary results from the STEPHI2009 campaign on the open cluster NGC 1817

We present preliminary observational results of the multi-site STEPHI campaign on the cluster NGC 1817. The three observatories involved are San Pedro Martir (Mexico), Xing Long (China) and the Observatorio del Teide (Spain) - giving an ideal combination to maximise the duty cycle. The cluster has 12 known delta Scuti stars and at least two detached eclipsing binary systems. This combination of characteristics is ideal for extracting information about global parameters of the targets, which will in turn impose strict constraints on the stellar models. From an initial comparison with stellar models using the known fundamental parameters, and just the observed pulsation frequencies and measured effective temperatures, it appears that a lower value of initial helium mass fraction will most likely explain the observations of these stars.

astro-ph.SR↗

Ground-based observations of Kepler asteroseismic targets

We present the ground-based activities within the different working groups of the Kepler Asteroseismic Science Consortium (KASC). The activities aim at the systematic characterization of the 5000+ KASC targets, and at the collection of ground-based follow-up time-series data of selected promising Kepler pulsators. So far, 36 different instruments at 31 telescopes on 23 different observatories in 12 countries are in use, and a total of more than 530 observing nights has been awarded. (Based on observations made with the Isaac Newton Telescope, William Herschel Telescope, Nordic Optical Telescope, Telescopio Nazionale Galileo, Mercator Telescope (La Palma, Spain), and IAC-80 (Tenerife, Spain). Also based on observations taken at the observatories of Sierra Nevada, San Pedro Martir, Vienna, Xinglong, Apache Point, Lulin, Tautenburg, Loiano, Serra la Nave, Asiago, McDonald, Skinakas, Pic du Midi, Mauna Kea, Steward Observatory, Mt Wilson, Bialkow Observatory of the Wroclaw University, Piszkesteto Mountain Station, Observatoire de Haute Provence, and Centro Astronomico Hispano Aleman at Calar Alto. Based on data from the AAVSO International Database.)

astro-ph.SR↗

The asteroseismic potential of Kepler: first results for solar-type stars

We present preliminary asteroseismic results from Kepler on three G-type stars. The observations, made at one-minute cadence during the first 33.5d of science operations, reveal high signal-to-noise solar-like oscillation spectra in all three stars: About 20 modes of oscillation may be clearly distinguished in each star. We discuss the appearance of the oscillation spectra, use the frequencies and frequency separations to provide first results on the radii, masses and ages of the stars, and comment in the light of these results on prospects for inference on other solar-type stars that Kepler will observe.

astro-ph.SR↗

HD172189: another step in furnishing one of the best laboratories known for asteroseismic studies

HD172189 is a spectroscopic eclipsing binary system with a rapidly-rotating pulsating delta Scuti component. It is also a member of the open cluster IC4756. These combined characteristics make it an excellent laboratory for asteroseismic studies. To date, HD172189 has been analysed in detail photometrically but not spectroscopically. For this reason we have compiled a set of spectroscopic data to determine the absolute and atmospheric parameters of the components. We determined the radial velocities (RV) of both components using four different techniques. We disentangled the binary spectra using KOREL, and performed the first abundance analysis on both disentangled spectra. By combining the spectroscopic results and the photometric data, we obtained the component masses, 1.8 and 1.7 solar masses, and radii, 4.0 and 2.4 solar radii, for inclination i = 73.2 degrees, eccentricity e = 0.28, and orbital period 5.70198 days. Effective temperatures of 7600 K and 8100 K were also determined. The measured vsini are 78 and 74 km/s, respectively, giving rotational periods of 2.50 and 1.55 days for the components. The abundance analysis shows [Fe/H] = -0.28 for the primary (pulsating) star, consistent with observations of IC4756. We also present an assessment of the different analysis techniques used to obtain the RVs and the global parameters.

astro-ph.SR↗

A Stellar Model-fitting Pipeline for Solar-like Oscillations

Over the past two decades, helioseismology has revolutionized our understanding of the interior structure and dynamics of the Sun. Asteroseismology will soon place this knowledge into a broader context by providing structural data for hundreds of Sun-like stars. Solar-like oscillations have already been detected from the ground in several stars, and NASA's Kepler mission is poised to unleash a flood of stellar pulsation data. Deriving reliable asteroseismic information from these observations demands a significant improvement in our analysis methods. We report the initial results of our efforts to develop an objective stellar model-fitting pipeline for asteroseismic data. The cornerstone of our automated approach is an optimization method using a parallel genetic algorithm. We describe the details of the pipeline and we present the initial application to Sun-as-a-star data, yielding an optimal model that accurately reproduces the known solar properties.

astro-ph.SR↗

Radius determination of solar-type stars using asteroseismology: What to expect from the Kepler mission

For distant stars, as observed by the NASA Kepler satellite, parallax information is currently of fairly low quality and is not complete. This limits the precision with which the absolute sizes of the stars and their potential transiting planets can be determined by traditional methods. Asteroseismology will be used to aid the radius determination of stars observed during NASA's Kepler mission. We report on the recent asteroFLAG hare-and-hounds Exercise#2, where a group of `hares' simulated data of F-K main-sequence stars that a group of `hounds' sought to analyze, aimed at determining the stellar radii. Based on the asteroseismic large frequency spacing, obtained from simulations of 4-year time series data from the Kepler mission, we demonstrate that the stellar radii can be correctly and precisely determined, when combined with traditional stellar parameters from the Kepler Input Catalogue. The radii found by the various methods used by each independent hound generally agree with the true values of the artificial stars to within 3%, when the large frequency spacing is used. This is 5--10 times better than the results where seismology is not applied. These results give strong confidence that radius estimation can be performed to better than 3% for solar-like stars using automatic pipeline reduction. Even when the stellar distance and luminosity are unknown we can obtain the same level of agreement.

astro-ph.SR↗

A Stellar Model-fitting Pipeline for Asteroseismic Data from the Kepler Mission

Over the past two decades, helioseismology has revolutionized our understanding of the interior structure and dynamics of the Sun. Asteroseismology will soon place this knowledge into a broader context by providing structural data for hundreds of Sun-like stars. Solar-like oscillations have already been detected from the ground in several stars, and NASA's Kepler mission is poised to unleash a flood of stellar pulsation data. Deriving reliable asteroseismic information from these observations demands a significant improvement in our analysis methods. In this paper we report the initial results of our efforts to develop an objective stellar model-fitting pipeline for asteroseismic data. The cornerstone of our automated approach is an optimization method using a parallel genetic algorithm. We describe the details of the pipeline and we present the initial application to Sun-as-a-star data, yielding an optimal model that accurately reproduces the known solar properties.

astro-ph.SR↗

A semi-automatic procedure for abundance determination of A- and F-type stars

A variety of physical processes leading to different types of pulsations and chemical compositions is observed among A- and F-type stars. To investigate the underlying mechanisms responsible for these processes in stars with similar locations in the H-R diagram, an accurate abundance determination is needed, among others. Here, we describe a semi-automatic procedure developed to determine chemical abundances of various elements ranging from helium to mercury for this type of stars. We test our procedure on synthetic spectra, demonstrating that our procedure provides abundances consistent with the input values, even when the stellar parameters are offset by reasonable observational errors. For a fast-rotating star such as Vega, our analysis is consistent with those carried out with other plane-parallel model atmospheres. Simulations show that the offsets from the input abundances increase for stars with low inclination angle of about 4 degrees. For this inclination angle, we also show that the distribution of the iron abundance found in different regions is bimodal. Furthermore, the effect of rapid rotation can be seen in the peculiar behaviour of the H_beta line.

astro-ph.SR↗

Asteroseismology and Interferometry

Asteroseismology provides us with a unique opportunity to improve our understanding of stellar structure and evolution. Recent developments, including the first systematic studies of solar-like pulsators, have boosted the impact of this field of research within Astrophysics and have led to a significant increase in the size of the research community. In the present paper we start by reviewing the basic observational and theoretical properties of classical and solar-like pulsators and present results from some of the most recent and outstanding studies of these stars. We centre our review on those classes of pulsators for which interferometric studies are expected to provide a significant input. We discuss current limitations to asteroseismic studies, including difficulties in mode identification and in the accurate determination of global parameters of pulsating stars, and, after a brief review of those aspects of interferometry that are most relevant in this context, anticipate how interferometric observations may contribute to overcome these limitations. Moreover, we present results of recent pilot studies of pulsating stars involving both asteroseismic and interferometric constraints and look into the future, summarizing ongoing efforts concerning the development of future instruments and satellite missions which are expected to have an impact in this field of research.

astro-ph↗

AsteroFLAG: first results from hare-and-hounds Exercise 1

We report on initial results from the first phase of Exercise 1 of the asteroFLAG hare and hounds. The asteroFLAG group is helping to prepare for the asteroseismology component of NASA's Kepler mission, and the first phase of Exercise 1 is concerned with testing extraction of estimates of the large and small frequency spacings of the low-degree p modes from Kepler-like artificial data. These seismic frequency spacings will provide key input for complementing the exoplanet search data.

astro-ph↗

The complementary roles of interferometry and asteroseismology in determining the mass of solar-type stars

How important is an independent diameter measurement for the determination of stellar parameters of solar-type stars? When coupled with seismic observables, how well can we determine the stellar mass? If we can determine the radius of the star to between 1% and 4%, how does this affect the theoretical uncertainties? Interferometry can provide an independent radius determination and it has been suggested that we should expect at least a 4% precision on such a measurement for nearby solar-type stars. This study aims to provide both qualitative and quantitive answers to these questions for a star such as our Sun, where seismic information will be available. We show that the importance of an independent radius measurement depends on the combination of observables available and the size of the measurement errors. It is important for determining all stellar parameters and in particular the mass, where a good radius measurement can even allow us to determine the mass with a precision better than 2%. Our results also show that measuring the small frequency separation significantly improves the determination of the evolutionary stage and the mixing-length parameter.

astro-ph↗