arXiv subjects

O. Witasse

Publications and source records attributed to O. Witasse.

16 recordsLinked to original sources

arXiv2025

Comparing observations of the closely located JUICE and STEREO-A spacecraft during the widespread solar energetic particle event of 2024 May 13

JUICE was launched in April 2023, and it is now in its cruise phase to Jupiter, where it is scheduled to arrive in July 2031. JUICE carries a radiation monitor, namely the RADiation hard Electron Monitor (RADEM) to measure protons, electrons, and ions, detecting particles coming mainly from the anti-Sun direction. On 2024 May 13, a large solar energetic particle (SEP) event took place in association with an eruption close to the western limb of the Sun as seen from Earth. Providentially, at that time JUICE was located very close to STEREO-A, being separated by 0.13 au in radial distance, 0.3 deg in latitude, and 1.6 deg in longitude. Methods. We analysed the IP context using in-situ measurements and studied the proton anisotropies measured by near-Earth spacecraft and STEREO-A. We focused on an isotropic period during the decay phase of the SEP event to compute the proton energy spectrum. We fit the STEREO-A spectrum and compared it to that measured by SOHO and JUICE. Conclusions. The RADEM instrument aboard JUICE is a valuable tool for measuring SEP events in the heliosphere, providing an excellent opportunity to study and characterise the energetic particle environment in the solar wind between 0.65 and 5.2 au. The intercalibration factors between the fluxes measured by STEREO-A and JUICE at the effective energies of 6.9 MeV, 13.3 MeV, 21.6 MeV, and 31.2 MeV are 1.02, 1.23, 1.12, and 0.95 respectively. These intercalibration factors are valid only until 2024 July 10, when the configuration of the RADEM instrument was changed.

astro-ph.SR↗

arXiv2021

Reply to comment on "An Active Plume Eruption on Europa During Galileo Flyby E26 as Indicated by Energetic Proton Depletions"

In Huybrighs et al., 2020 we investigated energetic proton depletions along Galileo's Europa flyby E26. Based on a particle tracing analysis we proposed that depletions are caused by perturbed electrogmagnetic fields combined with atmospheric charge exchange and possible plumes. One depletion feature identified as a plume signature was shown to be an artefact Jia et al., 2021. Despite that, here we emphasize that Huybrighs et al., 2020 demonstrates that plumes can cause proton depletions and that these features should be sought after. Furthermore, the conclusions on the importance of perturbed electromagnetic fields and atmospheric charge exchange on the depletions are unaffected. We suggest that the artefact's cause is a mistagging of protons as heavier ions by EPD. The artefact prevents us from confirming or excluding that there is a plume associated depletion. We also address comments on the MHD simulations and demonstrate that 540-1040 keV losses are not necessarily inconsistent with 115-244 keV losses by plume associated charge exchange.

astro-ph.EP↗

arXiv2021

(216) Kleopatra, a low density critically rotating M-type asteroid

Context. The recent estimates of the 3D shape of the M/Xe-type triple asteroid system (216) Kleopatra indicated a density of 5 g.cm$^{-3}$. Such a high density implies a high metal content and a low porosity which is not easy to reconcile with its peculiar dumbbell shape. Aims. Given the unprecedented angular resolution of the VLT/SPHERE/ZIMPOL camera, we aim to constrain the mass and the shape of Kleopatra with high accuracy, hence its density. Methods. We combined our new VLT/SPHERE observations of Kleopatra recorded in 2017 and 2018 with archival data, as well as lightcurve, occultation, and delay-Doppler images, to derive its 3D shape model using two different algorithms (ADAM, MPCD). Furthermore, an N-body dynamical model allowed us to retrieve the orbital elements of the two moons as explained in the accompanying paper. Results. The shape of Kleopatra is very close to an equilibrium dumbbell figure with two lobes and a thick neck. Its volume equivalent diameter (118.75$\pm$1.40) km and mass (2.97$\pm$0.32) 10$^{18}$ kg imply a bulk density of (3.38$\pm$0.50) g cm$^{-3}$. Such a low density for a supposedly metal-rich body indicates a substantial porosity within the primary. This porous structure along with its near-equilibrium shape is compatible with a formation scenario including a giant impact followed by reaccumulation. Kleopatra's current rotation period and dumbbell shape imply that it is in a critically rotating state. The low effective gravity along the equator of the body, together with the equatorial orbits of the moons and possibly rubble-pile structure, opens the possibility that the moons formed via mass shedding. Conclusions. Kleopatra is a puzzling multiple system due to the unique characteristics of the primary. It deserves particular attention in the future, with the Extremely Large Telescopes and possibly a dedicated space mission.

astro-ph.EP↗

arXiv2021

An advanced multipole model for (216) Kleopatra triple system

To interpret adaptive-optics observations of (216) Kleopatra, we need to describe an evolution of multiple moons, orbiting an extremely irregular body and including their mutual interactions. Such orbits are generally non-Keplerian and orbital elements are not constants. Consequently, we use a modified $N$-body integrator, which was significantly extended to include the multipole expansion of the gravitational field up to the order $\ell = 10$. Its convergence was verified against the `brute-force' algorithm. We computed the coefficients $C_{\ell m},S_{\!\ell m}$ for Kleopatra's shape, assuming a~constant bulk density. For solar-system applications, it was also necessary to implement a variable distance and geometry of observations. Our $χ^2$ metric then accounts for the absolute astrometry, the relative astrometry (2nd moon with respect to 1st), angular velocities, and also silhouettes, constraining the pole orientation. This allowed us to derive the orbital elements of Kleopatra's two moons. Using both archival astrometric data and new VLT/SPHERE observations (ESO LP 199.C-0074), we were able to identify the true periods of the moons, $P_1 = (1.822359\pm0.004156)\,{\rm d}$, $P_2 = (2.745820\pm0.004820)\,{\rm d}$. They orbit very close to the 3:2 mean-motion resonance, but their osculating eccentricities are too small compared to other perturbations (multipole, mutual), so that regular librations of the critical argument are not present. The resulting mass of Kleopatra, $m_1 = (1.49\pm0.16)\cdot10^{-12}\,M_\odot$ or $2.97\cdot10^{18}\,{\rm kg}$, is significantly lower than previously thought. An implication explained in the accompanying paper (Marchis et al.) is that (216) Kleopatra is a critically rotating body.

astro-ph.EP↗

arXiv2021

Evidence for differentiation of the most primitive small bodies

Dynamical models of Solar System evolution have suggested that P-/D-type volatile-rich asteroids formed in the outer Solar System and may be genetically related to the Jupiter Trojans, the comets and small KBOs. Indeed, their spectral properties resemble that of anhydrous cometary dust. High-angular-resolution images of P-type asteroid (87) Sylvia with VLT/SPHERE were used to reconstruct its 3D shape, and to study the dynamics of its two satellites. We also model Sylvia's thermal evolution. The shape of Sylvia appears flattened and elongated. We derive a volume-equivalent diameter of 271 +/- 5 km, and a low density of 1378 +/- 45 kg.m-3. The two satellites orbit Sylvia on circular, equatorial orbits. The oblateness of Sylvia should imply a detectable nodal precession which contrasts with the fully-Keplerian dynamics of the satellites. This reveals an inhomogeneous internal structure, suggesting that Sylvia is differentiated. Sylvia's low density and differentiated interior can be explained by partial melting and mass redistribution through water percolation. The outer shell would be composed of material similar to interplanetary dust particles (IDPs) and the core similar to aqueously altered IDPs or carbonaceous chondrite meteorites such as the Tagish Lake meteorite. Numerical simulations of the thermal evolution of Sylvia show that for a body of such size, partial melting was unavoidable due to the decay of long-lived radionuclides. In addition, we show that bodies as small as 130-150 km in diameter should have followed a similar thermal evolution, while smaller objects, such as comets and the KBO Arrokoth, must have remained pristine, in agreement with in situ observations of these bodies. NASA Lucy mission target (617) Patroclus (diameter~140 km) may, however, be differentiated.

astro-ph.EP↗

arXiv2020

Binary asteroid (31) Euphrosyne: Ice-rich and nearly spherical

Asteroid (31) Euphrosyne is one of the biggest objects in the asteroid main belt and the Euphrosyne family occupies a highly inclined region in the outer main belt and contains a remarkably large number of members, which is interpreted as an outcome of a disruptive cratering event. The goals of this adaptive-optics imaging study were threefold: to characterize the shape of Euphrosyne, to constrain its density, and to search for the large craters that may be associated with the family formation event. We obtained disk-resolved images of Euphrosyne using SPHERE/ZIMPOL at ESO's 8.2-m VLT as part of our large program (ID: 199.C-0074, PI: Vernazza). We reconstructed its 3D-shape using the adam shape modeling algorithm based on the SPHERE images and the available lightcurves of this asteroid. We analyzed the dynamics of the satellite with the genoid meta-heuristic algorithm. Finally, we studied the shape of Euphrosyne using hydrostatic equilibrium models. Our SPHERE observations show that Euphrosyne has a nearly spherical shape with the sphericity index of 0.9888 and its surface lacks large impact craters. Euphrosyne's diameter is 268+/-6 km, making it one of the top 10 largest main belt asteroids. We detected a satellite of Euphrosyne -- S/2019 (31) 1-- that is about 4 km across, on an circular orbit. The mass determined from the orbit of the satellite together with the volume computed from the shape model imply a density of 1665+/-242 kg/m^3, suggesting that Euphrosyne probably contain a large fraction of water ice in its interior. We find that the spherical shape of Euphrosyne is a result of the reaccumulation process following the impact, as in the case of (10) Hygiea. However, our shape analysis reveals that, contrary to Hygiea, the axis ratios of Euphrosyne significantly differ from the ones suggested by fluid hydrostatic equilibrium following reaccumulation.

astro-ph.EP↗

arXiv2019

(704) Interamnia: A transitional object between a dwarf planet and a typical irregular-shaped minor body

With an estimated diameter in the 320 to 350 km range, (704) Interamnia is the fifth largest main belt asteroid and one of the few bodies that fills the gap in size between the four largest bodies with $D$ > 400 km (Ceres, Vesta, Pallas and Hygiea) and the numerous smaller bodies with $D$ $\lesssim$ 200 km. However, despite its large size, little is known about the shape and spin state of Interamnia and, therefore, about its bulk composition and past collisional evolution. We aimed to test at what size and mass the shape of a small body departs from a nearly ellipsoidal equilibrium shape (as observed in the case of the four largest asteroids) to an irregular shape as routinely observed in the case of smaller ($D$ $\lesssim$ 200 km) bodies. We observed Interamnia as part of our ESO VLT/SPHERE large program (ID: 199.C-0074) at thirteen different epochs. In addition, several new optical lightcurves were recorded. These data, along with stellar occultation data from the literature, were fed to the All-Data Asteroid Modeling (ADAM) algorithm to reconstruct the 3D-shape model of Interamnia and to determine its spin state. Interamnia's volume-equivalent diameter of 332 $\pm$ 6 km implies a bulk density of $ρ$=1.98 $\pm$ 0.68 gcm$^{-3}$ , which suggests that Interamnia - like Ceres and Hygiea - contains a high fraction of water ice, consistent with the paucity of apparent craters. Our observations reveal a shape that can be well approximated by an ellipsoid, and that is compatible with a fluid hydrostatic equilibrium at the 2 $σ$ level. The rather regular shape of Interamnia implies that the size and mass limit, under which the shapes of minor bodies with a high amount of water ice in the subsurface become irregular, has to be searched among smaller ($D$ $\lesssim$ 300km) less massive ($m$ $\lesssim$ 3x10$^{19}$ kg) bodies.

astro-ph.EP↗

arXiv2019

The shape of (7) Iris as evidence of an ancient large impact?

Asteroid (7) Iris is an ideal target for disk-resolved imaging owing to its brightness (V$\sim$7-8) and large angular size of 0.33 arcsec during its apparitions. Iris is believed to belong to the category of large unfragmented asteroids that avoided internal differentiation, implying that its current shape and topography may record the first few 100 Myr of the solar system's collisional evolution. We recovered information about the shape and surface topography of Iris from disk-resolved VLT/SPHERE/ZIMPOL images acquired in the frame of our ESO large program. We used the All-Data Asteroid Modeling (ADAM) shape reconstruction algorithm to model the 3D shape of Iris, using optical disk-integrated data and disk-resolved images from SPHERE as inputs. We analyzed the SPHERE images to infer the asteroid's global shape and the morphology of its main craters. We present the volume-equivalent diameter D$_{\rm eq}$=214$\pm$5 km, and bulk density $ρ$=2.7$\pm$0.3 g cm$^{-3}$ of Iris. Its shape appears to be consistent with that of an oblate spheroid with a large equatorial excavation. We identified eight putative surface features 20--40 km in diameter detected at several epochs, which we interpret as impact craters. Craters on Iris have depth-to-diameter ratios that are similar to those of analogous 10 km craters on Vesta. The bulk density of Iris is consistent with that of its meteoritic analog, namely LL ordinary chondrites. Considering the absence of a collisional family related to Iris and the number of large craters on its surface, we suggest that its equatorial depression may be the remnant of an ancient (at least 3 Gyr) impact. Iris's shape further opens the possibility that large planetesimals formed as almost perfect oblate spheroids. Finally, we attribute the difference in crater morphology between Iris and Vesta to their different surface gravities.

astro-ph.EP↗

arXiv2019

Closing the gap between Earth-based and interplanetary mission observations: Vesta seen by VLT/SPHERE

Context. Over the past decades, several interplanetary missions have studied small bodies in situ, leading to major advances in our understanding of their geological and geophysical properties. These missions, however, have had a limited number of targets. Among them, the NASA Dawn mission has characterised in detail the topography and albedo variegation across the surface of asteroid (4) Vesta down to a spatial resolution of approximately 20 m/pixel scale. Aims. Here our aim was to determine how much topographic and albedo information can be retrieved from the ground with VLT/SPHERE in the case of Vesta, having a former space mission (Dawn) providing us with the ground truth that can be used as a benchmark. Methods. We observed Vesta with VLT/SPHERE/ZIMPOL as part of our ESO large programme (ID 199.C-0074) at six different epochs, and deconvolved the collected images with a parametric point spread function (PSF). We then compared our images with synthetic views of Vesta generated from the 3D shape model of the Dawn mission, on which we projected Vesta's albedo information. Results. We show that the deconvolution of the VLT/SPHERE images with a parametric PSF allows the retrieval of the main topographic and albedo features present across the surface of Vesta down to a spatial resolution of approximately 20-30 km. Contour extraction shows an accuracy of approximately 1 pixel (3.6 mas). The present study provides the very first quantitative estimate of the accuracy of ground-based adaptive-optics imaging observations of asteroid surfaces. Conclusions. In the case of Vesta, the upcoming generation of 30-40m telescopes (ELT, TMT, GMT) should in principle be able to resolve all of the main features present across its surface, including the troughs and the north-south crater dichotomy, provided that they operate at the diffraction limit.

astro-ph.EP↗

arXiv2019

The homogeneous internal structure of CM-like asteroid (41) Daphne

Context. CM-like asteroids (Ch and Cgh classes) are a major population within the broader C-complex, encompassing about 10% of the mass of the main asteroid belt. Their internal structure has been predicted to be homogeneous, based on their compositional similarity as inferred from spectroscopy (Vernazza et al., 2016, AJ 152, 154) and numerical modeling of their early thermal evolution (Bland & Travis, 2017, Sci. Adv. 3, e1602514). Aims. Here we aim to test this hypothesis by deriving the density of the CM-like asteroid (41) Daphne from detailed modeling of its shape and the orbit of its small satellite. Methods. We observed Daphne and its satellite within our imaging survey with the Very Large Telescope extreme adaptive-optics SPHERE/ZIMPOL camera (ID 199.C-0074, PI P. Vernazza) and complemented this data set with earlier Keck/NIRC2 and VLT/NACO observations. We analyzed the dynamics of the satellite with our Genoid meta-heuristic algorithm. Combining our high-angular resolution images with optical lightcurves and stellar occultations, we determine the spin period, orientation, and 3-D shape, using our ADAM shape modeling algorithm. Results. The satellite orbits Daphne on an equatorial, quasi-circular, prograde orbit, like the satellites of many other large main-belt asteroids. The shape model of Daphne reveals several large flat areas that could be large impact craters. The mass determined from this orbit combined with the volume computed from the shape model implies a density for Daphne of 1.77+/-0.26 g/cm3 (3 σ). This density is consistent with a primordial CM-like homogeneous internal structure with some level of macroporosity (~17%). Conclusions. Based on our analysis of the density of Daphne and 75 other Ch/Cgh-type asteroids gathered from the literature, we conclude that the primordial internal structure of the CM parent bodies was homogeneous.

astro-ph.EP↗

arXiv2018

(16) Psyche: A mesosiderite-like asteroid?

Asteroid (16) Psyche is the target of the NASA Psyche mission. It is considered one of the few main-belt bodies that could be an exposed proto-planetary metallic core and that would thus be related to iron meteorites. Such an association is however challenged by both its near- and mid-infrared spectral properties and the reported estimates of its density. Here, we aim to refine the density of (16) Psyche to set further constraints on its bulk composition and determine its potential meteoritic analog. We observed (16) Psyche with ESO VLT/SPHERE/ZIMPOL as part of our large program (ID 199.C-0074). We used the high angular resolution of these observations to refine Psyche's three-dimensional (3D) shape model and subsequently its density when combined with the most recent mass estimates. In addition, we searched for potential companions around the asteroid. We derived a bulk density of 3.99\,$\pm$\,0.26\,g$\cdot$cm$^{-3}$ for Psyche. While such density is incompatible at the 3-sigma level with any iron meteorites ($\sim$7.8\,g$\cdot$cm$^{-3}$), it appears fully consistent with that of stony-iron meteorites such as mesosiderites (density $\sim$4.25\,$\cdot$cm$^{-3}$). In addition, we found no satellite in our images and set an upper limit on the diameter of any non-detected satellite of 1460\,$\pm$\,200}\,m at 150\,km from Psyche (0.2\%\,$\times$\,R$_{Hill}$, the Hill radius) and 800\,$\pm$\,200\,m at 2,000\,km (3\%\,$\times$\,$R_{Hill}$). Considering that the visible and near-infrared spectral properties of mesosiderites are similar to those of Psyche, there is merit to a long-published initial hypothesis that Psyche could be a plausible candidate parent body for mesosiderites.

astro-ph.EP↗

arXiv2016

Plasma observations during the Mars atmospheric "plume" event of March-April 2012

We present initial analysis and conclusions from plasma observations made during the reported "Mars plume event" of March - April 2012. During this period, multiple independent amateur observers detected a localized, high-altitude "plume" over the Martian dawn terminator [Sanchez-Lavega et al., Nature, 2015, doi:10.1038/nature14162], the cause of which remains to be explained. The estimated brightness of the plume exceeds that expected for auroral emissions, and its projected altitude greatly exceeds that at which clouds are expected to form. We report on in-situ measurements of ionospheric plasma density and solar wind parameters throughout this interval made by Mars Express, obtained over the same surface region, but at the opposing terminator. Measurements in the ionosphere at the corresponding location frequently show a disturbed structure, though this is not atypical for such regions with intense crustal magnetic fields. We tentatively conclude that the formation and/or transport of this plume to the altitudes where it was observed could be due in part to the result of a large interplanetary coronal mass ejection (ICME) encountering the Martian system. Interestingly, we note that the only similar plume detection in May 1997 may also have been associated with a large ICME impact at Mars.

physics.space-ph↗

arXiv2015

Long-term activity and outburst of comet C/2013 A1 (Siding Spring) from narrow-band photometry and long-slit spectroscopy

In this paper, we present a unique data set of more than one year's worth of regular observations of comet C/2013 A1(Siding Spring) with TRAPPIST in Chile, along with low-resolution spectra obtained with the ESO/VLT FORS 2 instrument. The comet made a close approach to Mars on October 19, 2014 and was then observed by many space and ground-based telescopes. We followed the evolution of the OH, NH, CN, $\mathrm{C_3}$, and $\mathrm{C_2}$ production rates as well as the $Afρ$ parameter as a proxy for the dust production. We detected an outburst two weeks after perihelion, with gas and dust production rates being multiplied by a factor five within a few days. By modelling the shape of the CN and $\mathrm{C_2}$ radial profiles, we determined that the outburst happened around on November 10 around 15:30 UT ($\pm$ 5h) and measured a gas ejection velocity of $1.1\pm0.2$ km/s. We used a thermal evolution model to reproduce the activity pattern and outburst. Our results are consistent with the progressive formation of a dust mantle explaining the shallow dependence of gas production rates, which may be partially blown off during the outburst. We studied the evolution of gas composition, using various ratios such as CN/OH, $\mathrm{C_2}$/OH, or $\mathrm{C_3}$/OH, which showed little or no variation with heliocentric distance including at the time of the outburst. This indicates a relative level of homogeneity of the nucleus composition.

astro-ph.EP↗

arXiv2013

Limb imaging of the Venus O2 visible nightglow with the Venus Monitoring Camera

We investigated the Venus O2 visible nightglow with imagery from the Venus Monitoring Camera on Venus Express. Drawing from data collected between April 2007 and January 2011, we study the global distribution of this emission, discovered in the late 70s by the Venera 9 and 10 missions. The inferred limb-viewing intensities are on the order of 150 kiloRayleighs at the lower latitudes and seem to drop somewhat towards the poles. The emission is generally stable, although there are episodes when the intensities rise up to 500 kR. We compare a set of Venus Monitoring Camera observations with coincident measurements of the O2 nightglow at 1.27 μm made with the Visible and Infrared Thermal Imaging Spectrometer, also on Venus Express. From the evidence gathered in this and past works, we suggest a direct correlation between the instantaneous emissions from the two O2 nightglow systems. Possible implications regarding the uncertain origin of the atomic oxygen green line at 557.7 nm are noted.

astro-ph.EP↗

arXiv2007

Habitat of early life: Solar X-ray and UV radiation at Earth's surface 4-3.5 billion years ago

Solar X-ray and UV radiation (0.1-320 nm) received at Earth's surface is an important aspect of the circumstances under which life formed on Earth. The quantity that is received depends on two main variables: the emission of radiation by the young Sun and its extinction through absorption and scattering by the Earth's early atmosphere. The spectrum emitted by the Sun when life formed, between 4 and 3.5 Ga, was modeled here, including the effects of flares and activity cycles, using a solar-like star that has the same age now as the Sun had 4-3.5 Ga. Atmospheric extinction was calculated using the Beer-Lambert law, assuming several density profiles for the atmosphere of the Archean Earth. We found that almost all radiation with a wavelength shorter than 200 nm is attenuated effectively, even by very tenuous atmospheres. Longer-wavelength radiation is progressively less well attenuated, and its extinction is more sensitive to atmospheric composition. Minor atmospheric components, such as methane, ozone, water vapor, etc., have only negligible effects, but changes in CO2 concentration can cause large differences in surface flux. Differences due to variability in solar emission are small compared to this. In all cases surface radiation levels on the Archean Earth were several orders of magnitude higher in the 200-300 nm wavelength range than current levels in this range. That means that any form of life that might have been present at Earth's surface 4-3.5 Ga must have been exposed to much higher quantities of damaging radiation than at present.

astro-ph↗

arXiv1998

Hubble constant from sosie galaxies and HIPPARCOS geometrical calibration

New distances, larger than previous ones, have been obtained for M 31 and M 81 based on the geometrical zero-point of the Cepheid Period-luminosity relation provided by the HIPPARCOS satellite. By combining them with independent determinations we define reasonable ranges for the distances of these important calibrating galaxies. On this basis, we determine the Hubble constant from the method of sosies (look-alike) galaxies, galaxies having the same characteristics than the calibrators. The method is quite secure because it is purely differential and it does not depend on any assumption (apart from the natural one that two sosies galaxies have similar absolute luminosities). Nevertheless, the Malmquist bias has to be taken into account. The observations behave exactly as predicted from the analytical formulation of the bias. Thus, rejecting galaxies which are affected by the Malmquist bias we derive the Hubble constant: H_o = 60 +- 10 (external) km.s^{-1}.Mpc^{-1} If we strictly use the calibration obtained with HIPPARCOS and if the bias found in the Period-Luminosity Relation is considered, the Hubble constant is smaller than this ($\approx 55 km.s^{-1}.Mpc^{-1}$). This gives arguments in favour of the long-distance scale. We briefly discuss possible improvements aiming at still reducing the uncertainty.

astro-ph↗