arXiv subjects

Oguz Ergin

Publications and source records attributed to Oguz Ergin.

9 recordsLinked to original sources

arXiv2026

In-DRAM Signature Generation Using Simultaneous Multiple-Row Activation: An Experimental Study of Off-The-Shelf DRAM Chips

We experimentally demonstrate that it is possible to generate unique, repeatable, and device-specific signatures suitable for use as Physical Unclonable Function (PUF) responses in commercial off-the-shelf (COTS) DRAM chips by leveraging simultaneous multiple-row activation (SiMRA). Based on a rigorous experimental characterization of 112 modern DDR4 DRAM chips (from 10 modules), we introduce SiMRA-PUF, the first DRAM-based PUF that uses SiMRA-generated signatures as PUF responses. We analyze SiMRA-PUF in terms of reliability, uniqueness, and evaluation latency for varying numbers of simultaneously activated DRAM rows (i.e., 2, 4, 8, 16, and 32), DRAM chip density & die revision, and evaluate how temperature affects the similarity of SiMRA-generated responses. Among our 8 key experimental observations, we highlight two major results. First, SiMRA-PUF provides average intra-Jaccard indices of 89.02%, 89.81%, 93.03%, 94.06%, and 94.86%, and average inter-Jaccard indices of 3.98%, 2.37%, 3.44%, 2.92%, and 3.24% for 2-, 4-, 8-, 16-, and 32-row activations, respectively, showing that SiMRA-generated signatures are both repeatable within a device and unique across devices. Second, 2-row activation-based SiMRA-PUF provides 5.75% lower evaluation latency than the state-of-the-art DRAM-based PUF. We open-source our infrastructure and datasets at https://github.com/CMU-SAFARI/SiMRA-PUF.

cs.AR↗

arXiv2024

Sectored DRAM: A Practical Energy-Efficient and High-Performance Fine-Grained DRAM Architecture

We propose Sectored DRAM, a new, low-overhead DRAM substrate that reduces wasted energy by enabling fine-grained DRAM data transfers and DRAM row activation. Sectored DRAM leverages two key ideas to enable fine-grained data transfers and row activation at low chip area cost. First, a cache block transfer between main memory and the memory controller happens in a fixed number of clock cycles where only a small portion of the cache block (a word) is transferred in each cycle. Sectored DRAM augments the memory controller and the DRAM chip to execute cache block transfers in a variable number of clock cycles based on the workload access pattern with minor modifications to the memory controller's and the DRAM chip's circuitry. Second, a large DRAM row, by design, is already partitioned into smaller independent physically isolated regions. Sectored DRAM provides the memory controller with the ability to activate each such region based on the workload access pattern via small modifications to the DRAM chip's array access circuitry. Activating smaller regions of a large row relaxes DRAM power delivery constraints and allows the memory controller to schedule DRAM accesses faster. Compared to a system with coarse-grained DRAM, Sectored DRAM reduces the DRAM energy consumption of highly-memory-intensive workloads by up to (on average) 33% (20%) while improving their performance by up to (on average) 36% (17%). Sectored DRAM's DRAM energy savings, combined with its system performance improvement, allows system-wide energy savings of up to 23%. Sectored DRAM's DRAM chip area overhead is 1.7% the area of a modern DDR4 chip. We hope and believe that Sectored DRAM's ideas and results will help to enable more efficient and high-performance memory systems. To this end, we open source Sectored DRAM at https://github.com/CMU-SAFARI/Sectored-DRAM.

cs.AR↗

arXiv2022

PiDRAM: An FPGA-based Framework for End-to-end Evaluation of Processing-in-DRAM Techniques

DRAM-based main memory is used in nearly all computing systems as a major component. One way of overcoming the main memory bottleneck is to move computation near memory, a paradigm known as processing-in-memory (PiM). Recent PiM techniques provide a promising way to improve the performance and energy efficiency of existing and future systems at no additional DRAM hardware cost. We develop the Processing-in-DRAM (PiDRAM) framework, the first flexible, end-to-end, and open source framework that enables system integration studies and evaluation of real PiM techniques using real DRAM chips. We demonstrate a prototype of PiDRAM on an FPGA-based platform (Xilinx ZC706) that implements an open-source RISC-V system (Rocket Chip). To demonstrate the flexibility and ease of use of PiDRAM, we implement two PiM techniques: (1) RowClone, an in-DRAM copy and initialization mechanism (using command sequences proposed by ComputeDRAM), and (2) D-RaNGe, an in-DRAM true random number generator based on DRAM activation-latency failures. Our end-to-end evaluation of RowClone shows up to 14.6X speedup for copy and 12.6X initialization operations over CPU copy (i.e., conventional memcpy) and initialization (i.e., conventional calloc) operations. Our implementation of D-RaNGe provides high throughput true random numbers, reaching 8.30 Mb/s throughput. Over the Verilog and C++ basis provided by PiDRAM, implementing the required hardware and software components, implementing RowClone end-to-end takes 198 (565) and implementing D-RaNGe end-to-end takes 190 (78) lines of Verilog (C++) code. PiDRAM is open sourced on Github: https://github.com/CMU-SAFARI/PiDRAM.

cs.AR↗

arXiv2020

An Experimental Study of Reduced-Voltage Operation in Modern FPGAs for Neural Network Acceleration

We empirically evaluate an undervolting technique, i.e., underscaling the circuit supply voltage below the nominal level, to improve the power-efficiency of Convolutional Neural Network (CNN) accelerators mapped to Field Programmable Gate Arrays (FPGAs). Undervolting below a safe voltage level can lead to timing faults due to excessive circuit latency increase. We evaluate the reliability-power trade-off for such accelerators. Specifically, we experimentally study the reduced-voltage operation of multiple components of real FPGAs, characterize the corresponding reliability behavior of CNN accelerators, propose techniques to minimize the drawbacks of reduced-voltage operation, and combine undervolting with architectural CNN optimization techniques, i.e., quantization and pruning. We investigate the effect of environmental temperature on the reliability-power trade-off of such accelerators. We perform experiments on three identical samples of modern Xilinx ZCU102 FPGA platforms with five state-of-the-art image classification CNN benchmarks. This approach allows us to study the effects of our undervolting technique for both software and hardware variability. We achieve more than 3X power-efficiency (GOPs/W) gain via undervolting. 2.6X of this gain is the result of eliminating the voltage guardband region, i.e., the safe voltage region below the nominal level that is set by FPGA vendor to ensure correct functionality in worst-case environmental and circuit conditions. 43% of the power-efficiency gain is due to further undervolting below the guardband, which comes at the cost of accuracy loss in the CNN accelerator. We evaluate an effective frequency underscaling technique that prevents this accuracy loss, and find that it reduces the power-efficiency gain from 43% to 25%.

cs.LG↗

arXiv2019

A Novel FPGA-Based High Throughput Accelerator For Binary Search Trees

This paper presents a deeply pipelined and massively parallel Binary Search Tree (BST) accelerator for Field Programmable Gate Arrays (FPGAs). Our design relies on the extremely parallel on-chip memory, or Block RAMs (BRAMs) architecture of FPGAs. To achieve significant throughput for the search operation on BST, we present several novel mechanisms including tree duplication as well as horizontal, duplicated, and hybrid (horizontal-vertical) tree partitioning. Also, we present efficient techniques to decrease the stalling rates that can occur during the parallel tree search. By combining these techniques and implementations on Xilinx Virtex-7 VC709 platform, we achieve up to 8X throughput improvement gain in comparison to the baseline implementation, i.e., a fully-pipelined FPGA-based accelerator.

cs.DC↗

arXiv2018

SoftMC: Practical DRAM Characterization Using an FPGA-Based Infrastructure

This paper summarizes the SoftMC DRAM characterization infrastructure, which was published in HPCA 2017, and examines the work's significance and future potential. SoftMC (Soft Memory Controller) is the first publicly-available DRAM testing infrastructure that can flexibly and efficiently test DRAM chips in a manner accessible to both software and hardware developers. SoftMC is an FPGA-based testing platform that can control and test memory modules designed for the commonly-used DDR (Double Data Rate) interface. SoftMC has two key properties: (i) it provides flexibility to thoroughly control memory behavior or to implement a wide range of mechanisms using DDR commands; and (ii) it is easy to use as it provides a simple and intuitive high-level programming interface for users, completely hiding the low-level details of the FPGA. We demonstrate the capability, flexibility, and programming ease of SoftMC with two example use cases. First, we implement a test that characterizes the retention time of DRAM cells. Second, we show that the expected latency reduction of two recently-proposed mechanisms, which rely on accessing recently-refreshed or recently-accessed DRAM cells faster than other DRAM cells, is not observable in existing DRAM chips. Various versions of the SoftMC platform have enabled many of our other DRAM characterization studies. We discuss several other use cases of SoftMC, including the ability to characterize emerging non-volatile memory modules that obey the DDR standard. We hope that our open-source release of SoftMC fills a gap in the space of publicly-available experimental memory testing infrastructures and inspires new studies, ideas, and methodologies in memory system design.

cs.AR↗

arXiv2018

Exploiting Row-Level Temporal Locality in DRAM to Reduce the Memory Access Latency

This paper summarizes the idea of ChargeCache, which was published in HPCA 2016 [51], and examines the work's significance and future potential. DRAM latency continues to be a critical bottleneck for system performance. In this work, we develop a low-cost mechanism, called ChargeCache, that enables faster access to recently-accessed rows in DRAM, with no modifications to DRAM chips. Our mechanism is based on the key observation that a recently-accessed row has more charge and thus the following access to the same row can be performed faster. To exploit this observation, we propose to track the addresses of recently-accessed rows in a table in the memory controller. If a later DRAM request hits in that table, the memory controller uses lower timing parameters, leading to reduced DRAM latency. Row addresses are removed from the table after a specified duration to ensure rows that have leaked too much charge are not accessed with lower latency. We evaluate ChargeCache on a wide variety of workloads and show that it provides significant performance and energy benefits for both single-core and multi-core systems.

cs.AR↗

arXiv2017

GRIM-Filter: Fast Seed Location Filtering in DNA Read Mapping Using Processing-in-Memory Technologies

Motivation: Seed location filtering is critical in DNA read mapping, a process where billions of DNA fragments (reads) sampled from a donor are mapped onto a reference genome to identify genomic variants of the donor. State-of-the-art read mappers 1) quickly generate possible mapping locations for seeds (i.e., smaller segments) within each read, 2) extract reference sequences at each of the mapping locations, and 3) check similarity between each read and its associated reference sequences with a computationally-expensive algorithm (i.e., sequence alignment) to determine the origin of the read. A seed location filter comes into play before alignment, discarding seed locations that alignment would deem a poor match. The ideal seed location filter would discard all poor match locations prior to alignment such that there is no wasted computation on unnecessary alignments. Results: We propose a novel seed location filtering algorithm, GRIM-Filter, optimized to exploit 3D-stacked memory systems that integrate computation within a logic layer stacked under memory layers, to perform processing-in-memory (PIM). GRIM-Filter quickly filters seed locations by 1) introducing a new representation of coarse-grained segments of the reference genome, and 2) using massively-parallel in-memory operations to identify read presence within each coarse-grained segment. Our evaluations show that for a sequence alignment error tolerance of 0.05, GRIM-Filter 1) reduces the false negative rate of filtering by 5.59x--6.41x, and 2) provides an end-to-end read mapper speedup of 1.81x--3.65x, compared to a state-of-the-art read mapper employing the best previous seed location filtering algorithm. Availability: The code is available online at: https://github.com/CMU-SAFARI/GRIM

q-bio.GN↗

arXiv2017

GRIM-filter: fast seed filtering in read mapping using emerging memory technologies

Motivation: Seed filtering is critical in DNA read mapping, a process where billions of DNA fragments (reads) sampled from a donor are mapped onto a reference genome to identify genomic variants of the donor. Read mappers 1) quickly generate possible mapping locations (i.e., seeds) for each read, 2) extract reference sequences at each of the mapping locations, and then 3) check similarity between each read and its associated reference sequences with a computationally expensive dynamic programming algorithm (alignment) to determine the origin of the read. Location filters come into play before alignment, discarding seed locations that alignment would have deemed a poor match. The ideal location filter would discard all poor matching locations prior to alignment such that there is no wasted computation on poor alignments. Results: We propose a novel filtering algorithm, GRIM-Filter, optimized to exploit emerging 3D-stacked memory systems that integrate computation within a stacked logic layer, enabling processing-in-memory (PIM). GRIM-Filter quickly filters locations by 1) introducing a new representation of coarse-grained segments of the reference genome and 2) using massively-parallel in-memory operations to identify read presence within each coarse-grained segment. Our evaluations show that for 5% error acceptance rates, GRIM-Filter eliminates 5.59x-6.41x more false negatives and exhibits end-to-end speedups of 1.81x-3.65x compared to mappers employing the best previous filtering algorithm.

q-bio.GN↗