Searcharxiv⌕ Search

arXiv subjects

Oleg A. Mukhanov

Publications and source records attributed to Oleg A. Mukhanov.

13 recordsLinked to original sources

Magnetic exchange coupled nonreciprocal devices for cryogenic memory

As computing power demands continue to grow, superconducting electronics present an opportunity to reduce power consumption by increasing the energy efficiency of digital logic and memory. A key milestone for scaling this technology is the development of efficient superconducting memories. Such devices should be nonvolatile, scalable to high integration density and memory capacity, enable fast and low-power reading and writing operations, and be compatible with the digital logic. We present a versatile device platform to develop such nonvolatile memory devices consisting of an exchange-coupled ultra-thin superconductor encapsulated between two ferromagnetic insulators (FIs). The superconducting exchange coupling, which is tuneable by the relative alignment between the FI magnetizations, enables the switching of superconductivity on and off. We exploit this mechanism to create a superconducting nonvolatile memory where single-cell writing is realized using heat-assisted magnetic recording, and explain how it can become a contender for state-of-the-art superconducting memories. Furthermore, below their critical temperatures, the memory elements show a marked nonreciprocity, with zero magnetic field superconducting diode efficiencies exceeding $\pm$60%, showing the versatility of the proposed devices for superconducting computing.

cond-mat.supr-con↗

Single Flux Quantum Circuit Operation at Millikelvin Temperatures

As quantum computing processors increase in size, there is growing interest in developing cryogenic electronics to overcome significant challenges to system scaling. Single flux-quantum (SFQ) circuits offer a promising alternative to remote, bulky, and power-hungry room temperature electronics. To meet the need for digital qubit control, readout, and co-processing, SFQ circuits must be adapted to operate at millikelvin temperatures near quantum processors. SEEQC's SFQuClass digital quantum management approach proximally places energy-efficient SFQ (ERSFQ) circuits and qubits in a multi-chip module. This enables extremely low power dissipation, compatible with a typical dilution cryostat's limited cooling power, while maintaining high processing speed and low error rates. We report on systematic testing from 4 K to 10 mK of a comprehensive set of ERSFQ cells, as well as more complex circuits such as programmable counters and demultiplexers used in digital qubit control. We compare the operating margins and error rates of these circuits and find that, at millikelvin, bias margins decrease and the center of the margins (i.e., the optimal bias current value) increases by ~15%, compared to 4.2 K. The margins can be restored by thermal annealing by reducing Josephson junction (JJ) critical current Ic. To provide guidance for how circuit parameters vary from 4.2 K to millikelvin, relevant analog process control monitors (PCMs) were tested in the temperature range of interest. The measured JJ critical current (of the PCM JJ arrays) increases by ~15% when decreasing temperature from 4.2 K to millikelvin, in good agreement with both theory and the empirically measured change in the center of bias margins for the tested digital circuits.

quant-ph↗

Quasiparticle Dynamics in NbN Superconducting Microwave Resonators at Single Photon Regime

Exchanging energy below the superconducting gap introduces quasiparticle energy distributions in superconducting quantum circuits, which will be responsible for their decoherence. This study examines the impact of quasiparticle energy on the performance of NbN superconducting microwave coplanar waveguide resonators on silicon chips. We measured the resonance frequency and internal quality factor in response to temperature sweeps to evaluate the effect of quasiparticle dynamics. Moreover, by calculating the complex conductivity of the NbN film, we identified the contribution of quasiparticle density to the experimental results.

quant-ph↗

Highly Efficient Superconducting Diodes and Rectifiers for Quantum Circuitry

Superconducting electronics is essential for energy-efficient quantum and classical high-end computing applications. Towards this goal, non-reciprocal superconducting circuit elements, such as superconducting diodes (SDs) can fulfill many critical needs. SDs have been the subject of multiple studies, but integrating several SDs in a superconducting circuit remains a challenge. Here we implement the first SD bridge with multiple SDs exhibiting reproducible characteristics operating at temperatures of a few Kelvin. We demonstrate its functionality as a full wave rectifier using elemental superconductors and insulating ferromagnets, with efficiency up to 43%, and ac to dc signal conversion capabilities at frequencies up to 40 kHz. Our results show a pathway with a highly scalable thin film platform for nonreciprocal superconducting circuits. They could significantly reduce energy consumption as well as decohering thermal and electromagnetic noise in quantum computing.

cond-mat.supr-con↗

Discriminating the Phase of a Coherent Tone with a Flux-Switchable Superconducting Circuit

We propose a new phase detection technique based on a flux-switchable superconducting circuit, the Josephson digital phase detector (JDPD), which is capable of discriminating between two phase values of a coherent input tone. When properly excited by an external flux, the JDPD is able to switch from a single-minimum to a double-minima potential and, consequently, relax in one of the two stable configurations depending on the phase sign of the input tone. The result of this operation is digitally encoded in the occupation probability of a phase particle in either of the two JDPD wells. In this work, we demonstrate the working principle of the JDPD up to a frequency of 400 MHz with a remarkable agreement with theoretical expectations. As a future scenario, we discuss the implementation of this technique to superconducting qubit readout. We also examine the JDPD compatibility with the single-flux-quantum architecture, employed to fast-drive and measure the device state.

quant-ph↗

Characterizing Niobium Nitride Superconducting Microwave Coplanar Waveguide Resonator Array for Circuit Quantum Electrodynamics in Extreme Conditions

The high critical magnetic field and relatively high critical temperature of niobium nitride (NbN) make it a promising material candidate for applications in superconducting quantum technology. However, NbN-based devices and circuits are sensitive to decoherence sources such as two-level system (TLS) defects. Here, we numerically and experimentally investigate NbN superconducting microwave coplanar waveguide resonator arrays, with a 100 nm thickness, capacitively coupled to a common coplanar waveguide on a silicon chip. We observe that the resonators' internal quality factor (Qi) decreases from Qi ~ 1.07*10^6 in a high power regime (< nph > = 27000) to Qi ~ 1.36 *10^5 in single photon regime at temperature T = 100 mK. Data from this study is consistent with the TLS theory, which describes the TLS interactions in resonator substrates and interfaces. Moreover, we study the temperature dependence internal quality factor and frequency tuning of the coplanar waveguide resonators to characterise the quasiparticle density of NbN. We observe that the increase in kinetic inductance at higher temperatures is the main reason for the frequency shift. Finally, we measure the resonators' resonance frequency and internal quality factor at single photon regime in response to in-plane magnetic fields B||. We verify that Qi stays well above 10^4 up to B|| = 240 mT in the photon number < nph > = 1.8 at T = 100 mK. Our results may pave the way for realising robust microwave superconducting circuits for circuit quantum electrodynamics (cQED) at high magnetic fields necessary for fault-tolerant quantum computing, and ultrasensitive quantum sensing.

quant-ph↗

Modeling the computer memory based on the ferromagnet/superconductor multilayers

A model of superconducting computer memory exploiting the orthogonal spin transfer (OST) in the pseudospin valve (PS) that is controlled by the three-terminal Josephson superconducting-ferromagnetic transistor (SFT) is developed. The building blocks of the memory are hybrid PS and SFT structures. The memory model is formulated in terms of the equation-defined PS and SFT devices integrated into the PS/SFT memory cell (MC) circuit. Logical units "0" and "1" are associated with the two PS states respectively characterized by two different values of resistance. Elementary logical operations comprising the read/write processes occur when a word pulse applied to the SFT's injector coincides with the respective bit pulse acting on MC. Physically, a word pulse triggers SFT to a resistive state, causing the PS switching between the logical "0" and "1" states. Thus, the whole switching dynamics of MC depends on the non-equilibrium and nonstationary properties of PS and SFT. Modeling the single MC as well as the larger MC-based circuits comprising respectively twelve and thirty elements suggest that such the memory cells can undergo ultrafast switching (sub-ns) and low energy consumption per operation (sub-100 fJ). The suggested model allows studying the influence of noises, punch-through effect, crosstalk, parasitic, etc. The obtained results suggest that the hybrid PS/SFT structures are well-suited to superconducting computing circuits as they are built of magnetic and non-magnetic transition metals and therefore have low impedances (1-30 Ohm).

cond-mat.supr-con↗

Symmetric Traveling Wave Parametric Amplifier

We developed and experimentally tested a Symmetric Traveling Wave Parametric Amplifier (STWPA) based on Three-Wave Mixing, using the new concept of a Symmetric rf- SQUID. This allows to fully control the second and third order nonlinearities of the STWPA by applying external currents. In this way, the optimal bias point can be reached, taking into account both phase mismatch and pump depletion minimization. The structure was tested at 4.2K, showing a 4GHz bandwidth and a maximum estimated gain of 17dB. STWPA showed also great flexibility, allowing up-down conversion mixer operations and rf-controlled switch.

physics.app-ph↗

Properties of ferromagnetic Josephson junctions for memory applications

In this work we give a characterization of the RF effect of memory switching on Nb-Al/AlOx-(Nb)-Pd$_{0.99}$Fe$_{0.01}$-Nb Josephson junctions as a function of magnetic field pulse amplitude and duration, alongside with an electrodynamical characterization of such junctions, in comparison with standard Nb-Al/AlOx-Nb tunnel junctions. The use of microwaves to tune the switching parameters of magnetic Josephson junctions is a step in the development of novel addressing schemes aimed at improving the performances of superconducting memories.

cond-mat.supr-con↗

Electrical Characteristics of Superconducting-Ferromagnetic Transistors

We report experimental results on characteristics of SFIFS junctions and multi-terminal SFIFSIS devices (where S, I, and F denote a superconductor (Nb), an insulator (AlOx), and a ferromagnetic material (Ni), respectively). The SFIFS junctions serve as injectors in the SFIFSIS devices which have transistor-like properties; for this reason we call them Superconducting-Ferromagnetic Transistors (SFTs). We have found the F (Ni) thickness at which the SFIFS current-voltage characteristic (CVC) becomes linear. Furthermore, we investigated the DC and AC characteristics of SFTs of two types: ordinary devices with a single acceptor (SIS) junction, and devices with a double acceptor. In the first case, we focused on studying the influence of the injection current through the SFIFS junction on the maximum Josephson current of the SIS acceptor. For devices of the second type, we studied voltage amplification properties when the operating point was chosen in the sub-gap region of the acceptor CVC. By applying an AC signal (in the kHz range) while biasing the injector (SFIFS) junction with a constant DC current, we observed a voltage gain above 25 on the double acceptor. In the reverse transmission experiment, we applied DC current and an AC modulation to the acceptor junction and, within the accuracy of the experiment, observed no response on the injector junction, which implies an excellent input-output isolation in our SFIFSIS devices. The experiments indicate that, after optimization of the device parameters, they can be used as input/output isolators and amplifiers for memory, digital, and RF applications.

cond-mat.supr-con↗

Magnetic Josephson Junctions with Superconducting Interlayer for Cryogenic Memory

We investigate Magnetic Josephson Junction (MJJ) - a superconducting device with ferromagnetic barrier for a scalable high-density cryogenic memory compatible with energy-efficient single flux quantum (SFQ) circuits. The superconductor-insulator-superconductor-ferromagnet-superconductor (SIS'FS) MJJs are analyzed both experimentally and theoretically. We found that the properties of SIS'FS junctions fall into two distinct classes based on the thickness of S' layer. We fabricate Nb-Al/AlOx-Nb-PdFe-Nb SIS'FS MJJs using a co-processing approach with a combination of HYPRES and ISSP fabrication processes. The resultant SIS'FS structure with thin superconducting S'-layer is substantially affected by the ferromagnetic layer as a whole. We fabricate these type of junctions to reach the device compatibility with conventional SIS junctions used for superconducting SFQ electronics to ensure a seamless integration of MJJ-based circuits and SIS JJ-based ultra-fast digital SFQ circuits. We report experimental results for MJJs, demonstrating their applicability for superconducting memory and digital circuits. These MJJs exhibit IcRn product only ~30% lower than that of conventional SIS junctions co-produced in the same fabrication. Analytical calculations for these SIS'FS structures are in a good agreement with the experiment. We discuss application of MJJ devices for memory and programmable logic circuits.

cond-mat.supr-con↗

Active Electrically Small Antenna Based on Superconducting Quantum Array

We introduce Superconductive Quantum Arrays (SQAs) and propose to use these structures as active Electrically Small Antennas (ESA). Several prototypes of the active ESA were fabricated using Nb process with critical current density 4.5 kA/cm2 and experimentally evaluated. The magnetic field to voltage transfer function linearity up to 70 dB was measured, and transfer factor dV/dB up to 6.5 mV/μT was observed for the ESA prototype containing 560 cells.

cond-mat.supr-con↗

Implementation of Energy Efficient Single Flux Quantum (eSFQ) Digital Circuits with sub-aJ/bit Operation

We report the first experimental demonstration of recently proposed energy-efficient single flux quantum logic, eSFQ. This logic can represent the next generation of RSFQ logic eliminating dominant static power dissipation associated with a dc bias current distribution and providing over two orders of magnitude efficiency improvement over conventional RSFQ logic. We further demonstrate that the introduction of passive phase shifters allows the reduction of dynamic power dissipation by about 20%, reaching ~0.8 aJ per bit operation. Two types of demonstration eSFQ circuits, shift registers and demultiplexers (deserializers), were implemented using the standard HYPRES 4.5 kA/cm2 fabrication process. In this paper, we present eSFQ circuit design and demonstrate the viability and performance metrics of eSFQ circuits through simulations and experimental testing.

cond-mat.supr-con↗