arXiv subjects

Oleg Brandt

Publications and source records attributed to Oleg Brandt.

At least 19 recordsLinked to original sources

arXiv2026

Calibration and Performance of proANUBIS: A proof-of-concept detector for the ANUBIS experiment

Long-lived particles with lifetimes $\tau>10$~ps are predicted by many extensions of the Standard Model with viable dark matter candidates. The ANUBIS experiment proposes to extend the experimental sensitivity to long-lived particles by instrumenting the ceiling of the ATLAS cavern with Resistive Plate Chamber detectors in order to reconstruct vertices from long-lived particle decays in the air-filled volume above the ATLAS detector. The proANUBIS detector has been installed in the ATLAS cavern to validate the detector technology planned for ANUBIS and to take in-situ measurements of muon and hadron fluxes inside the ATLAS cavern using $pp$ collision data from the LHC. In this paper, the data collected, reconstruction techniques used, and performance of the \proanubis detector are discussed. The detection efficiency and timing resolution are found to be consistent with expectations and to meet the performance requirements of ANUBIS.

hep-ex↗

arXiv2026

Projected sensitivity of the ANUBIS detector to heavy neutral leptons

Long-Lived Particles (LLPs) are a common feature in various extensions to the Standard Model (SM) that seek to address known limitations. The ANUBIS detector has been proposed to extend the sensitivity of the ATLAS experiment at the LHC to LLPs by instrumenting the ceiling of the ATLAS detector cavern. This article presents the projected sensitivity of ANUBIS to Heavy Neutral Leptons (HNLs). For a minimal Majorana HNL model that only couples to a single flavour of lepton ($e$ or $\mu$) ANUBIS reaches a maximum sensitivity of $|V_{1e}|^2=1.8\times10^{-8}$ and $|V_{1\mu}|^2=1.9\times10^{-8}$ for a HNL mass of $m_{N_1}=6.4$ GeV and 6.3 GeV respectively. This provides complementary coverage to other proposed LLP experiments in the HNL parameter-space, with potential for significant improvement during ANUBIS data-taking through advances in analysis strategies. The results are obtained with SET-ANUBIS, a flexible framework to evaluate the sensitivity of ANUBIS to a variety of LLP models.

hep-ex↗

arXiv2025

Commissioning of proANUBIS: A proof-of-concept detector for the ANUBIS experiment

Long-lived particles (LLPs), predicted by various extensions of the Standard Model (SM), have become a key focus of the contemporary search programme for physics beyond the SM. To enhance LLP discovery potential at the LHC, the ANUBIS experiment has been proposed to instrument the ceiling of the ATLAS experiment's underground cavern with dedicated tracking detectors. This report summarises recent progress towards realising ANUBIS. Specifically, a key milestone has been achieved with the installation and commissioning of proANUBIS, a prototype that serves as a proof-of-concept for ANUBIS. We describe the proANUBIS setup, including its remotely-operated data acquisition system and automatic signal processing chain. The proANUBIS demonstrator is used to evaluate the detector performance under realistic conditions in the UX1 ATLAS experimental cavern, including readout synchronisation with the ATLAS experiment. Furthermore, proANUBIS allows for the direct measurement of relevant background processes in a representative location within the ATLAS cavern, providing input for the simulation of such processes for the future ANUBIS detector. The paper concludes with an update on the current status of the ANUBIS project and its roadmap toward a full-scale implementation in the ATLAS cavern.

hep-ex↗

arXiv2025

ANUBIS: Projected Sensitivities and Initial Results from the proANUBIS demonstrator with Run 3 LHC data

Despite the success of the Standard Model (SM) there remains behaviour it cannot describe, in particular the presence of non-interacting Dark Matter. Many models that describe dark matter can generically introduce exotic Long-Lived Particles (LLPs). The proposed ANUBIS experiment is designed to search for these LLPs within the ATLAS detector cavern, located approximately 20-30 m from the Interaction Point (IP). A prototype detector, proANUBIS, has taken data within the ATLAS detector cavern since 2024, corresponding to 104 $fb^{-1}$ of pp data. We report on the potential sensitivity of ANUBIS to a selection of LLP models, i.e. Higgs Portal and Heavy Neutral Leptons, as well as future planned studies. Additionally, we will show the first results of the proANUBIS demonstrator, and how it will be used to study the expected backgrounds for the ANUBIS detector.

hep-ex↗

arXiv2025

Construction of proANUBIS: A proof-of-concept detector for the ANUBIS experiment

The ANUBIS experiment aims to search for long-lived particles at the Large Hadron Collider (LHC) at CERN. To assess the feasibility of the project, a prototype detector, proANUBIS, was designed, constructed, and prepared for installation in the UX1 ATLAS experimental cavern at the LHC. The primary physics goals of proANUBIS are to determine the technical limitations of the detector technology and to explore the ANUBIS detector concept through in-situ measurements of muon and hadron fluxes inside the ATLAS cavern, which can be used to refine Monte Carlo simulations of such fluxes further. This report describes the design and construction of the proANUBIS experimental setup using Resistive Plate Chambers (RPCs), highlighting the possible future use case of the technology for ANUBIS. Details on the RPC technology, construction processes, quality control measures, and performance studies are discussed. Furthermore, the RPC front-end on-detector electronics and data acquisition components of proANUBIS are presented.

hep-ex↗

arXiv2025

ANUBIS: Proposal to search for long-lived neutral particles in CERN service shafts

Long-lived particles are predicted by many extensions of the Standard Model and have been gaining interest in recent years. In this Letter we present a competitive proposal that substantially extends the sensitivity in lifetime by instrumenting the existing service shafts above the ATLAS or CMS experiments with tracking stations. For scenarios with electrically neutral long-lived particles with $m \gtrsim 1$~GeV, the lifetime reach is increased by 2-3 orders of magnitude compared to currently operating and approved future experiments at the LHC. A detector design proposal is outlined along with projected costs.

physics.ins-det↗

arXiv2025

Performance studies of thin gas gap Resistive Plate Chamber prototypes with low Global Warming Potential gases for the ANUBIS experiment

Resistive Plate Chambers (RPCs) have traditionally operated with high Global Warming Potential (GWP) gas mixtures, adding to the environmental footprint of large-scale physics experiments. In response, efforts are underway to explore environmentally friendly alternatives as a long-term solution and low-GWP as a feasible short- to medium-term replacement for standard RPC gases. This study tests a few mixtures in 50 cm $\times$ 50 cm, 1 mm single-gap High-Pressure Laminate (HPL) RPC prototypes, as part of ongoing efforts for the ANUBIS experiment, which will operate with a 9.8 m$^{3}$ active gas volume. Measurements of performance metrics, including current and efficiency, are conducted with both standard and modified mixtures to assess their viability in sustaining detector performance. The results are also relevant for large RPC systems in other experiments at the LHC, such as ATLAS and CMS, as well as in applications beyond the LHC, supporting a shift toward environmentally sustainable gas mixtures in particle physics detectors.

physics.ins-det↗

arXiv2025

2026 ESPPU input from the ANUBIS Collaboration

It is imperative for us as a particle physics community to fully exploit the physics potential of the High-Luminosity LHC. This calls for us not to leave any stone unturned in the search for Beyond the Standard Model (BSM) physics. Many BSM models that address fundamental questions of physics like the particulate nature of dark matter, the matter-antimatter asymmetry in the Universe, small but non-zero neutrino masses etc, predict Long-Lived Particles (LLPs) with macroscopic lifetimes of $τ>10^{-10}$ s. The challenge in searching for BSM models with LLP signatures at the HL-LHC is that it requires the complementary interplay of general purpose detectors like ATLAS, CMS, and LHCb; dedicated detectors situated close to the beamline including the proposed Forward Physics Facility (FPF); and dedicated detectors covering a large decay volume at a reasonable solid angle transverse to the beamline, i.e., a Transverse Physics Facility (TPF). Hence, it is of vital importance to realise a TPF in order to expand dramatically the physics coverage within long-lived particle searches to harvest the physics at the HL-LHC fully. A TPF may be composed of several experiments based at the HL-LHC. In this document, we propose that the community realise the ANUBIS experiment as part of a TPF.

hep-ex↗

arXiv2022

Collider Searches for Dark Matter through the Higgs Lens

Despite the fact that dark matter constitutes one of the cornerstones of the standard cosmological paradigm, its existence has so far only been inferred from astronomical observations and its microscopic nature remains elusive. Theoretical arguments suggest that dark matter might be connected to the symmetry-breaking mechanism of the electroweak interactions or of other symmetries extending the Standard Model of particle physics. The resulting Higgs bosons, including the $125 \, {\rm GeV}$ spin-0 particle discovered recently at the Large Hadron Collider therefore represent a unique tool to search for dark matter candidates at collider experiments. This article reviews some of the relevant theoretical models as well as the results from the searches for dark matter in signatures that involve a Higgs-like particle at the Large Hadron Collider.

hep-ph↗

arXiv2022

Report of the Topical Group on Physics Beyond the Standard Model at Energy Frontier for Snowmass 2021

This is the Snowmass2021 Energy Frontier (EF) Beyond the Standard Model (BSM) report. It combines the EF topical group reports of EF08 (Model-specific explorations), EF09 (More general explorations), and EF10 (Dark Matter at Colliders). The report includes a general introduction to BSM motivations and the comparative prospects for proposed future experiments for a broad range of potential BSM models and signatures, including compositeness, SUSY, leptoquarks, more general new bosons and fermions, long-lived particles, dark matter, charged-lepton flavor violation, and anomaly detection.

hep-ph↗

arXiv2022

Displaying dark matter constraints from colliders with varying simplified model parameters

The search for dark matter is one of the main science drivers of the particle and astroparticle physics communities. Determining the nature of dark matter will require a broad approach, with a range of experiments pursuing different experimental hypotheses. Within this search program, collider experiments provide insights on dark matter which are complementary to direct/indirect detection experiments and to astrophysical evidence. To compare results from a wide variety of experiments, a common theoretical framework is required. The ATLAS and CMS experiments have adopted a set of simplified models which introduce two new particles, a dark matter particle and a mediator, and whose interaction strengths are set by the couplings of the mediator. So far, the presentation of LHC and future hadron collider results has focused on four benchmark scenarios with specific coupling values within these simplified models. In this work, we describe ways to extend those four benchmark scenarios to arbitrary couplings, and release the corresponding code for use in further studies. This will allow for more straightforward comparison of collider searches to accelerator experiments that are sensitive to smaller couplings, such as those for the US Community Study on the Future of Particle Physics (Snowmass 2021), and will give a more complete picture of the coupling dependence of dark matter collider searches when compared to direct and indirect detection searches. By using semi-analytical methods to rescale collider limits, we drastically reduce the computing resources needed relative to traditional approaches based on the generation of additional simulated signal samples.

hep-ph↗

arXiv2018

LHC Dark Matter Working Group: Next-generation spin-0 dark matter models

Dark matter (DM) simplified models are by now commonly used by the ATLAS and CMS Collaborations to interpret searches for missing transverse energy ($E_T^\mathrm{miss}$). The coherent use of these models sharpened the LHC DM search program, especially in the presentation of its results and their comparison to DM direct-detection (DD) and indirect-detection (ID) experiments. However, the community has been aware of the limitations of the DM simplified models, in particular the lack of theoretical consistency of some of them and their restricted phenomenology leading to the relevance of only a small subset of $E_T^\mathrm{miss}$ signatures. This document from the LHC Dark Matter Working Group identifies an example of a next-generation DM model, called $\textrm{2HDM+a}$, that provides the simplest theoretically consistent extension of the DM pseudoscalar simplified model. A comprehensive study of the phenomenology of the $\textrm{2HDM+a}$ model is presented, including a discussion of the rich and intricate pattern of mono-$X$ signatures and the relevance of other DM as well as non-DM experiments. Based on our discussions, a set of recommended scans are proposed to explore the parameter space of the $\textrm{2HDM+a}$ model through LHC searches. The exclusion limits obtained from the proposed scans can be consistently compared to the constraints on the $\textrm{2HDM+a}$ model that derive from DD, ID and the DM relic density.

hep-ex↗

arXiv2017

Direct measurement of the top quark mass in $p\bar p$ collisions at D0

The mass of the top quark is a fundamental parameter of the Standard Model and has to be determined experimentally. In these proceedings, I review recent direct measurements of the top quark mass in $p\bar p$ collisions at $\sqrt s=1.96$ TeV recorded by the D0 experiment at the Tevatron. The measurements are performed in final states containing one and two charged leptons. I will present the legacy combination of all top quark mass measurements from the D0 experiment and their combination with results from the CDF experiment. A relative precision of down to 0.3\% is attained.

hep-ex↗

arXiv2017

Measurements of the top quark mass from the LHC and the Tevatron

The mass of the top quark is a fundamental parameter of the standard model and has to be determined experimentally. In these proceedings, I review recent measurements of the top quark mass in $pp$ collisions at $\sqrt s=7,~8,$ and 13 TeV recorded by the ATLAS and CMS detectors at the LHC, and in $p\bar p$ collisions at $\sqrt s=1.96$ TeV recorded by the CDF and D0 experiments at the Tevatron. The measurements are performed in final states containing two, one, and no charged leptons. A relative precision of down to 0.3% is attained. In addition, recent measurements aiming to determine the top quark mass in the well-defined pole scheme using both inclusive $t\bar t$ and $t\bar t+1~{\rm jet}$ production are presented.

hep-ex↗

arXiv2015

Measurements of the top quark mass with the ATLAS detector

The top quark mass is one of the fundamental parameters of the Standard Model. In these proceedings, recent measurements of the top quark mass in $pp$ collisions at centre-of-mass energies of $\sqrt s=7$ and 8~TeV data in Run I of the Large Hadron Collider using the ATLAS detector are reviewed. A measurement using lepton+jets events is presented, where a multidimensional template fit is used to constrain the uncertainties on the energy measurements of jets. The measurement is combined with a measurement using dilepton events. In addition, novel measurements aiming to measure the mass in a well-defined scheme are presented. These measurements use precision theoretical QCD calculations for both inclusive $t\bar t$ production and $t\bar t$ production with an additional jet to extract the top quark mass in the pole mass scheme.

hep-ex↗

arXiv2015

Recent top quark production results from the Tevatron

In this article, I review recent measurements of the production of the top quark in $p\bar p$ collisions at a centre-of-mass energy of $\sqrt s=1.96$~TeV in Run II of the Fermilab Tevatron Collider, recorded by the CDF and D0 Collaborations. I will present the Tevatron combination of measurements of the $t\bar t$ production cross section and its differential measurement, the first evidence for and observation of the production of single top quarks in the $s$-channel, as well the final Tevatron combination of the production of single top quarks the $s$- and $t$-channels. Furthermore, I will review the measurements of the forward-backward asymmetry in $t\bar t$ events, which can be experimentally uniquely accessed in the $CP$-invariant $p\bar p$ initial state at the Tevatron, and conclude with the measurements of this asymmetry in the $b\bar b$ system.

hep-ex↗

arXiv2015

Recent results in the top quark sector from the D0 experiment

In these proceedings, I review recent measurements in the top quark sector in $p\bar p$ collisions at a centre-of-mass energy of $\sqrt s=1.96$ TeV in Run II of the Fermilab Tevatron Collider using the D0 detector. I will present the differential measurement of the $t\bar t$ production cross section and the Tevatron combination of inclusive $t\bar t$ cross section measurements; the first evidence of the production of single top quarks in the $s$-channel by D0 and the observation in combination with CDF. Furthermore, I will review the measurements of the forward-backward asymmetry in $t\bar t$ events, and conclude with the world's most precise single measurement of the top quark mass, which is a fundamental parameter of the standard model, and present the Tevatron combination, which is the world's most precise determination of the top quark mass, with a relative precision of 0.37\%.

hep-ex↗

arXiv2014

Acceleration of matrix element computations for precision measurements

The matrix element technique provides a superior statistical sensitivity for precision measurements of important parameters at hadron colliders, such as the mass of the top quark or the cross section for the production of Higgs bosons. The main practical limitation of the technique is its high computational demand. Using the concrete example of the top quark mass, we present two approaches to reduce the computation time of the technique by a factor of 90. First, we utilize low-discrepancy sequences for numerical Monte Carlo integration in conjunction with a dedicated estimator of numerical uncertainty, a novelty in the context of the matrix element technique. Second, we utilize a new approach that factorizes the overall jet energy scale from the matrix element computation, a novelty in the context of top quark mass measurements. The utilization of low-discrepancy sequences is of particular general interest, as it is universally applicable to Monte Carlo integration, and independent of the computing environment.

hep-ex↗