arXiv subjects

Oleg Shtempluck

Publications and source records attributed to Oleg Shtempluck.

At least 19 recordsLinked to original sources

arXiv2023

Frequency mixing spectroscopy of spins in diamond

Frequency mixing processes in spin systems have a variety of applications in meteorology and in quantum data processing. Spin spectroscopy based on frequency mixing offers some advantages, including the ability to eliminate crosstalk between driving and detection. We experimentally explore nonlinear frequency mixing processes with negatively charged nitrogen-vacancy defects in diamond at low temperatures, and near level anti crossing. The experimental setup allows simultaneously applying magnetic driving in the longitudinal and transverse directions. Magnetic resonance detection is demonstrated using both Landau Zener Stückelberg interferometry and two-tone driving spectroscopy. The experimental results are compared with predictions of a theoretical analysis based on the rotating wave approximation.

quant-ph↗

arXiv2023

High temperature spectroscopy of nitrogen vacancy centers in diamond

We study spectroscopy of negatively charged nitrogen-vacancy center in diamond at high temperatures under high vacuum conditions. Spin resonances are studied using optical detection of magnetic resonance (ODMR), and optical spectroscopy is employed to study radiative transitions. Upon increasing the temperature the intensity of radiative decay in visible and infra-red decreased. In addition, the ODMR resonance frequencies were decreased, and the phonon line emission shifted to higher wavelengths. Fitting the measured intensity of photo-luminescence with the theoretical predictions of the Mott-Seitz model yields the value of $0.24 \operatorname{eV}$ for the energy barrier associated with nonradiative decay.

quant-ph↗

arXiv2021

Optical interface for a hybrid magnon-photon resonator

We study optical detection of magnetic resonance of a ferrimagnetic sphere resonator, which is strongly coupled to a microwave loop gap resonator. Optical fibers are employed for coupling the sphere resonator with light in the telecom band. We find that magnetic resonance can be optically detected in the region of anti-crossing between the loop gap and the ferrimagnetic resonances. By measuring the response time of the optical detection we rule out the possibility that microwave induced heating is responsible for the optical detectability.

physics.app-ph↗

arXiv2021

Thermal instability in a ferrimagnetic resonator strongly coupled to a loop-gap microwave cavity

We study nonlinear response of a ferrimagnetic sphere resonator (FSR) strongly coupled to a microwave loop gap resonator (LGR). The measured response in the regime of weak nonlinearity allows the extraction of the FSR Kerr coefficient and its cubic damping rate. We find that there is a certain range of driving parameters in which the system exhibits instability. In that range, self-sustained modulation of the reflected power off the system is generated. The instability is attributed to absorption-induced heating of the FSR above its Curie temperature.

cond-mat.str-el↗

arXiv2021

Optically detected flip-flops between different spin ensembles in diamond

We employ the technique of optical detection of magnetic resonance to study dipolar interaction in diamond between nitrogen-vacancy color centers of different crystallographic orientations and substitutional nitrogen defects. We demonstrate optical measurements of resonant spin flips-flips (second Larmor line), and flip-flops between different spin ensembles in diamond. In addition, the strain coupling between the nitrogen-vacancy color centers and bulk acoustic modes is studied using optical detection. Our findings may help optimizing cross polarization protocols, which, in turn, may allow improving the sensitivity of diamond-based detectors.

quant-ph↗

arXiv2020

Frequency mixing in a ferrimagnetic sphere resonator

Frequency mixing in ferrimagnetic resonators based on yttrium and calcium vanadium iron garnets (YIG and CVBIG) is employed for studying their nonlinear interactions. The ferrimagnetic Kittel mode is driven by applying a pump tone at a frequency close to resonance. We explore two nonlinear frequency mixing configurations. In the first one, mixing between a transverse pump tone and an added longitudinal weak signal is explored, and the experimental results are compared with the predictions of the Landau-Zener-Stuckelberg model. In the second one, intermodulation measurements are employed by mixing pump and signal tones both in the transverse direction for studying a bifurcation between a stable spiral and a stable node attractors. Our results are applicable for developing sensitive signal receivers with high gain for both the radio frequency and the microwave bands.

quant-ph↗

arXiv2019

Multiphoton resonances in nitrogen-vacancy defects in diamond

Dense ensembles of nitrogen vacancy (NV) centers in diamond are of interest for various applications including magnetometry, masers, hyperpolarization and quantum memory. All of the applications above may benefit from a non-linear response of the ensemble, and hence multiphoton processes are of importance. We study an enhancement of the NV ensemble multiphoton response due to coupling to a superconducting cavity or to an ensemble of Nitrogen 14 substitutional defects (P1). In the latter case, the increased NV sensitivity allowed us to probe the P1 hyperfine splitting. As an example of an application, an increased responsivity to magnetic field is demonstrated.

quant-ph↗

arXiv2019

Optical detection of paramagnetic defects in diamond using off-resonance excitation of NV centers

In this work we use fluorescence from nitrogen-vacancy defects in diamond to detect and explore other paramagnetic defects in the diamond, such as P1 defects, which are commonly undetectable through optical detection of magnetic resonance in standard conditions. Our method does not require overlap between the defects' resonances and therefore is applicable in a wide region of magnetic fields and frequencies, as verified by excellent fit to theoretical predictions. We propose a depolarization scheme of P1 defects to account for the observed data. To verify our results, we perform cavity-based detection of magnetic resonance and find a good agreement between the measured optically induced polarization and the value obtained theoretically from rate equations. The findings in this work may open the way to detection of paramagnetic defects outside of the diamond through the photoluminesence of nitrogen-vacancy defects, which might be useful for imaging in biology.

quant-ph↗

arXiv2018

Exploring the nonlinear regime of light-matter interaction using electronic spins in diamond

The coupling between defects in diamond and a superconducting microwave resonator is studied in the nonlinear regime. Both negatively charged nitrogen-vacancy and P1 defects are explored. The measured cavity mode response exhibits strong nonlinearity near a spin resonance. Data is compared with theoretical predictions and a good agreement is obtained in a wide range of externally controlled parameters. The nonlinear effect under study in the current paper is expected to play a role in any cavity-based magnetic resonance imaging technique and to impose a fundamental limit upon its sensitivity.

quant-ph↗

arXiv2012

Superconducting Nanowire Single Photon Detectors On-Fiber

We present a novel design of a superconducting nanowire single photon detector (SNSPD) fabricated on a core of a single mode optical fiber. The proposed design allows high overlap between the fiber light mode and the detector, and consequently, our fabricated devices can remain small in dimension and maintain speed of operation, without scarifying the detection efficiency. The on-fiber fabrication method is detailed, together with experimental results. The proposed method can be exploited in the future for the fabrication of other fiber coupled devices.

cond-mat.supr-con↗

arXiv2012

On-Fiber Optomechanical Cavity

A fully on-fiber optomechanical cavity is fabricated by patterning a suspended metallic mirror on the tip of an optical fiber. Optically induced self-excited oscillations of the suspended mirror are experimentally demonstrated. We discuss the feasibility of employing on-fiber optomechanical cavities for sensing applications. A theoretical analysis evaluates the sensitivity of the proposed sensor, which is assumed to operate in the region of self-excited oscillations, and the results are compared with the experimental data. Moreover, the sensitivity that is obtained in the region of self-excited oscillations is theoretically compared with the sensitivity that is achievable when forced oscillations are driven by applying an oscillatory external force.

physics.optics↗

arXiv2012

Optomechanical Cavity with a Buckled Mirror

We study an optomechanical cavity, in which a buckled suspended beam serves as a mirror. The mechanical resonance frequency of the beam obtains a minimum value near the buckling temperature. Contrary to the common case, in which self-excited oscillations of the suspended mirror are optically induced by injecting blue detuned laser light, in our case self-excited oscillations are observed with red detuned light. These observations are attributed to a retarded thermal (i.e. bolometric) force acting on the buckled mirror in the inwards direction (i.e. towards to other mirror). With relatively high laser power other interesting effects are observed including period doubling of self-excited oscillations and intermode coupling.

physics.optics↗

arXiv2012

Nonlinear Induction Detection of Electron Spin Resonance

We present a new approach to the induction detection of electron spin resonance (ESR) signals exploiting the nonlinear properties of a superconducting resonator. Our experiments employ a yttrium barium copper oxide (YBCO) superconducting stripline microwave (MW) resonator integrated with a microbridge. A strong nonlinear response of the resonator is thermally activated in the microbridge when exceeding a threshold in the injected MW power. The responsivity factor characterizing the ESR-induced change in the system's output signal is about 100 times larger when operating the resonator near the instability threshold, compared to the value obtained in the linear regime of operation. Preliminary experimental results, together with a theoretical model of this phenomenon are presented. Under appropriate conditions nonlinear induction detection of ESR can potentially improve upon the current capabilities of conventional linear induction detection ESR.

cond-mat.mes-hall↗

arXiv2011

Fabrication of Nb/Al(AlOx)/Nb DC SQUID by focused ion beam sculpturing

Highly reproducible Nb/Al(AlOx)/Nb Josephson junction based direct current superconducting quantum interference devices (DC SQUID) were fabricated by three dimensional etching using focused ion beam. Hysteretic and non-hysteretic DC SQUID with critical current ranging from 25 to 1100 microampere were fabricated by varying the Al barrier and oxygen exposure time. The fabricated DC SQUIDs have shown periodic flux dependence with high modulation factor reaching a value of 92% at 4.2 K.

cond-mat.supr-con↗

arXiv2010

Hysteresis and intermittency in a nano-bridge based suspended DC-SQUID

We study voltage response of nano-bridge based DC-SQUID fabricated on a Si\_{3}N\_{4} membrane. Such a configuration may help in reducing 1/f noise, which originates from substrate fluctuating defects. We find that the poor thermal coupling between the DC-SQUID and the substrate leads to strong hysteretic response of the SQUID, even though it is biased by an alternating current. In addition, when the DC-SQUID is biased near a threshold of spontaneous oscillations, the measured voltage has an intermittent pattern, which depends on the applied magnetic flux through the SQUID.

cond-mat.supr-con↗

arXiv2010

Metastability in a nano-bridge based hysteretic DC-SQUID embedded in superconducting microwave resonator

We study the metastable response of a highly hysteretic DC-SQUID made of a Niobium loop interrupted by two nano-bridges. We excite the SQUID with an alternating current and with direct magnetic flux, and find different stability zones forming diamond-like structures in the measured voltage across the SQUID. When such a SQUID is embedded in a transmission line resonator similar diamond structures are observed in the reflection pattern of the resonator. We have calculated the DC-SQUID stability diagram in the plane of the exciting control parameters, both analytically and numerically. In addition, we have obtained numerical simulations of the SQUID equations of motion, taking into account temperature variations and non-sinusoidal current-phase relation of the nano-bridges. Good agreement is found between experimental and theoretical results.

cond-mat.supr-con↗

arXiv2009

Intermode Dephasing in a Superconducting Stripline Resonator

We study superconducting stripline resonator (SSR) made of Niobium, which is integrated with a superconducting interference device (SQUID). The large nonlinear inductance of the SQUID gives rise to strong Kerr nonlinearity in the response of the SSR, which in turn results in strong coupling between different modes of the SSR. We experimentally demonstrate that such intermode coupling gives rise to dephasing of microwave photons. The dephasing rate depends periodically on the external magnetic flux applied to the SQUID, where the largest rate is obtained at half integer values (in units of the flux quantum). To account for our result we compare our findings with theory and find good agreement. Supplementary info at arXiv:0901.3133 .

cond-mat.supr-con↗

arXiv2009

Self-oscillations in a superconducting stripline resonator integrated with a DC-SQUID

We study self-sustained oscillations (SO) in a Nb superconducting stripline resonators (SSR) integrated with a DC superconducting quantum interface devices (SQUID). We find that both the power threshold where these oscillations start and the oscillations frequency are periodic in the applied magnetic flux threading the SQUID loop. A theoretical model which attributes the SO to a thermal instability in the DC-SQUID yields a good agreement with the experimental results. This flux dependant nonlinearity may be used for quantum state reading of a qubit-SSR integrated device.

cond-mat.supr-con↗