arXiv subjects

Olga Caballero-Calero

Publications and source records attributed to Olga Caballero-Calero.

5 recordsLinked to original sources

arXiv2026

Off-stoichiometric variable doping for exceptional power factors in L2$_1$ Fe$_2$VAlM$_x$ (M=Ti, W) epitaxial thin films

We show that the addition of Ti or W to stoichiometric L2$_1$ Fe$_2$VAl thin films by sputter codeposition produces off stoichiometric thin film alloys with superior thermoelectric properties than their stoichiometric counterparts. Ti incorporation induces p-type semiconducting behavior, while W incorporation shifts the material toward n-type, hereby enabling simultaneous tuning of both carrier types within a single parent (Fe$_2$VAl) material system, making it highly desirable for thermoelectric devices. The introduction of both Ti and W partly substitutes V in the stoichiometric compound. The partial substitution of V in the stoichiometric alloy allows fine-tuning the band structure of the system and transport properties. With this approach we obtain exceptional maximum power factor values for p and n-type films of 1300 $μ$W/m$\cdot$K$^2$ and 2100 $μ$W/m$\cdot$K$^2$ ,respectively, yielding maximum figures of merit zT of 0.07 and 0.14, respectively.

cond-mat.mtrl-sci↗

arXiv2025

Thermoelectric Performance Boost by Chemical Order in Epitaxial L2$_1$ (100) and (110) Oriented undoped Fe$_2$VAl Thin Films: An Experimental and Theoretical Study

This study demonstrates the direct correlation between the presence of the L2$_1$ ordered phase and the large enhancement in the thermoelectric performance of Fe$_2$VAl thin films deposited on MgO and Al$_2$O$_3$ substrates at temperatures varying between room temperature and 950$^{\circ}$C. We employ both experimental techniques and computational modeling to analyze the influence of crystallographic orientation and deposition temperature on the thermoelectric properties, including the Seebeck coefficient, electrical conductivity, and thermal conductivity. Our findings indicate that the presence of the L2$_1$ phase significantly enhances the power factor (PF) and figure of merit (zT), surpassing previously reported values for both bulk and thin film forms of Fe$_2$VAl, achieving a PF of 480 $μ$W/m$\cdot$K$^2$ and a zT of 0.025.

cond-mat.mtrl-sci↗

arXiv2023

All-Optical Domain Inversion in LiNbO3 Crystals by Visible Continuous-Wave Laser Irradiation

LiNbO3 is a distinguished multifunctional material where ferroelectric domain engineering is of paramount importance. This degree of freedom of the spontaneous polarization remarkably enhances the applicability of LiNbO3, for instance in nonlinear photonics. However, conventional electrical poling suffers from several drawbacks. Namely, the lithographic patterning of electrodes is cumbersome and expensive, and the spatial resolution is constrained. In this work, we report the first method for all-optical domain inversion of LiNbO3 crystals using continuous-wave visible light. While we mainly focus on iron-doped LiNbO3, the applicability of the method is also showcased in undoped congruent LiNbO3. The technique is outstandingly simple, low-cost and readily accessible. It relies on ubiquitous elements: a light source with low/moderate power, basic optics and a conductive surrounding medium, e.g. water. Light-induced domain inversion is unequivocally demonstrated and characterized by combination of several experimental techniques: pyroelectric trapping of charged microparticles, selective chemical etching, surface topography profilometry, scanning electron microscopy and 3D Cerenkov microscopy. The influence of light intensity, exposure time, laser spot size and surrounding medium is thoroughly studied. Overall, our all-optical method offers straightforward implementation of LiNbO3 ferroelectric domain engineering, potentially sparking new research endeavors aimed at novel optoelectronic applications of photovoltaic LiNbO3 platforms.

cond-mat.mtrl-sci↗

arXiv2023

CoSb3-based skutterudite nanocomposites prepared by cold sintering process with enhanced thermoelectric properties

We show here for the first time the use of a cold sintering process (CSP) to sinter CoSb3-based thermoelectric materials. CSP at 150 °C for 90 min under a uniaxial pressure of 750 MPa yields pieces with a relative density of 86 %, which is increased to around 92 % after a post-annealing at temperatures > 500 °C in Ar atmosphere. The reported CSP produces Te doped-CoSb3 nanocomposites with similar morphological and structural characteristics to the starting nanopowders obtained by ball milling in air atmosphere. The post-thermal treatment induces grain coalescence and grain growth, crystallite size growth as well as compositional changes in the nanocomposite, decreasing the amount of the main phase, CoSb3, and increasing the weight of secondary phase, CoSb2, up to a 30 wt% at 600 °C. Remarkably, the average valence for the Co, Sb and Te absorbing atoms is neither transformed by the sintering process nor by the subsequent heat treatment. The functional response of the sintered thermoelectric nanocomposites exhibits a maximum figure of merit of 0.12(3) at room temperature for the nanocomposites sintered by CSP with a subsequent post-annealing at 500 °C. This is mainly due to its low thermal conductivity in comparison with similar powders sintered by other approaches, and it is explained by the morphological and structural properties. These findings represent an attractive alternative for obtaining efficient thermoelectric skutterudites by a scalable and cost-effective route.

cond-mat.mtrl-sci↗

arXiv2018

Engineering a Full Gamut of Structural Colors in All-Dielectric Mesoporous Network Metamaterials

Structural colors are a result of the scattering of certain frequencies of the incident light on micro- or nanoscale features in a material. This is a quite different phenomenon from that of colors produced by absorption of different frequencies of the visible spectrum by pigments or dyes, which is the most common way of coloring used in our daily life. However, structural colors are more robust and can be engineered to span most of the visible spectrum without changing the base material, only its internal structure. They are abundant in nature, with examples as colorful as beetle shells and butterfly wings, but there are few ways of preparing them for large-scale commercial applications for real-world uses. In this work, we present a technique to create a full gamut of structural colors based on a low-cost, robust, and scalable fabrication of periodic network structures in porous alumina as well as the strategy to theoretically predict and engineer different colors on demand. We experimentally demonstrate mesoporous network metamaterial structures with engineered colors spanning the whole optical spectrum and discuss their applications in sensing, environmental monitoring, biomimetic tissues engineering, etc.

physics.optics↗