arXiv subjects

Olga Kazakova

Publications and source records attributed to Olga Kazakova.

At least 19 recordsLinked to original sources

arXiv2026

Revealing antenna-molecule coupling using virtual gain from synthetic complex frequency analysis

Synthetic complex frequency waves (CFWs) enhance spectral and spatial resolution by compensating loss through virtual gain. This approach is particularly useful in nano-photonics where loss is intrinsically linked to strong field confinement and system size. Here, we apply CFWs to metasurfaces composed of Fano-resonant plasmonic antennas with lithographically tunable coupling between the weak and strong coupling regimes and where loss may be reduced to the Drude damping limit. We quantitatively assess the impact of the virtual gain to find that, while reducing loss, internal coupling rates remain invariant. While the exceptional point associated with strong light-matter coupling is invariant under virtual gain, the cooperativity of Fano interference is enhanced. When the metasurfaces are functionalised with a molecular monolayer, CFWs are thus able to reveal a molecule's vibrational modes, even when obscured by loss, and allow direct extraction of the plasmon-molecule coupling strength. We thus use CFW analysis as a quantitative tool for revealing and assessing light matter-coupling.

physics.optics↗

arXiv2025

Thermoelectric Fingerprinting of Bloch- and Néel-type Skyrmions

Magnetic skyrmions are nanoscale spin textures that exhibit topological stability, which, along with novel thermal and electrical transport properties, make them the ideal candidates for a variety of novel technological applications. Accessing the skyrmion spin texture at the nanoscale and understanding its interaction with local thermal gradients is essential for engineering skyrmion-based transport phenomena. However, direct experimental insight into the local thermoelectric response of single skyrmions remains limited. To address this, we employ scanning thermoelectric microscopy~(SThEM) to probe the nanoscale thermoelectric response from a single skyrmion. By mapping the local thermoelectric voltage with nanoscale precision, we reveal a unique spatially resolved response that is the convolution of the underlying spin texture of the skyrmion and its interaction with the highly localised thermal gradient originating from the heated probe. We combine this with thermoelectric modelling of a range of skyrmion spin textures to reveal unique thermoelectric responses and allow the possibility of SThEM to be used as a tool to distinguish nanoscale spin textures. These findings provide fundamental insights into the interaction of topologically protected spin textures with local thermal gradients and the resultant spin transport. We demonstrate a novel route to characterise nanoscale spin textures, accelerating the material optimisation cycle, while also opening the possibility to harness skyrmions for spin caloritronics.

cond-mat.mes-hall↗

arXiv2025

Skyrmion motion in a synthetic antiferromagnet driven by asymmetric spin wave emission

Skyrmions have been proposed as new information carriers in racetrack memory devices. To realise such devices, a small size; high speed of propagation; and minimal skyrmion Hall angle are required. Synthetic antiferromagnets (SAFs) present the ideal materials system to realise these aims. In this work, we use micromagnetic simulations to propose a new method for manipulating them using exclusively global magnetic fields. An out-of-plane microwave field induces oscillations in the skyrmions radius which in turn emits spin waves. When a static in-plane field is added, this breaks the symmetry of the skyrmions and causes asymmetric spin wave emission. This in turn drives motion of the skyrmions, with the fastest velocities observed at the frequency of the intrinsic out-of-phase breathing mode of the pair of skyrmions. This behaviour is investigated over a range of experimentally realistic antiferromagnetic interlayer exchange coupling strengths, and the results compared to previous works studying similar motion driven with an oscillating electric field. Through this the true effect of varying the exchange coupling strength is determined, and greater insight is gained into the mechanism of skyrmion motion. These results will help to inform the design of future novel computing architectures based on the dynamics of skyrmions in synthetic antiferromagnets.

cond-mat.mes-hall↗

arXiv2025

Quantum anomalous Hall effect for metrology

The quantum anomalous Hall effect (QAHE) in magnetic topological insulators offers great potential to revolutionize quantum electrical metrology by establishing primary resistance standards operating at zero external magnetic field and realizing a universal "quantum electrical metrology toolbox" that can perform quantum resistance, voltage and current metrology in a single instrument. To realize such promise, significant progress is still required to address materials and metrological challenges -- among which, one main challenge is to make the bulk of the topological insulator sufficiently insulating to improve the robustness of resistance quantization. In this Perspective, we present an overview of the QAHE; discuss the aspects of topological material growth and characterization; and present a path towards an QAHE resistance standard realized in magnetically doped (Bi,Sb)$_2$Te$_3$ systems. We also present guidelines and methodologies for QAHE resistance metrology, its main limitations and challenges as well as modern strategies to overcome them.

cond-mat.mes-hall↗

arXiv2024

snompy: a package for modelling scattering-type scanning near-field optical microscopy

Scattering-type scanning near-field optical microscopy (s-SNOM) is a powerful technique for extreme subwavelength imaging and spectroscopy, with around 20 nm spatial resolution. But quantitative relationships between experiment and material properties requires modelling, which can be computationally and conceptually challenging. In this work, we present snompy an open-source Python library which contains implementations of two of the most common s-SNOM models, the finite dipole model (FDM) and the point dipole model (PDM). We show a series of typical uses for this package with demonstrations including simulating nano-Fourier transform infrared (FTIR) spectra and recovering permittivity from experimental s-SNOM data. We also discuss the challenges faced with this sort of modelling, such as competing descriptions of the models in literature, and finite size effects. We hope that snompy will make quantitative s-SNOM modelling more accessible to the wider research community, which will further empower the use of s-SNOM for investigating nanoscale material properties.

cond-mat.mtrl-sci↗

arXiv2024

Phase Coexistence and Transitions between Antiferromagnetic and Ferromagnetic States in a Synthetic Antiferromagnet

In synthetic antiferromagnets (SAFs) the combination of antiferromagnetic order and synthesis using conventional sputtering techniques is combined to produce systems that are advantageous for spintronics applications. Here we present the preparation and study of SAF multilayers possessing both perpendicular magnetic anisotropy and the Dzyaloshinskii-Moriya interaction. The multilayers have an antiferromagnetically (AF) aligned ground state but can be forced into a full ferromagnetic (FM) alignment by applying an out-of-plane field $\sim 100$~mT. We study the spin textures in these multilayers in their ground state as well as around the transition point between the AF and FM states, at fields $\sim 40$~mT, by imaging the spin textures using complementary methods: photo-emission electron, magnetic force, and Lorentz transmission electron microscopies. The transformation into a FM state by field proceeds by a nucleation and growth process, where first skyrmionic nuclei form, which broaden into regions containing a FM-aligned labyrinth pattern that eventually occupies the whole film. This process remarkably occurs without any significant change in the net magnetic moment of the multilayer. The mix of AF- and FM-aligned regions on the micron scale in the middle of this transition is reminiscent of a first-order phase transition that exhibits phase coexistence. These results are important for guiding the design of spintronic devices using chiral magnetic textures made from SAFs.

cond-mat.mes-hall↗

arXiv2023

Curvature-enhanced localised emission from dark states in wrinkled monolayer WSe2 at room temperature

Localised emission from defect states in monolayer transition metal dichalcogenides is of great interest for optoelectronic and quantum device applications. Recent progress towards high temperature localised emission relies on the application of strain to induce highly confined excitonic states. Here we propose an alternative paradigm based on curvature, rather than in-plane stretching, achieved through free-standing wrinkles of monolayer tungsten diselenide (WSe2). We probe these nanostructures using tip-enhanced optical spectroscopy to reveal the spatial localisation of out-of-plane polarised emission from the WSe2 wrinkles. Based on the photoluminescence and Raman scattering signatures resolved with nanoscale spatial resolution, we propose the existence of a manifold of spin-forbidden excitonic states that are activated by the local curvature of the WSe2. We are able to access these dark states through the out-of-plane polarised surface plasmon polariton resulting in enhanced strongly localised emission at room temperature, which is of potential interest for quantum technologies and photonic devices.

cond-mat.mes-hall↗

arXiv2021

Interfacial ferroelectricity in marginally twisted 2D semiconductors

Twisted heterostructures of two-dimensional crystals offer almost unlimited scope for the design of novel metamaterials. Here we demonstrate a room-temperature ferroelectric semiconductor that is assembled using mono- or few- layer MoS2. These van der Waals heterostructures feature broken inversion symmetry, which, together with the asymmetry of atomic arrangement at the interface of two 2D crystals, enables ferroelectric domains with alternating out-of-plane polarisation arranged into a twist-controlled network. The latter can be moved by applying out-of-plane electrical fields, as visualized in situ using channelling contrast electron microscopy. The interfacial charge transfer for the observed ferroelectric domains is quantified using Kelvin probe force microscopy and agrees well with theoretical calculations. The movement of domain walls and their bending rigidity also agrees well with our modelling results. Furthermore, we demonstrate proof-of-principle field-effect transistors, where the channel resistance exhibits a pronounced hysteresis governed by pinning of ferroelectric domain walls. Our results show a potential venue towards room temperature electronic and optoelectronic semiconductor devices with built-in ferroelectric memory functions.

cond-mat.mes-hall↗

arXiv2021

Data cluster analysis and machine learning for classification of twisted bilayer graphene

Twisted bilayer graphene (TBLG) has emerged as an exciting new material with tunable electronic properties ranging from superconductivity to correlated insulating phases. But current methods of fabrication and identification of TBLG are painstaking and laborious. In this work, we combine Raman spectroscopy with the Gaussian mixture model (GMM) data clustering algorithm to identify areas with particular twist angles, from a TBLG sample with a mixture of orientations. We present two approaches to this cluster analysis: training the GMM on Raman parameters returned by peak fits, and on full Raman spectra with dimensionality reduced by principal component analysis. In both cases we demonstrate that GMM can identify regions of distinct twist angle from within Raman datacubes. We also show that once a model has been trained, and the identified clusters labelled, the model can be reapplied to new Raman scans to assess the similarity between the materials in the new region and the testing region. This could enable high-throughput fabrication of TBLG, by allowing computerised detection of particular twist angles from automated large-area scans.

cond-mat.mtrl-sci↗

arXiv2021

Opportunities in Electrically Tunable 2D Materials Beyond Graphene: Recent Progress and Future Outlook

The interest in two-dimensional and layered materials continues to expand, driven by the compelling properties of individual atomic layers that can be stacked and/or twisted into synthetic heterostructures. The plethora of electronic properties as well as the emergence of many different quasiparticles, including plasmons, polaritons, trions and excitons with large, tunable binding energies that all can be controlled and modulated through electrical means has given rise to many device applications. In addition, these materials exhibit both room-temperature spin and valley polarization, magnetism, superconductivity, piezoelectricity that are intricately dependent on the composition, crystal structure, stacking, twist angle, layer number and phases of these materials. Initial results on graphene exfoliated from single bulk crystals motivated the development of wide-area, high purity synthesis and heterojunctions with atomically clean interfaces. Now by opening this design space to new synthetic two-dimensional materials "beyond graphene", it is possible to explore uncharted opportunities in designing novel heterostructures for electrical tunable devices. To fully reveal the emerging functionalities and opportunities of these atomically thin materials in practical applications, this review highlights several representative and noteworthy research directions in the use of electrical means to tune these aforementioned physical and structural properties, with an emphasis on discussing major applications of beyond graphene 2D materials in tunable devices in the past few years and an outlook of what is to come in the next decade.

cond-mat.mes-hall↗

arXiv2020

Thermoelectric signature of individual skyrmions

We experimentally study the thermoelectrical signature of individual skyrmions in chiral Pt/Co/Ru multilayers. Using a combination of controlled nucleation, single skyrmion annihilation, and magnetic field dependent measurements the thermoelectric signature of individual skyrmions is characterized. The observed signature is explained by the anomalous Nernst effect of the skyrmions spin structure. Possible topological contributions to the observed thermoelectrical signature are discussed. Such thermoelectrical characterization allows for non-invasive detection and counting of skyrmions and enables fundamental studies of topological thermoelectric effects on the nano scale

cond-mat.mes-hall↗

arXiv2019

Strongly Absorbing Nanoscale Infrared Domains within Graphene Bubbles

Graphene has shown great potential for modulating infrared (IR) light in devices as small as 350 nm. At these length scales, nanoscale features of devices, and their interaction with light, can be expected to play a significant role in device performance. Bubbles in van der Waals heterostructures are one such feature, which have recently attracted considerable attention thanks to their ability to modify the optoelectronic properties of 2D materials through strain. Here we use scattering-type scanning near-field optical microscopy (sSNOM) to measure the nanoscale IR response from a network of variously shaped bubbles in hexagonal boron nitride (hBN)-encapsulated graphene. We show that within individual bubbles there are distinct domains with strongly enhanced IR absorption. We correlate this with strain in the graphene, found with confocal Raman microscopy and vector decomposition analysis. This reveals intricate and varied strain configurations, in which bubbles of different shape induce more bi- or uniaxial strain configurations. Ridges in the bubbles, seen by atomic force microscopy (AFM), coincide with the domain boundaries, which leads us to attribute the domains to nanoscale strain differences in the graphene. This reveals pathways towards future strain-based graphene IR devices.

physics.app-ph↗

arXiv2019

European research on magnetic nanoparticles for biomedical applications: standardisation aspects

Magnetic nanoparticles have many applications in biomedicine and other technical areas. Despite their huge economic impact, there are no standardised procedures available to measure their basic magnetic properties. The International Organization for Standardization is working on a series of documents on the definition of characteristics of magnetic nanomaterials. We review previous and ongoing European research projects on characteristics of magnetic nanoparticles and present results of an online survey among European researchers.

physics.med-ph↗

arXiv2019

Nanoscale patterning of quasiparticle band alignment

Control of atomic-scale interfaces between materials with distinct electronic structures is crucial for the design and fabrication of most electronic devices. In the case of two-dimensional (2D) materials, disparate electronic structures can be realized even within a single uniform sheet, merely by locally applying different vertical bias voltages. Indeed, it has been suggested that nanoscale electronic patterning in a single sheet can be achieved by placing the 2D material on a suitably pre-patterned substrate, exploiting the sensitivity of 2D materials to their environment via band alignment, screening or hybridization. Here, we utilize the inherently nano-structured single layer (SL) and bilayer (BL) graphene on silicon carbide to laterally tune the electrostatic gating of adjacent SL tungsten disulphide (WS$_2$) in a van der Waals heterostructure. The electronic band alignments are mapped in energy and momentum space using angle-resolved photoemission with a spatial resolution on the order of 500~nm (nanoARPES). We find that the SL WS$_2$ band offsets track the work function of the underlying SL and BL graphene, and we relate such changes to observed lateral patterns of exciton and trion luminescence from SL WS$_2$, demonstrating ultimate control of optoelectronic properties at the nanoscale.

cond-mat.mes-hall↗

arXiv2019

Individual skyrmion manipulation by local magnetic field gradients

Magnetic skyrmions are topologically protected spin textures, stabilised in systems with strong Dzyaloshinskii-Moriya interaction (DMI). Several studies have shown that electrical currents can move skyrmions efficiently through spin-orbit torques. While promising for technological applications, current-driven skyrmion motion is intrinsically collective and accompanied by undesired heating effects. Here we demonstrate a new approach to control individual skyrmion positions precisely, which relies on the magnetic interaction between sample and a magnetic force microscopy (MFM) probe. We investigate perpendicularly magnetised X/CoFeB/MgO multilayers, where for X = W or Pt the DMI is sufficiently strong to allow for skyrmion nucleation in an applied field. We show that these skyrmions can be manipulated individually through the local field gradient generated by the scanning MFM probe with an unprecedented level of accuracy. Furthermore, we show that the probe stray field can assist skyrmion nucleation. Our proof-of-concepts results offer current-free paradigms to efficient individual skyrmion control.

cond-mat.mtrl-sci↗

arXiv2018

Probing the nanoscale origin of strain and doping in graphene-hBN heterostructures

We use confocal Raman microscopy and modified vector analysis methods to investigate the nanoscale origin of strain and carrier concentration in exfoliated graphene-hexagonal boron nitride (hBN) heterostructures on silicon dioxide (SiO2). Two types of heterostructures are studied: graphene on SiO2 partially coved by hBN, and graphene fully encapsulated between two hBN flakes. We extend the vector analysis methods to produce spatial maps of the strain and doping variation across the heterostructures. This allows us to visualise and directly quantify the much-speculated effect of the environment on carrier concentration as well as strain in graphene. Moreover, we demonstrate that variations in strain and carrier concentration in graphene arise from nanoscale features of the heterostructures such as fractures, folds and bubbles trapped between layers. For bubbles in hBN-encapsulated graphene, hydrostatic strain is shown to be greatest at bubble centres, whereas the maximum of carrier concentration is localised at bubble edges. Raman spectroscopy is shown to be a non-invasive tool for probing strain and doping in graphene, which could prove useful for engineering of two-dimensional devices.

cond-mat.mtrl-sci↗

arXiv2018

Infrared-to-violet tunable optical activity in atomic films of GaSe, InSe, and their heterostructures

Two-dimensional semiconductors - atomic layers of materials with covalent intra-layer bonding and weak (van der Waals or quadrupole) coupling between the layers - are a new class of materials with great potential for optoelectronic applications. Among those, a special position is now being taken by post-transition metal chalcogenides (PTMC), InSe and GaSe. It has recently been found that the band gap in 2D crystals of InSe more than doubles in the monolayer compared to thick multilayer crystals, while the high mobility of conduction band electrons is promoted by their light in-plane mass. Here, we use Raman and PL measurements of encapsulated few layer samples, coupled with accurate atomic force and transmission electron microscope structural characterisation to reveal new optical properties of atomically thin GaSe preserved by hBN encapsulation. The band gaps we observe complement the spectral range provided by InSe films, so that optical activity of these two almost lattice-matched PTMC films and their heterostructures densely cover the spectrum of photons from violet to infrared. We demonstrate the realisation of the latter by the first observation of interlayer excitonic photoluminescence in few-layer InSe-GaSe heterostructures. The spatially indirect transition is direct in k-space and therefore is bright, while its energy can be tuned in a broad range by the number of layers.

cond-mat.mes-hall↗

arXiv2018

Detection of ultra-low concentration NO2 in complex environment using epitaxial graphene sensors

We demonstrate proof-of-concept graphene sensors for environmental monitoring of ultra-low concentration NO2 in complex environments. Robust detection in a wide range of NO2 concentrations, 10-154 ppb, was achieved, highlighting the great potential for graphene-based NO2 sensors, with applications in environmental pollution monitoring, portable monitors, automotive and mobile sensors for a global real-time monitoring network. The measurements were performed in a complex environment, combining NO2/synthetic air/water vapour, traces of other contaminants and variable temperature in an attempt to fully replicate the environmental conditions of a working sensor. It is shown that the performance of the graphene-based sensor can be affected by co-adsorption of NO2 and water on the surface at low temperatures (<70 C). However, the sensitivity to NO2 increases significantly when the sensor operates at 150 C and the cross-selectivity to water, sulphur dioxide and carbon monoxide is minimized. Additionally, it is demonstrated that single-layer graphene exhibits two times higher carrier concentration response upon exposure to NO2 than bilayer graphene.

physics.ins-det↗