arXiv subjects

Oliver Brandt

Publications and source records attributed to Oliver Brandt.

At least 37 records · Page 2Linked to original sources

arXiv2024

Observation of dielectrically confined excitons in ultrathin GaN nanowires up to room temperature

The realization of semiconductor structures with stable excitons at room temperature is crucial for the development of excitonics and polaritonics. Quantum confinement has commonly been employed for enhancing excitonic effects in semiconductor heterostructures. Dielectric confinement, which is potentially much stronger, has proven to be more difficult to achieve because of the rapid nonradiative surface/interface recombination in hybrid dielectric-semiconductor structures. Here, we demonstrate intense excitonic emission from bare GaN nanowires with diameters down to 6 nm. The large dielectric mismatch between the nanowires and vacuum greatly enhances the Coulomb interaction, with the thinnest nanowires showing the strongest dielectric confinement and the highest radiative efficiency at room temperature. In situ monitoring of the fabrication of these structures allows one to accurately control the degree of dielectric enhancement. These ultrathin nanowires may constitute the basis for the fabrication of advanced low-dimensional structures with an unprecedented degree of confinement.

cond-mat.mes-hall↗

arXiv2024

Molecular Beam Epitaxy of GaN Nanowires on Epitaxial Graphene

We demonstrate an all-epitaxial and scalable growth approach to fabricate single-crystalline GaN nanowires on graphene by plasma-assisted molecular beam epitaxy. As substrate, we explore several types of epitaxial graphene layer structures synthesized on SiC. The different structures differ mainly in their total number of graphene layers. Because graphene is found to be etched under active N exposure, the direct growth of GaN nanowires on graphene is only achieved on multilayer graphene structures. The analysis of the nanowire ensembles prepared on multilayer graphene by Raman spectroscopy and transmission electron microscopy reveals the presence of graphene underneath as well as in between nanowires, as desired for the use of this material as contact layer in nanowire-based devices. The nanowires nucleate preferentially at step edges, are vertical, well aligned, epitaxial, and of comparable structural quality as similar structures fabricated on conventional substrates.

cond-mat.mtrl-sci↗

arXiv2024

Spontaneous nucleation and growth of GaN nanowires: Fundamental role of crystal polarity

We experimentally investigate whether crystal polarity affects the growth of GaN nanowires in plasma-assisted molecular beam epitaxy and whether their formation has to be induced by defects. For this purpose, we prepare smooth and coherently strained AlN layers on 6H-SiC(0001) and SiC(000$\bar{1}$) substrates to ensure a well-defined polarity and an absence of structural and morphological defects. On N-polar AlN, a homogeneous and dense N-polar GaN nanowire array forms, evidencing that GaN nanowires form spontaneously in the absence of defects. On Al-polar AlN, we do not observe the formation of Ga-polar GaN NWs. Instead, sparse N-polar GaN nanowires grow embedded in a Ga-polar GaN layer. These N-polar GaN nanowires are shown to be accidental in that the necessary polarity inversion is induced by the formation of Si$_{x}$N. The present findings thus demonstrate that spontaneously formed GaN nanowires are irrevocably N-polar. Due to the strong impact of the polarity on the properties of GaN-based devices, these results are not only essential to understand the spontaneous formation of GaN nanowires but also of high technological relevance.

cond-mat.mtrl-sci↗

arXiv2024

Self-regulated radius of spontaneously formed GaN nanowires in molecular beam epitaxy

We investigate the axial and radial growth of GaN nanowires upon a variation of the Ga flux during molecular beam epitaxial growth. An increase in the Ga flux promotes radial growth without affecting the axial growth rate. In contrast, a decrease in the Ga flux reduces the axial growth rate without any change in the radius. These results are explained by a kinetic growth model that accounts for both the diffusion of Ga adatoms along the side facets towards the nanowire tip and the finite amount of active N available for the growth. The model explains the formation of a new equilibrium nanowire radius after increasing the Ga flux and provides an explanation for two well known but so far not understood experimental facts: the necessity of effectively N-rich conditions for the spontaneous growth of GaN nanowires and the increase in nanowire radius with increasing III/V flux ratios.

cond-mat.mtrl-sci↗

arXiv2024

Monitoring the formation of nanowires by line-of-sight quadrupole mass spectrometry: a comprehensive description of the temporal evolution of GaN nanowire ensembles

We use line-of-sight quadrupole mass spectrometry to monitor the spontaneous formation of GaN nanowires on Si during molecular beam epitaxy. We find that the temporal evolution of nanowire ensembles is well described by a double logistic function. The analysis of the temporal evolution of nanowire ensembles prepared under a wide variety of growth conditions allows us to construct a growth diagram which can be used to predict the average delay time that precedes nanowire formation.

cond-mat.mtrl-sci↗

arXiv2024

Electrical characterization of all-epitaxial Fe/GaN(0001) Schottky tunnel contacts

We analyze the properties of Fe Schottky contacts prepared in situ on n-type GaN(0001) by molecular beam epitaxy. In particular, we investigate the suitability of these epitaxial Fe layers for electrical spin injection. Current-voltage-temperature measurements demonstrate pure field emission for Fe/GaN:Si Schottky diodes with [Si] = 5 $\times$ 10$^{18}$ cm$^{-3}$. The Schottky barrier height of the clean, epitaxial Fe/GaN interface is determined by both current-voltage-temperature and capacitance-voltage techniques to be (1.47 $\pm$ 0.09) eV.

cond-mat.mtrl-sci↗

arXiv2024

Polarity-induced selective area epitaxy of GaN nanowires

We present a conceptually novel approach to achieve selective area epitaxy of GaN nanowires. The approach is based on the fact that these nanostructures do not form in plasma-assisted molecular beam epitaxy on structurally and chemically uniform cation-polar substrates. By in situ depositing and nitridating Si on a Ga-polar GaN film, we locally reverse the polarity to induce the selective area epitaxy of N-polar GaN nanowires. We show that the nanowire number density can be controlled over several orders of magnitude by varying the amount of pre-deposited Si. Using this growth approach, we demonstrate the synthesis of single-crystalline and uncoalesced nanowires with diameters as small as 20 nm. The achievement of nanowire number densities low enough to prevent the shadowing of the nanowire sidewalls from the impinging fluxes paves the way for the realization of homogeneous core-shell heterostructures without the need of using ex situ pre-patterned substrates.

physics.app-ph↗

arXiv2023

Electrical properties of ScN(111) layers grown on GaN(0001) by plasma-assisted molecular beam epitaxy

We investigate the electrical properties of nominally undoped, 10-40-nm-thick ScN(111) layers grown on nearly lattice-matched GaN:Fe/Al$_2$O$_3$(0001) templates by plasma-assisted molecular beam epitaxy. Hall-effect measurements yield electron concentrations of 0.7-3.1$\times 10^{19}$ $\text{cm}^{-3}$ and mobilities of 50-160 cm$^{2}$V$^{-1}$s$^{-1}$ at room temperature. The temperature-dependent (4-360 K) conductivity exhibits two distinct regimes, suggesting two-band conduction in an impurity band and the conduction band. Assuming a single shallow donor in ScN and employing the standard two-band conduction model, we extract the carrier density and mobility in these bands. The results reveal nondegenerate characteristics for the 40-nm-thick layer, while the thinner layers are weakly degenerate. For the nondegenerate layer, the donor ionization energy amounts to approximately 12 meV. The electron mobility of the layers is limited by ionized impurity scattering and phonon scattering at low and high temperatures, respectively. Fits with an expression for optical phonon scattering developed for weakly degenerate semiconductors return an effective phonon energy of $(61 \pm 5)$ meV, in between the energies of the longitudinal optical ($\approx 84$ meV) and transverse optical ($\approx 45$ meV) phonon modes in ScN.

physics.app-ph↗

arXiv2023

Composition and optical properties of (In,Ga)As nanowires grown by group-III-assisted molecular beam epitaxy

(In,Ga) alloy droplets are used to catalyse the growth of (In,Ga)As nanowires by molecular beam epitaxy on Si(111) substrates. The composition, morphology and optical properties of these nanowires can be tuned by the employed elemental fluxes. To incorporate more than 10% of In, a high In/(In+Ga) flux ratio above 0.7 is required. We report a maximum In content of almost 30% in bulk (In,Ga)As nanowires for an In/(In+Ga) flux ratio of 0.8. However, with increasing In/(In+Ga) fl ux ratio, the nanowire length and diameter are notably reduced. Using photoluminescence and cathodoluminescence spectroscopy on nanowires covered by a passivating (In,Al)As shell, two luminescence bands are observed. A significant segment of the nanowires shows homogeneous emission, with a wavelength corresponding to the In content in this segment, while the consumption of the catalyst droplet leads to a spectrally-shifted emission band at the top of the nanowires. The (In,Ga)As nanowires studied in this work provide a new approach for the integration of infrared emitters on Si platforms.

cond-mat.mtrl-sci↗

arXiv2023

Sequential directional deposition of one-sided (In,Ga)N shells on GaN nanowires by molecular beam epitaxy

Capitalizing on the directed nature of the atomic fluxes in molecular beam epitaxy, we propose and demonstrate the sequential directional deposition of lateral (In,Ga)N shells on GaN nanowires. In this approach, a sub-monolayer thickness of each constituent atomic species, i.e. Ga, In, and N, is deposited subsequently from the same direction by rotating the sample and operating the shutters accordingly. Using multiple iterations of this process, we achieve the growth of homogeneous shells on a single side facet of the nanowires. For higher In content and thus lattice mismatch, we observe a strain-induced bending of the nanowire heterostructures. The incorporation of In and the resulting emission spectra are systematically investigated as a function of both the growth temperature and the In/Ga flux ratio.

cond-mat.mtrl-sci↗

arXiv2023

Growth mechanisms in molecular beam epitaxy for GaN-(In,Ga)N core-shell nanowires emitting in the green spectral range

Using molecular beam epitaxy, we demonstrate the growth of (In,Ga)N shells emitting in the green spectral range around very thin (35 nm diameter) GaN core nanowires. These GaN nanowires are obtained by self-assembled growth on TiN. We present a qualitative shell growth model accounting for both the three-dimensional nature of the nanostructures as well as the directionality of the atomic fluxes. This model allows us, on the one hand, to optimise the conditions for high and homogeneous In incorporation and, on the other hand, to explain the influence of changes in the growth conditions on the sample morphology and In content. Specifically, the impact of the V/III and In/Ga flux ratios, the rotation speed and the rotation direction are investigated. Notably, with In acting as surfactant, the ternary (In,Ga)N shells are much more homogeneous in thickness along the NW length than their binary GaN counterparts.

cond-mat.mtrl-sci↗

arXiv2023

Density control of GaN nanowires at the wafer scale using self-assembled SiN$_x$ patches on sputtered TiN(111)

The self-assembly of heteroepitaxial GaN nanowires using either molecular beam epitaxy (MBE) or metal-organic vapor phase epitaxy (MOVPE) mostly results in wafer-scale ensembles with ultrahigh ($>10$ $μ$m$^{-2}$) or ultralow ($<1$ $μ$m$^{-2}$) densities, respectively. A simple means to tune the density of well-developed nanowire ensembles between these two extremes is generally lacking. Here, we examine the self-assembly of SiN$_x$ patches on TiN(111) substrates which are eventually acting as seeds for the growth of GaN nanowires. We first found that if prepared by reactive sputtering, the TiN surface is characterized by \{100\} facets for which the GaN incubation time is extremely long. Fast GaN nucleation is only obtained after deposition of a sub-monolayer of SiN$_x$ atoms prior to the GaN growth. By varying the amount of pre-deposited SiN$_x$, the GaN nanowire density could be tuned by three orders of magnitude with excellent uniformity over the entire wafer, bridging the density regimes conventionally attainable by direct self-assembly with MBE or MOVPE. The analysis of the nanowire morphology agrees with a nucleation of the GaN nanowires on nanometric SiN$_x$ patches. The photoluminescence analysis of single freestanding GaN nanowires reveals a band edge luminescence dominated by excitonic transitions that are broad and blue shifted compared to bulk GaN, an effect that is related to the small nanowire diameter and to the presence of a thick native oxide. The approach developed here can be principally used for tuning the density of most III-V semiconductors nucleus grown on inert surfaces like 2D materials.

cond-mat.mtrl-sci↗

arXiv2023

Excitonic and deep-level emission from N- and Al-polar homoepitaxial AlN grown by molecular beam epitaxy

Using low-temperature cathodoluminescence spectroscopy, we study the properties of N- and Al-polar AlN layers grown by molecular beam epitaxy on bulk AlN{0001}. Compared to the bulk AlN substrate, layers of both polarities feature a suppression of deep-level luminescence, a total absence of the prevalent donor with an exciton binding energy of 28 meV, and a much increased intensity of the emission from free excitons. The dominant donor in these layers is characterized by an associated exciton binding energy of 13 meV. The observation of excited exciton states up to the exciton continuum allows us to directly extract the $Γ_{5}$ free exciton binding energy of 57 meV.

cond-mat.mtrl-sci↗

arXiv2023

Optical properties of ScN layers grown on Al$_{2}$O$_{3}$(0001) by plasma-assisted molecular beam epitaxy

An accurate knowledge of the optical constants (refractive index $n$ and extinction coefficient $k$) of ScN is crucial for understanding the optical properties of this binary nitride semiconductor as well as for its use in optoelectronic applications. Using spectroscopic ellipsometry in a spectral range from far infrared to far ultraviolet (0.045-8.5 eV), we determine $n$ and $k$ of ScN layers grown on Al$_{2}$O$_{3}$(0001) substrates by plasma-assisted molecular beam epitaxy. Fits of ellipsometry data return the energies of four oscillators representing critical points in the band structure of ScN, namely, 2.03, 3.89, 5.33, and 6.95 eV. As the infrared range is dominated by free carriers, the vibrational properties of the layers are examined by Raman spectroscopy. Despite the rocksalt structure of ScN, several first-order phonon modes are observed, suggesting a high density of point defects consistent with the high electron density deduced from Hall measurements. Finally, photoluminescence measurements reveal an emission band slightly above the lowest direct bandgap. We attribute the redshift of the peak emission energy from 2.3 to 2.2 eV with increasing layer thickness to a reduction of the O concentration in the layers.

cond-mat.mtrl-sci↗

arXiv2023

Lattice parameters of Sc$_{\boldsymbol{\mathsf{x}}}$Al$_{\boldsymbol{\mathsf{1-x}}}$N layers grown on GaN(0001) by plasma-assisted molecular beam epitaxy

An accurate knowledge of the lattice parameters of the new nitride Sc$_\textit{x}$Al$_\textit{1-x}$N is essential for understanding the elastic and piezoelectric properties of this compound as well as for the ability to engineer its strain state in heterostructures. Using high-resolution x-ray diffractometry, we determine the lattice parameters of 100-nm-thick undoped Sc$_\textit{x}$Al$_\textit{1-x}$N layers grown on GaN(0001) templates by plasma-assisted molecular beam epitaxy. The Sc content $\textit{x}$ of the layers is measured independently by both x-ray photoelectron spectroscopy and energy-dispersive x-ray spectroscopy and ranges from 0 to 0.25. The in-plane lattice parameter of the layers linearly increases with increasing $\textit{x}$, while their out-of-plane lattice parameter remains constant. Layers with $\textit{x}$ $\approx$ 0.09 are found to be lattice matched to GaN, resulting in a smooth surface and a structural perfection equivalent to that of the GaN underlayer. In addition, a two-dimensional electron gas is induced at the Sc$_\textit{x}$Al$_\textit{1-x}$N/GaN heterointerface, with the highest sheet electron density and mobility observed for lattice-matched conditions.

cond-mat.mtrl-sci↗

arXiv2022

Carrier Recombination in Highly Uniform and Phase-Pure GaAs/(Al,Ga)As Core/Shell Nanowire Arrays on Si(111): Mott Transition and Internal Quantum Efficiency

GaAs-based nanowires are among the most promising candidates for realizing a monolithical integration of III-V optoelectronics on the Si platform. To realize their full potential for applications as light absorbers and emitters, it is crucial to understand their interaction with light governing the absorption and extraction efficiency, as well as the carrier recombination dynamics determining the radiative efficiency. Here, we study the spontaneous emission of zincblende GaAs/(Al,Ga)As core/shell nanowire arrays by $μ$-photoluminescence spectroscopy. These ordered arrays are synthesized on patterned Si(111) substrates using molecular beam epitaxy, and exhibit an exceptionally low degree of polytypism for interwire separations exceeding a critical value. We record emission spectra over more than five orders of excitation density for both steady-state and pulsed excitation to identify the nature of the recombination channels. An abrupt Mott transition from excitonic to electron-hole-plasma recombination is observed, and the corresponding Mott density is derived. Combining these experiments with simulations and additional direct measurements of the external quantum efficiency using a perfect diffuse reflector as reference, we are able to extract the internal quantum efficiency as a function of carrier density and temperature as well as the extraction efficiency of the nanowire array. The results vividly document the high potential of GaAs/(Al,Ga)As core/shell nanowires for efficient light emitters integrated on the Si platform. Furthermore, the methodology established in this work can be applied to nanowires of any other materials system of interest for optoelectronic applications.

cond-mat.mtrl-sci↗

arXiv2022

A route for the top-down fabrication of ordered ultrathin GaN nanowires

Ultrathin GaN nanowires (NWs) are attractive to maximize surface effects and as building block in high-frequency transistors. Here, we introduce a facile route for the top-down fabrication of ordered arrays of GaN NWs with aspect ratios exceeding $10$ and diameters below $20\,$nm. Highly uniform thin GaN NWs are first obtained by using electron beam lithography to pattern a Ni/SiN$_x$ hard mask, followed by dry etching and wet etching in hot KOH. The SiN$_x$ is found to work as an etch stop during wet etching in hot KOH. Arrays with NW diameters down to $(33 \pm5)\,$nm can be achieved with a yield exceeding $99.9\,\%$. Further reduction of the NW diameter down to $5\,$nm is obtained by applying digital etching which consists in plasma oxidation followed by wet etching in hot KOH. The NW radial etching depth is tuned by varying the RF power during plasma oxidation. NW breaking or bundling is observed for diameters below $\approx 20\,$nm, an effect that is associated to capillary forces acting on the NWs during sample drying in air. This effect can be principally mitigated using critical point dryers. Interestingly, this mechanical instability of the NWs is found to occur at much smaller aspect ratios than what is predicted for models dealing with macroscopic elastic rods. Explicit calculations of buckling states show an improved agreement when considering an inclined water surface, as can be expected if water assembles into droplets. The proposed fabrication route can be principally applied to any GaN/SiN$_{x}$ nanostructures and allows regrowth after removal of the SiN$_{x}$ mask.

cond-mat.mtrl-sci↗

arXiv2022

X-ray scattering study of GaN nanowires grown on Ti/Al$_{2}$O$_{3}$ by molecular beam epitaxy

GaN nanowires (NWs) grown by molecular beam epitaxy on Ti films sputtered on Al$_{2}$O$_{3}$ are studied by X-ray diffraction (XRD) and grazing incidence small-angle X-ray scattering (GISAXS). XRD, performed both in symmetric Bragg reflection and at grazing incidence, reveals Ti, Ti$_{3}$O, Ti$_{3}$Al, and TiO$_x$N$_y$ crystallites with in-plane and out-of-plane lattice parameters intermediate between those of Al$_{2}$O$_{3}$ and GaN. These topotaxial crystallites in Ti film, formed due to interfacial reactions and N exposure, possess fairly little misorientation with respect to Al$_{2}$O$_{3}$. As a result, GaN NWs grow on the top TiN layer possessing a high degree of epitaxial orientation with respect to the substrate. The measured GISAXS intensity distributions are modeled by the Monte Carlo method taking into account the orientational distributions of NWs, a variety of their cross-sectional shapes and sizes, and roughness of their side facets. The cross-sectional size distributions of the NWs and the relative fractions of $(1\bar{1}00)$ and $(11\bar{2}0)$ side facets are determined.

cond-mat.mtrl-sci↗