arXiv subjects

Oliver Hartwig

Publications and source records attributed to Oliver Hartwig.

12 recordsLinked to original sources

arXiv2024

Piezoresistive PtSe$_2$ pressure sensors with reliable high sensitivity and their integration into CMOS ASIC substrates

Membrane-based sensors are an important market for microelectromechanical systems (MEMS). Two-dimensional (2D) materials, with their low mass, are excellent candidates for suspended membranes to provide high sensitivity, small footprint sensors. The present work demonstrates pressure sensors employing large-scale-synthesized 2D platinum diselenide (PtSe${_2}$) films as piezoresistive membranes supported only by a thin polymer layer. We investigate three different synthesis methods with contrasting growth parameters and establish a reliable high yield fabrication process for suspended PtSe${_2}$/PMMA membranes across sealed cavities. The pressure sensors reproducibly display sensitivities above 6 x 10${^4}$ kPa${^{-1}}$. We show that the sensitivity clearly depends on the membrane diameter and the piezoresistive gauge factor of the PtSe${_2}$ film. Reducing the total device size by decreasing the number of membranes within a device leads to a significant increase in the area-normalized sensitivity. This allows the manufacturing of pressure sensors with high sensitivity but a much smaller device footprint than the current state-of-the-art MEMS technology. We further integrate PtSe${_2}$ pressure sensors with CMOS technology, improving the technological readiness of PtSe${_2}$-based MEMS and NEMS devices.

physics.app-ph↗

arXiv2024

3D printing of hierarchical structures made of inorganic silicon-rich glass featuring self-forming nanogratings

Hierarchical structures are abundant in nature, such as in the superhydrophobic surfaces of lotus leaves and the structural coloration of butterfly wings. They consist of ordered features across multiple size scales, and their unique properties have attracted enormous interest in wide-ranging fields, including energy storage, nanofluidics, and nanophotonics. Femtosecond lasers, capable of inducing various material modifications, have shown promise for manufacturing tailored hierarchical structures. However, existing methods such as multiphoton lithography and 3D printing using nanoparticle-filled inks typically involve polymers and suffer from high process complexity. Here, we demonstrate 3D printing of hierarchical structures in inorganic silicon-rich glass featuring self-forming nanogratings. This approach takes advantage of our finding that femtosecond laser pulses can induce simultaneous multiphoton crosslinking and self-formation of nanogratings in hydrogen silsesquioxane (HSQ). The 3D printing process combines the 3D patterning capability of multiphoton lithography and the efficient generation of periodic structures by the self-formation of nanogratings. We 3D-printed micro-supercapacitors with large surface areas and a remarkable areal capacitance of 1 mF/cm^2 at an ultrahigh scan rate of 50 V/s, thereby demonstrating the utility of our 3D printing approach for device applications in emerging fields such as energy storage.

physics.app-ph↗

arXiv2023

Non-Volatile Resistive Switching of Polymer Residues in 2D Material Memristors

Two-dimensional (2D) materials are popular candidates for emerging nanoscale devices, including memristors. Resistive switching (RS) in such 2D material memristors has been attributed to the formation and dissolution of conductive filaments created by the diffusion of metal ions between the electrodes. However, the area-scalable fabrication of patterned devices involves polymers that are difficult to remove from the 2D material interfaces without damage. Remaining polymer residues are often overlooked when interpreting the RS characteristics of 2D material memristors. Here, we demonstrate that the parasitic residues themselves can be the origin of RS. We emphasize the necessity to fabricate appropriate reference structures and employ atomic-scale material characterization techniques to properly evaluate the potential of 2D materials as the switching layer in vertical memristors. Our polymer-residue-based memristors exhibit RS typical for a filamentary mechanism with metal ion migration, and their performance parameters are strikingly similar to commonly reported 2D material memristors. This reveals that the exclusive consideration of electrical data without a thorough verification of material interfaces can easily lead to misinterpretations about the potential of 2D materials for memristor applications.

cond-mat.mes-hall↗

arXiv2023

Metal-Organic Chemical Vapor Deposition of PtSe2

Platinum diselenide (PtSe2), a novel two-dimensional material from the class of noble-metal dichalcogenide (NMD), has recently received significant attention due to its outstanding properties. PtSe2, which undergoes a semi metallic to semiconductor transition when thinned, offers a band-gap in the infrared range and good air stability. These properties make it a prime active material in optoelectronic and chemical sensing devices. However, a synthesis method that can produce large-scale and reliable high quality PtSe2 is highly sought after. Here, we present PtSe2 growth by metal organic chemical vapor deposition. Films were grown on a variety of centimeter scale substrates and were characterized by Raman, X-ray photoelectron and X-ray diffraction spectroscopy, as well as scanning tunneling microscopy and spectroscopy. Domains within the films are found to be up to several hundred nanometers in size, and atomic scale measurements show their highly ordered crystalline structure. The thickness of homogenous films can be controlled via the growth time. This work provides fundamental guidance for the synthesis and implementation of high quality, large-scale PtSe2 layers, hence offering the key requirement for the implementation of PtSe2 in future electronic devices.

cond-mat.mtrl-sci↗

arXiv2022

Two-dimensional Platinum Diselenide Waveguide-Integrated Infrared Photodetectors

Low cost, easily integrable photodetectors (PDs) for silicon (Si) photonics are still a bottleneck for photonic integrated circuits (PICs), especially for wavelengths above 1.8 $μ$m. Multilayered platinum diselenide (PtSe$_2$) is a semi-metallic two-dimensional (2D) material that can be synthesized below 450$°$C. We integrate PtSe$_2$ based PDs directly by conformal growth on Si waveguides. The PDs operate at 1550 nm wavelength with a maximum responsivity of 11 mA/W and response times below 8.4 $μ$s. Fourier transform infrared spectroscopy (FTIR) in the wavelength range from 1.25 $μ$m to 28 $μ$m indicates the suitability of PtSe$_2$ for PDs far into the infrared wavelength range. Our PtSe$_2$ PDs integrated by direct growth outperform PtSe$_2$ PDs manufactured by standard 2D layer transfer. The combination of IR responsivity, chemical stability, selective and conformal growth at low temperatures, and the potential for high carrier mobility, make PtSe$_2$ an attractive 2D material for optoelectronics and PICs.

physics.app-ph↗

arXiv2022

Stacking polymorphism in PtSe$_2$ drastically affects its electromechanical properties

PtSe$_2$ is one of the most promising materials for the next generation of piezoresistive sensors. However, the large-scale synthesis of homogeneous thin films with reproducible electromechanical properties is challenging due to polycrystallinity. We show that stacking phases other than the AA-stacking in the 1T phase become thermodynamically available at elevated temperatures. We show that these can make up a significant fraction in a polycrystalline thin film and discuss methods to characterize these stacking phases. Lastly, we estimate their gauge factors, which vary strongly and significantly impact the performance of a nanoelectromechanical device.

cond-mat.mtrl-sci↗

arXiv2021

Synthesis and thermal stability of TMD thin films: A comprehensive XPS and Raman study

Transition metal dichalcogenides (TMDs) have been a core constituent of 2D material research throughout the last decade. Over this time, research focus has progressively shifted from synthesis and fundamental investigations, to exploring their properties for applied research such as electrochemical applications and integration in electrical devices. Due to the rapid pace of development, priority is often given to application-oriented aspects while careful characterisation and analysis of the TMD materials themselves is occasionally neglected. This can be particularly evident for characterisations involving X-ray photoelectron spectroscopy (XPS), where measurement, peak-fitting, and analysis can be complex and nuanced endeavours requiring specific expertise. To improve the availability and accessibility of reference information, here we present a detailed peak-fitted XPS analysis of ten transition metal chalcogenides. The materials were synthesised as large-area thin-films on SiO2 using direct chalcogenisation of pre-deposited metal films. Alongside XPS, the Raman spectra with several excitation wavelengths for each material are also provided. These complementary characterisation methods can provide a more complete understanding of the composition and quality of the material. As material stability is a crucial factor when considering applications, the in-air thermal stability of the TMDs was investigated after several annealing points up to 400 °C. This delivers a trend of evolving XPS and Raman spectra for each material which improves interpretation of their spectra while also indicating their ambient thermal limits. This provides an accessible library and set of guidelines to characterise, compare, and discuss TMD XPS and Raman spectra.

cond-mat.mtrl-sci↗

arXiv2021

Correlating Nanocrystalline Structure with Electronic Properties in 2D Platinum Diselenide

Platinum diselenide (PtSe${_2}$) is a two-dimensional (2D) material with outstanding electronic and piezoresistive properties. The material can be grown at low temperatures in a scalable manner which makes it extremely appealing for many potential electronics, photonics, and sensing applications. Here, we investigate the nanocrystalline structure of different PtSe${_2}$ thin films grown by thermally assisted conversion (TAC) and correlate them with their electronic and piezoresistive properties. We use scanning transmission electron microscopy for structural analysis, X-ray photoelectron spectroscopy (XPS) for chemical analysis, and Raman spectroscopy for phase identification. Electronic devices are fabricated using transferred PtSe${_2}$ films for electrical characterization and piezoresistive gauge factor measurements. The variations of crystallite size and their orientations are found to have a strong correlation with the electronic and piezoresistive properties of the films, especially the sheet resistivity and the effective charge carrier mobility. Our findings may pave the way for tuning and optimizing the properties of TAC-grown PtSe${_2}$ towards numerous applications.

cond-mat.mtrl-sci↗

arXiv2021

Synthesis and characterisation of thin-film platinum disulfide and platinum sulfide

Group-10 transition metal dichalcogenides (TMDs) are rising in prominence within the highly innovative field of 2D materials. While PtS2 has been investigated for potential electronic applications, due to its high charge-carrier mobility and strong layer-dependent bandgap, it has proven to be one of the more difficult TMDs to synthesise. In contrast to most TMDs, Pt has a significantly more stable monosulfide, the non-layered PtS. The existence of two stable platinum sulfides, sometimes within the same sample, has resulted in much confusion between the materials in the literature. Neither of these Pt sulfides have been thoroughly characterised as-of-yet. Here we utilise time-efficient, scalable methods to synthesise high-quality thin films of both Pt sulfides on a variety of substrates. The competing nature of the sulfides and limited thermal stability of these materials is demonstrated. We report peak-fitted X-ray photoelectron spectra, and Raman spectra using a variety of laser wavelengths, for both materials. This systematic characterisation provides a guide to differentiate between the sulfides using relatively simple methods which is essential to enable future work on these interesting materials.

cond-mat.mtrl-sci↗

arXiv2020

Spectroscopic thickness and quality metrics for PtSe$_2$ layers produced by top-down and bottom-up techniques

Thin films of noble-metal-based transition metal dichalcogenides, such as PtSe$_2$, have attracted increasing attention due to their interesting layer-number dependent properties and application potential. While it is difficult to cleave bulk crystals down to mono- and few-layers, a range of growth techniques have been established producing material of varying quality and layer number. However, to date, no reliable high-throughput characterization to assess layer number exists. Here, we use top-down liquid phase exfoliation (LPE) coupled with centrifugation to produce widely basal plane defect-free PtSe$_2$ nanosheets of varying sizes and thicknesses. Quantification of the lateral dimensions by statistical atomic force microscopy allows us to quantitatively link information contained in optical spectra to the dimensions. For LPE nanosheets we establish metrics for lateral size and layer number based on extinction spectroscopy. Further, we compare the Raman spectroscopic response of LPE nanosheets with micromechanically exfoliated PtSe$_2$, as well as thin films produced by a range of bottom up techniques. We demonstrate that the Eg1 peak position and the intensity ratio of the Eg1/ A1g1 peaks can serve as robust metric for layer number across all sample types and will be of importance in future benchmarking of PtSe$_2$ films.

physics.app-ph↗

arXiv2020

Three-dimensional printing of silica-glass structures with submicrometric features

Humanity's interest in manufacturing silica-glass objects extends back over three thousand years. Silica glass is resistant to heating and exposure to many chemicals, and it is transparent in a wide wavelength range. Due to these qualities, silica glass is used for a variety of applications that shape our modern life, such as optical fibers in medicine and telecommunications. However, its chemical stability and brittleness impede the structuring of silica glass, especially on the small scale. Techniques for three-dimensional (3D) printing of silica glass, such as stereolithography and direct ink writing, have recently been demonstrated, but the achievable minimum feature size is several tens of micrometers. While submicrometric silica-glass structures have many interesting applications, for example in micro-optics, they are currently manufactured using lithography techniques, which severely limits the 3D shapes that can be realized. Here, we show 3D printing of optically transparent silica-glass structures with submicrometric features. We achieve this by cross-linking hydrogen silsesquioxane to silica glass using nonlinear absorption of laser light followed by the dissolution of the unexposed material. We print a functional microtoroid resonator with out-of-plane fiber couplers to demonstrate the new possibilities for designing and building silica-glass microdevices in 3D.

physics.app-ph↗

arXiv2018

Coupling single photons from discrete quantum emitters in WSe$_2$ to lithographically defined plasmonic slot-waveguides

We report the observation of the generation and routing of single plasmons generated by localized excitons in a WSe$_2$ monolayer flake exfoliated onto lithographically defined Au-plasmonic waveguides. Statistical analysis of the position of different quantum emitters shows that they are $(3.3 \pm 0.7)\times$ more likely to form close to the edges of the plasmonic waveguides. By characterizing individual emitters we confirm their single-photon character via the observation of antibunching of the signal ($g^{(2)}(0) = 0.42$) and demonstrate that specific emitters couple to the modes of the proximal plasmonic waveguide. Time-resolved measurements performed on emitters close to, and far away from the plasmonic nanostructures indicate that Purcell factors up to $15 \pm 3$ occur, depending on the precise location of the quantum emitter relative to the tightly confined plasmonic mode. Measurement of the point spread function of five quantum emitters relative to the waveguide with <50nm precision are compared with numerical simulations to demonstrate potential for higher increases of the coupling efficiency for ideally positioned emitters. The integration of such strain-induced quantum emitters with deterministic plasmonic routing is a step toward deep-subwavelength on-chip single quantum light sources.

cond-mat.mes-hall↗