arXiv subjects

Oliver Preuß

Publications and source records attributed to Oliver Preuß.

9 recordsLinked to original sources

arXiv2026

Influence of dislocation density on the tribological response in oxides: case study on SrTiO3

Most ceramics suffer from brittle surface damage and cracking when small particles slide across the surface under low load. Microscratching tests are a useful technique to mimic this loading scenario while retaining the material's deformation history; however, the impact of pre-seeded dislocations, which can significantly facilitate plastic deformation, has not been explored in ceramics. Here, the influence of mechanically seeded dislocations on the microscratching response of oxides is investigated using a model perovskite, SrTiO3. First, various dislocation densities over four orders of magnitude are introduced via room-temperature cyclic Brinell indenter scratching. Subsequently, load-ramped microscratching tests are performed within the pristine and dislocation-seeded regions using a nominally 30 μm spherical diamond tip. On the reference pristine surface, we observe a clear transition from elastic to elasto-plastic deformation, followed by median/radial cracking at higher loads. In contrast, pre-seeded dislocations, accompanied by residual compressive stresses, suppress elastic deformation and lead to median/radial crack shortening and subsequent transition to a partial cone crack. The subsurface cracks are characterized by 3D Nano-CT. The changes in crack geometry, with and without dislocations, were described using the Lawn-Evans-Marshall and Lawn-Wiederhorn-Roberts models. These findings provide direct evidence of dislocation-regulated near-surface damage tolerance, with general applicability to other plastically deformable oxides.

cond-mat.mtrl-sci↗

arXiv2026

MO-ELA: Rigorously Expanding Exploratory Landscape Features for Automated Algorithm Selection in Continuous Multi-Objective Optimisation

Automated Algorithm Selection (AAS) is a popular meta-algorithmic approach and has demonstrated to work well for single-objective optimisation in combination with exploratory landscape features (ELA), i.e., (numerical) descriptive features derived from sampling the black-box (continuous) optimisation problem. In contrast to the abundance of features that describe single-objective optimisation problems, only a few features have been proposed for multi-objective optimisation so far. Building upon recent work on exploratory landscape features for box-constrained continuous multi-objective optimization problems, we propose a novel and complementary set of additional features (MO-ELA). These features are based on a random sample of points considering both the decision and objective space. The features are divided into 5 feature groups depending on how they are being calculated: non-dominated-sorting, descriptive statistics, principal component analysis, graph structures and gradient information. An AAS study conducted on well-established multi-objective benchmarks demonstrates that the proposed features contribute to successfully distinguishing between algorithm performance and thus adequately capture problem hardness resulting in models that come very close to the virtual best solver. After feature selection, the newly proposed features are frequently among the top contributors, underscoring their value in algorithm selection and problem characterisation.

cs.NE↗

arXiv2025

Scale-bridging dislocation plasticity in MgO at room temperature

Dislocations in ceramics have recently gained renewed research interest, in contrast to the traditional belief that ceramics are inherently brittle. Understanding dislocation mechanics in representative oxides is beneficial for effective dislocation engineering. Here, we use MgO single crystals with mechanically seeded dislocation densities from about 10 to the power of 12 to about 10 to the power of 15 per square meter to investigate the mechanical behavior such as yield and fracture. Micro-pillar compression tests reveal a dislocation density dependent yield strength, mediated by the varying dominating dislocation mechanisms from nucleation to multiplication/motion. In situ TEM compression measurements highlight the dislocation-seeded samples can achieve a much-improved compressive plastic strain beyond about 70%, with a high yield strength of about 2.35 GPa (diameter of about 400 nm), indicating size effect. Complementary bulk compression tests, along with digital image correlation (DIC), demonstrate a consistent dislocation-mediated deformation and a notable size effect, with bulk samples exhibiting much reduced yield strength (about 120 MPa) compared to the nano-/micro-pillars. Using three-dimensional Discrete Dislocation Dynamics (3D-DDD) simulation, we further qualitatively analyze the collective dislocation activities (slip events) and work hardening during compression. This study provides new insights into dislocation-mediated plasticity in MgO, across different length scales, by systematically tuning dislocation density.

cond-mat.mtrl-sci↗

arXiv2025

Dislocation response to electric fields in strontium titanate: A mesoscale indentation study

Dislocations in perovskite oxides have drawn increasing research interest due to their potential of tuning functional properties of electroceramics. Open questions remain regarding the behavior of dislocations concerning their stability under strong externally applied electric fields. In this study, we investigate the dielectric breakdown strength of nominally undoped SrTiO3 crystals after the introduction of high-density dislocations. The dislocation-rich samples are prepared using the Brinell scratching method, and they consistently exhibit lower dielectric breakdown strength as well as a larger scatter in the breakdown probability. We also study the impact of electric field on the introduction and movement of dislocations in SrTiO3 crystals using Brinell indentation coupled with an electric field of 2 kV/mm. No changes on the dislocation plastic zone size, depth, and dislocation distribution are observed under this electric field. Based on the charge state of the dislocations in SrTiO3 as well as the electrical and thermal conductivity modified by dislocations, we discuss the forces induced by the electric field to act on the dislocations to underline the possible mechanisms for such dislocation behavior.

cond-mat.mtrl-sci↗

arXiv2025

Stable crack propagation in dislocation-engineered oxide visualized by double cleavage drilled compression test

Understanding crack tip - dislocation interaction is critical for improving the fracture resistance of semi-brittle materials like room-temperature plastically deformable ceramics. Here, we use a modified double cleavage drilled compression (DCDC) specimen geometry, which facilitates stable crack propagation, to achieve in situ observation of crack tip - dislocation interaction. MgO specimens, furnished with dislocation-rich barriers, were employed to study how dislocations influence crack propagation. Crack progression was clearly observed to decelerate within dislocation-rich regions, slowing to 15% of its velocity as compared to the pristine crystal. Upon exiting these regions, cracks reaccelerated until reaching the next dislocation-rich barrier. Coupled phase field and crystal plasticity modeling replicates the experimental observations and provides mechanistic insight into crack tip - dislocation interactions. The aligned experiment and simulation results underscore the robustness of the technique and its potential to inform the design of more fracture-resistant ceramics via dislocations.

cond-mat.mtrl-sci↗

arXiv2025

Dislocation-enhanced piezoelectric catalysis of KNbO3 crystal for water splitting

Dislocations in oxides with ionic/covalent bonding hold the potential of harnessing versatile functionalities. Here, high-density dislocations in a large plastic zone in potassium niobate (KNbO3) crystals are mechanically introduced by room-temperature cyclic scratching to enhance piezocatalytic hydrogen production. Unlike conventional energy-intensive, time-consuming deformation at high temperature, this approach merits efficient dislocation engineering. These dislocations induce local strain and modify the electronic environment, thereby improving surface reactivity and charge separation, which are critical for piezocatalysis. This proof-of-concept offers a practical and sustainable alternative for functionalizing piezoelectric ceramics. Our findings demonstrate that surface-engineered dislocations can effectively improve the piezocatalysis, paving the way for efficient and scalable piezocatalytic applications.

cond-mat.mtrl-sci↗

arXiv2025

Room-temperature dislocation plasticity in ceramics: Methods, Materials, and Mechanisms

Dislocation-mediated plastic deformation in ceramic materials has sparked renewed research interest due to the technological potential of dislocations. Despite the long research history of dislocations as one-dimensional lattice defects in crystalline solids, the understanding of plastically deformable ceramics at room temperature seems lacking. The conventional view holds that ceramics are brittle, difficult to deform at room temperature and exhibit no dislocation plasticity except in small-scale testing such as nanoindentation and nano-micropillar compression. In this review, we attempt to gather the evidence and reports of room-temperature dislocation plasticity in ceramics beyond the nano-/microscale, with a focus on meso-macroscale plasticity. First, we present a mechanical deformation toolbox covering various experimental approaches for assessing the dislocation plasticity, with a focus on bulk plasticity. Second, we provide a materials toolbox listing 44 ceramic compounds that have been reported to exhibit dislocation plasticity at meso-/macroscale under ambient conditions. Finally, we discuss the mechanics of dislocations in ceramics, aiming to establish a foundation for predicting and discovering additional ceramics capable of room-temperature plastic deformation, thereby advancing the development of prospective dislocation-based technologies.

cond-mat.mtrl-sci↗

arXiv2024

Damage-tolerant oxides by imprint of an ultra-high dislocation density

Dislocations in ductile ceramics offer the potential for robust mechanical performance while unlocking versatile functional properties. Previous studies have been limited by small volumes with dislocations and/or low dislocation densities in ceramics. Here, we use Brinell ball scratching to create crack-free, large plastic zones, offering a simple and effective method for dislocation engineering at room temperature. Using MgO, we tailor high dislocation densities up to ~10^15 m^-2. We characterize the plastic zones by chemical etching, electron channeling contrast imaging, and scanning transmission electron microscopy, and further demonstrate that crack initiation and propagation in the plastic zones with high-density dislocations can be completely suppressed. The residual stresses in the plastic zones were analyzed using high-resolution electron backscatter diffraction. With the residual stress being subsequently relieved via thermal annealing while retaining the high-density dislocations, we observe the cracks are no longer completely suppressed, but the pure toughening effect of the dislocations remains evident.

cond-mat.mtrl-sci↗

arXiv2024

Room-temperature bulk plasticity and tunable dislocation densities in KTaO3

We report room-temperature bulk plasticity mediated by dislocations in single-crystal cubic KTaO3, contrasting the conventional knowledge that single-crystal KTaO3 is susceptible to brittle cleavage. A mechanics-based combinatorial experimental approach using cyclic Brinell indentation, scratching, and uniaxial bulk compression consistently demonstrates room-temperature dislocation plasticity in KTaO3 from the mesoscale to the macroscale. This approach also delivers tunable dislocation densities and plastic zone sizes. Scanning transmission electron microscopy analysis underpins the activated slip system to be <110>{1-10}. Given the growing significance of KTaO3 as an emerging electronic oxide and the increasing interest in dislocations for tuning physical properties of oxides, our findings are expected to trigger synergistic research interest in KTaO3 with dislocations.

cond-mat.mtrl-sci↗