arXiv subjects

Olivier Bourgeois

Publications and source records attributed to Olivier Bourgeois.

At least 19 recordsLinked to original sources

arXiv2025

Microsecond-Pulsed Nanocalorimetry: A Scalable Approach for Ultrasensitive Heat Capacity Measurements

We introduce a nanocalorimetric technique based on microsecond-pulsed heating (μs-PHnC) that enables high-sensitivity, quasi-isothermal heat capacity measurements on nanoscale samples. Such resolution is critical for exploring thermodynamic signatures in low-dimensional materials, where conventional techniques fall short. By confining thermal excitation to microsecond timescales, this approach minimizes lateral heat diffusion, reduces heat capacity addenda to below 10^{-9} J K^{-1}, and achieves noise densities as low as 75 pJ K^{-1} Hz^{-1/2} mm^{-2}, unlocking precise thermodynamic characterization of subnanogram samples in areas as small as 30 x 30 μm^{2}. The method delivers exceptional temperature homogeneity, as demonstrated by resolving sharp phase transitions, such as the antiferromagnetic transition in ultrathin CoO films, with unprecedented clarity. Its quasi-static operation is inherently compatible with external stimuli, including magnetic and electric fields, thereby expanding its utility for in-operando thermodynamic studies. This advancement establishes a robust and scalable platform for probing thermal phenomena in nanostructured and low-dimensional materials, significantly broadening the scope of nanocalorimetry.

cond-mat.mtrl-sci↗

arXiv2024

Thermal conductivity reduction due to phonon geometrical scattering in nano-engineered epitaxial germanium

Nano-engineering crystalline materials can be used to tailor their thermal properties. By adding new nanoscale phonon scattering centers and controlling their size, one can effectively decrease the phonon mean free path and hence the thermal conductivity of a fully crystalline material. In this letter, we use the 3$ω$ method in the temperature range of 100-300 K to experimentally report on the more than threefold reduction of the thermal conductivity of an epitaxially-grown crystalline germanium thin film with embedded polydispersed crystalline \ch{Ge3Mn5} nano-inclusions with diameters ranging from 5 to 25~nm. A detailed analysis of the structure of the thin film coupled with Monte Carlo simulations of phonon transport highlight the role of the nano-inclusions volume fraction in the reduction of the phononic contribution to the thermal conductivity, in particular its temperature dependence, leading to a phonon mean free path that is set by geometrical constraints.

cond-mat.mes-hall↗

arXiv2023

On the link between mechanics and thermal properties: mechanothermics

We report on the theoretical derivation of macroscopic thermal properties (specific heat, thermal conductivity) of an electrically insulating rod connected to two reservoirs, from the linear superposition of its mechanical mode Brownian motions. The calculation is performed for a weak thermal gradient, in the classical limit (high temperature). The development is kept basic as far as geometry and experimental conditions are concerned, enabling an almost fully analytic treatment. In the modeling, each of the modes is subject to a specific Langevin force, which enables to produce the required temperature profile along the rod. The theory is predictive: the temperature gradient (and therefore energy transport) is linked to motion amplitude cross-correlations between nearby mechanical modes. This arises because energy transport is actually mediated by mixing between the modal waves, and not by the modes themselves. This result can be tested on experiments, and shall extend the concepts underlying equipartition and fluctuation-dissipation theorems. The theory links intimately the macroscopic size of the clamping region where the mixing occurs to the microscopic lengthscale of the problem at hand: the phonon mean-free-path. This clamping region, which is key, has received recently a renewed attention in the field of nanomechanics with topical works on "phonon shields" and "soft clamping". We believe that our work should impact the domain of thermal transport in nanostructures, with future developments of the theory toward the quantum regime.

cond-mat.mes-hall↗

arXiv2023

Nanomechanical damping via electron-assisted relaxation of two-level systems

We report on measurements of dissipation and frequency noise at millikelvin temperatures of nanomechanical devices covered with aluminum. A clear excess damping is observed after switching the metallic layer from superconducting to the normal state with a magnetic field. Beyond the standard model of internal tunneling systems coupled to the phonon bath, here we consider the relaxation to the conduction electrons together with the nature of the mechanical dispersion laws for stressed/unstressed devices. With these key ingredients, a model describing the relaxation of two-level systems inside the structure due to interactions with electrons and phonons with well separated timescales captures the data. In addition, we measure an excess 1/f-type frequency noise in the normal state, which further emphasizes the impact of conduction electrons.

cond-mat.mes-hall↗

arXiv2022

Specific Heat of Thin Phonon Cavities at Low Temperature: Very High Values Revealed by ZeptoJoule Calorimetry

Specific heat of phonon cavities is investigated in order to analyse the effect of phonon confinement on thermodynamic properties. The specific heat of free standing very thin SiN membranes in the low dimensional limit is measured down to very low temperatures (from 6~K to 50~mK). In the whole temperature range, we measured an excess of specific heat orders of magnitude bigger than the typical value observed in amorphous solids. Below 1~K, a cross-over in $c_p$ to a lower power law is seen, and the value of specific heat of thinner membranes becomes larger than that of thicker ones demonstrating a significant contribution coming from the surface. We show that this high value of the specific heat cannot be explained by the sole contribution of 2D phonon modes (Lamb waves). The excess specific heat, being thickness dependent, could come from tunneling two level systems (TLS) that form in low density regions of amorphous solids located on the surfaces. We also show that the specific heat is strongly tuned by the internal stress of the membrane by orders of magnitude, giving unprecedentedly high values, making low stress SiN very efficient for energy storage at very low temperature.

cond-mat.mes-hall↗

arXiv2021

Inducing micromechanical motion by optical excitation of a single quantum dot

Hybrid quantum optomechanical systems offer an interface between a single two-level system and a macroscopical mechanical degree of freedom. In this work, we build a hybrid system made of a vibrating microwire coupled to a single semiconductor quantum dot (QD) via material strain. It was shown a few years ago, that the QD excitonic transition energy can thus be modulated by the microwire motion. We demonstrate here the reverse effect, whereby the wire is set in motion by the resonant drive of a single QD exciton with a laser modulated at the mechanical frequency. The resulting driving force is found to be almost 3 orders of magnitude larger than radiation pressure. From a fundamental aspect, this state dependent force offers a convenient strategy to map the QD quantum state onto a mechanical degree of freedom.

cond-mat.mes-hall↗

arXiv2019

Niobium nitride thin films for very low temperature resistive thermometry

We investigate thin film resistive thermometry based on metal-to-insulator-transition (niobium nitride) materials down to very low temperature. The variation of the NbN thermometer resistance have been calibrated versus temperature and magnetic field. High sensitivity in tempertaure variation detection is demonstrated through efficient temperature coefficient of resistance. The nitrogen content of the niobium nitride thin films can be tuned to adjust the optimal working temperature range. In the present experiment, we show the versatility of the NbN thin film technology through applications in very different low temperature use-cases. We demonstrate that thin film resistive thermometry can be extended to temperatures below 30 mK with low electrical impedance.

physics.app-ph↗

arXiv2018

Network of thermoelectric nanogenerators for low power energy harvesting

We report the design, elaboration and measurements of an innovative planar thermoelectric (TE) devices made of a large array of small mechanically suspended nanogenerators (nanoTEG). The miniaturized TE generators based on SiN membranes are arranged in series and/or in parallel depending on the expected final resistance adapted to the one of the load. The microstructuration allows, at the same time, a high thermal insulation of the membrane from the silicon frame and high thermal coupling to its environment (surrounding air, radiations). We show a ratio of 60% between the measured effective temperature of the membrane, (and hence of the TE junctions), and the available temperature of the heat source (air). The thermal gradient generated across the TE junction reaches a value as high as 60 kelvin per mm. Energy harvesting with this planar TE module is demonstrated through the collected voltage on the TE junctions when a temperature gradient is applied, showing a harvested power on the order of 0.3 $μ$Watt for a 1 cm 2 chip for an effective temperature gradient of 10 K. The optimization of nanoTEGs performances will increase the power harvested significantly and permit to send a signal by a regular communication protocol and feed basic functions like temperature measurement or airflow sensing.

physics.app-ph↗

arXiv2018

Measurement of anisotropic thermal conductivity of a dense forest of nanowires using the 3$ω$ method

The 3$ω$ method is a dynamic measurement technique developed for determining the thermal conductivity of thin films or semi-infinite bulk materials. A simplified model is often applied to deduce the thermal conductivity from the slope of the real part of the ac temperature amplitude as a function of the logarithm of frequency, which in-turn brings a limitation on the kind of samples under observation. In this work, we have measured the thermal conductivity of a forest of nanowires embedded in nanoporous alumina membranes using the 3$ω$ method. An analytical solution of 2D heat conduction is then used to model the multilayer system, considering the anisotropic thermal properties of the different layers, substrate thermal conductivity and their thicknesses. Data treatment is performed by fitting the experimental results with the 2D model on two different sets of nanowires (silicon and BiSbTe) embedded in the matrix of nanoporous alumina template, having thermal conductivities that differ by at least one order of magnitude. These experimental results show that this method extends the applicability of the 3$ω$ technique to more complex systems having anisotropic thermal properties.

physics.app-ph↗

arXiv2018

Measuring frequency fluctuations in nonlinear nanomechanical resonators

Advances in nanomechanics within recent years have demonstrated an always expanding range of devices, from top-down structures to appealing bottom-up MoS$_2$ and graphene membranes, used for both sensing and component-oriented applications. One of the main concerns in all of these devices is frequency noise, which ultimately limits their applicability. This issue has attracted a lot of attention recently, and the origin of this noise remains elusive up to date. In this Letter we present a very simple technique to measure frequency noise in nonlinear mechanical devices, based on the presence of bistability. It is illustrated on silicon-nitride high-stress doubly-clamped beams, in a cryogenic environment. We report on the same $T/f$ dependence of the frequency noise power spectra as reported in the literature. But we also find unexpected {\it damping fluctuations}, amplified in the vicinity of the bifurcation points; this effect is clearly distinct from already reported nonlinear dephasing, and poses a fundamental limit on the measurement of bifurcation frequencies. The technique is further applied to the measurement of frequency noise as a function of mode number, within the same device. The relative frequency noise for the fundamental flexure $δf/f_0$ lies in the range $0.5 - 0.01~$ppm (consistent with literature for cryogenic MHz devices), and decreases with mode number in the range studied. The technique can be applied to {\it any types} of nano-mechanical structures, enabling progresses towards the understanding of intrinsic sources of noise in these devices.

cond-mat.mes-hall↗

arXiv2017

Classical decoherence in a nanomechanical resonator

Decoherence is an essential mechanism that defines the boundary between classical and quantum behaviours, while imposing technological bounds for quantum devices. Little is known about quantum coherence of mechanical systems, as opposed to electromagnetic degrees of freedom. But decoherence can also be thought of in a purely classical context, as the loss of phase coherence in the classical phase space. Indeed the bridge between quantum and classical physics is under intense investigation, using in particular classical nanomechanical analogues of quantum phenomena. In the present work, by separating pure dephasing from dissipation, we quantitatively model the classical decoherence of a mechanical resonator: through the experimental control of frequency fluctuations, we engineer artificial dephasing. Building on the fruitful analogy introduced between spins/quantum bits and nanomechanical modes, we report on the methods available to define pure dephasing in these systems, while demonstrating the intrinsic almost-ideal properties of silicon-nitride beams. These experimental and theoretical results, at the boundary between classical nanomechanics and quantum information fields, are prerequisite in the understanding of decoherence processes in mechanical devices, both classical and quantum.

cond-mat.mes-hall↗

arXiv2017

Non-linear Frequency Transduction of Nano-mechanical Brownian Motion

We report on experiments addressing the non-linear interaction between a nano-mechanical mode and position fluctuations. The Duffing non-linearity transduces the Brownian motion of the mode, and of other non-linearly coupled ones, into frequency noise. This mechanism, ubiquitous to all weakly-nonlinear resonators thermalized to a bath, results in a phase diffusion process altering the motion: two limit behaviors appear, analogous to motional narrowing and inhomogeneous broadening in NMR. Their crossover is found to depend non-trivially on the ratio of the frequency noise correlation time to its magnitude. Our measurements obtained over an unprecedented range covering the two limits match the theory of Y. Zhang and M. I. Dykman, Phys. Rev. B 92, 165419 (2015), with no free parameters. We finally discuss the fundamental bound on frequency resolution set by this mechanism, which is not marginal for bottom-up nanostructures.

cond-mat.mes-hall↗

arXiv2017

The Universality of Thermal Transport in Amorphous Nanowires at Low Temperatures

Thermal transport properties of amorphous materials at low temperatures are governed by the interaction between phonons and localized excitations referred to as tunneling two level systems (TLS). The temperature variation of the thermal conductivity of these amorphous materials is considered as universal and is characterized by a quadratic power law. This is well described by the phenomenological TLS model even though its microscopic explanation is still elusive. Here, by scaling down to the nanometer scale amorphous systems much below the bulk phonon-TLS mean free path, we probed the robustness of that model in restricted geometry systems. Using very sensitive thermal conductance measurements, we demonstrate that the temperature dependence of the thermal conductance of silicon nitride nanostructures remains mostly quadratic independently of the nanowire section. It is not following the cubic power law in temperature as expected in a Casimir-Ziman regime of boundary limited thermal transport. This shows a thermal transport counter intuitively dominated by phonon-TLS interactions and not by phonon-boundary scattering in the nanowires. This could be ascribed to an unexpected high density of TLS on the surfaces which still dominates the phonon diffusion processes at low temperatures and explains why the universal quadratic temperature dependence of thermal conductance still holds for amorphous nanowires.

cond-mat.mes-hall↗

arXiv2017

Quantum criticality at the superconductor to insulator transition revealed by specific heat measurements

The superconductor-insulator transition (SIT) is considered an excellent example of a quantum phase transition which is driven by quantum fluctuations at zero temperature. The quantum critical point is characterized by a diverging correlation length and a vanishing energy scale. Low energy fluctuations near quantum criticality may be experimentally detected by specific heat, $c_{\rm p}$, measurements. Here, we use a unique highly sensitive experiment to measure $c_{\rm p}$ of two-dimensional granular Pb films through the SIT. The specific heat shows the usual jump at the mean field superconducting transition temperature $T_{\rm c}^{\rm {mf}}$ marking the onset of Cooper pairs formation. As the film thickness is tuned toward the SIT, $T_{\rm c}^{\rm {mf}}$ is relatively unchanged, while the magnitude of the jump and low temperature specific heat increase significantly. This behaviour is taken as the thermodynamic fingerprint of quantum criticality in the vicinity of a quantum phase transition.

cond-mat.supr-con↗

arXiv2016

Reduction of phonon mean free path: from low temperature physics to room temperature applications in thermoelectricity

It has been proposed for a long time now that the reduction of the thermal conductivity by reducing the phonon mean free path is one of the best way to improve the current performance of thermoelectrics. By measuring the thermal conductance and thermal conductivity of nanowires and thin films, we show different ways of increasing the phonon scattering from low temperature up to room temperature experiments. It is shown that playing with the geometry (constriction, periodic structures, nano-inclusions), from the ballistic to the diffusive limit, the phonon thermal transport can be severely altered in single crystalline semiconducting structures; the phonon mean free path being in consequence reduced. The diverse implications on thermoelectric properties will be eventually discussed.

cond-mat.mes-hall↗

arXiv2015

Specific heat measurement of thin suspended SiN membrane from 8 K to 300 K using the 3$ω$-V$\ddot{o}$lklein method

We present a specific heat measurement technique adapted to thin or very thin suspended membranes from low temperature (8 K) to 300 K. The presented device allows the measurement of the heat capacity of a 70 ng silicon nitride membrane (50 or 100 nm thick), corresponding to a heat capacity of 1.4x10$^{-10}$ J/K at 8 K and 5.1x10$^{-8}$ J/K at 300 K. Measurements are performed using the 3$ω$ method coupled to the V$\ddot{o}$lklein geometry. This configuration allows the measurement of both specific heat and thermal conductivity within the same experiment. A transducer (heater/thermometer) is used to create an oscillation of the heat flux on the membrane; the voltage oscillation appearing at the third harmonic which contains the thermal information is measured using a Wheatstone bridge set-up. The heat capacity measurement is performed by measuring the variation of the 3$ω$ voltage over a wide frequency range and by fitting the experimental data using a thermal model adapted to the heat transfer across the membrane. The experimental data are compared to a regular Debye model; the specific heat exhibits features commonly seen for glasses at low temperature.

cond-mat.mes-hall↗

arXiv2015

Scaling laws for the bifurcation-escape rate in a nanomechanical resonator

We report on experimental and theoretical studies of the fluctuation-induced escape time from a metastable state of a nanomechanical Duffing resonator in cryogenic environment. By tuning in situ the non-linear coefficient $γ$ we could explore a wide range of the parameter space around the bifurcation point, where the metastable state becomes unstable. We measured in a relaxation process the distribution of the escape times. We have been able to verify its exponential distribution and extract the escape rate $Γ$. We investigated the scaling of $Γ$ with respect to the distance to the bifurcation point and $γ$, finding an unprecedented quantitative agreement with the theoretical description of the stochastic problem. Simple power scaling laws turn out to hold in a large region of the parameter's space, as anticipated by recent theoretical predictions. These unique findings, implemented in a model dynamical system, are relevant to all systems experiencing under-damped saddle-node bifurcation.

cond-mat.mes-hall↗

arXiv2015

The thermal conductivity of silicon nitride membranes is not sensitive to stress

We have measured the thermal properties of suspended membranes from 10 K to 300 K for two amplitudes of internal stress (about 0.1 GPa and 1 GPa) and for two different thicknesses (50 nm and 100 nm). The use of the original 3 ω-Volklein method has allowed the extraction of both the specific heat and the thermal conductivity of each SiN membrane over a wide temperature range. The mechanical properties of the same substrates have been measured at helium temperatures using nanomechanical techniques. Our measurements show that the thermal transport in freestanding SiN membranes is not affected by the presence of internal stress. Consistently, mechanical dissipation is also unaffected even though Qs increase with increasing tensile stress. We thus demonstrate that the theory developed by Wu and Yu [Phys. Rev. B 84, 174109 (2011)] does not apply to this amorphous material in this stress range. On the other hand, our results can be viewed as a natural consequence of the "dissipation dilution" argument [Y. L. Huang and P. R. Saulson, Rev. Sci. Instrum. 69, 544 (1998)] which has been introduced in the context of mechanical damping.

cond-mat.mes-hall↗