arXiv subjects

Olivier Dupuis

Publications and source records attributed to Olivier Dupuis.

9 recordsLinked to original sources

arXiv2026

The MICADO first-light imager for the ELT: first steps of the SCAO system MAIT

MICADO is the ELT first light instrument, an imager working at the diffraction limit of the telescope thanks to two adaptive optics (AO) modes: a single conjugate one (SCAO), available at the instrument first light and developed by the MICADO consortium, and a multi conjugate one (MCAO), developed by the MORFEO consortium. Although the project final design review process is about to be completed, the review board and ESO acknowledged that "the review of the final design can be considered complete for the majority of the MICADO sub-systems" and agreed that MICADO can start manufacturing. For the MICADO SCAO module, we have started the manufacturing of several parts: the majority of the SCAO optics and of the SCAO mechanics, the real-time computer software and the instrument control software. This manufacturing is ordered in several steps to allow the progressive integration of a first full AO close loop with the final SCAO parts. In this contribution, we will focus on the first two steps: on our AO Sésame bench and the so-called "beta flat configuration". We will present the status of this manufacturing and the first results obtained.

astro-ph.IM↗

arXiv2026

The MICADO first light imager for the ELT: the SCAO module AIT in France, from the beta flat configuration towards the flat and final configurations

MICADO is the designated ELT first light instrument, a near-infrared imager working at the diffraction limit of the telescope thanks to a SCAO and an MCAO mode. Since summer 2024, MICADO is in its AIT phase and all MICADO partners are currently integrating their subsystems. The MICADO SCAO module will follow three successive AIT phases in France: the beta flat configuration, the flat configuration and the final configuration. In this contribution I will first present the progress made in the AIT of the beta flat configuration and its closed loop results. I will then present the performed and on-going tasks for the flat and final configurations (manufacturing, delivery and integration of several SCAO subsystems and pieces of software) and the results obtained so far in the flat configuration. I will then conclude with the expected following steps of the SCAO module AIT in Garching.

astro-ph.IM↗

arXiv2026

Pollux test bench: from NUV to FUV polarimetric measurements

Pollux is a high-resolution spectropolarimeter proposed by an European consortium for HWO. The current design of Pollux features four spectropolarimetric channels, three of which are in the UV range. For the near-UV (NUV) [236-472 nm] and mid-UV (MUV) [118-236 nm] channels, the polarimeters consist of waveplates and prisms made of MgF2, a birefringent material. However, no such birefringent material can be used for the far-UV (FUV) channel [100-123 nm]. Therefore, the polarimeter for this FUV channel is composed solely of mirrors in an innovative assembly. In this talk, we aim to detail the architecture of the test bench that will allow us to validate the performance of these different polarimeters, as part of the HWO GOMaP. Given that we are working in the vacuum ultraviolet (VUV) range, the test bench operates in a vacuum chamber in a clean room. We will discuss the adaptable architecture of the bench based on wavelength and the measurement methodology that we will implement to test if the polarimeters achieve the precision of $10^{-3}$ required for the Pollux instrument. With this test bench, we will successfully increase the Technology Readiness Level (TRL) of UV spectropolarimeters and, for the first time, develop a means to test FUV spectropolarimetry.

astro-ph.IM↗

arXiv2025

CASSTOR: a scientific and technology nanosatellite demonstrator for UV spectropolarimetry

In the context of the development of several space mission projects for UV spectropolarimetry at high resolution and over a wide UV wavelength range, such as Arago, Polstar, and Pollux onboard the Habitable Worlds Observatory, we are studying and developing the UV nanosatellite CASSTOR to obtain the very first UV spectropolarimetric observations of hot stars and test several new technologies, in particular a UV polarimeter and a Fine Guiding System. In this paper, we present the work and outcome of the Phase 0 study of CASSTOR.

astro-ph.IM↗

arXiv2024

The MICADO first light imager for the ELT: Testing the Lyot coronograph prototypes

MICADO, the European Extremely Large Telescope first light imager will feature a dedicated high contrast imaging mode specifically designed for observing and characterizing exoplanets and circumstellar disks. Its improved sensitivity and angular resolution, compared to existing instruments will significantly increase our knowledge on these planetary systems. MICADO will include three classical Lyot coronagraphs, one vector phase-apodized pupil plane (vAPP) and two sparse apertures. After rapidly describing the final design of MICADO high contrast mode, we will describe the current state of development of the coronographic components and the testing of the first Lyot coronagraph prototypes.

astro-ph.IM↗

arXiv2020

A Family of Phase Masks For Broadband Coronagraphy Example of the Wrapped Vortex Phase Mask Theory and Laboratory demonstration

Future instruments need efficient coronagraphs over large spectral ranges to enable broadband imaging or spectral characterization of exoplanets 1e8 fainter than their star. Several solutions were proposed. Pupil apodizers can attenuate the star intensity by a 1e10 factor but they transmit a few percents of the planet light only. Cascades of phase/amplitude masks can both attenuate the starlight and transmit most of the planet light but the number of optics to align is not a practical solution for an instrument. Finally, vector phase masks can be used to detect faint sources close to bright stars but they require the use of high quality circular polarizers and as for the previous solution, this leads to a complex instrument with numerous optics to align and stabilize. We propose simple coronagraphs that need one scalar phase mask and one binary Lyot stop only providing high transmission for the planet light (>50%) and high attenuation of the starlight over a large spectral bandpass (~30%) and a 360 degree field-of-view. From mathematical considerations, we find a family of 2D-phase masks optimized for an unobscured pupil. One mask is an azimuthal wrapped vortex phase ramp. We probe its coronagraphic performance using numerical simulations and laboratory tests. From numerical simulations, we predict the wrapped vortex can attenuate the peak of the star image by a factor of 1e4 over a 29% bandpass and 1e5 over a 18% bandpass with transmission of more than 50% of the planet flux at ~4 lambda/D. We confirm these predictions in laboratory in visible light between 550nm and 870nm. We also obtain laboratory dark hole images in which exoplanets with fluxes that are 3e-8 times the host star flux could be detected at 3sigma. Taking advantage of a new technology for etching continuous 2D-functions, new type of masks can be easily manufactured opening new possibilities for broadband coronagraphy.

astro-ph.IM↗

arXiv2019

Active minimization of non-common path aberrations in long-exposure imaging of exoplanetary systems

Context. Spectroscopy of exoplanets is very challenging because of the high star-planet contrast. A technical difficulty in the design of imaging instruments is the noncommon path aberrations (NCPAs) between the adaptive optics (AO) sensing and the science camera, which induce planet-resembling stellar speckles in the coronagraphic science images. In an observing sequence of several long exposures, quickly evolving NCPAs average out and leave behind an AO halo that adds photon noise to the planet detection. Static NCPA can be calibrated a posteriori using differential imaging techniques. However, NCPAs that evolve during the observing sequence do not average out and cannot be calibrated a posteriori. These quasi-static NCPAs are one of the main limitations of the current direct imaging instruments such as SPHERE, GPI, and SCExAO. Aims. Our aim is to actively minimize the quasi-static speckles induced in long-exposure images. To do so, we need to measure the quasi-static speckle field above the AO halo. Methods. The self-coherent camera (SCC) is a proven technique which measures the speckle complex field in the coronagraphic science images. It is routinely used on the THD2 bench to reach contrast levels of <10^{-8} in the range 5-12 λ/D in space-related conditions. To test the SCC in ground conditions on THD2, we optically simulated the residual aberrations measured behind the SPHERE/VLT AO system under good observing conditions. Results. We demonstrate in the laboratory that the SCC can minimize the quasi-static speckle intensity in the science images down to a limitation set by the AO halo residuals. The SCC reaches 1σ raw contrast levels below 10^{-6} in the region 5-12 λ/D at 783.25 nm in our experiments.

astro-ph.IM↗

arXiv2018

The MICADO first light imager for the ELT: overview, operation, simulation

MICADO will enable the ELT to perform diffraction limited near-infrared observations at first light. The instrument's capabilities focus on imaging (including astrometric and high contrast) as well as single object spectroscopy. This contribution looks at how requirements from the observing modes have driven the instrument design and functionality. Using examples from specific science cases, and making use of the data simulation tool, an outline is presented of what we can expect the instrument to achieve.

astro-ph.IM↗

arXiv2018

Status and performance of the THD2 bench in multi-deformable mirror configuration

The architecture of exoplanetary systems is relatively well known inward to 1 AU thanks to indirect techniques, which have allowed characterization of thousands of exoplanet orbits, masses and sometimes radii. The next step is the characterization of exoplanet atmospheres at long period, which requires direct imaging capability. While the characterization of a handful of young giant planets is feasible with dedicated instruments like SPHERE/VLT, GPI/Gemini, SCExAO/Subaru and soon with the coronagraphic capabilities aboard JWST, the spectroscopic study of mature giant planets and lower mass planets (Neptune-like, Super Earths) requires the achievement of better coronagraphic performance. While space-based coronagraph on WFIRST-AFTA might start this study at low spectroscopic resolution, dedicated projects on large space telescope and on the ELT will be required for a more complete spectroscopic study of these faint planets. To prepare these future instruments, we developed a high contrast imaging bench called THD, then THD2 for the upgraded version using multi-DM configuration. The THD2 bench is designed to test and compare coronagraphs as well as focal plane wavefront sensors and wavefront control techniques. It can simulate the beam provided by a space telescope and soon the first stage of adaptive optics behind a ground-based telescope. In this article, we describe in details the THD2 bench and give the results of a recent comparison study of the chromatic behavior for several coronagraph on the THD2.

astro-ph.IM↗