arXiv subjects

Olivier Pinel

Publications and source records attributed to Olivier Pinel.

12 recordsLinked to original sources

arXiv2020

Pointing Error Compensation For Inter-Satellite Communication Using Multi-Plane Light Conversion Spatial Demultiplexer

In this work, we study the effect of beam deviation angle at the reception side and calculate the theoretical demultiplexed collected energy for up to 15 modes, investigating the influence of the ratio between incoming beam size and fundamental HG mode's waist. We show this approach greatly enhances the collection efficiency, tolerating tip-tilt error of more than 3 times compared to a Gaussian beam alone. We also show that, depending on wait size, a trade-off between collection efficiency at small angles and maximum acceptance angle can be achieved.

physics.optics↗

arXiv2019

Fabrication and Characterization of a Mode-selective 45-Mode Spatial Multiplexer based on Multi-Plane Light Conversion

Space Division Multiplexing (SMD) is a very attractive technique for addressing the ever-growing demands in transmission capacity by enabling the use of a new parameter \textemdash\ space \textemdash\ to increase the number of channels in multi-mode fibers. One key component to build a spatially multiplexed-based optical network is a spatial multiplexer and demultiplexer combining signals from multiple single-mode fibers into as many channels in a multi-mode fiber. In this article, we report the fabrication and characterization of a pair of 45-mode spatial multiplexer and demultiplexer saturating all the modes of a standard 50~$μ$m core graded-index (OM2) multi-mode fiber. The multiplexers are based on Multi-Plane Light Conversion (MPLC), a technique that enables the control of the transverse shape of the light by multiple reflections on specifically designed phase plates. We show that by using a separable variable basis of modes, such as Hermite-Gaussian (HG) modes, we are able to drastically reduce the number of reflections hence reducing the insertion losses and modal crosstalks. The multiplexers typically show an average 4~dB insertion loss and -28~dB cross-talk across the C band. Finally, we emphasize the use of this higher-order modes multiplexer to explore the propagation properties inside multi-mode fibers and more specifically the mode group crosstalks as well as the impact of fiber bending.

physics.app-ph↗

arXiv2016

Dynamical Observations of Self-Stabilising Stationary Light

Precise control of atom-light interactions is vital to many quantum information protocols. In particular, atomic systems can be used to slow and store light to form a quantum memory. Optical storage can be achieved via stopped light, where no optical energy remains in the atoms, or as stationary light, where some optical energy remains resent during storage. In this work, we demonstrate a form of self-stabilising stationary light. From any initial state, our atom-light system evolves to a stable configuration that is devoid of coherent emission from the atoms, yet may contain bright optical excitation. This phenomenon is verified experimentally in a cloud of cold Rb87 atoms. The spinwave in our atomic cloud is imaged from the side allowing direct comparison with theoretical predictions.

quant-ph↗

arXiv2015

A mirrorless spinwave resonator

Optical resonance is central to a wide range of optical devices and techniques. In an optical cavity, the round-trip length and mirror reflectivity can be chosen to optimize the circulating optical power, linewidth, and free-spectral range (FSR) for a given application. In this paper we show how an atomic spinwave system, with no physical mirrors, can behave in a manner that is analogous to an optical cavity. We demonstrate this similarity by characterising the build-up and decay of the resonance in the time domain, and measuring the effective optical linewidth and FSR in the frequency domain. Our spinwave is generated in a 20 cm long Rb gas cell, yet it facilitates an effective FSR of 83 kHz, which would require a round-trip path of 3.6 km in a free-space optical cavity. Furthermore, the spinwave coupling is controllable enabling dynamic tuning of the effective cavity parameters.

quant-ph↗

arXiv2014

Precision measurements with photon-subtracted or photon-added Gaussian states

Photon-subtracted and photon-added Gaussian states are amongst the simplest non-Gaussian states that are experimentally available. It is generally believed that they are some of the best candidates to enhance sensitivity in parameter extraction. We derive here the quantum Cramér-Rao bound for such states and find that for large photon numbers photon-subtraction or -addition only leads to a small correction of the quantum Fisher information (QFI). On the other hand a divergence of the QFI appears for very small squeezing in the limit of vanishing photon number in the case of photon subtraction, implying an arbitrarily precise measurement with almost no light. However, at least for the standard and experimentally established preparation scheme, the decreasing success probability of the preparation in that limit exactly cancels the divergence, leading to finite sensitivity per square root of Hertz, when the duration of the preparation is taken into account.

quant-ph↗

arXiv2013

Quantum parameter estimation using general single-mode Gaussian states

We calculate the quantum Cramér--Rao bound for the sensitivity with which one or several parameters, encoded in a general single-mode Gaussian state, can be estimated. This includes in particular the interesting case of mixed Gaussian states. We apply the formula to the problems of estimating phase, purity, loss, amplitude, and squeezing. In the case of the simultaneous measurement of several parameters, we provide the full quantum Fisher information matrix. Our results unify previously known partial results, and constitute a complete solution to the problem of knowing the best possible sensitivity of measurements based on a single-mode Gaussian state.

quant-ph↗

arXiv2013

Pulse shaping with birefringent crystals: a tool for quantum metrology

A method for time differentiation based on a Babinet-Soleil-Bravais compensator is introduced. The complex transfer function of the device is measured using polarization spectral interferometry. Time differentiation of both the pulse field and pulse envelope are demonstrated over a spectral width of about 100 THz with a measured overlap with the objective mode greater than 99.8%. This pulse shaping technique is shown to be perfectly suited to time metrology at the quantum limit.

quant-ph↗

arXiv2012

Real-time distance measurement immune from atmospheric parameters using optical frequency combs

We propose a direct and real-time ranging scheme using an optical frequency combs, able to compensate optically for index of refraction variations due to atmospheric parameters. This scheme could be useful for applications requiring stringent precision over a long distance in air, a situation where dispersion becomes the main limitation. The key ingredient is the use of a mode-locked laser as a precise source for multi-wavelength interferometry in a homodyne detection scheme. By shaping temporally the local oscillator, one can directly access the desired parameter (distance) while being insensitive to fluctuations induced by parameters of the environment such as pressure, temperature, humidity and CO$_2$ content.

quant-ph↗

arXiv2012

Spatial mode storage in a gradient echo memory

Three-level atomic gradient echo memory (lambda-GEM) is a proposed candidate for efficient quantum storage and for linear optical quantum computation with time-bin multiplexing. In this paper we investigate the spatial multimode properties of a lambda-GEM system. Using a high-speed triggered CCD, we demonstrate the storage of complex spatial modes and images. We also present an in-principle demonstration of spatial multiplexing by showing selective recall of spatial elements of a stored spin wave. Using our measurements, we consider the effect of diffusion within the atomic vapour and investigate its role in spatial decoherence. Our measurements allow us to quantify the spatial distortion due to both diffusion and inhomogeneous control field scattering and compare these to theoretical models.

quant-ph↗

arXiv2011

Generation and characterization of multimode quantum frequency combs

Multimode nonclassical states of light are an essential resource in quantum computation with continuous variables, for example in cluster state computation. They can be generated either by mixing different squeezed light sources using linear optical operations, or directly in a multimode optical device. In parallel, frequency combs are perfect tools for high precision metrological applications and for quantum time transfer. Synchronously Pumped Optical Parametric Oscillators (SPOPOs) have been theoretically shown to produce multimode non-classical frequency combs. In this paper, we present the first experimental generation and characterization of a femtosecond quantum frequency comb generated by a SPOPO. In particular, we give the experimental evidence of the multimode nature of the generated quantum state and, by studying the spectral noise distribution of this state, we show that at least three nonclassical independent modes are required to describe it.

quant-ph↗

arXiv2011

Ultimate sensitivity of precision measurements with Gaussian quantum light : a multi-modal approach

Multimode Gaussian quantum light, which includes multimode squeezed and multipartite quadrature entangled light, is a very general and powerful quantum resource with promising applications in quantum information processing and metrology. In this paper, we determine the ultimate sensitivity in the estimation of any parameter when the information about this parameter is encoded in such light, irrespective of the information extraction protocol used in the estimation and of the measured observable. In addition we show that an appropriate homodyne detection scheme allows us to reach this ultimate sensitivity. We show that, for a given set of available quantum resources, the most economical way to maximize the sensitivity is to put the most squeezed state available in a well-de ned light mode. This implies that it is not possible to take advantage of the existence of squeezed fluctuations in other modes, nor of quantum correlations and entanglement between diff erent modes.

quant-ph↗

arXiv2010

General Cramér-Rao bound for parameter estimation using Gaussian multimode quantum resources

Multimode Gaussian quantum light, including multimode squeezed and/or multipartite quadrature entangled light, is a very general and powerful quantum resource with promising applications to quantum information processing and metrology involving continuous variables. In this paper, we determine the ultimate sensitivity in the estimation of any parameter when the information about this parameter is encoded in such Gaussian light, irrespective of the exact information extraction protocol used in the estimation. We then show that, for a given set of available quantum resources, the most economical way to maximize the sensitivity is to put the most squeezed state available in a well-defined light mode. This implies that it is not possible to take advantage of the existence of squeezed fluctuations in other modes, nor of quantum correlations and entanglement between different modes. We show that an appropriate homodyne detection scheme allows us to reach this Cramr-Rao bound. We apply finally these considerations to the problem of optimal phase estimation using interferometric techniques.

quant-ph↗