arXiv subjects

Olle Heinonen

Publications and source records attributed to Olle Heinonen.

At least 19 recordsLinked to original sources

arXiv2023

DFT+U and Quantum Monte Carlo study of electronic and optical properties of AgNiO$_2$ and AgNi$_{1-x}$Co$_{x}$O$_2$ delafossite

As the only semimetallic $d^{10}$-based delafossite, AgNiO$_2$ has received a great deal of attention due to both its unique semimetallicity and its antiferromagnetism in the NiO$_2$ layer that is coupled with a lattice distortion. In contrast, other delafossites such as AgCoO$_2$ are insulating. Here we study how the electronic structure of AgNi$_{1-x}$Co$_{x}$O$_2$ alloys vary with Ni/Co concentration, in order to investigate the electronic properties and phase stability of the intermetallics. While the electronic and magnetic structure of delafossites have been studied using Density Functional Theory (DFT), earlier studies have not included corrections for strong on-site Coulomb interactions. In order to treat these interactions accurately, in this study we use Quantum Monte Carlo (QMC) simulations to obtain accurate estimates for the electronic and magnetic properties of AgNiO$_2$. By comparison to DFT results we show that these electron correlations are critical to account for. We show that Co doping on the magnetic Ni sites results in a metal-insulator transition near $x\sim 0.33$, and reentrant behavior near $x\sim 0.66$

cond-mat.mtrl-sci↗

arXiv2023

Manipulating chiral-spin transport with ferroelectric polarization

A collective excitation of the spin structure in a magnetic insulator can transmit spin-angular momentum with negligible dissipation. This quantum of a spin wave, introduced more than nine decades ago, has always been manipulated through magnetic dipoles, (i.e., timereversal symmetry). Here, we report the experimental observation of chiral-spin transport in multiferroic BiFeO3, where the spin transport is controlled by reversing the ferroelectric polarization (i.e., spatial inversion symmetry). The ferroelectrically controlled magnons produce an unprecedented ratio of up to 18% rectification at room temperature. The spin torque that the magnons in BiFeO3 carry can be used to efficiently switch the magnetization of adja-cent magnets, with a spin-torque efficiency being comparable to the spin Hall effect in heavy metals. Utilizing such a controllable magnon generation and transmission in BiFeO3, an alloxide, energy-scalable logic is demonstrated composed of spin-orbit injection, detection, and magnetoelectric control. This observation opens a new chapter of multiferroic magnons and paves an alternative pathway towards low-dissipation nanoelectronics.

physics.app-ph↗

arXiv2023

Coexisting and interacting spin torque driven free and reference layer magnetic droplet solitons

Magnetic droplets are nanoscale, non-topological, magnetodynamical solitons that can be nucleated in spin torque nano-oscillators (STNOs) or spin Hall nano-oscillators (SHNOs). All theoretical, numerical, and experimental droplet studies have so far focused on the free layer (FL), and any additional dynamics in the reference layer (RL) have been entirely ignored. Here we show, using all-perpendicular STNOs, that there is not only significant magnetodynamics in the RL, but the reference layer itself can host a droplet coexisting with the FL droplet. Both droplets are observed experimentally as stepwise changes and sharp peaks in the dc and differential resistance, respectively. Whereas the single FL droplet is highly stable, the coexistence state exhibits high-power broadband microwave noise. Micromagnetic simulations corroborate the experimental results and reveal a strong interaction between the droplets. Our demonstration of strongly interacting and closely spaced droplets offers a unique platform for fundamental studies of highly non-linear soliton pair dynamics.

cond-mat.mes-hall↗

arXiv2023

A coupled magneto-structural continuum model for multiferroic $\mathrm{BiFeO}_3$

A continuum approach to study magnetoelectric multiferroic $\mathrm{BiFeO}_3$ (BFO) is proposed. Our modeling effort marries the ferroelectric (FE) phase field method and micromagnetic simulations in order to describe the entire multiferroic order parameter sector (polarization, oxygen antiphase tilts, strain, and magnetism) self-consistently on the same time and length scale. In this paper, we discuss our choice of ferroelectric and magnetic energy terms and demonstrate benchmarks against known behavior. We parameterize the lowest order couplings of the structural distortions against previous predictions from density functional theory calculations giving access to simulations of the FE domain wall (DW) topology. This allows us to estimate the energetic hierarchy and thicknesses of the numerous structural DWs. We then extend the model to the canted antiferromagnetic order and demonstrate how the ferroelectric domain boundaries influence the resulting magnetic DWs. We also highlight some capabilities of this model by providing two examples relevant for applications. We demonstrate spin wave transmission through the multiferroic domain boundaries which identify rectification in qualitative agreement with recent experimental observations. As a second example of application, we model fully-dynamical magnetoelectric switching, where we find a sensitivity on the Gilbert damping with respect to switching pathways. We envision that this modeling effort will set the basis for further work on properties of arbitrary 3D nanostructures of BFO (and related multiferroics) at the mesoscale.

cond-mat.mtrl-sci↗

arXiv2022

Layer-dependent optically-induced spin polarization in InSe

Optical control of spin in semiconductors has been pioneered using nanostructures of III-V and II-VI semiconductors, but the emergence of two-dimensional van der Waals materials offers an alternative low-dimensional platform for spintronic phenomena. Indium selenide (InSe), a group-III monochalcogenide van der Waals material, has shown promise for opto-electronics due to its high electron mobility, tunable direct bandgap, and quantum transport. There are predictions of spin-dependent optical selection rules suggesting potential for all-optical excitation and control of spin in a two-dimensional layered material. Despite these predictions, layer-dependent optical spin phenomena in InSe have yet to be explored. Here, we present measurements of layer-dependent optical spin dynamics in few-layer and bulk InSe. Polarized photoluminescence reveals layer-dependent optical orientation of spin, thereby demonstrating the optical selection rules in few-layer InSe. Spin dynamics are also studied in many-layer InSe using time-resolved Kerr rotation spectroscopy. By applying out-of-plane and in-plane static magnetic fields for polarized emission measurements and Kerr measurements, respectively, the $g$-factor for InSe was extracted. Further investigations are done by calculating precession values using a $\textbf{k} \cdot \textbf{p}$ model, which is supported by \textit{ab-initio} density functional theory. Comparison of predicted precession rates with experimental measurements highlights the importance of excitonic effects in InSe for understanding spin dynamics. Optical orientation of spin is an important prerequisite for opto-spintronic phenomena and devices, and these first demonstrations of layer-dependent optical excitation of spins in InSe lay the foundation for combining layer-dependent spin properties with advantageous electronic properties found in this material.

cond-mat.mtrl-sci↗

arXiv2022

Assessing the accuracy of compound formation energies with quantum Monte Carlo

Accurately predicting the formation energy of a compound, which describes its thermodynamic stability, is a key challenge in materials physics. Here, we employ many-body quantum Monte Carlo (QMC) with single-reference trial functions to compute the formation energy of two electronically disparate compounds, the intermetallic VPt$_2$ and the semiconductor CuI, for which standard density functional theory (DFT) predictions using both the Perdew-Burke Ernzerhof (PBE) and the strongly constrained and appropriately normed (SCAN) density functional approximations deviate markedly from available experimental values. For VPt$_2$, we find an agreement between QMC, SCAN, and PBE0 estimates, which therefore remain in disagreement with the much less exothermic experimental value. For CuI, the QMC result agrees with neither SCAN nor PBE pointing towards DFT exchange-correlation biases, likely related to the localized Cu $3d$ electrons. Compared to the behavior of some density functional approximations within DFT, spin-averaged QMC exhibits a smaller but still appreciable deviation when compared to experiment. The QMC result is slightly improved by incorporating spin-orbit corrections for CuI and solid I$_2$, so that experiment and theory are brought into imperfect but reasonable agreement within about 120~meV/atom.

cond-mat.mtrl-sci↗

arXiv2022

First-principles study of magnetic states and the anomalous Hall conductivity of $M$Nb$_3$S$_6$ ($M$=Co, Fe, Mn, and Ni)

Inspired by the observation of the extremely large anomalous Hall effect in the absence of applied magnetic fields or uniform magnetization in CoNb$_3$S$_6$ [Nature Comm. 9, 3280 (2018); Phys. Rev. Research 2, 023051 (2020)], we perform a first-principles study of this and related compounds of the $M$Nb$_3$S$_6$ type with different transition metal $M$ ions to determine their magnetic orders and the anomalous Hall conductivity (AHC). We find that non-coplanar antiferromagnetic ordering is favored relative to collinear or coplanar order in the case of $M$=Co, Fe and Ni, while ferromagnetic ordering is favored in MnNb$_3$S$_6$ at low temperatures. The AHC in these materials with non-coplanar spin ordering can reach about $e^2/h$ per crystalline layer, while being negligible for coplanar and collinear cases. We also find that the AHC depends sensitively on doping and reaches a maximum for intermediate values of the local spin exchange potential between 0.3 and 0.8 eV. Our AHC results are consistent with the reported Hall measurements in CoNb$_3$S$_6$ and suggest a possibility of similarly large anomalous Hall effects in related compounds.

cond-mat.mtrl-sci↗

arXiv2022

Origin of Metal-Insulator Transitions in Correlated Perovskite Metals

The mechanisms that drive metal-to-insulator transitions (MIT) in correlated solids are not fully understood. For example, the perovskite (PV) SrCoO3 is a FM metal while the oxygen-deficient (n-doped) brownmillerite (BM) SrCoO2.5 is an anti-ferromagnetic (AFM) insulator. Given the magnetic and structural transitions that accompany the MIT, the driver for such a MIT transition is unclear. We also observe that the perovskite metals LaNiO3, SrFeO3, and SrCoO3 also undergo MIT when n-doped via high-to-low valence compositional changes. Also, pressurizing the insulating BM SrCoO2.5 phase, drives a gap closing. Using DFT and correlated diffusion Monte Carlo approaches we demonstrate that the ABO3 perovskites most prone to MIT are self hole-doped materials, reminiscent of a negative charge-transfer system. Upon n-doping away from the negative-charge transfer metallic phase, an underlying charge-lattice (or e-phonon) coupling drives the system to a bond-disproportionated gapped state, thereby achieving ligand hole passivation at certain sites only, leading to charge-disproportionated states. The size of the gap opened is correlated with the size of the hole-filling at these ligand sites. This suggests that the interactions driving the gap opening to realize a MIT even in correlated metals is the charge-transfer energy, but it couples with the underlying phonons to enable the transition to the insulating phase. Other orderings (magnetic, charge, etc.) driven by weaker interactions are secondary and may assist gap openings at small dopings, but its the charge-transfer energy that predominantly determines the bandgap, with a negative energy preferring the metallic phase. This n-doping can be achieved by modulations in stoichiometry or composition or pressure. Hence, controlling the amount of the ligand-hole is key in controlling MIT. We compare our predictions to experiments where possible.

cond-mat.mtrl-sci↗

arXiv2021

A Combined First Principles Study of the Structural, Magnetic, and Phonon Properties of Monolayer CrI$_{3}$

The first magnetic 2D material discovered, monolayer (ML) CrI$_3$, is particularly fascinating due to its ground state ferromagnetism. Yet, because monolayer materials are difficult to probe experimentally, much remains unresolved about ML CrI$_{3}$'s structural, electronic, and magnetic properties. Here, we leverage Density Functional Theory (DFT) and high-accuracy Diffusion Monte Carlo (DMC) simulations to predict lattice parameters, magnetic moments, and spin-phonon and spin-lattice coupling of ML CrI$_{3}$. We exploit a recently developed surrogate Hessian DMC line search technique to determine CrI$_{3}$'s monolayer geometry with DMC accuracy, yielding lattice parameters in good agreement with recently-published STM measurements - an accomplishment given the $\sim 10$% variability in previous DFT-derived estimates depending upon the functional. Strikingly, we find previous DFT predictions of ML CrI$_3$'s magnetic spin moments are correct on average across a unit cell, but miss critical local spatial fluctuations in the spin density revealed by more accurate DMC. DMC predicts magnetic moments in ML CrI$_3$ are 3.62 $μ_B$ per chromium and -0.145 $μ_B$ per iodine; both larger than previous DFT predictions. The large disparate moments together with the large spin-orbit coupling of CrI$_3$'s I-$\textit{p}$ orbital suggests a ligand superexchange-dominated magnetic anisotropy in ML CrI$_3$, corroborating recent observations of magnons in its 2D limit. We also find ML CrI$_3$ exhibits a substantial spin-phonon coupling of $\sim$3.32 cm$^{-1}$. Our work thus establishes many of ML CrI$_{3}$'s key properties, while also continuing to demonstrate the pivotal role DMC can assume in the study of magnetic and other 2D materials.

cond-mat.mtrl-sci↗

arXiv2021

Quantum Anomalous Hall Effect in Perfectly Compensated Collinear Antiferromagnetic Thin Films

We show that the quantum anomalous Hall effect almost always occurs in magnetic topological insulator thin films whenever the top and bottom surface layer magnetizations are parallel, independent of the interior layer magnetization configuration. Using this criteria we identify structures that have a quantum anomalous Hall effect even though they have collinear magnetic structures with no net magnetization, and discuss strategies for realizing these interesting magnetic states experimentally.

cond-mat.mes-hall↗

arXiv2021

Bicircular light tuning of magnetic symmetry and topology in Dirac semimetal Cd$_3$As$_2$

We show that Floquet engineering using bicircular light (BCL) is a versatile way to control magnetic symmetries and topology in materials. The electric field of BCL, which is a superposition of two circularly polarized light waves with frequencies that are integer multiples of each other, traces out a rose pattern in the polarization plane that can be chosen to break selective symmetries, including spatial inversion. Using a realistic low-energy model, we theoretically demonstrate that the three-dimensional Dirac semimetal Cd$_3$As$_2$ is a promising platform for BCL Floquet engineering. Without strain, BCL irradiation induces a transition to a non-centrosymmetric magnetic Weyl semimetal phase with tunable energy separation between the Weyl nodes. In the presence of strain, we predict the emergence of a magnetic topological crystalline insulator with exotic unpinned surface Dirac states that are protected by a combination of twofold rotation and time-reversal $(2')$ and can be controlled by light.

cond-mat.mes-hall↗

arXiv2020

Repeated deterministic defect-assisted switching of magnetic vortex core polarity

Because of its stability, the polarity of a magnetic vortex core (VC) is a candidate for binary data storage. Switching can be accomplished, e.g, by driving the VC above a critical velocity $v_c$. Here, we report on controlled and repeated switching of VC polarity by significantly reducing $v_c$ locally. We excite vortex dynamics in thin Permalloy disks with a magnetic field pulse, and map the two-dimensional VC trajectory using time-resolved Kerr microscopy. In pristine samples, we observe normal gyrotropic motion of the VC. After laser-induced generation of defects, however, we observe repeated VC reversal at much-reduced critical velocities as low as 20 m/s. Micromagnetic simulations reveal how local reduction of exchange coupling can create VC reversal sites for deterministic VC switching.

cond-mat.mes-hall↗

arXiv2020

Topological surface states in strained Dirac semimetal thin films

We computationally study the Fermi arc states in a Dirac semimetal, both in a semi-infinite slab and in the thin-film limit. We use Cd$_3$A$_2$ as a model system, and include perturbations that break the $C_4$ symmetry and inversion symmetry. The surface states are protected by the mirror symmetries present in the bulk states and thus survive these perturbations. The Fermi arc states persist down to very thin films, thinner than presently measured experimentally, but are affected by breaking the symmetry of the Hamiltonian. Our findings are compatible with experimental observations of transport in Cd$_3$As$_2$, and also suggest that symmetry-breaking terms that preserve the Fermi arc states nevertheless can have a profound effect in the thin film limit.

cond-mat.mes-hall↗

arXiv2020

Discovering universal scaling laws in 3D printing of metals with genetic programming and dimensional analysis

We leverage dimensional analysis and genetic programming (a type of machine learning) to discover two strikingly simple but universal scaling laws, which remain accurate for different materials, processing conditions, and machines in metal three-dimensional (3D) printing. The first one is extracted from high-fidelity high-speed synchrotron X-ray imaging, and defines a new dimensionless number, Keyhole number, to predict melt-pool vapor depression depth. The second predicts porosity using the Keyhole number and another dimensionless number, normalized energy density. By reducing the dimensions of these longstanding problems, the low-dimensional scaling laws will aid process optimization and defect elimination, and potentially lead to a quantitative predictive framework for the critical issues in metal 3D printing. Moreover, the method itself is broadly applicable to a range of scientific areas.

physics.app-ph↗

arXiv2020

Doped NiO: the Mottness of a charge transfer insulator

The evolution of the electronic structures of strongly correlated insulators with doping has long been a central fundamental question in condensed matter physics; it is also of great practical relevance for applications. We have studied the evolution of NiO under hole {\em and} electron doping using high-quality thin film and a wide range of experimental and theoretical methods. The evolution is in both cases very smooth with dopant concentration. The band gap is asymmetric under electron and hole doping, consistent with a charge-transfer insulator picture, and is reduced faster under hole than electron doping. For both electron and hole doping, occupied states are introduced at the top of the valence band. The formation of deep donor levels under electron doping and the inability to pin otherwise empty states near the conduction band edge is indicative that local electron addition and removal energies are dominated by a Mott-like Hubbard $U$-interaction even though the global bandgap is predominantly a charge-transfer type gap.

cond-mat.str-el↗

arXiv2020

Tailoring spin wave channels in a reconfigurable artificial spin ice

Artificial spin ices are ensembles of geometrically-arranged, interacting nanomagnets which have shown promising potential for the realization of reconfigurable magnonic crystals. Such systems allow for the manipulation of spin waves on the nanoscale and their potential use as information carriers. However, there are presently two general obstacles to the realization of artificial spin ice-based magnonic crystals: the magnetic state of artificial spin ices is difficult to reconfigure and the magnetostatic interactions between the nanoislands are often weak, preventing mode coupling. We demonstrate, using micromagnetic modeling, that coupling a reconfigurable artificial spin ice geometry made of weakly interacting nanomagnets to a soft magnetic underlayer creates a complex system exhibiting dynamically coupled modes. These give rise to spin wave channels in the underlayer at well-defined frequencies, based on the artificial spin ice magnetic state, which can be reconfigured. These findings open the door to the realization of reconfigurable magnonic crystals with potential applications for data transport and processing in magnonic-based logic architectures.

cond-mat.mes-hall↗

arXiv2019

Defect energetics of cubic hafnia from quantum Monte Carlo simulations

Cubic hafnia (HfO$_2$) is of great interest for a number of applications in electronics because of its high dielectric constant. However, common defects in such applications degrade the properties of hafina. We have investigated the electronic properties of oxygen vacancies and nitrogen substitution in cubic HfO$_2$ using first principles calculations based on density functional theory (DFT) and many-body diffusion Monte Carlo (DMC) methods. We investigate five different charge defect states of oxygen vacancies, as well as substitutional N defects which can lead to local magnetic moments. Both DMC and DFT calculations shows that an oxygen vacancy induces strong lattice relaxations around the defect. Finally, we compare defect formation energies, charge and spin densities obtained from DMC with results obtained using DFT. While the obtained formation energies from DMC are 0.6~eV -- 1.5~eV larger than those from GGA+U, the agreement for the most important defects, neutral and positively charged oxygen vacancies, and nitrogen substitutional defect, under oxygen-poor conditions are in reasonably good agreement. Our work confirms that nitrogen can act to passivate cubic hafnia for applications in electronics.

cond-mat.mtrl-sci↗

arXiv2019

Phase Segmentation in Atom-Probe Tomography Using Deep Learning-Based Edge Detection

Atom-probe tomography (APT) facilitates nano- and atomic-scale characterization and analysis of microstructural features. Specifically, APT is well suited to study the interfacial properties of granular or heterophase systems. Traditionally, the identification of the interface between, for precipitate and matrix phases, in APT data has been obtained either by extracting iso-concentration surfaces based on a user-supplied concentration value or by manually perturbing the concentration value until the iso-concentration surface qualitatively matches the interface. These approaches are subjective, not scalable, and may lead to inconsistencies due to local composition inhomogeneities. We propose a digital image segmentation approach based on deep neural networks that transfer learned knowledge from natural images to automatically segment the data obtained from APT into different phases. This approach not only provides an efficient way to segment the data and extract interfacial properties but does so without the need for expensive interface labeling for training the segmentation model. We consider here a system with a precipitate phase in a matrix and with three different interface modalities---layered, isolated, and interconnected---that are obtained for different relative geometries of the precipitate phase. We demonstrate the accuracy of our segmentation approach through qualitative visualization of the interfaces, as well as through quantitative comparisons with proximity histograms obtained by using more traditional approaches.

cond-mat.mtrl-sci↗