arXiv subjects

Onur Mutlu

Publications and source records attributed to Onur Mutlu.

At least 235 records · Page 13Linked to original sources

arXiv2020

SIMDRAM: A Framework for Bit-Serial SIMD Processing Using DRAM

Processing-using-DRAM has been proposed for a limited set of basic operations (i.e., logic operations, addition). However, in order to enable the full adoption of processing-using-DRAM, it is necessary to provide support for more complex operations. In this paper, we propose SIMDRAM, a flexible general-purpose processing-using-DRAM framework that enables massively-parallel computation of a wide range of operations by using each DRAM column as an independent SIMD lane to perform bit-serial operations. SIMDRAM consists of three key steps to enable a desired operation in DRAM: (1) building an efficient majority-based representation of the desired operation, (2) mapping the operation input and output operands to DRAM rows and to the required DRAM commands that produce the desired operation, and (3) executing the operation. These three steps ensure efficient computation of any arbitrary and complex operation in DRAM. The first two steps give users the flexibility to efficiently implement and compute any desired operation in DRAM. The third step controls the execution flow of the in-DRAM computation, transparently from the user. We comprehensively evaluate SIMDRAM's reliability, area overhead, operation throughput, and energy efficiency using a wide range of operations and seven diverse real-world kernels to demonstrate its generality. Our results show that SIMDRAM provides up to 5.1x higher operation throughput and 2.5x higher energy efficiency than a state-of-the-art in-DRAM computing mechanism, and up to 2.5x speedup for real-world kernels while incurring less than 1% DRAM chip area overhead. Compared to a CPU and a high-end GPU, SIMDRAM is 257x and 31x more energy-efficient, while providing 93x and 6x higher operation throughput, respectively.

cs.AR↗

arXiv2020

Intelligent Architectures for Intelligent Computing Systems

Computing is bottlenecked by data. Large amounts of application data overwhelm storage capability, communication capability, and computation capability of the modern machines we design today. We argue that an intelligent architecture should be designed to handle data well. We show that handling data well requires designing architectures based on three key principles: 1) data-centric, 2) data-driven, 3) dataaware. We give several examples for how to exploit each of these principles to design a much more efficient and high performance computing system. We discuss how to enable adoption of such fundamentally more intelligent architectures, which we believe are key to efficiency, performance, and sustainability. We conclude with some guiding principles for future computing architecture and system designs. This accompanying short paper provides a summary of the associated invited talk at DATE 2021 and points the reader to further work that may be beneficial to examine.

cs.AR↗

arXiv2020

Aging-Aware Request Scheduling for Non-Volatile Main Memory

Modern computing systems are embracing non-volatile memory (NVM) to implement high-capacity and low-cost main memory. Elevated operating voltages of NVM accelerate the aging of CMOS transistors in the peripheral circuitry of each memory bank. Aggressive device scaling increases power density and temperature, which further accelerates aging, challenging the reliable operation of NVM-based main memory. We propose HEBE, an architectural technique to mitigate the circuit aging-related problems of NVM-based main memory. HEBE is built on three contributions. First, we propose a new analytical model that can dynamically track the aging in the peripheral circuitry of each memory bank based on the bank's utilization. Second, we develop an intelligent memory request scheduler that exploits this aging model at run time to de-stress the peripheral circuitry of a memory bank only when its aging exceeds a critical threshold. Third, we introduce an isolation transistor to decouple parts of a peripheral circuit operating at different voltages, allowing the decoupled logic blocks to undergo long-latency de-stress operations independently and off the critical path of memory read and write accesses, improving performance. We evaluate HEBE with workloads from the SPEC CPU2017 Benchmark suite. Our results show that HEBE significantly improves both performance and lifetime of NVM-based main memory.

cs.AR↗

arXiv2020

SneakySnake: A Fast and Accurate Universal Genome Pre-Alignment Filter for CPUs, GPUs, and FPGAs

Motivation: We introduce SneakySnake, a highly parallel and highly accurate pre-alignment filter that remarkably reduces the need for computationally costly sequence alignment. The key idea of SneakySnake is to reduce the approximate string matching (ASM) problem to the single net routing (SNR) problem in VLSI chip layout. In the SNR problem, we are interested in finding the optimal path that connects two terminals with the least routing cost on a special grid layout that contains obstacles. The SneakySnake algorithm quickly solves the SNR problem and uses the found optimal path to decide whether or not performing sequence alignment is necessary. Reducing the ASM problem into SNR also makes SneakySnake efficient to implement on CPUs, GPUs, and FPGAs. Results: SneakySnake significantly improves the accuracy of pre-alignment filtering by up to four orders of magnitude compared to the state-of-the-art pre-alignment filters, Shouji, GateKeeper, and SHD. For short sequences, SneakySnake accelerates Edlib (state-of-the-art implementation of Myers's bit-vector algorithm) and Parasail (state-of-the-art sequence aligner with a configurable scoring function), by up to 37.7x and 43.9x (>12x on average), respectively, with its CPU implementation, and by up to 413x and 689x (>400x on average), respectively, with FPGA and GPU acceleration. For long sequences, the CPU implementation of SneakySnake accelerates Parasail and KSW2 (sequence aligner of minimap2) by up to 979x (276.9x on average) and 91.7x (31.7x on average), respectively. As SneakySnake does not replace sequence alignment, users can still obtain all capabilities (e.g., configurable scoring functions) of the aligner of their choice, unlike existing acceleration efforts that sacrifice some aligner capabilities. Availability: https://github.com/CMU-SAFARI/SneakySnake

q-bio.GN↗

arXiv2020

Slim NoC: A Low-Diameter On-Chip Network Topology for High Energy Efficiency and Scalability

Emerging chips with hundreds and thousands of cores require networks with unprecedented energy/area efficiency and scalability. To address this, we propose Slim NoC (SN): a new on-chip network design that delivers significant improvements in efficiency and scalability compared to the state-of-the-art. The key idea is to use two concepts from graph and number theory, degree-diameter graphs combined with non-prime finite fields, to enable the smallest number of ports for a given core count. SN is inspired by state-of-the-art off-chip topologies; it identifies and distills their advantages for NoC settings while solving several key issues that lead to significant overheads on-chip. SN provides NoC-specific layouts, which further enhance area/energy efficiency. We show how to augment SN with state-of-the-art router microarchitecture schemes such as Elastic Links, to make the network even more scalable and efficient. Our extensive experimental evaluations show that SN outperforms both traditional low-radix topologies (e.g., meshes and tori) and modern high-radix networks (e.g., various Flattened Butterflies) in area, latency, throughput, and static/dynamic power consumption for both synthetic and real workloads. SN provides a promising direction in scalable and energy-efficient NoC topologies.

cs.AR↗

arXiv2020

Enabling High-Capacity, Latency-Tolerant, and Highly-Concurrent GPU Register Files via Software/Hardware Cooperation

Graphics Processing Units (GPUs) employ large register files to accommodate all active threads and accelerate context switching. Unfortunately, register files are a scalability bottleneck for future GPUs due to long access latency, high power consumption, and large silicon area provisioning. Prior work proposes hierarchical register file to reduce the register file power consumption by caching registers in a smaller register file cache. Unfortunately, this approach does not improve register access latency due to the low hit rate in the register file cache. In this paper, we propose the Latency-Tolerant Register File (LTRF) architecture to achieve low latency in a two-level hierarchical structure while keeping power consumption low. We observe that compile-time interval analysis enables us to divide GPU program execution into intervals with an accurate estimate of a warp's aggregate register working-set within each interval. The key idea of LTRF is to prefetch the estimated register working-set from the main register file to the register file cache under software control, at the beginning of each interval, and overlap the prefetch latency with the execution of other warps. We observe that register bank conflicts while prefetching the registers could greatly reduce the effectiveness of LTRF. Therefore, we devise a compile-time register renumbering technique to reduce the likelihood of register bank conflicts. Our experimental results show that LTRF enables high-capacity yet long-latency main GPU register files, paving the way for various optimizations. As an example optimization, we implement the main register file with emerging high-density high-latency memory technologies, enabling 8X larger capacity and improving overall GPU performance by 34%.

cs.AR↗

arXiv2020

Refresh Triggered Computation: Improving the Energy Efficiency of Convolutional Neural Network Accelerators

To employ a Convolutional Neural Network (CNN) in an energy-constrained embedded system, it is critical for the CNN implementation to be highly energy efficient. Many recent studies propose CNN accelerator architectures with custom computation units that try to improve energy-efficiency and performance of CNNs by minimizing data transfers from DRAM-based main memory. However, in these architectures, DRAM is still responsible for half of the overall energy consumption of the system, on average. A key factor of the high energy consumption of DRAM is the refresh overhead, which is estimated to consume 40% of the total DRAM energy. In this paper, we propose a new mechanism, Refresh Triggered Computation (RTC), that exploits the memory access patterns of CNN applications to reduce the number of refresh operations. We propose three RTC designs (min-RTC, mid-RTC, and full-RTC), each of which requires a different level of aggressiveness in terms of customization to the DRAM subsystem. All of our designs have small overhead. Even the most aggressive RTC design (i.e., full-RTC) imposes an area overhead of only 0.18% in a 16 Gb DRAM chip and can have less overhead for denser chips. Our experimental evaluation on six well-known CNNs show that RTC reduces average DRAM energy consumption by 24.4% and 61.3%, for the least aggressive and the most aggressive RTC implementations, respectively. Besides CNNs, we also evaluate our RTC mechanism on three workloads from other domains. We show that RTC saves 31.9% and 16.9% DRAM energy for Face Recognition and Bayesian Confidence Propagation Neural Network (BCPNN), respectively. We believe RTC can be applied to other applications whose memory access patterns remain predictable for a sufficiently long time.

cs.AR↗

arXiv2020

NATSA: A Near-Data Processing Accelerator for Time Series Analysis

Time series analysis is a key technique for extracting and predicting events in domains as diverse as epidemiology, genomics, neuroscience, environmental sciences, economics, and more. Matrix profile, the state-of-the-art algorithm to perform time series analysis, computes the most similar subsequence for a given query subsequence within a sliced time series. Matrix profile has low arithmetic intensity, but it typically operates on large amounts of time series data. In current computing systems, this data needs to be moved between the off-chip memory units and the on-chip computation units for performing matrix profile. This causes a major performance bottleneck as data movement is extremely costly in terms of both execution time and energy. In this work, we present NATSA, the first Near-Data Processing accelerator for time series analysis. The key idea is to exploit modern 3D-stacked High Bandwidth Memory (HBM) to enable efficient and fast specialized matrix profile computation near memory, where time series data resides. NATSA provides three key benefits: 1) quickly computing the matrix profile for a wide range of applications by building specialized energy-efficient floating-point arithmetic processing units close to HBM, 2) improving the energy efficiency and execution time by reducing the need for data movement over slow and energy-hungry buses between the computation units and the memory units, and 3) analyzing time series data at scale by exploiting low-latency, high-bandwidth, and energy-efficient memory access provided by HBM. Our experimental evaluation shows that NATSA improves performance by up to 14.2x (9.9x on average) and reduces energy by up to 27.2x (19.4x on average), over the state-of-the-art multi-core implementation. NATSA also improves performance by 6.3x and reduces energy by 10.2x over a general-purpose NDP platform with 64 in-order cores.

cs.AR↗

arXiv2020

WoLFRaM: Enhancing Wear-Leveling and Fault Tolerance in Resistive Memories using Programmable Address Decoders

Resistive memories have limited lifetime caused by limited write endurance and highly non-uniform write access patterns. Two main techniques to mitigate endurance-related memory failures are 1) wear-leveling, to evenly distribute the writes across the entire memory, and 2) fault tolerance, to correct memory cell failures. However, one of the main open challenges in extending the lifetime of existing resistive memories is to make both techniques work together seamlessly and efficiently. To address this challenge, we propose WoLFRaM, a new mechanism that combines both wear-leveling and fault tolerance techniques at low cost by using a programmable resistive address decoder (PRAD). The key idea of WoLFRaM is to use PRAD for implementing 1) a new efficient wear-leveling mechanism that remaps write accesses to random physical locations on the fly, and 2) a new efficient fault tolerance mechanism that recovers from faults by remapping failed memory blocks to available physical locations. Our evaluations show that, for a Phase Change Memory (PCM) based system with cell endurance of 108 writes, WoLFRaM increases the memory lifetime by 68% compared to a baseline that implements the best state-of-the-art wear-leveling and fault correction mechanisms. WoLFRaM's average / worst-case performance and energy overheads are 0.51% / 3.8% and 0.47% / 2.1% respectively.

cs.AR↗

arXiv2020

GateKeeper: A New Hardware Architecture for Accelerating Pre-Alignment in DNA Short Read Mapping

Motivation: High throughput DNA sequencing (HTS) technologies generate an excessive number of small DNA segments -- called short reads -- that cause significant computational burden. To analyze the entire genome, each of the billions of short reads must be mapped to a reference genome based on the similarity between a read and "candidate" locations in that reference genome. The similarity measurement, called alignment, formulated as an approximate string matching problem, is the computational bottleneck because: (1) it is implemented using quadratic-time dynamic programming algorithms, and (2) the majority of candidate locations in the reference genome do not align with a given read due to high dissimilarity. Calculating the alignment of such incorrect candidate locations consumes an overwhelming majority of a modern read mapper's execution time. Therefore, it is crucial to develop a fast and effective filter that can detect incorrect candidate locations and eliminate them before invoking computationally costly alignment operations. Results: We propose GateKeeper, a new hardware accelerator that functions as a pre-alignment step that quickly filters out most incorrect candidate locations. GateKeeper is the first design to accelerate pre-alignment using Field-Programmable Gate Arrays (FPGAs), which can perform pre-alignment much faster than software. GateKeeper can be integrated with any mapper that performs sequence alignment for verification. When implemented on a single FPGA chip, GateKeeper maintains high accuracy (on average >96%) while providing up to 90-fold and 130-fold speedup over the state-of-the-art software pre-alignment techniques, Adjacency Filter and Shifted Hamming Distance (SHD), respectively. The addition of GateKeeper as a pre-alignment step can reduce the verification time of the mrFAST mapper by a factor of 10. Availability: https://github.com/BilkentCompGen/GateKeeper

q-bio.GN↗

arXiv2020

Accelerating Genome Analysis: A Primer on an Ongoing Journey

Genome analysis fundamentally starts with a process known as read mapping, where sequenced fragments of an organism's genome are compared against a reference genome. Read mapping is currently a major bottleneck in the entire genome analysis pipeline, because state-of-the-art genome sequencing technologies are able to sequence a genome much faster than the computational techniques employed to analyze the genome. We describe the ongoing journey in significantly improving the performance of read mapping. We explain state-of-the-art algorithmic methods and hardware-based acceleration approaches. Algorithmic approaches exploit the structure of the genome as well as the structure of the underlying hardware. Hardware-based acceleration approaches exploit specialized microarchitectures or various execution paradigms (e.g., processing inside or near memory). We conclude with the challenges of adopting these hardware-accelerated read mappers.

cs.AR↗

arXiv2020

TADOC: Text Analytics Directly on Compression

This article provides a comprehensive description of Text Analytics Directly on Compression (TADOC), which enables direct document analytics on compressed textual data. The article explains the concept of TADOC and the challenges to its effective realizations. Additionally, a series of guidelines and technical solutions that effectively address those challenges, including the adoption of a hierarchical compression method and a set of novel algorithms and data structure designs, are presented. Experiments on six data analytics tasks of various complexities show that TADOC can save 90.8% storage space and 87.9% memory usage, while halving data processing times.

cs.DS↗

arXiv2020

FlexWatts: A Power- and Workload-Aware Hybrid Power Delivery Network for Energy-Efficient Microprocessors

Modern client processors typically use one of three commonly-used power delivery network (PDN): 1) motherboard voltage regulators (MBVR), 2) integrated voltage regulators (IVR), and 3) low dropout voltage regulators (LDO). We observe that the energy-efficiency of each of these PDNs varies with the processor power (e.g., thermal design power (TDP) and dynamic power-state) and workload characteristics. This leads to energy inefficiency and performance loss, as modern client processors operate across a wide spectrum of power consumption and execute a wide variety of workloads. We propose FlexWatts, a hybrid adaptive PDN for modern client processors whose goal is to provide high energy-efficiency across the processor's wide range of power consumption and workloads by dynamically allocating PDNs to processor domains. FlexWatts is based on three key ideas. First, it combines IVRs and LDOs in a novel way to share multiple on-chip and off-chip resources. This hybrid PDN is allocated for processor domains with a wide power consumption range and it dynamically switches between two modes: IVR-Mode and LDO-Mode, depending on the power consumption. Second, for all other processor domains, FlexWatts statically allocates off-chip VRs. Third, FlexWatts introduces a prediction algorithm that switches the hybrid PDN to the mode that is the most beneficial. To evaluate the tradeoffs of PDNs, we develop and open-source PDNspot, the first validated architectural PDN model that enables quantitative analysis of PDN metrics. Using PDNspot, we evaluate FlexWatts on a wide variety of SPEC CPU2006, 3DMark06, and battery life workloads against IVR, the state-of-the-art PDN in modern client processors. For a 4W TDP processor, FlexWatts improves the average performance of the SPEC CPU2006 and 3DMark06 workloads by 22% and 25%, respectively. FlexWatts has comparable cost and area overhead to IVR.

cs.AR↗

arXiv2020

Bit-Exact ECC Recovery (BEER): Determining DRAM On-Die ECC Functions by Exploiting DRAM Data Retention Characteristics

Increasing single-cell DRAM error rates have pushed DRAM manufacturers to adopt on-die error-correction coding (ECC), which operates entirely within a DRAM chip to improve factory yield. The on-die ECC function and its effects on DRAM reliability are considered trade secrets, so only the manufacturer knows precisely how on-die ECC alters the externally-visible reliability characteristics. Consequently, on-die ECC obstructs third-party DRAM customers (e.g., test engineers, experimental researchers), who typically design, test, and validate systems based on these characteristics. To give third parties insight into precisely how on-die ECC transforms DRAM error patterns during error correction, we introduce Bit-Exact ECC Recovery (BEER), a new methodology for determining the full DRAM on-die ECC function (i.e., its parity-check matrix) without hardware tools, prerequisite knowledge about the DRAM chip or on-die ECC mechanism, or access to ECC metadata (e.g., error syndromes, parity information). BEER exploits the key insight that non-intrusively inducing data-retention errors with carefully-crafted test patterns reveals behavior that is unique to a specific ECC function. We use BEER to identify the ECC functions of 80 real LPDDR4 DRAM chips with on-die ECC from three major DRAM manufacturers. We evaluate BEER's correctness in simulation and performance on a real system to show that BEER is effective and practical across a wide range of on-die ECC functions. To demonstrate BEER's value, we propose and discuss several ways that third parties can use BEER to improve their design and testing practices. As a concrete example, we introduce and evaluate BEEP, the first error profiling methodology that uses the known on-die ECC function to recover the number and bit-exact locations of unobservable raw bit errors responsible for observable post-correction errors.

cs.AR↗

arXiv2020

NERO: A Near High-Bandwidth Memory Stencil Accelerator for Weather Prediction Modeling

Ongoing climate change calls for fast and accurate weather and climate modeling. However, when solving large-scale weather prediction simulations, state-of-the-art CPU and GPU implementations suffer from limited performance and high energy consumption. These implementations are dominated by complex irregular memory access patterns and low arithmetic intensity that pose fundamental challenges to acceleration. To overcome these challenges, we propose and evaluate the use of near-memory acceleration using a reconfigurable fabric with high-bandwidth memory (HBM). We focus on compound stencils that are fundamental kernels in weather prediction models. By using high-level synthesis techniques, we develop NERO, an FPGA+HBM-based accelerator connected through IBM CAPI2 (Coherent Accelerator Processor Interface) to an IBM POWER9 host system. Our experimental results show that NERO outperforms a 16-core POWER9 system by 4.2x and 8.3x when running two different compound stencil kernels. NERO reduces the energy consumption by 22x and 29x for the same two kernels over the POWER9 system with an energy efficiency of 1.5 GFLOPS/Watt and 17.3 GFLOPS/Watt. We conclude that employing near-memory acceleration solutions for weather prediction modeling is promising as a means to achieve both high performance and high energy efficiency.

cs.AR↗

arXiv2020

FIGARO: Improving System Performance via Fine-Grained In-DRAM Data Relocation and Caching

DRAM Main memory is a performance bottleneck for many applications due to the high access latency. In-DRAM caches work to mitigate this latency by augmenting regular-latency DRAM with small-but-fast regions of DRAM that serve as a cache for the data held in the regular-latency region of DRAM. While an effective in-DRAM cache can allow a large fraction of memory requests to be served from a fast DRAM region, the latency savings are often hindered by inefficient mechanisms for relocating copies of data into and out of the fast regions. Existing in-DRAM caches have two sources of inefficiency: (1) the data relocation granularity is an entire multi-kilobyte row of DRAM; and (2) because the relocation latency increases with the physical distance between the slow and fast regions, multiple fast regions are physically interleaved among slow regions to reduce the relocation latency, resulting in increased hardware area and manufacturing complexity. We propose a new substrate, FIGARO, that uses existing shared global buffers among subarrays within a DRAM bank to provide support for in-DRAM data relocation across subarrays at the granularity of a single cache block. FIGARO has a distance-independent latency within a DRAM bank, and avoids complex modifications to DRAM. Using FIGARO, we design a fine-grained in-DRAM cache called FIGCache. The key idea of FIGCache is to cache only small, frequently-accessed portions of different DRAM rows in a designated region of DRAM. By caching only the parts of each row that are expected to be accessed in the near future, we can pack more of the frequently-accessed data into FIGCache, and can benefit from additional row hits in DRAM. Our evaluations show that FIGCache improves the average performance of a system using DDR4 DRAM by 16.3% and reduces average DRAM energy consumption by 7.8% for 8-core workloads, over a conventional system without in-DRAM caching.

cs.AR↗

arXiv2020

GenASM: A High-Performance, Low-Power Approximate String Matching Acceleration Framework for Genome Sequence Analysis

Genome sequence analysis has enabled significant advancements in medical and scientific areas such as personalized medicine, outbreak tracing, and the understanding of evolution. Unfortunately, it is currently bottlenecked by the computational power and memory bandwidth limitations of existing systems, as many of the steps in genome sequence analysis must process a large amount of data. A major contributor to this bottleneck is approximate string matching (ASM). We propose GenASM, the first ASM acceleration framework for genome sequence analysis. We modify the underlying ASM algorithm (Bitap) to significantly increase its parallelism and reduce its memory footprint, and we design the first hardware accelerator for Bitap. Our hardware accelerator consists of specialized compute units and on-chip SRAMs that are designed to match the rate of computation with memory capacity and bandwidth. We demonstrate that GenASM is a flexible, high-performance, and low-power framework, which provides significant performance and power benefits for three different use cases in genome sequence analysis: 1) GenASM accelerates read alignment for both long reads and short reads. For long reads, GenASM outperforms state-of-the-art software and hardware accelerators by 116x and 3.9x, respectively, while consuming 37x and 2.7x less power. For short reads, GenASM outperforms state-of-the-art software and hardware accelerators by 111x and 1.9x. 2) GenASM accelerates pre-alignment filtering for short reads, with 3.7x the performance of a state-of-the-art pre-alignment filter, while consuming 1.7x less power and significantly improving the filtering accuracy. 3) GenASM accelerates edit distance calculation, with 22-12501x and 9.3-400x speedups over the state-of-the-art software library and FPGA-based accelerator, respectively, while consuming 548-582x and 67x less power.

cs.AR↗

arXiv2020

Optically Connected Memory for Disaggregated Data Centers

Recent advances in integrated photonics enable the implementation of reconfigurable, high-bandwidth, and low energy-per-bit interconnects in next-generation data centers. We propose and evaluate an Optically Connected Memory (OCM) architecture that disaggregates the main memory from the computation nodes in data centers. OCM is based on micro-ring resonators (MRRs), and it does not require any modification to the DRAM memory modules. We calculate energy consumption from real photonic devices and integrate them into a system simulator to evaluate performance. Our results show that (1) OCM is capable of interconnecting four DDR4 memory channels to a computing node using two fibers with 1.07 pJ energy-per-bit consumption and (2) OCM performs up to 5.5x faster than a disaggregated memory with 40G PCIe NIC connectors to computing nodes.

cs.AR↗