arXiv subjects

Oscar Adamuz-Hinojosa

Publications and source records attributed to Oscar Adamuz-Hinojosa.

13 recordsLinked to original sources

arXiv2026

Performance Analysis of 5G RAN Slicing Deployment Options in Industry 4.0 Factories

This paper studies Radio Access Network (RAN) slicing strategies for 5G Industry~4.0 networks with ultra-reliable low-latency communication (uRLLC) requirements. We compare four RAN slicing deployment options that differ in slice sharing and in the degree of per-line or per-flow isolation. Unlike prior works that assume a fixed slicing structure, this work addresses how RAN slicing should be instantiated in the presence of multiple production lines and heterogeneous industrial flows. A Stochastic Network Calculus (SNC)-based analytical framework and a heuristic slice planner are used to evaluate per-flow delay guarantees and radio resource utilization. Within the considered RAN-level analytical model, the results show that, under resource scarcity, only per-flow slicing prevents delay violations, whereas slice-sharing and hybrid deployments improve aggregation efficiency at the cost of weaker protection for the most delay-critical flows. Execution-time results show that the proposed planner operates at non-real-time (Non-RT) time scales, supporting its implementation as an rApp within Open RAN (O-RAN) Non-RT RAN Intelligent Controller (RIC) control loops.

cs.NI↗

arXiv2026

How Many Qubits Can Be Teleported? Scalability of Fidelity-Constrained Quantum Applications

Quantum networks (QNs) enable qubit transfer between distant nodes through quantum teleportation, which reconstructs a quantum state at a remote node by consuming a shared Bell pair. In multi-qubit quantum applications (QApps), the teleported qubits may need to remain stored in quantum memories until execution can start, while decoherence progressively reduces their fidelity with respect to the ideal target state. Such QApps can operate only if all teleported qubits simultaneously satisfy a minimum fidelity threshold. In this paper, we study how many qubits can be teleported under this fidelity-constrained operation in a two-node QN. To this end, we define a QApp-level reliability metric as the probability that all end-to-end Bell pairs satisfy the target fidelity when the multi-qubit teleportation stage is completed. We then develop a Monte Carlo simulator that captures stochastic Bell-pair generation, Quantum Repeater (QR)-assisted entanglement distribution, and fidelity degradation. The analysis considers fiber-based and terrestrial free-space optical (FSO) quantum links, as well as representative NV-center- and trapped-ion-based quantum memories. Results show that memory coherence is the main scalability bottleneck under stringent fidelity targets, while parallel entanglement generation is essential for multi-qubit teleportation.

cs.NI↗

arXiv2026

Impact of 5G Latency and Jitter on TAS Scheduling in a 5G-TSN Network: An Empirical Study

Deterministic communications are essential to meet the stringent delay and jitter requirements of Industrial Internet of Things (IIoT) services. IIoT increasingly demands wide-area wireless mobility to support Autonomous Mobile Robots (AMR) and dynamic workflows. Integrating Time-Sensitive Networking (TSN) with 5G private networks is emerging as a promising approach to fulfill these requirements. In this architecture, 5G provides wireless access for industrial devices, which connect to a TSN backbone that interfaces with the enterprise edge/cloud, where IIoT control and computing systems reside. TSN achieves bounded latency and low jitter using IEEE 802.1Qbv Time-Aware Shaper (TAS), which schedules the network traffic in precise time slots. However, the stochastic delay and jitter inherent in 5G disrupt TSN scheduling, requiring careful tuning of TAS parameters to maintain end-to-end determinism. This paper presents an empirical study evaluating the impact of 5G downlink delay and jitter on TAS scheduling using a testbed with TSN switches and a commercial 5G network. Results show that guaranteeing bounded latency and jitter requires careful setting of TAS transmission window offset between TSN switches based on the measured 5G delay bounded by a high order p-th percentile. Otherwise, excessive offset may cause additional delay or even a complete loss of determinism.

cs.NI↗

arXiv2026

RIS Control through the Lens of Stochastic Network Calculus: An O-RAN Framework for Delay-Sensitive 6G Applications

Reconfigurable Intelligent Surfaces (RIS) enable dynamic electromagnetic control for 6G networks, but existing control schemes lack responsiveness to fast-varying network conditions, limiting their applicability for ultra-reliable low latency communications. This work addresses uplink delay minimization in multi-RIS scenarios with heterogeneous per-user latency and reliability demands. We propose Delay-Aware RIS Orchestrator (DARIO), an O-RAN-compliant framework that dynamically assigns RIS devices to users within short time windows, adapting to traffic fluctuations to meet per-user delay and reliability targets. DARIO relies on a novel Stochastic Network Calculus (SNC) model to analytically estimate the delay bound for each possible user-RIS assignment under specific traffic and service dynamics. These estimations are used by DARIO to formulate a Nonlinear Integer Program (NIP), for which an online heuristic provides near-optimal performance with low computational overhead. Extensive evaluations with simulations and real traffic traces show consistent delay reductions up to 95.7% under high load or RIS availability.

cs.NI↗

arXiv2025

Unleashing 5G Seamless Integration with TSN for Industry 5.0: Frame Forwarding and QoS Treatment

Integrating Time-Sensitive Networking (TSN) and 5th Generation (5G) systems is key for providing wireless low-latency services in industry. Despite research efforts, challenges remain. Due to the lack of commercial 5G modems supporting Ethernet-based sessions, tunneling mechanisms must be used to enable Layer 2 connectivity between TSN islands via IP-based 5G modems. Furthermore, harmonizing traffic classification and prioritization between TSN and 5G technologies is crucial for meeting industrial service requirements. In this work, we propose a Virtual Extensible LAN (VxLAN)-based solution to harmonize frame forwarding and Quality of Service (QoS) treatment among 5G and TSN. Our solution supports multiple Virtual Local Area Networks (VLANs) across several production lines. Furthermore, it supports TSN traffic mapping into 5G QoS flows. We use a 5G testbed to validate the effectiveness of the adopted solution. Our results show the average delay introduced by the proposed mechanisms is approximately 100 μs, which is significantly lower than the typical 5G packet transmission delay. Moreover, our findings demonstrate our solution preserves QoS treatment between the 5G system and TSN, ensuring that the priority of 5G QoS flows aligns with the priorities of industrial traffic flows.

cs.NI↗

arXiv2025

Empirical Analysis of 5G TDD Patterns Configurations for Industrial Automation Traffic

The digital transformation driven by Industry 4.0 relies on networks that support diverse traffic types with strict deterministic end-to-end latency and mobility requirements. To meet these requirements, future industrial automation networks will use time-sensitive networking, integrating 5G as wireless access points to connect production lines with time-sensitive networking bridges and the enterprise edge cloud. However, achieving deterministic end-to-end latency remains a challenge, particularly due to the variable packet transmission delay introduced by the 5G system. While time-sensitive networking bridges typically operate with latencies in the range of hundreds of microseconds, 5G systems may experience delays ranging from a few to several hundred milliseconds. This paper investigates the potential of configuring the 5G time division duplex pattern to minimize packet transmission delay in industrial environments. Through empirical measurements using a commercial 5G system, we evaluate different TDD configurations under varying traffic loads, packet sizes and full buffer status report activation. Based on our findings, we provide practical configuration recommendations for satisfying requirements in industrial automation, helping private network providers increase the adoption of 5G.

cs.NI↗

arXiv2025

Empirical Analysis of the Impact of 5G Jitter on Time-Aware Shaper Scheduling in a 5G-TSN Network

Deterministic communications are essential for industrial automation, ensuring strict latency requirements and minimal jitter in packet transmission. Modern production lines, specializing in robotics, require higher flexibility and mobility, which drives the integration of Time-Sensitive Networking (TSN) and 5G networks in Industry 4.0. TSN achieves deterministic communications by using mechanisms such as the IEEE 802.1Qbv Time-Aware Shaper (TAS), which schedules packet transmissions within precise cycles, thereby reducing latency, jitter, and congestion. 5G networks complement TSN by providing wireless mobility and supporting ultra-Reliable Low-Latency Communications. However, 5G channel effects such as fast fading, interference, and network-induced latency and jitter can disrupt TSN traffic, potentially compromising deterministic scheduling and performance. This paper presents an empirical analysis of 5G network latency and jitter on IEEE 802.1Qbv performance in a 5G-TSN network. We evaluate the impact of 5G integration on TSN's deterministic scheduling through a testbed combining IEEE 802.1Qbv-enabled switches, TSN translators, and a commercial 5G system. Our results show that, with proper TAS configuration in the TSN switch aligned with the 5G system, jitter can be mitigated, maintaining deterministic performance.

cs.NI↗

arXiv2025

MAREA: A Delay-Aware Multi-time-Scale Radio Resource Orchestrator for 6G O-RAN

The Open Radio Access Network (O-RAN)-compliant solutions often lack crucial details for implementing effective control loops at various time scales. To overcome this, we introduce MAREA, an O-RAN-compliant mathematical framework designed for the allocation of radio resources to multiple ultra-Reliable Low Latency Communication (uRLLC) services. In the near-real-time (RT) control loop, MAREA employs a novel Martingales-based model to determine the guaranteed radio resources for each uRLLC service. Unlike traditional queueing theory approaches, this model ensures that the probability of packet transmission delays exceeding a predefined threshold -- the violation probability -- remains below a target tolerance. Additionally, MAREA uses a real-time control loop to monitor transmission queues and dynamically adjust guaranteed radio resources in response to traffic anomalies. To the best of our knowledge, MAREA is the first O-RAN-compliant solution that leverages Martingales for both near-RT and RT control loops. Simulations demonstrate that MAREA significantly outperforms reference solutions, achieving an average violation probability that is x10 lower.

cs.NI↗

arXiv2024

ORANUS: Latency-tailored Orchestration via Stochastic Network Calculus in 6G O-RAN

The Open Radio Access Network (O-RAN)-compliant solutions lack crucial details to perform effective control loops at multiple time scales. In this vein, we propose ORANUS, an O-RAN-compliant mathematical framework to allocate radio resources to multiple ultra Reliable Low Latency Communication (uRLLC) services. In the near-RT control loop, ORANUS relies on a novel Stochastic Network Calculus (SNC)-based model to compute the amount of guaranteed radio resources for each uRLLC service. Unlike traditional approaches as queueing theory, the SNC-based model allows ORANUS to ensure the probability the packet transmission delay exceeds a budget, i.e., the violation probability, is below a target tolerance. ORANUS also utilizes a RT control loop to monitor service transmission queues, dynamically adjusting the guaranteed radio resources based on detected traffic anomalies. To the best of our knowledge, ORANUS is the first O-RAN-compliant solution which benefits from SNC to carry out near-RT and RT control loops. Simulation results show that ORANUS significantly improves over reference solutions, with an average violation probability 10x lower.

cs.NI↗

arXiv2020

Sharing gNB components in RAN slicing: A perspective from 3GPP/NFV standards

To implement the next Generation NodeBs (gNBs) that are present in every Radio Access Network (RAN) slice subnet, Network Function Virtualization (NFV) enables the deployment of some of the gNB components as Virtual Networks Functions (VNFs). Deploying individual VNF instances for these components could guarantee the customization of each RAN slice subnet. However, due to the multiplicity of VNFs, the required amount of virtual resources will be greater compared to the case where a single VNF instance carries the aggregated traffic of all the RAN slice subnets. Sharing gNB components between RAN slice subnets could optimize the trade-off between customization, isolation and resource utilization. In this article, we shed light on the key aspects in the Third Generation Partnership Project (3GPP)/NFV standards for sharing gNB components. First, we identify four possible scenarios for sharing gNB components. Then, we analyze the impact of sharing on the customization level of each RAN slice subnet. Later, we determine the main factors that enable isolation between RAN slice subnets. Finally, we propose a 3GPP/NFV-based description model to define the lifecycle management of shared gNB components

cs.NI↗

arXiv2019

Harmonizing 3GPP and NFV description models to provide customized RAN slices in 5G networks

The standardization of Radio Access Network (RAN) in mobile networks has traditionally been led by 3GPP. However, the emergence of RAN slicing has introduced new aspects that fall outside 3GPP scope. Among them, network virtualization enables the particularization of multiple RAN behaviors over a common physical infrastructure. Using Virtualized Network Functions (VNFs) that comprise customized radio functionalities, each virtualized RAN, denominated RAN slice, could meet its specific requirements. Although 3GPP specifies the description model to manage RAN slices, it can neither particularize the behavior of a RAN slice nor leverage the NFV descriptors to define how its VNFs can accommodate its spatial and temporal traffic demands. In this article, we propose a description model that harmonizes 3GPP and ETSI-NFV viewpoints to manage RAN slices. The proposed model enables the translation of RAN slice requirements into customized virtualized radio functionalities defined through NFV descriptors. To clarify this proposal, we provide an example where three RAN slices with disruptive requirements are described following our solution.

cs.NI↗

arXiv2018

Automated Network Service Scaling in NFV: Concepts, Mechanisms and Scaling Workflow

Next-generation systems are anticipated to be digital platforms supporting innovative services with rapidly changing traffic patterns. To cope with this dynamicity in a cost-efficient manner, operators need advanced service management capabilities such as those provided by NFV. NFV enables operators to scale network services with higher granularity and agility than today. For this end, automation is key. In search of this automation, the European Telecommunications Standards Institute (ETSI) has defined a reference NFV framework that make use of model-driven templates called Network Service Descriptors (NSDs) to operate network services through their lifecycle. For the scaling operation, an NSD defines a discrete set of instantiation levels among which a network service instance can be resized throughout its lifecycle. Thus, the design of these levels is key for ensuring an effective scaling. In this article, we provide an overview of the automation of the network service scaling operation in NFV, addressing the options and boundaries introduced by ETSI normative specifications. We start by providing a description of the NSD structure, focusing on how instantiation levels are constructed. For illustrative purposes, we propose an NSD for a representative NS. This NSD includes different instantiation levels that enable different ways to automatically scale this NS. Then, we show the different scaling procedures the NFV framework has available, and how it may automate their triggering. Finally, we propose an ETSI-compliant workflow to describe in detail a representative scaling procedure. This workflow clarifies the interactions and information exchanges between the functional blocks in the NFV framework when performing the scaling operation.

cs.NI↗

arXiv2018

The Creation Phase in Network Slicing: From a Service Order to an Operative Network Slice

Network slicing is considered a key mechanism to serve the multitude of tenants (e.g. vertical industries) targeted by forthcoming 5G systems in a flexible and cost-efficient manner. In this paper, we present a SDN/NFV architecture with multi-tenancy support. This architecture enables a network slice provider to deploy network slice instances for multiple tenants on-the-fly, and simultaneously provision them with isolation guarantees. Following the Network Slice as-a-Service delivery model, a tenant may access a Service Catalog, selecting the slice that best fits its needs and ordering its deployment. This work provides a detailed view on the stages that a network slice provider must follow to deploy the ordered network slice instance, accommodating it into a multi-domain infrastructure, and putting it operative for tenant's consumption. These stages address critical issues identified in the literature, including (i) the mapping from high-level service requirements to network functions and infrastructure requirements, (ii) the admission control, and (iii) the specific information a network slice descriptor should have. With the proposed architecture and the recommended set of stages, network slice providers can deploy (and later operate) slice instances with great agility, flexibility, and full automation.

cs.NI↗