arXiv subjects

Osman Balci

Publications and source records attributed to Osman Balci.

13 recordsLinked to original sources

arXiv2026

Excitonic Mott transition without population inversion

Exciton dissociation via the excitonic Mott transition (EMT) governs the high-density optical response of semiconductors and sets fundamental limits for optoelectronic devices. The EMT is conventionally linked to the onset of population inversion and the emergence of optical gain. Here, we demonstrate that this paradigm can break down under ultrafast non-equilibrium excitation. Using femtosecond pump-probe optical spectroscopy, we drive a monolayer transition metal dichalcogenide into a dense photoexcited state in which the excitonic resonance is completely quenched within ~100 fs, while the optical gain is entirely absent across the explored fluence range. State-of-the-art real-time ab initio simulations reveal that the EMT is governed by an interplay of strongly nonthermal carrier populations and nonequilibrium dynamical screening of the Coulomb interaction. The quantitative agreement between theory and experiment identifies a distinct, ultrafast pathway to exciton ionization beyond quasi-equilibrium descriptions and demonstrates that population inversion is not a universal prerequisite for the EMT.

cond-mat.mes-hall↗

arXiv2024

Laser Activation of Single Group-IV Colour Centres in Diamond

Spin-photon interfaces based on group-IV colour centres in diamond offer a promising platform for quantum networks. A key challenge in the field is realizing precise single-defect positioning and activation, which is crucial for scalable device fabrication. Here we address this problem by demonstrating a two-step fabrication method for tin vacancy (SnV-) centres that uses site-controlled ion implantation followed by local femtosecond laser annealing with in-situ spectral monitoring. The ion implantation is performed with sub-50 nm resolution and a dosage that is controlled from hundreds of ions down to single ions per site, limited by Poissonian statistics. Using this approach, we successfully demonstrate site-selective creation and modification of single SnV- centres. The technique opens a window onto materials tuning at the single defect level, and provides new insight into defect structures and dynamics during the annealing process. While demonstrated for SnV- centres, this versatile approach can be readily generalised to other implanted colour centres in diamond and wide-bandgap materials.

quant-ph↗

arXiv2022

Electrically tuneable nonequilibrium optical response of graphene

The ability to tune the optical response of a material via electrostatic gating is crucial for optoelectronic applications, such as electro-optic modulators, saturable absorbers, optical limiters, photodetectors and transparent electrodes. The band structure of single layer graphene (SLG), with zero-gap, linearly dispersive conduction and valence bands, enables an easy control of the Fermi energy E$_F$ and of the threshold for interband optical absorption. Here, we report the tunability of the SLG non-equilibrium optical response in the near-infrared (1000-1700nm/0.729-1.240eV), exploring a range of E$_F$ from -650 to 250 meV by ionic liquid gating. As E$_F$ increases from the Dirac point to the threshold for Pauli blocking of interband absorption, we observe a slow-down of the photobleaching relaxation dynamics, which we attribute to the quenching of optical phonon emission from photoexcited charge carriers. For E$_F$ exceeding the Pauli blocking threshold, photobleaching eventually turns into photoinduced absorption, due to hot electrons' excitation increasing SLG absorption. The ability to control both recovery time and sign of nonequilibrium optical response by electrostatic gating makes SLG ideal for tunable saturable absorbers with controlled dynamics.

cond-mat.mtrl-sci↗

arXiv2020

Tunable, grating-gated, graphene-on-polyimide terahertz modulators

We present an electrically switchable graphene terahertz (THz) modulator with a tunable-by-design optical bandwidth and we exploit it to compensate the cavity dispersion of a quantum cascade laser (QCL). Electrostatic gating is achieved by a metal-grating used as a gate electrode, with an HfO2/AlOx gate dielectric on top. This is patterned on a polyimide layer, which acts as a quarter wave resonance cavity, coupled with an Au reflector underneath. We get 90% modulation depth of the intensity, combined with a 20 kHz electrical bandwidth in the 1.9 _ 2.7 THz range. We then integrate our modulator with a multimode THz QCL. By adjusting the modulator operational bandwidth, we demonstrate that the graphene modulator can partially compensates the QCL cavity dispersion, resulting in an integrated laser behaving as a stable frequency comb over 35% of the laser operational range, with 98 equidistant optical modes and with a spectral coverage of ~ 1.2 THz. This has significant potential for frontier applications in the terahertz, as tunable transformation-optics devices, active photonic components, adaptive and quantum optics, and as a metrological tool for spectroscopy at THz frequencies.

physics.app-ph↗

arXiv2020

High-responsivity graphene photodetectors integrated on silicon microring resonators

Graphene integrated photonics provides several advantages over conventional Si photonics. Single layer graphene (SLG) enables fast, broadband, and energy-efficient electro-optic modulators, optical switches and photodetectors (GPDs), and is compatible with any optical waveguide. The last major barrier to SLG-based optical receivers lies in the low responsivity - electrical output per optical input - of GPDs compared to conventional PDs. Here we overcome this shortfall by integrating a photo-thermoelectric GPD with a Si microring resonator. Under critical coupling, we achieve $>$90% light absorption in a $\sim$6 $μ$m SLG channel along the Si waveguide. Exploiting the cavity-enhanced light-matter interaction, causing carriers in SLG to reach $\sim$400 K for an input power of $\sim$0.6 mW, we get a voltage responsivity $\sim$90 V/W, demonstrating the feasibility of our approach. Our device is capable of detecting data rates up to 20 Gbit/s, with a receiver sensitivity enabling it to operate at a 10$^{-9}$ bit-error rate, on par with mature semiconductor technology. The natural generation of a voltage rather than a current, removes the need for transimpedance amplification, with a reduction of the energy-per-bit cost and foot-print, when compared to a traditional semiconductor-based receiver.

physics.app-ph↗

arXiv2019

Electrically Switchable Metadevices via Graphene

Metamaterials bring sub-wavelength resonating structures together to overcome the limitations of conventional materials. The realization of active metadevices has been an outstanding challenge that requires electrically reconfigurable components operating over a broad spectrum with a wide dynamic range. The existing capability of metamaterials, however, is not sufficient to realize this goal. Here, by integrating passive metamaterials with active graphene devices, we demonstrate a new class of electrically controlled active metadevices working in microwave frequencies. The fabricated active metadevices enable efficient control of both amplitude (> 50 dB) and phase (> 90°) of electromagnetic waves. In this hybrid system, graphene operates as a tunable Drude metal that controls the radiation of the passive metamaterials. Furthermore, by integrating individually addressable arrays of metadevices, we demonstrate a new class of spatially varying digital metasurfaces where the local dielectric constant can be reconfigured with applied bias voltages. Additionally, we reconfigure resonance frequency of split ring resonators without changing its amplitude by damping one of the two coupled metasurfaces via graphene. Our approach is general enough to implement various metamaterial systems that could yield new applications ranging from electrically switchable cloaking devices to adaptive camouflage systems.

physics.optics↗

arXiv2018

Graphene Based Adaptive Thermal Camouflage

In nature adaptive coloration has been effectively utilized for concealment and signaling. Various biological mechanisms have evolved that can tune the reflectivity for visible and ultraviolet light. These examples inspire many artificial systems for mimicking adaptive coloration to match the visual appearance to their surroundings. Thermal camouflage, however, has been an outstanding challenge which requires an ability to control of the emitted thermal radiation from the surface. Here we report a new class of active thermal surfaces capable of efficient real-time electrical-control of thermal emission over the full infrared (IR) spectrum without changing the temperature of the surface. Our approach relies on electro-modulation of IR absorptivity and emissivity of multilayer graphene via reversible intercalation of nonvolatile ionic liquids. The demonstrated devices are light (30 g/m2), thin (<50 um) and ultra-flexible which can conformably coat their environment. In addition, combining active thermal surfaces with a feedback mechanism, we demonstrate realization of an adaptive thermal camouflage system which can reconfigure its thermal appearance and blend itself with the thermal background in a few seconds. Furthermore, we show that these devices can disguise hot objects as cold and cold ones as hot in a thermal imaging system. We anticipate that, the electrical control of thermal radiation will impact on a variety of new technologies ranging from adaptive IR optics to heat management for outer space applications.

physics.app-ph↗

arXiv2018

Graphene Based Terahertz Phase Modulators

Electrical control of amplitude and phase of terahertz radiation (THz) is the key technological challenge for high resolution and noninvasive THz imaging. The lack of an active materials and devices hinders the realization of these imaging systems. Here, we demonstrate an efficient terahertz phase and amplitude modulation using electrically tunable graphene devices. Our device structure consists of electrolyte-gated graphene placed at quarter wavelength distance from a reflecting metallic surface. In this geometry, graphene operates as a tunable impedance surface which yields electrically controlled reflection phase. Terahertz time domain reflection spectroscopy reveals the voltage controlled phase modulation of π and the reflection modulation of 50 dB. To show the promises of our approach, we demonstrate a multipixel phase modulator array which operates as a gradient impedance surface.

cond-mat.mtrl-sci↗

arXiv2018

Observation of gate-tunable coherent perfect absorption of terahertz radiation in graphene

We report experimental observation of electrically-tunable coherent perfect absorption (CPA) of terahertz (THz) radiation in graphene. We develop a reflection-type tunable THz cavity formed by a large-area graphene layer, a metallic reflective electrode and an electrolytic medium in between. Ionic gating in the THz cavity allows us to tune the Fermi energy of graphene up to 1eV and to achieve critical coupling condition at 2.8 THz with absorption of 99%. With the enhanced THz absorption, we were able to measure the Fermi energy dependence of the transport scattering time of highly doped graphene. Furthermore, we demonstrate flexible active THz surfaces that yield large modulation in the THz reflectivity with low insertion losses. We anticipate that the gate-tunable CPA will lead efficient active THz optoelectronics applications.

physics.app-ph↗

arXiv2018

Weighting graphene with QCM to monitor interfacial mass changes

In this Letter, using quartz crystal microbalance (QCM), we experimentally determined the mass density of graphene grown by chemical vapor deposition method. We developed a transfer printing technique to integrate large area single-layer graphene on QCM. By monitoring the resonant frequency of an oscillating quartz crystal loaded with graphene, we were able to measure the mass density of graphene as ~118 ng/cm2, which is significantly larger than the ideal graphene (~76 ng/cm2) mainly due to the presence of wrinkles and organic/inorganic residues on graphene sheets. High sensitivity of quartz crystal resonator allowed us to determine the number of graphene layers in samples. (The technique is very sensitive and able to determine the number of graphene layers in a particular sample.) Besides, we extended our technique to probe interfacial mass variation during adsorption of biomolecules on graphene surface, and plasma-assisted oxidation of graphene. (Besides, we extended our technique to probe interfacial mass variation during adsorption of biomolecules on graphene surface, and plasma-assisted oxidation of graphene.)

cond-mat.mtrl-sci↗

arXiv2018

Controlling phase of microwaves with active graphene surfaces

In this letter, we report a method to control reflection phase of microwaves using electrically tunable graphene devices. The device consists of mutually gated large-area graphene layers placed at a quarter-wave distance from a metallic surface. This device structure yields electrically tunable resonance absorbance and step-like phase shift around the resonance frequency when the impedance of graphene matches with the free space impedance. Electrostatic control of charge density on graphene yields an ability to control both intensity (> 50 dB) and phase (~pi) of the reflected electromagnetic waves with voltage. Furthermore, using the asymmetry of the doping at opposite polarity of the bias voltages, we showed bidirectional phase control with the applied voltage. We anticipate that our results will pave a new directions to control interaction of electromagnetic waves with matter for long wavelengths and could open a new avenue for microwave devices.

physics.app-ph↗

arXiv2018

Graphene Enabled Optoelectronics on Paper

The realization of optoelectronic devices on paper has been an outstanding challenge due to the large surface roughness and incompatible nature of paper with optical materials. Here, we demonstrate a new class of optoelectronic devices on a piece of printing paper using graphene as an electrically reconfigurable optical medium. Our approach relies on electro-modulation of optical properties of multilayer graphene on paper via blocking the interband electronic transitions. The paper based devices yield high optical contrast in the visible spectrum with fast response speed. Pattering graphene into multiple pixels, folding paper into 3-dimensional shapes or printing coloured ink on paper substrates enable us to demonstrate novel optoelectronic devices which cannot be realized with wafer-based techniques.

cond-mat.mtrl-sci↗

arXiv2011

Synthesis of Graphene on Gold

Here we report chemical vapor deposition of graphene on gold surface at ambient pressure. We studied effects of the growth temperature, pressure and cooling process on the grown graphene layers. The Raman spectroscopy of the samples reveals the essential properties of the graphene grown on gold surface. In order to characterize the electrical properties of the grown graphene layers, we have transferred them on insulating substrates and fabricated field effect transistors. Owing to distinctive properties of gold, the ability to grow graphene layers on gold surface could open new applications of graphene in electrochemistry and spectroscopy.

cond-mat.mes-hall↗