arXiv subjects

Osvaldo Simeone

Publications and source records attributed to Osvaldo Simeone.

At least 379 records · Page 21Linked to original sources

arXiv2012

Information Embedding on Actions

The problem of optimal actuation for channel and source coding was recently formulated and solved in a number of relevant scenarios. In this class of models, actions are taken at encoders or decoders, either to acquire side information in an efficient way or to control or probe effectively the channel state. In this paper, the problem of embedding information on the actions is studied for both the source and the channel coding set-ups. In both cases, a decoder is present that observes only a function of the actions taken by an encoder or a decoder of an action-dependent point-to-point link. For the source coding model, this decoder wishes to reconstruct a lossy version of the source being transmitted over the point-to-point link, while for the channel coding problem the decoder wishes to retrieve a portion of the message conveyed over the link. For the problem of source coding with actions taken at the decoder, a single letter characterization of the set of all achievable tuples of rate, distortions at the two decoders and action cost is derived, under the assumption that the mentioned decoder observes a function of the actions non-causally, strictly causally or causally. A special case of the problem in which the actions are taken by the encoder is also solved. A single-letter characterization of the achievable capacity-cost region is then obtained for the channel coding set-up with actions. Examples are provided that shed light into the effect of information embedding on the actions for the action-dependent source and channel coding problems.

cs.IT↗

arXiv2012

On Channels with Action-Dependent States

Action-dependent channels model scenarios in which transmission takes place in two successive phases. In the first phase, the encoder selects an "action" sequence, with the twofold aim of conveying information to the receiver and of affecting in a desired way the state of the channel to be used in the second phase. In the second phase, communication takes place in the presence the mentioned action-dependent state. In this work, two extensions of the original action-dependent channel are studied. In the first, the decoder is interested in estimating not only the message, but also the state sequence within an average per-letter distortion. Under the constraint of common knowledge (i.e., the decoder's estimate of the state must be recoverable also at the encoder) and assuming non-causal state knowledge at the encoder in the second phase, we obtain a single-letter characterization of the achievable rate-distortion-cost trade-off. In the second extension, we study an action-dependent degraded broadcast channel. Under the assumption that the encoder knows the state sequence causally in the second phase, the capacity-cost region is identified. Various examples, including Gaussian channels and a model with a "probing" encoder, are also provided to show the advantage of a proper joint design of the two communication phases.

cs.IT↗

arXiv2012

Source Coding When the Side Information May Be Delayed

For memoryless sources, delayed side information at the decoder does not improve the rate-distortion function. However, this is not the case for more general sources with memory, as demonstrated by a number of works focusing on the special case of (delayed) feedforward. In this paper, a setting is studied in which the encoder is potentially uncertain about the delay with which measurements of the side information are acquired at the decoder. Assuming a hidden Markov model for the sources, at first, a single-letter characterization is given for the set-up where the side information delay is arbitrary and known at the encoder, and the reconstruction at the destination is required to be (near) lossless. Then, with delay equal to zero or one source symbol, a single-letter characterization is given of the rate-distortion region for the case where side information may be delayed or not, unbeknownst to the encoder. The characterization is further extended to allow for additional information to be sent when the side information is not delayed. Finally, examples for binary and Gaussian sources are provided.

cs.IT↗

arXiv2012

Cascade Source Coding with a Side Information "Vending Machine"

The model of a side information "vending machine" (VM) accounts for scenarios in which the measurement of side information sequences can be controlled via the selection of cost-constrained actions. In this paper, the three-node cascade source coding problem is studied under the assumption that a side information VM is available and the intermediate and/or at the end node of the cascade. A single-letter characterization of the achievable trade-off among the transmission rates, the distortions in the reconstructions at the intermediate and at the end node, and the cost for acquiring the side information is derived for a number of relevant special cases. It is shown that a joint design of the description of the source and of the control signals used to guide the selection of the actions at downstream nodes is generally necessary for an efficient use of the available communication links. In particular, for all the considered models, layered coding strategies prove to be optimal, whereby the base layer fulfills two network objectives: determining the actions of downstream nodes and simultaneously providing a coarse description of the source. Design of the optimal coding strategy is shown via examples to depend on both the network topology and the action costs. Examples also illustrate the involved performance trade-offs across the network.

cs.IT↗

arXiv2012

On the Optimal Scheduling of Independent, Symmetric and Time-Sensitive Tasks

Consider a discrete-time system in which a centralized controller (CC) is tasked with assigning at each time interval (or slot) K resources (or servers) to K out of M>=K nodes. When assigned a server, a node can execute a task. The tasks are independently generated at each node by stochastically symmetric and memoryless random processes and stored in a finite-capacity task queue. Moreover, they are time-sensitive in the sense that within each slot there is a non-zero probability that a task expires before being scheduled. The scheduling problem is tackled with the aim of maximizing the number of tasks completed over time (or the task-throughput) under the assumption that the CC has no direct access to the state of the task queues. The scheduling decisions at the CC are based on the outcomes of previous scheduling commands, and on the known statistical properties of the task generation and expiration processes. Based on a Markovian modeling of the task generation and expiration processes, the CC scheduling problem is formulated as a partially observable Markov decision process (POMDP) that can be cast into the framework of restless multi-armed bandit (RMAB) problems. When the task queues are of capacity one, the optimality of a myopic (or greedy) policy is proved. It is also demonstrated that the MP coincides with the Whittle index policy. For task queues of arbitrary capacity instead, the myopic policy is generally suboptimal, and its performance is compared with an upper bound obtained through a relaxation of the original problem. Overall, the settings in this paper provide a rare example where a RMAB problem can be explicitly solved, and in which the Whittle index policy is proved to be optimal.

math.OC↗

arXiv2012

Robust and Efficient Distributed Compression for Cloud Radio Access Networks

This work studies distributed compression for the uplink of a cloud radio access network where multiple multi-antenna base stations (BSs) are connected to a central unit, also referred to as cloud decoder, via capacity-constrained backhaul links. Since the signals received at different BSs are correlated, distributed source coding strategies are potentially beneficial, and can be implemented via sequential source coding with side information. For the problem of compression with side information, available compression strategies based on the criteria of maximizing the achievable rate or minimizing the mean square error are reviewed first. It is observed that, in either case, each BS requires information about a specific covariance matrix in order to realize the advantage of distributed source coding. Since this covariance matrix depends on the channel realizations corresponding to other BSs, a robust compression method is proposed for a practical scenario in which the information about the covariance available at each BS is imperfect. The problem is formulated using a deterministic worst-case approach, and an algorithm is proposed that achieves a stationary point for the problem. Then, BS selection is addressed with the aim of reducing the number of active BSs, thus enhancing the energy efficiency of the network. An optimization problem is formulated in which compression and BS selection are performed jointly by introducing a sparsity-inducing term into the objective function. An iterative algorithm is proposed that is shown to converge to a locally optimal point. From numerical results, it is observed that the proposed robust compression scheme compensates for a large fraction of the performance loss induced by the imperfect statistical information. Moreover, the proposed BS selection algorithm is seen to perform close to the more complex exhaustive search solution.

cs.IT↗

arXiv2012

Energy-Efficient Sensing and Communication of Parallel Gaussian Sources

Energy efficiency is a key requirement in the design of wireless sensor networks. While most theoretical studies only account for the energy requirements of communication, the sensing process, which includes measurements and compression, can also consume comparable energy. In this paper, the problem of sensing and communicating parallel sources is studied by accounting for the cost of both communication and sensing. In the first formulation of the problem, the sensor has a separate energy budget for sensing and a rate budget for communication, while, in the second, it has a single energy budget for both tasks. Assuming that sources with larger variances have lower sensing costs, the optimal allocation of sensing energy and rate that minimizes the overall distortion is derived for the first problem. Moreover, structural results on the solution of the second problem are derived under the assumption that the sources with larger variances are transmitted on channels with lower noise. Closed-form solutions are also obtained for the case where the energy budget is sufficiently large. For an arbitrary order on the variances and costs, the optimal solution to the first problem is also obtained numerically and compared with several suboptimal strategies.

cs.IT↗

arXiv2012

Robust Coding for Lossy Computing with Receiver-Side Observation Costs

An encoder wishes to minimize the bit rate necessary to guarantee that a decoder is able to calculate a symbolwise function of a sequence available only at the encoder and a sequence that can be measured only at the decoder. This classical problem, first studied by Yamamoto, is addressed here by including two new aspects: (i) The decoder obtains noisy measurements of its sequence, where the quality of such measurements can be controlled via a cost-constrained "action" sequence; (ii) Measurement at the decoder may fail in a way that is unpredictable to the encoder, thus requiring robust encoding. The considered scenario generalizes known settings such as the Heegard-Berger-Kaspi and the "source coding with a vending machine" problems. The rate-distortion-cost function is derived and numerical examples are also worked out to obtain further insight into the optimal system design.

cs.IT↗

arXiv2012

Robust Coding for Lossy Computing with Observation Costs

An encoder wishes to minimize the bit rate necessary to guarantee that a decoder is able to calculate a symbol-wise function of a sequence available only at the encoder and a sequence that can be measured only at the decoder. This classical problem, first studied by Yamamoto, is addressed here by including two new aspects: (i) The decoder obtains noisy measurements of its sequence, where the quality of such measurements can be controlled via a cost-constrained "action" sequence, which is taken at the decoder or at the encoder; (ii) Measurement at the decoder may fail in a way that is unpredictable to the encoder, thus requiring robust encoding. The considered scenario generalizes known settings such as the Heegard-Berger-Kaspi and the "source coding with a vending machine" problems. The rate-distortion-cost function is derived in relevant special cases, along with general upper and lower bounds. Numerical examples are also worked out to obtain further insight into the optimal system design.

cs.IT↗

arXiv2012

Two-Way Communication with Energy Exchange

The conventional assumption made in the design of communication systems is that the energy used to transfer information between a sender and a recipient cannot be reused for future communication tasks. A notable exception to this norm is given by passive RFID systems, in which a reader can transfer both information and energy via the transmitted radio signal. Conceivably, any system that exchanges information via the transfer of given physical resources (radio waves, particles, qubits) can potentially reuse, at least part, of the received resources for communication later on. In this paper, a two-way communication system is considered that operates with a given initial number of physical resources, referred to as energy units. The energy units are not replenished from outside the system, and are assumed, for simplicity, to be constant over time. A node can either send an "on" symbol (or "1"), which costs one unit of energy, or an "off" signal (or "0"), which does not require any energy expenditure. Upon reception of a "1" signal, the recipient node "harvests" the energy contained in the signal and stores it for future communication tasks. Inner and outer bounds on the achievable rates are derived, and shown via numerical results to coincide if the number of energy units is large enough.

cs.IT↗

arXiv2012

On Cascade Source Coding with A Side Information "Vending Machine"

The model of a side information "vending machine" accounts for scenarios in which acquiring side information is costly and thus should be done efficiently. In this paper, the three-node cascade source coding problem is studied under the assumption that a side information vending machine is available either at the intermediate or at the end node. In both cases, a single-letter characterization of the available trade-offs among the rate, the distortions in the reconstructions at the intermediate and at the end node, and the cost in acquiring the side information are derived under given conditions.

cs.IT↗

arXiv2012

Dynamic Compression-Transmission for Energy-Harvesting Multihop Networks with Correlated Sources

Energy-harvesting wireless sensor networking is an emerging technology with applications to various fields such as environmental and structural health monitoring. A distinguishing feature of wireless sensors is the need to perform both source coding tasks, such as measurement and compression, and transmission tasks. It is known that the overall energy consumption for source coding is generally comparable to that of transmission, and that a joint design of the two classes of tasks can lead to relevant performance gains. Moreover, the efficiency of source coding in a sensor network can be potentially improved via distributed techniques by leveraging the fact that signals measured by different nodes are correlated. In this paper, a data gathering protocol for multihop wireless sensor networks with energy harvesting capabilities is studied whereby the sources measured by the sensors are correlated. Both the energy consumptions of source coding and transmission are modeled, and distributed source coding is assumed. The problem of dynamically and jointly optimizing the source coding and transmission strategies is formulated for time-varying channels and sources. The problem consists in the minimization of a cost function of the distortions in the source reconstructions at the sink under queue stability constraints. By adopting perturbation-based Lyapunov techniques, a close-to-optimal online scheme is proposed that has an explicit and controllable trade-off between optimality gap and queue sizes. The role of side information available at the sink is also discussed under the assumption that acquiring the side information entails an energy cost. It is shown that the presence of side information can improve the network performance both in terms of overall network cost function and queue sizes.

cs.IT↗

arXiv2012

Degraded Broadcast Diamond Channels with Non-Causal State Information at the Source

A state-dependent degraded broadcast diamond channel is studied where the source-to-relays cut is modeled with two noiseless, finite-capacity digital links with a degraded broadcasting structure, while the relays-to-destination cut is a general multiple access channel controlled by a random state. It is assumed that the source has non-causal channel state information and the relays have no state information. Under this model, first, the capacity is characterized for the case where the destination has state information, i.e., has access to the state sequence. It is demonstrated that in this case, a joint message and state transmission scheme via binning is optimal. Next, the case where the destination does not have state information, i.e., the case with state information at the source only, is considered. For this scenario, lower and upper bounds on the capacity are derived for the general discrete memoryless model. Achievable rates are then computed for the case in which the relays-to-destination cut is affected by an additive Gaussian state. Numerical results are provided that illuminate the performance advantages that can be accrued by leveraging non-causal state information at the source.

cs.IT↗

arXiv2012

Relay Channel with Orthogonal Components and Structured Interference Known at the Source

A relay channel with orthogonal components that is affected by an interference signal that is noncausally available only at the source is studied. The interference signal has structure in that it is produced by another transmitter communicating with its own destination. Moreover, the interferer is not willing to adjust its communication strategy to minimize the interference. Knowledge of the interferer's signal may be acquired by the source, for instance, by exploiting HARQ retransmissions on the interferer's link. The source can then utilize the relay not only for communicating its own message, but also for cooperative interference mitigation at the destination by informing the relay about the interference signal. Proposed transmission strategies are based on partial decode-and-forward (PDF) relaying and leverage the interference structure. Achievable schemes are derived for discrete memoryless models, Gaussian and Ricean fading channels. Furthermore, optimal strategies are identified in some special cases. Finally, numerical results bring insight into the advantages of utilizing the interference structure at the source, relay or destination.

cs.IT↗

arXiv2011

Medium Access Control Protocols for Wireless Sensor Networks with Energy Harvesting

The design of Medium Access Control (MAC) protocols for wireless sensor networks (WSNs) has been conventionally tackled by assuming battery-powered devices and by adopting the network lifetime as the main performance criterion. While WSNs operated by energy-harvesting (EH) devices are not limited by network lifetime, they pose new design challenges due to the uncertain amount of harvestable energy. Novel design criteria are thus required to capture the trade-offs between the potentially infinite network lifetime and the uncertain energy availability. This paper addresses the analysis and design of WSNs with EH devices by focusing on conventional MAC protocols, namely TDMA, Framed-ALOHA (FA) and Dynamic-FA (DFA), and by accounting for the performance trade-offs and design issues arising due to EH. A novel metric, referred to as delivery probability, is introduced to measure the capability of a MAC protocol to deliver the measure of any sensor in the network to the intended destination (or fusion center, FC). The interplay between delivery efficiency and time efficiency (i.e., the data collection rate at the FC), is investigated analytically using Markov models. Numerical results validate the analysis and emphasize the critical importance of accounting for both delivery probability and time efficiency in the design of EH-WSNs.

cs.IT↗

arXiv2011

Energy Management Policies for Energy-Neutral Source-Channel Coding

In cyber-physical systems where sensors measure the temporal evolution of a given phenomenon of interest and radio communication takes place over short distances, the energy spent for source acquisition and compression may be comparable with that used for transmission. Additionally, in order to avoid limited lifetime issues, sensors may be powered via energy harvesting and thus collect all the energy they need from the environment. This work addresses the problem of energy allocation over source acquisition/compression and transmission for energy-harvesting sensors. At first, focusing on a single-sensor, energy management policies are identified that guarantee a maximal average distortion while at the same time ensuring the stability of the queue connecting source and channel encoders. It is shown that the identified class of policies is optimal in the sense that it stabilizes the queue whenever this is feasible by any other technique that satisfies the same average distortion constraint. Moreover, this class of policies performs an independent resource optimization for the source and channel encoders. Analog transmission techniques as well as suboptimal strategies that do not use the energy buffer (battery) or use it only for adapting either source or channel encoder energy allocation are also studied for performance comparison. The problem of optimizing the desired trade-off between average distortion and delay is then formulated and solved via dynamic programming tools. Finally, a system with multiple sensors is considered and time-division scheduling strategies are derived that are able to maintain the stability of all data queues and to meet the average distortion constraints at all sensors whenever it is feasible.

cs.IT↗

arXiv2011

Message and State Cooperation in a Relay Channel When the Relay Has Strictly Causal State Information

A state-dependent relay channel is studied in which strictly causal channel state information is available at the relay and no state information is available at the source and destination. Source and relay are connected via two unidirectional out-of-band orthogonal links of finite capacity, and a state-dependent memoryless channel connects source and relay, on one side, and the destination, on the other. Via the orthogonal links, the source can convey information about the message to be delivered to the destination to the relay while the relay can forward state information to the source. This exchange enables cooperation between source and relay on both transmission of message and state information to the destination. First, an achievable scheme, inspired by noisy network coding, is proposed that exploits both message and state cooperation. Next, based on the given achievable rate and appropriate upper bounds, capacity results are identified for some special cases. Finally, a Gaussian model is studied, along with corresponding numerical results that illuminate the relative merits of state and message cooperation.

cs.IT↗

arXiv2010

Interference Channel with an Out-of-Band Relay

A Gaussian interference channel (IC) with a relay is considered. The relay is assumed to operate over an orthogonal band with respect to the underlying IC, and the overall system is referred to as IC with an out-of-band relay (IC-OBR). The system can be seen as operating over two parallel interference-limited channels: The first is a standard Gaussian IC and the second is a Gaussian relay channel characterized by two sources and destinations communicating through the relay without direct links. We refer to the second parallel channel as OBR Channel (OBRC). The main aim of this work is to identify conditions under which optimal operation, in terms of the capacity region of the IC-OBR, entails either signal relaying and/or interference forwarding by the relay, with either a separable or non-separable use of the two parallel channels, IC and OBRC. Here "separable" refers to transmission of independent information over the two constituent channels. For a basic model in which the OBRC consists of four orthogonal channels from sources to relay and from relay to destinations (IC-OBR Type-I), a condition is identified under which signal relaying and separable operation is optimal. When this condition is not satisfied, various scenarios are identified in which interference forwarding and non-separable operation are necessary to achieve optimal performance. In these scenarios, the system exploits the "excess capacity" on the OBRC via interference forwarding to drive the IC-OBR system in specific interference regimes (strong or mixed). The analysis is then turned to a more complex IC-OBR, in which the OBRC consists of only two orthogonal channels, one from sources to relay and one from relay to destinations (IC-OBR Type-II). For this channel, some capacity resuls are derived that parallel the conclusions for IC-OBR Type-I.

cs.IT↗