arXiv subjects

Ove Edfors

Publications and source records attributed to Ove Edfors.

At least 19 recordsLinked to original sources

arXiv2026

Trade-Offs in Decentralized Gigantic MIMO with Hard-Boundary Constraints

To maintain the antenna apertures offered by 5G massive MIMO systems operating at the sub-6GHz band, known as FR1, 6G base stations (BSs) using the upper-mid band, FR3, should increase the number of antennas by a factor 4-8, giving rise to gigantic MIMO. This poses challenges in terms of processing complexity and interconnection bandwidth. The WAX framework, previously introduced for exploring trade-offs in decentralized architectures, may offer the flexibility needed to tackle these challenges. However, no results have been established on the applicability of this framework in the presence of hard-boundary constraints. The current work explores gigantic MIMO implementations based on a novel adaptation of the WAX framework, where the decentralized processing is performed by non-cooperating hardware modules. These modules may be implemented through state-of-the-art massive MIMO baseband units (BBUs). The results show the potential of the proposed framework towards exploiting trade-offs between complexity and performance in practical gigantic MIMO implementations.

eess.SP↗

arXiv2026

Vertical Sub-THz Channel Characterization: Sounder Implementation and Initial Measurements

We present a measurement-based characterization of indoor vertical ceiling-to-ground sub-THz channels in the 136-144 GHz band, motivated by ceiling-mounted radio-unit deployments for future distributed indoor networks. The measurements are performed using a vector network analyzer (VNA)-based channel sounder with a mechanically scanned planar virtual antenna array (VAA) at the receiver, enabling single-input single-output (SISO), small-array single-input multiple-output (SIMO), and large-array SIMO measurements in three indoor environments: an office, a laboratory, and a ventilation room. The small-array and large-array SIMO measurements synthesize 2 X 2 cm and 30 X 1 cm uniform rectangular arrays (URAs), respectively. The results show that the vertical links are generally dominated by a strong Line-of-Sight (LOS) component close to the ceiling-to-ground direction, but with clear environmental differences. The office and laboratory exhibit relatively limited delay dispersion, whereas the ventilation room shows stronger delayed multipath due to its corrugated metallic ceiling and surrounding metallic structures. The measured root mean square (RMS) delay spreads are 0.55-1.74 ns for the small-array measurements and 0.44-2.57 ns for the large-array measurements, smaller than those reported in several horizontal indoor sub-THz measurement campaigns at similar frequencies. However, the channel is not purely free-space. Repeatable second-order reflections involving the receiver table, ceiling, transmitter structure, and ceiling-mounted objects are observed in all environments. The large-array measurements further reveal spatial non-stationarity along the 30 cm aperture, with several multipath components visible only over limited parts of the array. These results show that ceiling materials, obstructions, and aperture-dependent variations matter in vertical sub-THz channel modeling.

eess.SP↗

arXiv2026

Efficient Implementation of an Adaptive Transformer Accelerator for Massive MIMO Outdoor Localization

We present the implementation of an adaptive Transformer-based localization system for 5G massive MIMO targeting sub-10ms real-time positioning. The design exploits propagation characteristics, where beam-delay channel representations exhibit sparsity, enabling a row-wise skipping mechanism that removes low-energy beam components with minimal control overhead. The contribution is focused on hardware realization of the model using a mixed dataflow architecture, combining input- and output-stationary execution, mapped onto a heterogeneous vector processing engine with parallel processing elements and adder trees for efficient matrix computation. Environment-dependent processing is supported through a lightweight runtime model-switching mechanism, where temporally filtered outputs of a single-layer perceptron router enable stable selection between specialized models with reduced latency. Implemented on a Xilinx Zynq UltraScale+ FPGA and evaluated on real-world massive MIMO measurements, the design achieves up to 65% row sparsity, yielding peak computational speedups of approximately 2x while limiting the average localization accuracy degradation to below 10%, relative to the floating-point baseline model. The accelerator attains below 1.15m localization accuracy across scenarios, with inference latency of 0.51-2.11ms and throughput of up to 1961 positions/s. These results demonstrate that propagation-aware sparsity, mixed dataflow execution, and efficient runtime model switching enable a scalable and low-latency hardware realization of adaptive Transformer-based localization for real-time 5G systems.

cs.AR↗

arXiv2026

A Scalable 256-Antenna Distributed MIMO Testbed with Real-Time Fully Digital Beamforming

Distributed massive MIMO (D-MIMO) is a promising technology for future generation wireless systems as it takes advantage of both an increased array aperture and a decentralized processing architecture and topology. In order to truly understand the possibilities and limitations of these approaches in real scenarios, practical realization of testbeds is an essential step in the technology advancement. This work presents the Lund University Large Intelligent Surface testbed -- LuLIS, that can operate up to 256 coherent radio frequency (RF) chains using 16 AMD Zynq UltraScale RFSoC ZCU216 evaluation boards acting as distributed processing nodes. Real-time processing is facilitated by acceleration and distribution of MIMO processing algorithms on the FPGA fabric of the boards. The system is easily scalable, as increasing the number of antennas is done in multiples of 16 by adding more RFSoCs, which also implies addition of another processing node. The design allows up-scaling without hardware redesign, introduction of large latencies or data transfer overhead. The testbed is flexible in terms of deployment, with options of fully distributing the nodes (as in D-MIMO) or co-locating them (as in more traditional Massive MIMO). A detailed description of the implementation of the testbed is presented and initial results are shown for an uplink (UL) transmission from four single-antenna user equipments (UEs) to 64, 128 and 256 base-station antennas.

eess.SP↗

arXiv2026

Multi-User XR Offloading via Massive MIMO: A System-Level Analysis using a Real-Life Dataset

SLAM is one of the biggest bottlenecks of XR devices, which have strict requirements for latency, power consumption, and user satisfaction. A solution that has been proposed and studied to meet the requirements is to offload SLAM to a remote server, which leverages computational hardware but may suffer due to incurred delays and transmission power. In this work, we propose offloading SLAM using Massive MIMO, which is attractive due to lower latencies, transmission power, and a more reliable link for multiple users. A framework for system-level analysis of latency and localisation error in multi-user offloaded XR with Massive MIMO has been proposed, and a case study with varying system-level parameters has been performed with it. The case study showed that there are important trade-offs between latency, localisation error, and device transmission power. We find that Massive MIMO is a promising technology for XR offloading, but that further evaluations including complete device power consumption are needed to get the full picture.

eess.SP↗

arXiv2025

Zero-Forcing MU-MIMO Precoding under Power Amplifier Non-Linearities

In multi-user multiple-input multiple-output (MU-MIMO) systems, the non-linear behavior of the power amplifiers (PAs) may cause degradation of the linear precoding schemes dealing with interference between user equipments (UEs), e.g., the zero-forcing (ZF) precoder. One way to minimize this effect is to use digital-pre-distortion (DPD) modules to linearize the PAs. However, using perfect DPD modules is costly and it may incur significant power consumption. As an alternative, we consider the problem of characterizing non-linearity-aware ZF (NLA-ZF) precoding schemes, hereby defined as linear precoders that achieve perfect interference cancellation in the presence of PA non-linearity by exploiting knowledge of this non-linear response. We provide initial iterative solutions that allow achieving NLA-ZF (up to adjustable tolerance) in a two-UE downlink MU-MIMO scenario where the base station (BS) has an even number of antennas, and each antenna is connected to a PA exhibiting third-order memory-less non-linear behavior. The proposed approach allows for performance gains in scenarios with significant residual interference.

eess.SP↗

arXiv2025

Highly Parallel Singular Value Decomposition for Low-Latency MIMO Processing

Singular value decomposition (SVD) is widely used in wireless systems, including multiple-input multiple-output (MIMO) processing and dimension reduction in distributed MIMO (D-MIMO). However, the iterative nature of decomposition methods results in increased execution time as system size grows, posing challenges for real-time and low-latency applications. To address this, we analyze the latency of state-of-art SVD methods, and highlight the efficiency of a 4-step highly parallel method based on Gram matrix tridiagonalization. Furthermore, we develop a time complexity (processing latency) analysis framework with hardware profiling, allowing scalable and realistic evaluation without full implementation. The numerical results demonstrate the superior time efficiency of the selected parallel method, particularly in massive MIMO scenarios.

eess.SP↗

arXiv2025

Low-latency D-MIMO Localization using Distributed Scalable Message-Passing Algorithm

Distributed MIMO and integrated sensing and communication are expected to be key technologies in future wireless systems, enabling reliable, low-latency communication and accurate localization. Dedicated localization solutions must support distributed architecture, provide scalability across different system configurations and meet strict latency requirements. We present a scalable message-passing localization method and architecture co-designed for a panel-based distributed MIMO system and network topology, in which interconnected units operate without centralized processing. This method jointly detects line-of-sight paths to distributed units from multipath measurements in dynamic scenarios, localizes the agent, and achieves very low latency. Additionally, we introduce a cycle-accurate system latency model based on implemented FPGA operations, and show important insights into processing latency and hardware utilization and system-level trade-offs. We compare our method to a multipath-based localization method and show that it can achieve similar localization performance, with wide enough distribution of array elements, while offering lower latency and computational complexity.

eess.SP↗

arXiv2025

Adaptive Attention-Based Model for 5G Radio-based Outdoor Localization

Radio-based localization in dynamic environments, such as urban and vehicular settings, requires systems that efficiently adapt to varying signal conditions and environmental changes. Factors like multipath interference and obstructions introduce different levels of complexity that affect the accuracy of the localization. Although generalized models offer broad applicability, they often struggle to capture the nuances of specific environments, leading to suboptimal performance in real-world deployments. In contrast, specialized models can be tailored to particular conditions, enabling more precise localization by effectively handling domain-specific variations, which also results in reduced execution time and smaller model size. However, deploying multiple specialized models requires an efficient mechanism to select the most appropriate one for a given scenario. In this work, we develop an adaptive localization framework that combines shallow attention-based models with a router/switching mechanism based on a single-layer perceptron. This enables seamless transitions between specialized localization models optimized for different conditions, balancing accuracy and computational complexity. We design three low-complex models tailored for distinct scenarios, and a router that dynamically selects the most suitable model based on real-time input characteristics. The proposed framework is validated using real-world vehicle localization data collected from a massive MIMO base station and compared to more general models.

eess.SP↗

arXiv2025

Accelerator-assisted Floating-point ASIP for Communication and Positioning in Massive MIMO Systems

This paper presents an implementation of a floating-point-capable application-specific instruction set processor (ASIP) for both communication and positioning tasks using the massive multiple-input multiple-output (MIMO) technology. The ASIP is geared with vector processing capabilities in the form of single instruction multiple data (SIMD). A dual-pronged accelerator composition assists the processor to tame the heavier mathematical workloads. A standalone systolic array accelerator accompanies the processor to aid with matrix multiplications. A parallel vector memory subsystem provides functionalities to both the processor and the systolic array. Additionally, A convolutional neural network (CNN) module accelerator, which is paired with its own separate vector memory, works hand in glove with the processor to take on the positioning task. The processor is synthesized in 22 nm fully depleted silicon-on-insulator (FD-SOI) technology running at a clock frequency of 800 MHz. The system achieves a maximum detection throughput of 2.1 Gb/s in a 128x16 massive MIMO system for the user equipment (UE) speed of 50km/h. The localization throughput settles at around 390 positionings/s.

cs.AR↗

arXiv2025

Hardware Distortion Modeling for Panel Selection in Large Intelligent Surfaces

Hardware distortion in large intelligent surfaces (LISs) may limit their performance when scaling up such systems. It is of great importance to model the non-ideal effects in their transceivers to study the hardware distortions that can affect their performance. Therefore, we have focused on modeling and studying the effects of nonlinear RX-chains in LISs. We first derive expressions for SNDR of a LIS with a memory-less polynomial-based model at its RX-chains. Then we propose a simplified double-parameter exponential model for the distortion power and show that compared to the polynomial based model, the exponential model can improve the analytical tractability for SNDR optimization problems. In particular, we consider a panel selection optimization problems in a panel-based LIS scenario and show that the proposed model enables us to derive two closed-form sub-optimal solutions for panel selection, and can be a favorable alternative to high-order polynomial models in terms of computation complexity, especially for theoretical works on hardware distortion in MIMO and LIS systems. Numerical results show that the sub-optimal closed-form solutions have a near-optimal performance in terms of SNDR compared to the global optimum found by high-complexity heuristic search methods.

eess.SP↗

arXiv2025

Decentralized Multi-Antenna Architectures with Unitary Constraints

The increase in the number of base station (BS) antennas calls for efficient solutions to deal with the increased interconnection bandwidth and processing complexity of traditional centralized approaches. Decentralized approaches are thus gaining momentum, since they achieve important reductions in data/processing volume by preprocessing the received signals before forwarding them to a central node. The WAX framework offers a general description of decentralized architectures with arbitrary interplay between interconnection bandwidth and decentralized processing complexity, but the applicability of this framework has only been studied assuming unrestricted baseband processing. We consider an adaptation of the WAX framework where the decentralized processing has unitary restriction, which allows for energy-efficient implementations based on reconfigurable impedance networks at the cost of some performance loss. Moreover, we propose an effective method to minimize the performance gap with respect to centralized processing. The previous method gives a first step towards characterizing the information-lossless trade-off between interconnection bandwidth and processing complexity in decentralized architectures with unitary constraints.

eess.SP↗

arXiv2024

Spectrum Efficiency and Processing Latency Trade-offs in Panel-Based LIS

The next generation wireless systems will face stringent new requirements, including ultra-low latency, high data rates and enhanced reliability. Large Intelligent Surfaces, is one proposed solution that has the potential to solve these high demands. The real-life deployment of such systems involves different design considerations with non-trivial trade-offs. This paper investigates the trade-off between spectral efficiency and processing latency, considering different antenna distribution schemes and detection algorithms. A latency model for the physical layer processing has been developed, using real FPGA and application-specific instruction processor (ASIP) hardware implementation results. Simulation results using an indoor environment show that distributing antennas throughout the scenario improves overall reliability, while the impact from this on latency is limited both when using zero-forcing (ZF) and Minimum Mean Square Error (MMSE) detection. Changing the detection algorithm to maximum-ratio combining (MRC) from ZF or MMSE, however, reduces the latency significantly, even if a larger number of antennas are needed to achieve a similar spectrum efficiency.

eess.SP↗

arXiv2024

Over-the-Air DPD and Reciprocity Calibration in Massive MIMO and Beyond

Non-linear transceivers and non-reciprocity of downlink and uplink channels are two major challenges in the deployment of massive multiple-input-multiple-output (MIMO) systems. We consider an over-the-air (OTA) approach for digital pre-distortion (DPD) and reciprocity calibration to jointly address these issues. In particular, we consider a memory-less non-linearity model for the base station (BS) transmitters, and we propose a method to perform both linearization and reciprocity calibration based on mutual coupling OTA measurements between BS antennas. We show that, by using only the OTA-based data, we can linearize the transmitters and design the calibration to compensate for both the non-linearity and non-reciprocity of BS transceivers. This allows alleviating the requirement to have dedicated hardware modules for transceiver linearization. Moreover, the proposed reciprocity calibration method is solely based on closed-form linear transformations, achieving a significant complexity reduction over state-of-the-art reciprocity methods, which assume linear transceivers, and rely on iterative methods. Simulation results showcase the potential of our approach in terms of the calibration matrix estimation error and downlink data-rates when applying zero-forcing (ZF) precoding after using our OTA-based DPD and reciprocity calibration method.

eess.SP↗

arXiv2024

Large Intelligent Surfaces with Low-End Receivers: From Scaling to Antenna and Panel Selection

Feasibility of the promising large intelligent surface (LIS) concept, as well as its scalability, relies on the use of low-cost hardware components, raising concerns about the effects of hardware distortion. We analyze LIS systems with receive-chain (RX-chain) hardware distortion, showing how it may limit performance gains when scaling up these systems. In particular, using the memory-less polynomial model, analytical expressions are derived for the signal to noise plus distortion ratio (SNDR) after applying maximum ratio combining (MRC). We also study the effect of back-off and automatic gain control on the RX-chains. The derived expressions enable us to evaluate the scalability of LIS when hardware impairments are present. The cost of assuming ideal hardware is further analyzed by quantifying the minimum scaling required to achieve the same performance with non-ideal hardware. The analytical expressions derived in this work are also used to propose practical antenna selection schemes for LIS, and we show that such schemes can improve the performance significantly leading to increased energy efficiency. Specifically, by turning off RX-chains with lower contribution to the post-MRC SNDR, we can reduce the energy consumption while maintaining performance. We also consider a more practical scenario where the LIS is deployed as a grid of multi-antenna panels, and we propose panel selection schemes to optimize the complexity-performance trade-offs and improve the system overall efficiency.

eess.SP↗

arXiv2024

Channel Orthogonalization in Panel-Based LIS

Large intelligent surface (LIS) has gained momentum as a potential 6G-enabling technology that expands the benefits of massive multiple-input multiple-output (MIMO). On the other hand, orthogonal space-division multiplexing (OSDM) may give a promising direction for efficient exploitation of the spatial resources, analogous as what is achieved with orthogonal frequency-division multiplexing (OFDM) in the frequency domain. To this end, we study how to enforce channel orthogonality in a panel-based LIS (P-LIS) scenario. Our proposed method consists of having a subset of active LIS-panels coherently serving a set of users, and another subset of LIS-panels operating in a novel low-power mode by implementing a receive and re-transmit (RRTx) process. This results in an inter-symbol interference (ISI) channel, where we characterize the RRTx processing required to achieve simultaneous orthogonality in time and space. We then employ the remaining degrees of freedom (DoFs) from the orthogonality constraint to minimize the RRTx processing power, where we derive a closed-form global minimizer, allowing for efficient implementation of the proposed scheme.

cs.IT↗

arXiv2024

Channel Orthogonalization with Reconfigurable Surfaces: General Models, Theoretical Limits, and Effective Configuration

We envision a future in which multi-antenna technology effectively exploits the spatial domain as a set of non-interfering orthogonal resources, allowing for flexible resource allocation and efficient modulation/demodulation. We may refer to this paradigm as orthogonal space-division multiplexing (OSDM). On the other hand, reconfigurable intelligent surface (RIS) has emerged as a promising technology which allows shaping the propagation environment for improved performance. This paper studies the ability of three extended types of reconfigurable surface (RS), including the recently proposed beyond diagonal RIS (BD-RIS), to achieve perfectly orthogonal channels in a general multi-user multiple-input multiple-output (MU-MIMO) scenario. We consider practical implementations for the three types of RS consisting of passive components, and obtain the corresponding restrictions on their reconfigurability. We then use these restrictions to derive closed-form conditions and explicit expressions for achieving arbitrary (orthogonal) channels. We also study the problem of exploiting the degrees of freedom (DoFs) from the channel orthogonality constraint to maximize the channel gain while maintaining the passive RS constraints, and we propose some initial methods with satisfying performance. Finally, we provide some channel estimation and RS configuration techniques within this framework, where the computations are assumed to be performed at the BS, and we derive some limits on the amount of overhead required to achieve channel orthogonalization with RSs. The numerical results confirm the theoretical findings, showing that channel orthogonality with passive RSs can be effectively achieved in practical environments as long as the direct channel is not significant with respect to the RS cascaded channel. We thus take some important steps towards realizing OSDM.

cs.IT↗

arXiv2023

6G Radio Testbeds: Requirements, Trends, and Approaches

The proof of the pudding is in the eating - that is why 6G testbeds are essential in the progress towards the next generation of wireless networks. Theoretical research towards 6G wireless networks is proposing advanced technologies to serve new applications and drastically improve the energy performance of the network. Testbeds are indispensable to validate these new technologies under more realistic conditions. This paper clarifies the requirements for 6G radio testbeds, reveals trends, and introduces approaches towards their development.

eess.SP↗