arXiv subjects

Ove Edfors

Publications and source records attributed to Ove Edfors.

At least 55 records · Page 3Linked to original sources

arXiv2018

Fully Decentralized Massive MIMO Detection Based on Recursive Methods

Algorithms for Massive MIMO uplink detection typically rely on a centralized approach, by which baseband data from all antennas modules are routed to a central node in order to be processed. In case of Massive MIMO, where hundreds or thousands of antennas are expected in the base-station, this architecture leads to a bottleneck, with critical limitations in terms of interconnection bandwidth requirements. This paper presents a fully decentralized architecture and algorithms for Massive MIMO uplink based on recursive methods, which do not require a central node for the detection process. Through a recursive approach and very low complexity operations, the proposed algorithms provide a sequence of estimates that converge asymptotically to the zero-forcing solution, without the need of specific hardware for matrix inversion. The proposed solution achieves significantly lower interconnection data-rate than other architectures, enabling future scalability.

eess.SP↗

arXiv2018

Impact of Relay Cooperation on the Performance of Large-scale Multipair Two-way Relay Networks

We consider a multipair two-way relay communication network, where pairs of user devices exchange information via a relay system. The communication between users employs time division duplex, with all users transmitting simultaneously to relays in one time slot and relays sending the processed information to all users in the next time slot. The relay system consists of a large number of single antenna units that can form groups. Within each group, relays exchange channel state information (CSI), signals received in the uplink and signals intended for downlink transmission. On the other hand, per-group CSI and uplink/downlink signals (data) are not exchanged between groups, which perform the data processing completely independently. Assuming that the groups perform zero-forcing in both uplink and downlink, we derive a lower bound for the ergodic sumrate of the described system as a function of the relay group size. By close observation of this lower bound, it is concluded that the sumrate is essentially independent of group size when the group size is much larger than the number of user pairs. This indicates that a very large group of cooperating relays can be substituted by a number of smaller groups, without incurring any significant performance reduction. Moreover, this result implies that relay cooperation is more efficient (in terms of resources spent on cooperation) when several smaller relay groups are used in contrast to a single, large group.

cs.IT↗

arXiv2018

Unmanned Aerial Vehicle Assisted Cellular Communication

In this paper, we consider unmanned aerial vehicles (UAVs) assisted cellular communication system, where UAVs can be used as amplify-and-forward (AF) relays. The effective channel with UAV assisted communication can be modeled as a Rayleigh product-channel, and we derive a tight lower-bound of the ergodic capacity in closed-form. With the obtained lower-bound, trade-offs between the transmit power and the equipped number of antennas of the UAVs can be analyzed. Alternatively, for a giving setting of users and the base-transceiver station (BTS), the needed transmit power and number of antennas for the UAVs can be derived in order to have a higher ergodic capacity with the UAV assisted communication than that without it.

cs.IT↗

arXiv2018

Achievable Rates and Training Overheads for a Measured LOS Massive MIMO Channel

This paper presents achievable uplink (UL) sumrate predictions for a measured line-of-sight (LOS) massive multiple-input, multiple-output (MIMO) (MMIMO) scenario and illustrates the trade-off between spatial multiplexing performance and channel de-coherence rate for an increasing number of base station (BS) antennas. In addition, an orthogonal frequency division multiplexing (OFDM) case study is formed which considers the 90% coherence time to evaluate the impact of MMIMO channel training overheads in high-speed LOS scenarios. It is shown that whilst 25% of the achievable zero-forcing (ZF) sumrate is lost when the resounding interval is increased by a factor of 4, the OFDM training overheads for a 100-antenna MMIMO BS using an LTE-like physical layer could be as low as 2% for a terminal speed of 90m/s.

cs.IT↗

arXiv2017

User Assignment with Distributed Large Intelligent Surface (LIS) Systems

In this paper, we consider a wireless communication system where a large intelligent surface (LIS) is deployed comprising a number of small and distributed LIS-Units. Each LIS-Unit has a separate signal process unit (SPU) and is connected to a central process unit (CPU) that coordinates the behaviors of all the LIS-Units. With such a LIS system, we consider the user assignments both for sum-rate and minimal user-rate maximizations. That is, assuming $M$ LIS-Units deployed in the LIS system, the objective is to select $K$ ($K\!\leq\!M$) best LIS-Units to serve $K$ autonomous users simultaneously. Based on the nice property of effective inter-user interference suppression of the LIS-Units, the optimal user assignments can be effectively found through classical linear assignment problems (LAPs) defined on a bipartite graph. To be specific, the optimal user assignment for sum-rate and user-rate maximizations can be solved by linear sum assignment problem (LSAP) and linear bottleneck assignment problem (LBAP), respectively. The elements of the cost matrix are constructed based on the received signal strength (RSS) measured at each of the $M$ LIS-Units for all the $K$ users. Numerical results show that, the proposed user assignments are close to optimal user assignments both under line-of-sight (LoS) and scattering environments.

cs.IT↗

arXiv2017

Beyond Massive-MIMO: The Potential of Data-Transmission with Large Intelligent Surfaces

In this paper, we consider the potential of data-transmission in a system with a massive number of radiating and sensing elements, thought of as a contiguous surface of electromagnetically active material. We refer to this as a large intelligent surface (LIS). The "LIS" is a newly proposed concept, which conceptually goes beyond contemporary massive MIMO technology, that arises from our vision of a future where man-made structures are electronically active with integrated electronics and wireless communication making the entire environment "intelligent". We consider capacities of single-antenna autonomous terminals communicating to the LIS where the entire surface is used as a receiving antenna array. Under the condition that the surface-area is sufficiently large, the received signal after a matched-filtering (MF) operation can be closely approximated by a sinc-function-like intersymbol interference (ISI) channel. We analyze the capacity per square meter (m^2) deployed surface, \hat{C}, that is achievable for a fixed transmit power per volume-unit, \hat{P}. Moreover, we also show that the number of independent signal dimensions per m deployed surface is 2/λfor one-dimensional terminal-deployment, and π/λ^2 per m^2 for two and three dimensional terminal-deployments. Lastly, we consider implementations of the LIS in the form of a grid of conventional antenna elements and show that, the sampling lattice that minimizes the surface-area of the LIS and simultaneously obtains one signal space dimension for every spent antenna is the hexagonal lattice. We extensively discuss the design of the state-of-the-art low-complexity channel shortening (CS) demodulator for data-transmission with the LIS.

cs.IT↗

arXiv2017

Performance Characterization of a Real-Time Massive MIMO System with LOS Mobile Channels

The first measured results for massive MIMO performance in a line-of-sight (LOS) scenario with moderate mobility are presented, with 8 users served in real-time using a 100-antenna base Station (BS) at 3.7 GHz. When such a large number of channels dynamically change, the inherent propagation and processing delay has a critical relationship with the rate of change, as the use of outdated channel information can result in severe detection and precoding inaccuracies. For the downlink (DL) in particular, a time division duplex (TDD) configuration synonymous with massive multiple-input, multiple-output (MIMO) deployments could mean only the uplink (UL) is usable in extreme cases. Therefore, it is of great interest to investigate the impact of mobility on massive MIMO performance and consider ways to combat the potential limitations. In a mobile scenario with moving cars and pedestrians, the massive MIMO channel is sampled across many points in space to build a picture of the overall user orthogonality, and the impact of both azimuth and elevation array configurations are considered. Temporal analysis is also conducted for vehicles moving up to 29km/h and real-time bit error rates (BERs) for both the UL and DL without power control are presented. For a 100-antenna system, it is found that the channel state information (CSI) update rate requirement may increase by 7 times when compared to an 8-antenna system, whilst the power control update rate could be decreased by at least 5 times relative to a single antenna system.

cs.IT↗

arXiv2017

Beyond Massive-MIMO: The Potential of Positioning with Large Intelligent Surfaces

We consider the potential for positioning with a system where antenna arrays are deployed as a large intelligent surface (LIS), which is a newly proposed concept beyond massive-MIMO where future man-made structures are electronically active with integrated electronics and wireless communication making the entire environment \lq\lq{}intelligent\rq\rq{}. In a first step, we derive Fisher-information and Cramér-Rao lower bounds (CRLBs) in closed-form for positioning a terminal located perpendicular to the center of the LIS, whose location we refer to as being on the central perpendicular line (CPL) of the LIS. For a terminal that is not on the CPL, closed-form expressions of the Fisher-information and CRLB seem out of reach, and we alternatively find approximations of them which are shown to be accurate. Under mild conditions, we show that the CRLB for all three Cartesian dimensions ($x$, $y$ and $z$) decreases quadratically in the surface-area of the LIS, except for a terminal exactly on the CPL where the CRLB for the $z$-dimension (distance from the LIS) decreases linearly in the same. In a second step, we analyze the CRLB for positioning when there is an unknown phase $φ$ presented in the analog circuits of the LIS. We then show that the CRLBs are dramatically increased for all three dimensions but decrease in the third-order of the surface-area. Moreover, with an infinitely large LIS the CRLB for the $z$-dimension with an unknown $φ$ is 6 dB higher than the case without phase uncertainty, and the CRLB for estimating $φ$ converges to a constant that is independent of the wavelength $λ$. At last, we extensively discuss the impact of centralized and distributed deployments of LIS, and show that a distributed deployment of LIS can enlarge the coverage for terminal-positioning and improve the overall positioning performance.

cs.IT↗

arXiv2017

The World's First Real-Time Testbed for Massive MIMO: Design, Implementation, and Validation

This paper sets up a framework for designing a massive multiple-input multiple-output (MIMO) testbed by investigating hardware (HW) and system-level requirements such as processing complexity, duplexing mode and frame structure. Taking these into account, a generic system and processing partitioning is proposed which allows flexible scaling and processing distribution onto a multitude of physically separated devices. Based on the given HW constraints such as maximum number of links and maximum throughput for peer-to-peer interconnections combined with processing capabilities, the framework allows to evaluate modular HW components. To verify our design approach, we present the LuMaMi (Lund University Massive MIMO) testbed which constitutes the first reconfigurable real-time HW platform for prototyping massive MIMO. Utilizing up to 100 base station antennas and more than 50 Field Programmable Gate Arrays, up to 12 user equipments are served on the same time/frequency resource using an LTE-like Orthogonal Frequency Division Multiplexing time-division duplex-based transmission scheme. Proof-of-concept tests with this system show that massive MIMO can simultaneously serve a multitude of users in a static indoor and static outdoor environment utilizing the same time/frequency resource.

cs.IT↗

arXiv2017

Cramér-Rao Lower Bounds for Positioning with Large Intelligent Surfaces

We consider the potential for positioning with a system where antenna arrays are deployed as a large intelligent surface (LIS). We derive Fisher-informations and Cramér-Rao lower bounds (CRLB) in closed-form for terminals along the central perpendicular line (CPL) of the LIS for all three Cartesian dimensions. For terminals at positions other than the CPL, closed-form expressions for the Fisher-informations and CRLBs seem out of reach, and we alternatively provide approximations (in closed-form) which are shown to be very accurate. We also show that under mild conditions, the CRLBs in general decrease quadratically in the surface-area for both the $x$ and $y$ dimensions. For the $z$-dimension (distance from the LIS), the CRLB decreases linearly in the surface-area when terminals are along the CPL. However, when terminals move away from the CPL, the CRLB is dramatically increased and then also decreases quadratically in the surface-area. We also extensively discuss the impact of different deployments (centralized and distributed) of the LIS.

cs.IT↗

arXiv2017

Massive MIMO Performance - TDD Versus FDD: What Do Measurements Say?

Downlink beamforming in Massive MIMO either relies on uplink pilot measurements - exploiting reciprocity and TDD operation, or on the use of a predetermined grid of beams with user equipments reporting their preferred beams, mostly in FDD operation. Massive MIMO in its originally conceived form uses the first strategy, with uplink pilots, whereas there is currently significant commercial interest in the second, grid-of-beams. It has been analytically shown that in isotropic scattering (independent Rayleigh fading) the first approach outperforms the second. Nevertheless there remains controversy regarding their relative performance in practice. In this contribution, the performances of these two strategies are compared using measured channel data at 2.6 GHz.

cs.IT↗

arXiv2017

Temporal Analysis of Measured LOS Massive MIMO Channels with Mobility

The first measured results for massive multiple-input, multiple-output (MIMO) performance in a line-of-sight (LOS) scenario with moderate mobility are presented, with 8 users served by a 100 antenna base Station (BS) at 3.7 GHz. When such a large number of channels dynamically change, the inherent propagation and processing delay has a critical relationship with the rate of change, as the use of outdated channel information can result in severe detection and precoding inaccuracies. For the downlink (DL) in particular, a time division duplex (TDD) configuration synonymous with massive MIMO deployments could mean only the uplink (UL) is usable in extreme cases. Therefore, it is of great interest to investigate the impact of mobility on massive MIMO performance and consider ways to combat the potential limitations. In a mobile scenario with moving cars and pedestrians, the correlation of the MIMO channel vector over time is inspected for vehicles moving up to 29 km/h. For a 100 antenna system, it is found that the channel state information (CSI) update rate requirement may increase by 7 times when compared to an 8 antenna system, whilst the power control update rate could be decreased by at least 5 times relative to a single antenna system.

cs.IT↗

arXiv2017

Reciprocity Calibration for Massive MIMO: Proposal, Modeling and Validation

This paper presents a mutual coupling based calibration method for time-division-duplex massive MIMO systems, which enables downlink precoding based on uplink channel estimates. The entire calibration procedure is carried out solely at the base station (BS) side by sounding all BS antenna pairs. An Expectation-Maximization (EM) algorithm is derived, which processes the measured channels in order to estimate calibration coefficients. The EM algorithm outperforms current state-of-the-art narrow-band calibration schemes in a mean squared error (MSE) and sum-rate capacity sense. Like its predecessors, the EM algorithm is general in the sense that it is not only suitable to calibrate a co-located massive MIMO BS, but also very suitable for calibrating multiple BSs in distributed MIMO systems. The proposed method is validated with experimental evidence obtained from a massive MIMO testbed. In addition, we address the estimated narrow-band calibration coefficients as a stochastic process across frequency, and study the subspace of this process based on measurement data. With the insights of this study, we propose an estimator which exploits the structure of the process in order to reduce the calibration error across frequency. A model for the calibration error is also proposed based on the asymptotic properties of the estimator, and is validated with measurement results.

cs.IT↗

arXiv2017

The Potential of Using Large Antenna Arrays on Intelligent Surfaces

In this paper, we consider capacities of single-antenna terminals communicating to large antenna arrays that are deployed on surfaces. That is, the entire surface is used as an intelligent receiving antenna array. Under the condition that the surface area is sufficiently large, the received signal after matched-filtering (MF) can be well approximated by an intersymbol interference (ISI) channel where channel taps are closely related to a sinc function. Based on such an approximation, we have derived the capacities for both one-dimensional (terminals on a line) and high dimensional (terminals on a plane or in a cube) terminal-deployments. In particular, we analyze the normalized capacity $\bar{\mathcal{C}}$, measured in nats/s/Hz/m$^2$, under the constraint that the transmit power per m$^2$, $\bar{P}$, is fixed. We show that when the user-density increases, the limit of $\bar{\mathcal{C}}$, achieved as the wavelength $λ$ approaches 0, is $\bar{P}/(2N_0)$ nats/s/Hz/m$^2$, where $N_0$ is the spatial power spectral density (PSD) of noise. In addition, we also show that the number of signal dimensions is $2/λ$ per meter deployed surface for the one-dimensional case, and $π/λ^2$ per m$^2$ deployed surface for two and three dimensional terminal-deployments.

cs.IT↗

arXiv2016

An Energy Efficiency Perspective on Massive MIMO Quantization

One of the basic aspects of Massive MIMO (MaMi) that is in the focus of current investigations is its potential of using low-cost and energy-efficient hardware. It is often claimed that MaMi will allow for using analog-to-digital converters (ADCs) with very low resolutions and that this will result in overall improvement of energy efficiency. In this contribution, we perform a parametric energy efficiency analysis of MaMi uplink for the entire base station receiver system with varying ADC resolutions. The analysis shows that, for a wide variety of system parameters, ADCs with intermediate bit resolutions (4 - 10 bits) are optimal in energy efficiency sense, and that using very low bit resolutions results in degradation of energy efficiency.

cs.IT↗

arXiv2016

Improving practical sensitivity of energy optimized wake-up receivers: proof of concept in 65nm CMOS

We present a high performance low-power digital base-band architecture, specially designed for an energy optimized duty-cycled wake-up receiver scheme. Based on a careful wake-up beacon design, a structured wake-up beacon detection technique leads to an architecture that compensates for the implementation loss of a low-power wake-up receiver front-end at low energy and area costs. Design parameters are selected by energy optimization and the architecture is easily scalable to support various network sizes. Fabricated in 65nm CMOS, the digital base-band consumes 0.9uW (V_DD=0.37V) in sub-threshold operation at 250kbps, with appropriate 97% wake-up beacon detection and 0.04% false alarm probabilities. The circuit is fully functional at a minimum V_DD of 0.23V at f_max=5kHz and 0.018uW power consumption. Based on these results we show that our digital base-band can be used as a companion to compensate for front-end implementation losses resulting from the limited wake-up receiver power budget at a negligible cost. This implies an improvement of the practical sensitivity of the wake-up receiver, compared to what is traditionally reported.

cs.IT↗

arXiv2015

Massive MIMO in Real Propagation Environments: Do All Antennas Contribute Equally?

Massive MIMO can greatly increase both spectral and transmit-energy efficiency. This is achieved by allowing the number of antennas and RF chains to grow very large. However, the challenges include high system complexity and hardware energy consumption. Here we investigate the possibilities to reduce the required number of RF chains, by performing antenna selection. While this approach is not a very effective strategy for theoretical independent Rayleigh fading channels, a substantial reduction in the number of RF chains can be achieved for real massive MIMO channels, without significant performance loss. We evaluate antenna selection performance on measured channels at 2.6 GHz, using a linear and a cylindrical array, both having 128 elements. Sum-rate maximization is used as the criterion for antenna selection. A selection scheme based on convex optimization is nearly optimal and used as a benchmark. The achieved sum-rate is compared with that of a very simple scheme that selects the antennas with the highest received power. The power-based scheme gives performance close to the convex optimization scheme, for the measured channels. This observation indicates a potential for significant reductions of massive MIMO implementation complexity, by reducing the number of RF chains and performing antenna selection using simple algorithms.

cs.IT↗

arXiv2015

Massive MIMO performance evaluation based on measured propagation data

Massive MIMO, also known as very-large MIMO or large-scale antenna systems, is a new technique that potentially can offer large network capacities in multi-user scenarios. With a massive MIMO system, we consider the case where a base station equipped with a large number of antenna elements simultaneously serves multiple single-antenna users in the same time-frequency resource. So far, investigations are mostly based on theoretical channels with independent and identically distributed (i.i.d.) complex Gaussian coefficients, i.e., i.i.d. Rayleigh channels. Here, we investigate how massive MIMO performs in channels measured in real propagation environments. Channel measurements were performed at 2.6 GHz using a virtual uniform linear array (ULA) which has a physically large aperture, and a practical uniform cylindrical array (UCA) which is more compact in size, both having 128 antenna ports. Based on measurement data, we illustrate channel behavior of massive MIMO in three representative propagation conditions, and evaluate the corresponding performance. The investigation shows that the measured channels, for both array types, allow us to achieve performance close to that in i.i.d. Rayleigh channels. It is concluded that in real propagation environments we have characteristics that can allow for efficient use of massive MIMO, i.e., the theoretical advantages of this new technology can also be harvested in real channels.

cs.IT↗