arXiv subjects

Péter Dusán Ispánovity

Publications and source records attributed to Péter Dusán Ispánovity.

At least 19 recordsLinked to original sources

arXiv2026

Dislocation distribution near a wall within the framework of the continuum theory of curved dislocations

A recently proposed generalised continuum theory of curved dislocations describes the spatial and temporal evolution of statistically stored and geometrically necessary dislocation densities as well as the curvature. The dynamics follow from a scalar plastic potential that constrains the allowed velocity fields and leads to a phase field like formulation with a nontrivial mobility function. Although conceptually related to strain gradient plasticity, the theory differs by introducing an intrinsic, evolving length scale given by the dislocation spacing. In this paper, we determine three key material independent parameters of this continuum theory by quantitatively comparing its predictions with discrete dislocation dynamics (DDD) simulations. To achieve this, we impose a narrow impenetrable wall inside the simulation volume, which blocks dislocation motion and generates characteristic spatial variations of the dislocation density fields under external loading. We show that for this geometry, the continuum equations reduce to a form that can be solved efficiently via direct numerical integration. The resulting stationary distributions of total and geometrically necessary dislocation densities are then compared to extensive 2D and 3D DDD simulations. This comparison allows us to extract the parameters that govern the back stress, the density gradient coupling, and the flow stress relation. Our results demonstrate that the continuum theory quantitatively captures the DDD observed structure of the dislocation pile up near the wall and therefore provides a reliable mesoscale description. The wall loading setup further serves as a benchmark problem to validate numerical implementations of the continuum theory in more general geometries.

cond-mat.mtrl-sci↗

arXiv2025

Dislocation Dynamics and Shape in High Entropy Alloys: the Influence of Stress Correlations, Long-Range Interactions and Anisotropy

High entropy alloys gained significant scientific interest in recent years due to their enhanced mechanical properties including high yield strength combined with outstanding ductility. The strength of these materials originates from their highly heterogeneous pinning stress fields that hinder dislocation glide, that is, plastic deformation. This work investigates how the correlations and the anisotropy of the pinning stresses, and the long-range nature and the anisotropy of dislocation interactions influence the propagation of dislocations and the depinning transition in these alloys. Furthermore, it is studied how the impact of these factors manifest in the shape of dislocations. The implications to the wider scope of generic disordered systems and to possible experimental applications are also discussed.

cond-mat.mtrl-sci↗

arXiv2025

Strain rate sensitivity of a Cu/Al$_2$O$_3$ multi-layered thin film

To study the size and strain rate dependency of copper polycrystalline microstructures, a multi-layered copper/Al$_2$O$_3$ thin film was deposited on a Si substrate using a hybrid deposition system (combining physical vapour and atomic layer deposition). High temperature treatment was applied on the ``As Deposited" material with ultrafine-grained structure to increase the average grain size, resulting in a ``Heat Treated" state with microcrystalline structure. Focused ion beam milling was employed to create square shaped micropillars with two different sizes, that were subjected to compressive loading at various (0.001/s -- 1000/s) strain rates. Differences in the strain rate sensitivity behavior manifesting at low and high strain rates are discussed in the context of the pillar diameters and the grain size of the deformed samples. The Al$_2$O$_3$ interlayer studied by transmission electron microscopy showed excellent thermal stability and grain boundary pinning by precipitation, also resulting in the homogeneous deformation of the pillars and preventing shear localization. Geometrically necessary dislocation densities estimated by high (angular) resolution electron backscatter diffraction presented inhomogeneous dislocation distribution within the deformed pillar volumes, that is attributed to the proximity of the sample edges. Finally, the Al$_2$O$_3$ interlayers successfully suppressed any possible recrystallization processes, contributing to the excellent film stability, that makes the proposed coating ideal to be operating under extreme conditions.

cond-mat.mtrl-sci↗

arXiv2024

Deciphering Acoustic Emission with Machine Learning

Acoustic emission signals have been shown to accompany avalanche-like events in materials, such as dislocation avalanches in crystalline solids, collapse of voids in porous matter or domain wall movement in ferroics. The data provided by acoustic emission measurements is tremendously rich, but it is rather challenging to precisely connect it to the characteristics of the triggering avalanche. In our work we propose a machine learning based method with which one can infer microscopic details of dislocation avalanches in micropillar compression tests from merely acoustic emission data. As it is demonstrated in the paper, this approach is suitable for the prediction of the force-time response as it can provide outstanding prediction for the temporal location of avalanches and can also predict the magnitude of individual deformation events. Various descriptors (including frequency dependent and independent ones) are utilised in our machine learning approach and their importance in the prediction is analysed. The transferability of the method to other specimen sizes is also demonstrated and the possible application in more generic settings is discussed.

eess.SP↗

arXiv2024

Avalanche Dynamics and the Effect of Straining in Dislocation Systems with Quenched Disorder

The plastic deformation of crystalline and other heterogeneous materials often manifests in stochastic intermittent events indicating the criticality of plastic behavior. Previous studies demonstrated that the presence of short-ranged quenched disorder modifies this behavior disrupting long-range static and dynamic correlations consequently localizing dislocation avalanches. However, these observations were mostly confined to relaxed materials devoid of deformation history. In this work our focus is on how straining affects static and dynamic correlations, avalanche dynamics and local yield stresses. We demonstrate that the interplay between severe straining and confining quenched disorder induces critical behavior characterized by dislocation avalanches distinct from those at lower stresses. Namely, near the flow stress many avalanches, even if triggered locally, evolve into events affecting a larger region by exciting small clusters of dislocations all around the sample. This type of avalanches differ from the ones at low strains where plastic events typically consist of one compact cluster of dislocations which is either local or it is already quite extended at the onset of the avalanche. Furthermore, we examine the impact of avalanches on local yield stresses. It is shown in detail in this work that while some statistical features of the local yield thresholds are robust to straining, others are significantly affected by the deformation history.

cond-mat.stat-mech↗

arXiv2024

Micromechanics reveal strain rate dependent transition between dislocation mechanisms in a dual phase high entropy alloy

An equimolar NiCoFeCrGa high entropy alloy having dual-phase homogeneous components was studied, where the constituent phases exhibit distinct mechanical properties. Micropillars with various diameters were created from two differently heat treated samples, then they were compressed at slow strain rates, that revealed the material's limited sensitivity to size. On the other hand, increased strain rate sensitivity at high deformation speeds was observed, that differs substantially depending on the phase composition of the specimen. Dislocations within the two phases were studied by high resolution transmission electron microscopy and high angular resolution electron backscatter diffraction. The performed chemical analysis confirmed that slow cooling during casting create Cr-rich precipitates, that have significant impact on the global strength of the material.

cond-mat.mtrl-sci↗

arXiv2024

On identifying dynamic length scales in crystal plasticity

Materials are often heterogeneous at various length scales, with variations in grain structure, defects, and composition which has a strong influence on the emergent macroscopic plastic behavior. In particular, heterogeneities lead to fluctuations in the plastic response in the form of jerky flow and ubiquitous strain bursts. One of the crucial aspects of plasticity modeling is scale bridging: In order to deliver physically correct crystal plasticity models, one needs to determine relevant microstructural length scales. In this paper we advance the idea that continuum descriptions of dislocation mediated plasticity cannot neglect dynamic correlations related to the avalanche behavior. We present an extensive weakest link analysis of crystal plasticity by means of three-dimensional discrete dislocation dynamics simulations with and without spherical precipitates. We investigate strain bursts and related length scales and conclude that while sufficiently strong obstacles to dislocation motion tend to confine the dislocation avalanches within well-defined sub-volumes, in pure dislocation systems the avalanches may span the system, implying that the dynamic length scale is, in fact, the size of the entire sample. Consequences of this finding on continuum modeling are thoroughly discussed.

cond-mat.mtrl-sci↗

arXiv2023

Irreversible evolution of dislocation pile-ups during cyclic microcantilever bending

In metals geometrically necessary dislocations (GNDs) are generated primarily to accommodate strain gradients and they play a key role in the Bauschinger effect, strain hardening, micron-scale size effects and fatigue. During bending large strain gradients naturally emerge which makes this deformation mode exceptionally suitable to study the evolution of GNDs. Here we present bi-directional bending experiment of a Cu single crystalline microcantilever with in situ characterisation of the dislocation microstructure in terms of high-resolution electron backscatter diffraction (HR-EBSD). The experiments are complemented with dislocation density modelling to provide physical understanding of the collective dislocation phenomena. We find that dislocation pile-ups form around the neutral zone during initial bending, however, these do not dissolve upon reversed loading, rather they contribute to the development of a much more complex GND dominated microstructure. This irreversible process is analysed in detail in terms of the involved Burgers vectors and slip systems to provide an in-depth explanation of the Bauschinger-effect and strain hardening at this scale. We conclude that the most dominant role in this behaviour is played by short-range dislocation interactions.

cond-mat.mtrl-sci↗

arXiv2023

Dynamic Length Scale and Weakest Link Behavior in Crystal Plasticity

Plastic deformation of heterogeneous solid structures is often characterized by random intermittent local plastic events. On the mesoscale this feature can be represented by a spatially fluctuating local yield threshold. Here we study the validity of such an approach and the ideal choice for the size of the representative volume element for crystal plasticity in terms of a discrete dislocation model. We find that the number of links representing possible sources of plastic activity exhibits anomalous (super-extensive) scaling which tends to extensive scaling (often assumed in weakest-link models) if quenched short-range interactions are introduced. The reason is that the interplay between long-range dislocation interactions and short-range quenched disorder destroys scale-free dynamical correlations leading to event localization with a characteristic length-scale. Several methods are presented to determine the dynamic length-scale that can be generalized to other types of heterogeneous materials.

cond-mat.stat-mech↗

arXiv2022

Statistical analysis of dislocation cells in uniaxially deformed copper single crystals

The dislocation microstructure developing during plastic deformation strongly influences the stress-strain properties of crystalline materials. The novel method of high resolution electron backscatter diffraction (HR-EBSD) offers a new perspective to study dislocation patterning. In this work copper single crystals deformed in uniaxial compression were investigated by HR-EBSD, X-ray line profile analysis, and transmission electron microscopy (TEM). With these methods the maps of the internal stress, the Nye tensor, and the geometrically necessary dislocation (GND) density were determined at different load levels. In agreement with the composite model long-range internal stress was directly observed in the cell interiors. Moreover, it is found from the fractal analysis of the GND maps that the fractal dimension of the cell structure is decreasing with increasing average spatial dislocation density fluctuation. It is shown that the evolution of different types of dislocations can be successfully monitored with this scanning electron microscopy based technique.

cond-mat.mtrl-sci↗

arXiv2022

Irradiation-induced strain localization and strain burst suppression investigated by microcompression and concurrent acoustic emission experiments

Plastic deformation of microsamples is characterised by large intermittent strain bursts caused by dislocation avalanches. Here we investigate how ion irradiation affects this phenomenon during single slip single crystal plasticity. To this end, in situ compression of Zn micropillars oriented for basal slip was carried out in a SEM. The unique experimental setup also allowed the concurrent recording of the acoustic emission (AE) signals emitted from the sample during deformation. It was shown that irradiation introduced a homogeneous distribution of basal dislocation loops that lead to hardening of the sample as well as strain softening due to dislocation channeling at larger strains. With the used deformation protocol strain burst sizes were found to be decreased due to channeling. The concurrently recorded AE events were correlated with the strain bursts and their analysis provided additional information of the details of collective dislocation dynamics. It was found that the rate of AE events decreased significantly upon irradiation, however, other statistical properties did not change. This was attributed to the appearance of a new type of plastic events dominated by short-range dislocation-obstacle interactions that cannot be detected by AE sensors.

cond-mat.mtrl-sci↗

arXiv2022

Dislocation Avalanches: Earthquakes on the Micron Scale

Compression experiments on micron-scale specimens and acoustic emission (AE) measurements on bulk samples revealed that the dislocation motion resembles a stick-slip process - a series of unpredictable local strain bursts with a scale-free size distribution. Here we present a unique experimental set-up, which detects weak AE waves of dislocation slip during the compression of Zn micropillars. Profound correlation is observed between the energies of deformation events and the emitted AE signals that, as we conclude, are induced by the collective dissipative motion of dislocations. The AE data also reveal a surprising two-level structure of plastic events, which otherwise appear as a single stress drop. Hence, our experiments and simulations unravel the missing relationship between the properties of acoustic signals and the corresponding local deformation events. We further show by statistical analyses that despite fundamental differences in deformation mechanism and involved length- and time-scales, dislocation avalanches and earthquakes are essentially alike.

cond-mat.mtrl-sci↗

arXiv2020

On the dynamics of curved dislocation ensembles

To develop a dislocation-based statistical continuum theory of crystal plasticity is a major challenge of materials science.During the last two decades such a theory has been developed for the time evolution of a system of parallel edge dislocations. The evolution equations were derived by a systematic coarse-graining of the equations of motion of the individual dislocations and later retrieved from a functional of the dislocation densities and the stress potential by applying the standard formalism of phase field theories. It is, however, a long standing issue if a similar procedure can be established for curved dislocation systems. An important prerequisite for such a theory has recently been established through a density-based kinematic theory of moving curves. In this paper, an approach is presented for a systematic derivation of the dynamics of systems of curved dislocations in a single slip situation. In order to reduce the complexity of the problem a dipole like approximation for the orientation dependent density variables is applied. This leads to a closed set of kinematic evolution equations of total dislocation density, the GND densities, and the so-called curvature density. The analogy of the resulting equations with the edge dislocation model allows one to generalize the phase field formalism and to obtain a closed set of dynamic evolution equations.

cond-mat.mtrl-sci↗

arXiv2020

Microstructure evolution of compressed micropillars investigated by in situ HR-EBSD analysis and dislocation density simulations

With decreasing system sizes, the mechanical properties and dominant deformation mechanisms of metals change. For larger scales, bulk behavior is observed that is characterized by a preservation and significant increase of dislocation content during deformation whereas at the submicron scale very localized dislocation activity as well as dislocation starvation is observed. In the transition regime it is not clear how the dislocation content is built up. This dislocation storage regime and its underlying physical mechanisms are still an open field of research. In this paper, the microstructure evolution of single crystalline copper micropillars with a $\langle1\,1\,0\rangle$ crystal orientation and varying sizes between $1$ to $10\,μ\mathrm{m}$ is analysed under compression loading. Experimental in situ HR-EBSD measurements as well as 3d continuum dislocation dynamics simulations are presented. The experimental results provide insights into the material deformation and evolution of dislocation structures during continuous loading. This is complemented by the simulation of the dislocation density evolution considering dislocation dynamics, interactions, and reactions of the individual slip systems providing direct access to these quantities. Results are presented that show, how the plastic deformation of the material takes place and how the different slip systems are involved. A central finding is, that an increasing amount of GND density is stored in the system during loading that is located dominantly on the slip systems that are not mainly responsible for the production of plastic slip. This might be a characteristic feature of the considered size regime that has direct impact on further dislocation network formation and the corresponding contribution to plastic hardening.

cond-mat.mtrl-sci↗

arXiv2020

3D HR-EBSD characterization of the plastic zone around crack tips in tungsten single crystals at the micron scale

High angular resolution electron backscatter diffraction (HR-EBSD) was coupled with focused ion beam (FIB) slicing to characterize the shape of the plastic zone in terms of geometrically necessary dislocations (GNDs) in W single crystal in 3 dimensions. Cantilevers of similar size with a notch were fabricated by FIB and were deformed inside a scanning electron microscope at different temperatures (21$^{\circ}$C, 100$^{\circ}$C and 200$^{\circ}$C) just above the micro-scale brittle-to-ductile transition (BDT). J-integral testing was performed to analyse crack growth and determine the fracture toughness. At all three temperatures the plastic zone was found to be larger close to the free surface than inside the specimen, similar to macro-scale tension tests. However, at higher temperature, the 3D shape of the plastic zone changes from being localized in front of the crack tip to a butterfly-like distribution, shielding more efficiently the crack tip and inhibiting crack propagation. A comparison was made between two identically deformed samples, which were FIB-sliced from two different directions, to evaluate the reliability of the GND density estimation by HR-EBSD. The analysis of the distribution of the Nye tensor components was used to differentiate between the types of GNDs nucleated in the sample. The role of different types of dislocations in the plastic zone is discussed and we confirm earlier findings that the micro-scale BDT of W is mainly controlled by the nucleation of screw dislocations in front of the crack tip.

cond-mat.mtrl-sci↗

arXiv2019

Investigation of geometrically necessary dislocation structures in compressed Cu micropillars by 3-dimensional HR-EBSD

Mechanical testing of micropillars is a field that involves new physics, as the behaviour of materials is non-deterministic at this scale. To better understand their deformation mechanisms we applied 3-dimensional high angular resolution electron backscatter diffraction (3D HR-EBSD) to reveal the dislocation distribution in deformed single crystal copper micropillars. Identical micropillars (6 um x 6 um x 18 um in size) were fabricated by focused ion beam (FIB) and compressed at room temperature. The deformation process was stopped at different strain levels (~1%, 4% and 10%) to study the evolution of geometrically necessary dislocations (GNDs). Serial slicing with FIB and consecutive HR-EBSD mapping on the (100) side was used to create and compare 3-dimensional maps of the deformed volumes. Average GND densities were calculated for each deformation step. Total dislocation density calculation based on X-ray synchrotron measurements were conducted on the $4\%$ pillar to compare dislocation densities determined by the two complementary methods. Scanning transmission electron microscopy (STEM) and transmission electron microscopy (TEM) images were captured on the 10% pillar to visualize the actual dislocation structure. With the 3D HR-EBSD technique we have studied the geometrically necessary dislocations evolving during the deformation of micropillars. An intermediate behaviour was found at the studied sample size between bulk and nanoscale plasticity: A well-developed dislocation cell structure built up upon deformation but with significantly lower GND density than in bulk. This explains the simultaneous observation of strain hardening and size effect at this scale.

physics.app-ph↗

arXiv2019

An efficient implicit method for discrete dislocation dynamics simulations

Plastic deformation of most crystalline materials is due to the motion of lattice dislocations. Therefore, the simulation of the interaction and dynamics of these defects has become state-of-the-art method to study work hardening, size effects, creep and many other mechanical properties of metallic specimens. Lot of efforts have been made to make the simulations realistic by including specific dislocation mechanisms and the effect of free surfaces. However, less attention has been devoted to the numerical scheme that is used to solve the equations of motion. In this paper we propose a scheme that speeds up simulations by several orders of magnitude. The scheme is implicit because this type is the most efficient one for solving stiff equations that arise due to the long-range nature of dislocation interactions. The numerical results show that the method is not only faster than other approaches at the same numerical precision, but it can also be efficiently applied even without dislocation annihilation. The suggested method significantly increases the achievable volume and/or duration of discrete dislocation dynamics simulations and can be generalized for 3D simulations as well.

cond-mat.mtrl-sci↗

arXiv2019

Micron-scale deformation: a coupled in-situ study of strain bursts and acoustic emission

Plastic deformation of micron-scale crystalline materials differ considerably from bulk ones, because it is characterized by random strain bursts. To obtain a detailed picture about this stochastic phenomenon, micron sized pillars have been fabricated and compressed in the chamber of a SEM. An improved FIB fabrication method is proposed to get non-tapered micro-pillars with a maximum control over their shape. The in-situ compression device developed allows high accuracy sample positioning and force/displacement measurements with high data sampling rate. The collective avalanche-like motion of dislocations appears as stress drops on the stress-strain curve. To confirm that these stress drops are directly related to dislocation activity, and not to some other effect, an acoustic emission transducer has been mounted under the sample to record emitted acoustic activity during strain-controlled compression tests of Al-5\% Mg micro-pillars. The correlation between the stress drops and the acoustic emission signals indicates that indeed dislocation avalanches are responsible for the stochastic character of the deformation process.

cond-mat.mtrl-sci↗