arXiv subjects

Péter L. Várkonyi

Publications and source records attributed to Péter L. Várkonyi.

12 recordsLinked to original sources

arXiv2025

Centroids and equilibrium points of convex bodies

The aim of this note is to survey the results in some geometric problems related to the centroids and the static equilibrium points of convex bodies. In particular, we collect results related to Grünbaum's inequality and the Busemann-Petty centroid inequality, describe classifications of convex bodies based on equilibrium points, and investigate the location and structure of equilibrium points, their number with respect to a general reference point as well as the static equilibrium properties of convex polyhedra.

math.MG↗

arXiv2024

All paths admit trajectoids

In a recent paper published in Nature, Y.I. Sobolev et al. introduced the concept of trajectoids: convex, rigid objects, which roll without slip or spin on a flat plane along a prescribed periodic, unbounded planar path. A geometric construction method applicable to many paths was introduced, and the theory was experimentally verified using objects rolling downwards on slightly inclined planes. The construction method was applicable to many but not all curves. A possible extension of the method (referred to as period-n trajectoids) was also proposed, but the limits of applicability were not clarified. Here, a geometric proof is given for the existence of period-n trajectoids for any sufficiently smooth prescribed curve. A somewhat different proof was recently proposed by O. Muller independently from this work. We also highlight some related geometry problems.

math.DG↗

arXiv2022

Lyapunov stability analysis of rigid body systems with multiple contacts by sums-of-squares programming

Reliable quasi-static object manuipulation and robotic locomotion require verification of the stability of equilibria under rigid contacts and friction. In a recent paper, M. Posa, M. Tobenkin, and R. Tedrake demonstrated that sums-of-squares (SOS) programming can be used to verify Lyapunov stability via Lyapunov's direct method. This test was successfully applied to several simple problems with a single point contact. At the same time it has been found that this method is too conservative for several multi-contact systems. In this paper, an extension of Lyapunov's direct method is proposed, which makes use of several Lyapunov functions, and which allows \emph{temporary} increase of those Lyapunov function along a motion trajectory. The proposed method remains compatible with SOS programming techniques. The improved stability test is successfully applied to a rigid body with 2 point contacts, for which the exact conditions of Lyapunov stability are unknown.

physics.class-ph↗

arXiv2018

Shape of an elastica under growth restricted by friction

We investigate the quasi-static growth of elastic fibers in the presence of dry or viscous friction. An unusual form of destabilization beyond a critical length is described. In order to characterize this phenomenon, a new definition of stability against infinitesimal perturbations over finite time intervals is proposed and a semi-analytical method for the determination of the critical length is developed. The post-critical behavior of the system is studied by using an appropriate numerical scheme based on variational methods. We find post-critical shapes for uniformly distributed as well as for concentrated growth and demonstrate convergence to a figure-8 shape for large lengths when self-crossing is allowed. Comparison with simple physical experiments yields reasonable accuracy of the theoretical predictions.

physics.app-ph↗

arXiv2017

Explaining the elongated shape of 'Oumuamua by the Eikonal abrasion model

The photometry of the minor body with extrasolar origin (1I/2017 U1) 'Oumuamua revealed an unprecedented shape: Meech et al. (2017) reported a shape elongation b/a close to 1/10, which calls for theoretical explanation. Here we show that the abrasion of a primordial asteroid by a huge number of tiny particles ultimately leads to such elongated shape. The model (called the Eikonal equation) predicting this outcome was already suggested in Domokos et al. (2009) to play an important role in the evolution of asteroid shapes.

astro-ph.EP↗

arXiv2017

Imperfections, impacts, and the singularity of Euler's disk

The motion of a rigid, spinning disk on a flat surface ends with a dissipation-induced finite-time singularity. The problem of finding the dominant energy absorption mechanism during the last phase of the motion generated a lively debate during the past two decades. Various candidates including air drag and various types of friction have been considered, nevertheless impacts have not been examined until now. We investigate the effect of impacts caused by geometric imperfections of the disk and of the underlying flat surface, through analysing the dynamics of polygonal disks with unilateral point contacts. Similarly to earlier works, we determine the rate of energy absorption under the assumption of a regular pattern of motion analogous to precession-free motion of a rolling disk. In addition, we demonstrate that the asymptotic stability of this motion depends on parameters of the impact model. In the case of instability, the emerging irregular motion is investigated numerically. We conclude that there exists a range of model parameters (small radii of gyration or small restitution coefficients) in which absorption by impacts dominates all preiously investigated mechanisms during the last phase of motion. Nevertheless the parameter values associated with a homogenous disk on a hard surface are typically not in this range, hence the effect of impacts is in that case not dominant.

physics.class-ph↗

arXiv2017

Zeno chattering of rigid bodies with multiple point contacts

Ideally rigid objects establish sustained contact with one another via complete chatter (a.k.a. Zeno behavior), i.e. an infinite sequence of collisions accumulating in finite time. Alternatively, such systems may also exhibit a finite sequence of collisions followed by separation (sometimes called incomplete chatter). Earlier works concerning the chattering of slender rods in two dimensions determined the exact range of model parameters, where complete chatter is possible. We revisit and slightly extend these results. Then the bulk of the paper examines the chattering of three-dimensional objects with multiple points hitting an immobile plane almost simultaneously. In contrast to rods, the motion of these systems is complex, nonlinear, and sensitive to initial conditions and model parameters due to the possibility of various impact sequences. These difficulties explain why we model this phenomenon as a nondeterministic discrete dynamical system. We simplify the analysis by assuming linearized kinematics, frictionless interaction, by neglecting the effect of external forces, and by investigating objects with rotational symmetry. Application and extension of the theory of common invariant cones of multiple linear operators enable us to find sufficient conditions of the existence of initial conditions, which give rise to complete chatter. Additional analytical and numerical investigations predict that our sufficient conditions are indeed exact, moreover solving a simple eigenvalue problem appears to be enough to judge the possibility of complete chatter. \keywords{contact dynamics \and chattering \and Zeno behavior \and common invariant cone

physics.class-ph↗

arXiv2016

Lyapunov stability of a rigid body with two frictional contacts

Lyapunov stability of a mechanical system means that the dynamic response stays bounded in an arbitrarily small neighborhood of a static equilibrium configuration under small perturbations in positions and velocities. This type of stability is highly desired in robotic applications that involve multiple unilateral contacts. Nevertheless, Lyapunov stability analysis of such systems is extremely difficult, because even small perturbations may result in hybrid dynamics where the solution involves many nonsmooth transitions between different contact states. This paper concerns with Lyapunov stability analysis of a planar rigid body with two frictional unilateral contacts under inelastic impacts, for a general class of equilibrium configurations under a constant external load. The hybrid dynamics of the system under contact transitions and impacts is formulated, and a \Poincare map at two-contact states is introduced. Using invariance relations, this \Poincare map is reduced into two semi-analytic scalar functions that entirely encode the dynamic behavior of solutions under any small initial perturbation. These two functions enable determination of Lyapunov stability or instability for almost any equilibrium state. The results are demonstrated via simulation examples and by plotting stability and instability regions in two-dimensional parameter spaces that describe the contact geometry and external load.

eess.SY↗

arXiv2016

Partial reconstruction of the rotational motion of Philae spacecraft during its landing on comet 67P/Churyumov-Gerasimenko

This paper presents a partial reconstruction of the rotational dynamics of the Philae spacecraft upon landing on comet 67P/Churyumov-Gerasimenko as part of ESA's Rosetta mission. We analyze the motion and the events triggered by the failure to fix the spacecraft to the comet surface at the time of the first touchdown. Dynamic trajectories obtained by numerical simulation of a 7 degree-of-freedom mechanical model of the spacecraft are fitted to directions of incoming solar radiation inferred from in-situ measurements of the electric power provided by the solar panels. The results include a lower bound of the angular velocity of the lander immediately after its first touchdown. Our study also gives insight into the effect of the programmed turn-off of the stabilizing gyroscope after touchdown; the important dynamical consequences of a small collision during Philae's journey; and the probability that a similar landing scenario harms the operability of this type of spacecraft.

physics.class-ph↗

arXiv2016

Dynamics of mechanical systems with multiple sliding contacts: new faces of Painlevé's paradox

We investigate the dynamics of finite degree-of-freedom, planar mechanical systems with multiple sliding, unilateral frictional point contacts. A complete classification of systems with 2 sliding contacts is given. The contact-mode based approach of rigid body mechanics is combined with linear stability analysis using a compliant contact model to determine the feasibility and the stability of every possible contact mode in each class. Special forms of non-stationary contact dynamics including "impact without collision" and "reverse chattering" are also investigated. Many types of solution inconsistency and the indeterminacy are identified and new phenomena related to Painlevé"s non-existence and non-uniqueness paradoxes are discovered. Among others, we show that the non-existence paradox is not fully resolvable by considering impulsive contact forces. These results contribute to a growing body of evidence that rigid body mechanics cannot be developed into a complete and self-consistent theory in the presence of contacts and friction.

physics.class-ph↗

arXiv2012

Neutrally floating objects of density 1/2 in three dimensions

This paper is concerned with the Floating Body Problem of S. Ulam: the existence of objects other than the sphere, which can float in a liquid in any orientation. Despite recent results of F. Wegner pointing towards an affirmative answer, a full proof of their existence is still unavailable. For objects with cylindrical symmetry and density 1/2, the conditions of neutral floating are formulated as an initial value problem, for which a unique solution is predicted in certain cases by a suitable generalization of the Picard-Lindelöf theorem. Numerical integration of the initial value problem provides a rich variety of neutrally floating shapes.

math-ph↗

arXiv2012

Patterns, transitions and the role of leaders in the collective dynamics of a simple robotic flock

We have developed an experimental setup of very simple self-propelled robots to observe collective motion emerging as a result of inelastic collisions only. A circular pool and commercial RC boats were the basis of our first setup, where we demonstrated that jamming, clustering, disordered and ordered motion are all present in such a simple experiment and showed that the noise level has a fundamental role in the generation of collective dynamics. Critical noise ranges and the transition characteristics between the different collective patterns were also examined. In our second experiment we used a real-time tracking system and a few steerable model boats to introduce intelligent leaders into the flock. We demonstrated that even a very small portion of guiding members can determine group direction and enhance ordering through inelastic collisions. We also showed that noise can facilitate and speed up ordering with leaders. Our work was extended with an agent-based simulation model, too, and high similarity between real and simulation results were observed. The simulation results show clear statistical evidence of three states and negative correlation between density and ordered motion due to the onset of jamming. Our experiments confirm the different theoretical studies and simulation results in the literature about collision-based, noise-dependent and leader-driven self-propelled particle systems.

cond-mat.stat-mech↗