arXiv subjects

P. -F. Rocci

Publications and source records attributed to P. -F. Rocci.

6 recordsLinked to original sources

arXiv2024

Euclid: Early Release Observations -- A preview of the Euclid era through a galaxy cluster magnifying lens

We present the first analysis of the Euclid Early Release Observations (ERO) program that targets fields around two lensing clusters, Abell 2390 and Abell 2764. We use VIS and NISP imaging to produce photometric catalogs for a total of $\sim 500\,000$ objects. The imaging data reach a $5\,σ$ typical depth in the range 25.1-25.4 AB in the NISP bands, and 27.1-27.3 AB in the VIS band. Using the Lyman-break method in combination with photometric redshifts, we identify $30$ Lyman-break galaxy (LBG) candidates at $z>6$ and 139 extremely red sources (ERSs), most likely at lower redshift. The deeper VIS imaging compared to NISP means we can routinely identify high-redshift Lyman breaks of the order of $3$ magnitudes, which reduces contamination by brown dwarf stars and low-redshift galaxies. Spectroscopic follow-up campaigns of such bright sources will help constrain both the bright end of the ultraviolet galaxy luminosity function and the quasar luminosity function at $z>6$, and constrain the physical nature of these objects. Additionally, we have performed a combined strong lensing and weak lensing analysis of A2390, and demonstrate how Euclid will contribute to better constraining the virial mass of galaxy clusters. From these data, we also identify optical and near-infrared counterparts of known $z>0.6$ clusters, which exhibit strong lensing features, establishing the ability of Euclid to characterize high-redshift clusters. Finally, we provide a glimpse of Euclid's ability to map the intracluster light out to larger radii than current facilities, enabling a better understanding of the cluster assembly history and mapping of the dark matter distribution. This initial dataset illustrates the diverse spectrum of legacy science that will be enabled by the Euclid survey.

astro-ph.GA↗

arXiv2024

Euclid: ERO -- NISP-only sources and the search for luminous $z=6-8$ galaxies

This paper presents a search for high redshift galaxies from the Euclid Early Release Observations program "Magnifying Lens." The 1.5 deg$^2$ area covered by the twin Abell lensing cluster fields is comparable in size to the few other deep near-infrared surveys such as COSMOS, and so provides an opportunity to significantly increase known samples of rare UV-bright galaxies at $z\approx6-8$ ($M_{\rm UV}\lesssim-22$). Beyond their still uncertain role in reionisation, these UV-bright galaxies are ideal laboratories from which to study galaxy formation and constrain the bright-end of the UV luminosity function. Of the 501994 sources detected from a combined $Y_{\rm E}$, $J_{\rm E}$, and $H_{\rm E}$ NISP detection image, 168 do not have any appreciable VIS/$I_{\rm E}$ flux. These objects span a range in spectral colours, separated into two classes: 139 extremely red sources; and 29 Lyman-break galaxy candidates. Best-fit redshifts and spectral templates suggest the former is composed of both $z\gtrsim5$ dusty star-forming galaxies and $z\approx1-3$ quiescent systems. The latter is composed of more homogeneous Lyman break galaxies at $z\approx6-8$. In both cases, contamination by L- and T-type dwarfs cannot be ruled out with Euclid images alone. Additional contamination from instrumental persistence is investigated using a novel time series analysis. This work lays the foundation for future searches within the Euclid Deep Fields, where thousands more $z\gtrsim6$ Lyman break systems and extremely red sources will be identified.

astro-ph.GA↗

arXiv2024

Euclid: Early Release Observations -- Programme overview and pipeline for compact- and diffuse-emission photometry

The Euclid ERO showcase Euclid's capabilities in advance of its main mission, targeting 17 astronomical objects, from galaxy clusters, nearby galaxies, globular clusters, to star-forming regions. A total of 24 hours observing time was allocated in the early months of operation, engaging the scientific community through an early public data release. We describe the development of the ERO pipeline to create visually compelling images while simultaneously meeting the scientific demands within months of launch, leveraging a pragmatic, data-driven development strategy. The pipeline's key requirements are to preserve the image quality and to provide flux calibration and photometry for compact and extended sources. The pipeline's five pillars are: removal of instrumental signatures; astrometric calibration; photometric calibration; image stacking; and the production of science-ready catalogues for both the VIS and NISP instruments. We report a PSF with a full width at half maximum of 0.16" in the optical and 0.49" in the three NIR bands. Our VIS mean absolute flux calibration is accurate to about 1%, and 10% for NISP due to a limited calibration set; both instruments have considerable colour terms. The median depth is 25.3 and 23.2 AB mag with a SNR of 10 for galaxies, and 27.1 and 24.5 AB mag at an SNR of 5 for point sources for VIS and NISP, respectively. Euclid's ability to observe diffuse emission is exceptional due to its extended PSF nearly matching a pure diffraction halo, the best ever achieved by a wide-field, high-resolution imaging telescope. Euclid offers unparalleled capabilities for exploring the LSB Universe across all scales, also opening a new observational window in the NIR. Median surface-brightness levels of 29.9 and 28.3 AB mag per square arcsec are achieved for VIS and NISP, respectively, for detecting a 10 arcsec x 10 arcsec extended feature at the 1 sigma level.

astro-ph.IM↗

arXiv2015

The DICE calibration project: design, characterization, and first results

We describe the design, operation, and first results of a photometric calibration project, called DICE (Direct Illumination Calibration Experiment), aiming at achieving precise instrumental calibration of optical telescopes. The heart of DICE is an illumination device composed of 24 narrow-spectrum, high-intensity, light-emitting diodes (LED) chosen to cover the ultraviolet-to-near-infrared spectral range. It implements a point-like source placed at a finite distance from the telescope entrance pupil, yielding a flat field illumination that covers the entire field of view of the imager. The purpose of this system is to perform a lightweight routine monitoring of the imager passbands with a precision better than 5 per-mil on the relative passband normalisations and about 3Å on the filter cutoff positions. The light source is calibrated on a spectrophotometric bench. As our fundamental metrology standard, we use a photodiode calibrated at NIST. The radiant intensity of each beam is mapped, and spectra are measured for each LED. All measurements are conducted at temperatures ranging from 0°C to 25°C in order to study the temperature dependence of the system. The photometric and spectroscopic measurements are combined into a model that predicts the spectral intensity of the source as a function of temperature. We find that the calibration beams are stable at the $10^{-4}$ level -- after taking the slight temperature dependence of the LED emission properties into account. We show that the spectral intensity of the source can be characterised with a precision of 3Å in wavelength. In flux, we reach an accuracy of about 0.2-0.5% depending on how we understand the off-diagonal terms of the error budget affecting the calibration of the NIST photodiode. With a routine 60-mn calibration program, the apparatus is able to constrain the passbands at the targeted precision levels.

astro-ph.IM↗

arXiv2012

Improved Photometric Calibration of the SNLS and the SDSS Supernova Surveys

We present a combined photometric calibration of the SNLS and the SDSS supernova survey, which results from a joint effort of the SDSS and the SNLS collaborations. We deliver fluxes calibrated to the HST spectrophotometric star network for large sets of tertiary stars that cover the science fields of both surveys in all photometric bands. We also cross-calibrate directly the two surveys and demonstrate their consistency. For each survey the flat-fielding is revised based on the analysis of dithered star observations. The calibration transfer from the HST spectrophotometric standard stars to the multi-epoch tertiary standard star catalogs in the science fields follows three different paths: observations of primary standard stars with the SDSS PT telescope; observations of Landolt secondary standard stars with SNLS MegaCam instrument at CFHT; and direct observation of faint HST standard stars with MegaCam. In addition, the tertiary stars for the two surveys are cross-calibrated using dedicated MegaCam observations of stripe 82. This overlap enables the comparison of these three calibration paths and justifies using their combination to improve the calibration accuracy. Flat-field corrections have improved the uniformity of each survey as demonstrated by the comparison of photometry in overlapping fields: the rms of the difference between the two surveys is 3 mmag in gri, 4 mmag in z and 8 mmag in u. We also find a remarkable agreement (better than 1%) between the SDSS and the SNLS calibration in griz. The cross-calibration and the introduction of direct calibration observations bring redundancy and strengthen the confidence in the resulting calibration. We conclude that the surveys are calibrated to the HST with a precision of about 0.4% in griz. This precision is comparable to the external uncertainty affecting the color of the HST primary standard stars.

astro-ph.CO↗

arXiv2012

(Sn)DICE: A Calibration System Designed for Wide Field Imagers

Dark Energy studies with type Ia supernovae set very tight constraints on the photometric calibration of the imagers used to detect the supernovae and follow up their flux variations. Among the key challenges is the measurement of the shape and normalization of the instrumental throughput. The DICE system was developed by members of the Supernova Legacy Survey (SNLS), building upon the lessons learnt working with the MegaCam imager. It consists in a very stable light source, placed in the telescope enclosure, and generating compact, conical beams, yielding an almost flat illumination of the imager focal plane. The calibration light is generated by narrow spectrum LEDs selected to cover the entire wavelength range of the imager. It is monitored in real time using control photodiodes. A first DICE demonstrator, SnDICE has been installed at CFHT. A second generation instrument (SkyDICE) has been installed in the enclosure of the SkyMapper telescope. We present the main goals of the project. We discuss the main difficulties encountered when trying to calibrate a wide field imager, such as MegaCam (or SkyMapper) using such a calibrated light source.

astro-ph.IM↗