arXiv subjects

P. B. Sujit

Publications and source records attributed to P. B. Sujit.

At least 19 recordsLinked to original sources

arXiv2026

Multi-Domain Physics-Based MDO of Multirotor UAVs: A Deterministic Framework for Discrete COTS Sizing

Multirotor Unmanned Aerial Vehicle (UAV) design is governed by a tightly coupled system of non-linear equations spanning structural mechanics, electrochemistry, aerodynamics, and kinematics. Solved sequentially, a miscalibrated sub-model coefficient triggers a mass-compounding cascade failure--the Mass Snowball effect. This paper presents AeroEval, a physics-based, Multidisciplinary Design Optimization (MDO) engine that simultaneously resolves all subsystem couplings and maps continuous sizing optima to physically purchasable, commercial off-the-shelf (COTS) components. The MDO engine is validated under a strict calibrate/test protocol that eliminates circularity: three structural/packaging coefficients are fitted on a held-out cohort of 20 do-it-yourself (DIY) and legacy platforms, then frozen and evaluated blind on 19 modern commercial drone platforms spanning 377 g to 76 kg. On the commercial test cohort the engine predicts Maximum Takeoff Weight (MTOW) within 7.2% Mean Absolute Percentage Error (MAPE), with a mean complexity factor $k \approx 1.05 \pm 0.08$ and $\text{RMSE}_{\text{MTOW}} = 1.59$ kg; the DIY calibration cohort, characterized by high build variability, yields 26.1% MAPE. Battery mass is predicted within 7.9% on single-pack platforms, with a disclosed systematic underprediction on redundant multi-battery enterprise platforms. A 14-parameter sensitivity suite of >300 simulations quantifies partial derivatives of takeoff mass and flight time; forward velocity diverges beyond 25.5 m/s due to cubic parasite power growth. The path-dependent mass-shedding model for agricultural and delivery roles reduces structural frame mass by up to 40.6% and energy capacity by 33.7% relative to static baselines. Typical solver convergence requires 25-50 iterations, completing in under 50 ms on a standard desktop CPU.

cs.CE↗

arXiv2025

Multi-robot searching with limited sensing range for static and mobile intruders

We consider the problem of searching for an intruder in a geometric domain by utilizing multiple search robots. The domain is a simply connected orthogonal polygon with edges parallel to the cartesian coordinate axes. Each robot has a limited sensing capability. We study the problem for both static and mobile intruders. It turns out that the problem of finding an intruder is NP-hard, even for a stationary intruder. Given this intractability, we turn our attention towards developing efficient and robust algorithms, namely methods based on space-filling curves, random search, and cooperative random search. Moreover, for each proposed algorithm, we evaluate the trade-off between the number of search robots and the time required for the robots to complete the search process while considering the geometric properties of the connected orthogonal search area.

cs.RO↗

arXiv2025

Event Driven CBBA with Reduced Communication

In various scenarios such as multi-drone surveillance and search-and-rescue operations, deploying multiple robots is essential to accomplish multiple tasks at once. Due to the limited communication range of these vehicles, a decentralised task allocation algorithm is crucial for effective task distribution among robots. The consensus-based bundle algorithm (CBBA) has been promising for multi-robot operation, offering theoretical guarantees. However, CBBA demands continuous communication, leading to potential congestion and packet loss that can hinder performance. In this study, we introduce an event-driven communication mechanism designed to address these communication challenges while maintaining the convergence and performance bounds of CBBA. We demonstrate theoretically that the solution quality matches that of CBBA and validate the approach with Monte-Carlo simulations across varying targets, agents, and bundles. Results indicate that the proposed algorithm (ED-CBBA) can reduce message transmissions by up to 52%.

cs.RO↗

arXiv2025

AnyTraverse: An off-road traversability framework with VLM and human operator in the loop

Off-road traversability segmentation enables autonomous navigation with applications in search-and-rescue, military operations, wildlife exploration, and agriculture. Current frameworks struggle due to significant variations in unstructured environments and uncertain scene changes, and are not adaptive to be used for different robot types. We present AnyTraverse, a framework combining natural language-based prompts with human-operator assistance to determine navigable regions for diverse robotic vehicles. The system segments scenes for a given set of prompts and calls the operator only when encountering previously unexplored scenery or unknown class not part of the prompt in its region-of-interest, thus reducing active supervision load while adapting to varying outdoor scenes. Our zero-shot learning approach eliminates the need for extensive data collection or retraining. Our experimental validation includes testing on RELLIS-3D, Freiburg Forest, and RUGD datasets and demonstrate real-world deployment on multiple robot platforms. The results show that AnyTraverse performs better than GA-NAV and Off-seg while offering a vehicle-agnostic approach to off-road traversability that balances automation with targeted human supervision.

cs.CV↗

arXiv2024

The Persistent Robot Charging Problem for Long-Duration Autonomy

This paper introduces a novel formulation aimed at determining the optimal schedule for recharging a fleet of $n$ heterogeneous robots, with the primary objective of minimizing resource utilization. This study provides a foundational framework applicable to Multi-Robot Mission Planning, particularly in scenarios demanding Long-Duration Autonomy (LDA) or other contexts that necessitate periodic recharging of multiple robots. A novel Integer Linear Programming (ILP) model is proposed to calculate the optimal initial conditions (partial charge) for individual robots, leading to the minimal utilization of charging stations. This formulation was further generalized to maximize the servicing time for robots given adequate charging stations. The efficacy of the proposed formulation is evaluated through a comparative analysis, measuring its performance against the thrift price scheduling algorithm documented in the existing literature. The findings not only validate the effectiveness of the proposed approach but also underscore its potential as a valuable tool in optimizing resource allocation for a range of robotic and engineering applications.

cs.RO↗

arXiv2024

Deep Attention Driven Reinforcement Learning (DAD-RL) for Autonomous Decision-Making in Dynamic Environment

Autonomous Vehicle (AV) decision making in urban environments is inherently challenging due to the dynamic interactions with surrounding vehicles. For safe planning, AV must understand the weightage of various spatiotemporal interactions in a scene. Contemporary works use colossal transformer architectures to encode interactions mainly for trajectory prediction, resulting in increased computational complexity. To address this issue without compromising spatiotemporal understanding and performance, we propose the simple Deep Attention Driven Reinforcement Learning (DADRL) framework, which dynamically assigns and incorporates the significance of surrounding vehicles into the ego's RL driven decision making process. We introduce an AV centric spatiotemporal attention encoding (STAE) mechanism for learning the dynamic interactions with different surrounding vehicles. To understand map and route context, we employ a context encoder to extract features from context maps. The spatiotemporal representations combined with contextual encoding provide a comprehensive state representation. The resulting model is trained using the Soft Actor Critic (SAC) algorithm. We evaluate the proposed framework on the SMARTS urban benchmarking scenarios without traffic signals to demonstrate that DADRL outperforms recent state of the art methods. Furthermore, an ablation study underscores the importance of the context-encoder and spatio temporal attention encoder in achieving superior performance.

cs.AI↗

arXiv2024

A reformulation of collision avoidance algorithm based on artificial potential fields for fixed-wing UAVs in a dynamic environment

As mini UAVs become increasingly useful in the civilian work domain, the need for a method for them to operate safely in a cluttered environment is growing, especially for fixed-wing UAVs as they are incapable of following the stop-decide-execute methodology. This paper presents preliminary research to design a reactive collision avoidance algorithm based on the improved definition of the repulsive forces used in the Artificial potential field algorithms to allow feasible and safe navigation of fixed-wing UAVs in cluttered, dynamic environments. We present simulation results of the improved definition in multiple scenarios, and we have also discussed possible future studies to improve upon these results.

cs.RO↗

arXiv2023

A Comprehensive Study on Modelling and Control of Autonomous Underwater Vehicle

Autonomous underwater vehicles (AUV) have become the de facto vehicle for remote operations involving oceanography, inspection, and monitoring tasks. These vehicles operate in different and often challenging environments; hence, the design and development of the AUV involving hydrodynamics and control systems need to be designed in detail. This book chapter presents a study on the modelling and robust control of a research vehicle in the presence of uncertainties. The vehicle's dynamic behaviour is modelled using a 6-degree-of-freedom approach, considering the effect of ocean currents. The level flight requirements for different speeds are derived, and the resulting model is decomposed into horizontal and vertical subsystems for linear analysis. The simulation results presented focus on the efficacy of linear controllers within three key subsystems: depth, yaw, and speed. Moreover, level-flight outcomes are demonstrated for a speed of 4 knots. The nonlinear control strategies employed in this study encompass conventional and sliding-mode control (SMC) methodologies. To ensure accurate tracking performance, the controller design considers the vehicle's dynamics with various uncertainties such as ocean currents, parameter uncertainty, CG (Center of Gravity) deviation and buoyancy variation. Both conventional and nonlinear SMC controllers' outcomes are showcased with a lawn-mowing manoeuvre scenario. A systematic comparison is drawn between the robustness of SMC against disturbances and parameter fluctuations in contrast to conventional controllers. Importantly, these results underscore the trade-off that accompanies SMC's robustness, as it necessitates a higher level of complexity in terms of controller design, intricate implementation intricacies, and the management of chattering phenomena.

eess.SY↗

arXiv2023

Geometric Tracking Control of a Multi-rotor UAV for Partially Known Trajectories

This paper presents a trajectory-tracking controller for multi-rotor unmanned aerial vehicles (UAVs) in scenarios where only the desired position and heading are known without the higher-order derivatives. The proposed solution modifies the state-of-the-art geometric controller, effectively addressing challenges related to the non-existence of the desired attitude and ensuring positive total thrust input for all time. We tackle the additional challenge of the non-availability of the higher derivatives of the trajectory by introducing novel nonlinear filter structures. We formalize theoretically the effect of these filter structures on the system error dynamics. Subsequently, through a rigorous theoretical analysis, we demonstrate that the proposed controller leads to uniformly ultimately bounded system error dynamics.

eess.SY↗

arXiv2023

Multi-Agent Deep Reinforcement Learning For Persistent Monitoring With Sensing, Communication, and Localization Constraints

Determining multi-robot motion policies for persistently monitoring a region with limited sensing, communication, and localization constraints in non-GPS environments is a challenging problem. To take the localization constraints into account, in this paper, we consider a heterogeneous robotic system consisting of two types of agents: anchor agents with accurate localization capability and auxiliary agents with low localization accuracy. To localize itself, the auxiliary agents must be within the communication range of an {anchor}, directly or indirectly. The robotic team's objective is to minimize environmental uncertainty through persistent monitoring. We propose a multi-agent deep reinforcement learning (MARL) based architecture with graph convolution called Graph Localized Proximal Policy Optimization (GALOPP), which incorporates the limited sensor field-of-view, communication, and localization constraints of the agents along with persistent monitoring objectives to determine motion policies for each agent. We evaluate the performance of GALOPP on open maps with obstacles having a different number of anchor and auxiliary agents. We further study (i) the effect of communication range, obstacle density, and sensing range on the performance and (ii) compare the performance of GALOPP with non-RL baselines, namely, greedy search, random search, and random search with communication constraint. For its generalization capability, we also evaluated GALOPP in two different environments -- 2-room and 4-room. The results show that GALOPP learns the policies and monitors the area well. As a proof-of-concept, we perform hardware experiments to demonstrate the performance of GALOPP.

cs.RO↗

arXiv2022

CAMEL: Learning Cost-maps Made Easy for Off-road Driving

Cost-maps are used by robotic vehicles to plan collision-free paths. The cost associated with each cell in the map represents the sensed environment information which is often determined manually after several trial-and-error efforts. In off-road environments, due to the presence of several types of features, it is challenging to handcraft the cost values associated with each feature. Moreover, different handcrafted cost values can lead to different paths for the same environment which is not desirable. In this paper, we address the problem of learning the cost-map values from the sensed environment for robust vehicle path planning. We propose a novel framework called as CAMEL using deep learning approach that learns the parameters through demonstrations yielding an adaptive and robust cost-map for path planning. CAMEL has been trained on multi-modal datasets such as RELLIS-3D. The evaluation of CAMEL is carried out on an off-road scene simulator (MAVS) and on field data from IISER-B campus. We also perform realworld implementation of CAMEL on a ground rover. The results shows flexible and robust motion of the vehicle without collisions in unstructured terrains.

cs.RO↗

arXiv2022

A Deep Learning Approach To Estimation Using Measurements Received Over a Network

We propose a novel deep neural network (DNN) based approximation architecture to learn estimates of measurements. We detail an algorithm that enables training of the DNN. The DNN estimator only uses measurements, if and when they are received over a communication network. The measurements are communicated over a network as packets, at a rate unknown to the estimator. Packets may suffer drops and need retransmission. They may suffer waiting delays as they traverse a network path. Works on estimation often assume knowledge of the dynamic model of the measured system, which may not be available in practice. The DNN estimator doesn't assume knowledge of the dynamic system model or the communication network. It doesn't require a history of measurements, often used by other works. The DNN estimator results in significantly smaller average estimation error than the commonly used Time-varying Kalman Filter and the Unscented Kalman Filter, in simulations of linear and nonlinear dynamic systems. The DNN need not be trained separately for different communications network settings. It is robust to errors in estimation of network delays that occur due to imperfect time synchronization between the measurement source and the estimator. Last but not the least, our simulations shed light on the rate of updates that result in low estimation error.

cs.LG↗

arXiv2022

Nonlinear Model Predictive Control Framework For Cooperative Three-Agent Target Defense Game

This paper presents cooperative target defense guidance strategies using nonlinear model predictive control (NMPC) framework for a target-attacker-defender (TAD) game. The TAD game consists of an attacker and a cooperative target-defender pair. The attacker's objective is to capture the target, whereas the target-defender team acts together such that the defender can intercept the attacker and ensure target survival. We assume that the cooperative target-defender pair do not have perfect knowledge of the attacker states, and hence the states are estimated using an Extended Kalman Filter (EKF). The capture analysis based on the Apollonius circles is performed to identify the target survival regions. The efficacy of the NMPC-based solution is evaluated through extensive numerical simulations. The results show that the NMPC-based solution offers robustness to the different unknown attacker models and has better performance than CLOS and A-CLOS based strategies.

eess.SY↗

arXiv2022

Multi-AAV Cooperative Path Planning using Nonlinear Model Predictive Control with Localization Constraints

In this paper, we solve a joint cooperative localization and path planning problem for a group of Autonomous Aerial Vehicles (AAVs) in GPS-denied areas using nonlinear model predictive control (NMPC). A moving horizon estimator (MHE) is used to estimate the vehicle states with the help of relative bearing information to known landmarks and other vehicles. The goal of the NMPC is to devise optimal paths for each vehicle between a given source and destination while maintaining desired localization accuracy. Estimating localization covariance in the NMPC is computationally intensive, hence we develop an approximate analytical closed form expression based on the relationship between covariance and path lengths to landmarks. Using this expression while computing NMPC commands reduces the computational complexity significantly. We present numerical simulations to validate the proposed approach for different numbers of vehicles and landmark configurations. We also compare the results with EKF-based estimation to show the superiority of the proposed closed form approach.

cs.RO↗

arXiv2021

A Model-free Deep Reinforcement Learning Approach To Maneuver A Quadrotor Despite Single Rotor Failure

Ability to recover from faults and continue mission is desirable for many quadrotor applications. The quadrotor's rotor may fail while performing a mission and it is essential to develop recovery strategies so that the vehicle is not damaged. In this paper, we develop a model-free deep reinforcement learning approach for a quadrotor to recover from a single rotor failure. The approach is based on Soft-actor-critic that enables the vehicle to hover, land, and perform complex maneuvers. Simulation results are presented to validate the proposed approach using a custom simulator. The results show that the proposed approach achieves hover, landing, and path following in 2D and 3D. We also show that the proposed approach is robust to wind disturbances.

cs.RO↗

arXiv2021

Risk-Aware Submodular Optimization for Multi-objective Travelling Salesperson Problem

We introduce a risk-aware multi-objective Traveling Salesperson Problem (TSP) variant, where the robot tour cost and tour reward have to be optimized simultaneously. The robot obtains reward along the edges in the graph. We study the case where the rewards and the costs exhibit diminishing marginal gains, i.e., are submodular. Unlike prior work, we focus on the scenario where the costs and the rewards are uncertain and seek to maximize the Conditional-Value-at-Risk (CVaR) metric of the submodular function. We propose a risk-aware greedy algorithm (RAGA) to find a bounded-approximation algorithm. The approximation algorithm runs in polynomial time and is within a constant factor of the optimal and an additive term that depends on the optimal solution. We use the submodular function's curvature to improve approximation results further and verify the algorithm's performance through simulations.

cs.RO↗

arXiv2021

NMPC-Based Cooperative Strategy For A Target Pair To Lure Two Attackers Into Collision

This paper presents a cooperative target defense strategy using nonlinear model-predictive control (NMPC) framework for a two--targets two--attackers (2T2A) game. The 2T2A game consists of two attackers and two targets. Each attacker needs to capture a designated target individually. However, the two targets cooperate to lure the attackers into a collision. We assume that the cooperative target pair do not have perfect knowledge of the attacker states, and hence they estimate the attacker states using an extended Kalman filter (EKF). The NMPC scheme computes closed- loop optimal control commands for the targets while respecting imposed state and control constraints. Theoretical analysis is carried out to determine regions that will lead to the targets' survival, given the initial positions of the attacker and target agents. Numerical simulations are carried out to evaluate the performance of the proposed NMPC- based strategy for different scenarios.

eess.SY↗

arXiv2021

OffRoadTranSeg: Semi-Supervised Segmentation using Transformers on OffRoad environments

We present OffRoadTranSeg, the first end-to-end framework for semi-supervised segmentation in unstructured outdoor environment using transformers and automatic data selection for labelling. The offroad segmentation is a scene understanding approach that is widely used in autonomous driving. The popular offroad segmentation method is to use fully connected convolution layers and large labelled data, however, due to class imbalance, there will be several mismatches and also some classes may not be detected. Our approach is to do the task of offroad segmentation in a semi-supervised manner. The aim is to provide a model where self supervised vision transformer is used to fine-tune offroad datasets with self-supervised data collection for labelling using depth estimation. The proposed method is validated on RELLIS-3D and RUGD offroad datasets. The experiments show that OffRoadTranSeg outperformed other state of the art models, and also solves the RELLIS-3D class imbalance problem.

cs.CV↗