Searcharxiv⌕ Search

arXiv subjects

P. Bambade

Publications and source records attributed to P. Bambade.

At least 163 records · Page 9Linked to original sources

Studies of the semileptonic $\bar B^0\to D^{*+}\ell^-\barν_\ell$ and $B^-\to D^{0}\ell^-\barν_\ell$ decay processes with 34.6 fb$^{-1}$ of Belle II data

We report measurements of the $\bar{B}^0 \to D^{*+} \ell^{-} \barν_l$ and $B^- \to D^{0} \ell^{-} \barν_l$ processes using 34.6 fb$^{-1}$ of collision events recorded by the Belle II experiment at the SuperKEKB asymmetric-energy $e^+ e^-$ collider. For the $B^-\to D^{0}\ell^-\barν_\ell$ channel, we present first studies that isolate this decay from other semileptonic processes and backgrounds. We report a measurement of the $\bar{B}^0 \to D^{*+} \ell^{-} \barν_l$ branching fraction and obtain ${\cal B}(\bar{B}^0 \to D^{*+} \ell^{-} \barν_l) = \left(4.60 \pm 0.05_{\mathrm{stat}}\pm0.17_{\mathrm{syst}} \pm 0.45_{π_s}\right) \%$, in agreement with the world average. Here, the uncertainties are statistical, systematic, and related to slow pion reconstruction, respectively. The systematic uncertainties are limited by the statistics of auxiliary measurements and will improve in the future. We also report differential branching fractions in five bins of the hadronic recoil parameter $w$ for $\bar{B}^0 \to D^{*+} \ell^{-} \barν_l$, unfolded to account for resolution and efficiency effects.

hep-ex↗

A calibration of the Belle II hadronic tag-side reconstruction algorithm with $B \rightarrow X\ell ν$ decays

Tag-side reconstruction is an important method for reconstructing $B$ meson decays with missing energy. The Belle II tag-side reconstruction algorithm, Full Event Interpretation, relies on a hierarchical reconstruction of $B$ meson decays with multivariate classification employed at each stage of reconstruction. Given the large numbers of classifiers employed and decay chains reconstructed, the performance of the algorithm on data and simulation differs significantly. Here, calibration factors are derived for hadronic tag-side $B$ decays by measuring a signal side decay, $B \rightarrow X\ell ν$, in $34.6$ fb$^{-1}$ of Belle II data. For a very loose selection on the tag-side $B$ multivariate classifier, the calibration factors are $0.65 \pm 0.02$ and $0.83 \pm 0.03$ for tag-side $B^{+}$ and $B^{0}$ mesons, respectively.

hep-ex↗

Rediscovery of $B \to ϕK^{(*)}$ decays and measurement of the longitudinal polarization fraction $f_L$ in $B \to ϕK^{*}$ decays using the Summer 2020 Belle II dataset

We utilize a sample of 34.6 fb$^{-1}$, collected by the Belle II experiment at the SuperKEKB asymmetric energy $e^+e^-$ collider, to search for the $B^+ \to ϕK^+$, $B^+ \to ϕK^{*+}$, $B^0 \to ϕK^0_S$, and $B^0 \to ϕK^{*0}$ decays. Charmless hadronic $B$ decays represent an important part of the Belle II physics program, and are an ideal benchmark to test the detector capabilities in terms of tracking efficiency, charged particle identification, vertexing, and advanced analysis techniques. Each channel is observed with a significance that exceeds 5 standard deviations, and we obtain measurements of their branching ratios that are in good agreement with the world averages. For the $B \to ϕK^*$ modes, we also perform a measurement of the longitudinal polarization fraction $f_L$.

hep-ex↗

First flavor tagging calibration using 2019 Belle II data

We report on the first calibration of the standard Belle II $B$-flavor tagger using the full data set collected at the $Υ(4{\rm S})$ resonance in 2019 with the Belle II detector at the SuperKEKB collider, corresponding to 8.7 fb$^{-1}$ of integrated luminosity. The calibration is performed by reconstructing various hadronic charmed $B$-meson decays with flavor-specific final states. We use simulation to optimize our event selection criteria and to train the flavor tagging algorithm. We determine the tagging efficiency and the fraction of wrongly identified tag-side $B$~candidates from a measurement of the time-integrated $B^0-\overline{B}^0$ mixing probability. The total effective efficiency is measured to be $\varepsilon_{\rm eff} = \big(33.8 \pm 3.6(\text{stat}) \pm 1.6(\text{sys})\big)\%$, which is in good agreement with the predictions from simulation and comparable with the best one obtained by the Belle experiment. The results show a good understanding of the detector performance and offer a basis for future calibrations.

hep-ex↗

Measurement of the branching fraction ${\cal B}(\bar B^0\to D^{*+}\ell^-\barν_\ell)$ with early Belle II data

We measure the branching fractions for the decays $\bar{B}^0 \to D^{*+} e^{-} \barν_e$ and $\bar{B}^0 \to D^{*+} μ^{-} \barν_μ$ using $8.70 \pm 0.09~{\rm fb}^{-1}$ of data collected by the Belle II experiment at the SuperKEKB asymmetric-energy $e^+ e^-$ collider. Candidate signal decays are reconstructed with the subsequent decays $D^{*+}\to D^0 π^+$ and $D^0\to K^-π^+$. We obtain the results ${\cal B}(\bar{B}^0 \to D^{*+} e^{-} \barν_e)$ = $(4.55\pm0.14(\mathrm{stat})\pm0.35 (\mathrm{syst})) \%$ and ${\cal B}(\bar{B}^0 \to D^{*+} μ^{-} \barν_μ)$ = $(4.84\pm 0.13(\mathrm{stat})\pm0.37(\mathrm{syst})) \%$, in agreement with the world averages. The measurements serve to validate the full chain of detector operation and calibration, data collection and processing, and production of physics results in the case of semileptonic $B$-meson decays.

hep-ex↗

Charmless $B$ decay reconstruction in 2019 Belle II data

We report on the reconstruction of various charmless $B$ decays from electron-positron collisions at the energy corresponding to the $Υ(4S)$ resonance collected with the Belle II detector at the SuperKEKB collider. We use simulation to devise optimized event selections and apply them to the full data set collected in 2019, corresponding to 8.7\,fb$^{-1}$ of integrated luminosity. We fit the difference between half of the collision energy and the $B$ candidate energy (in the $Υ(4S)$ frame) for events restricted to a signal-rich range in beam-energy-constrained mass to search for charmless signals. Signal yields of approximately 80, 15, 20, 30, 90, and 160 decays are reconstructed for the channels $B^0 \to K^+π^-$, $B^0 \to π^+π^-$, $B^+ \to K^0_S(\to π^+π^-)π^+$, $B^+ \to K^+π^0(\to γγ)$, $B^+ \to K^+K^-K^+$, and $B^+ \to K^+π^-π^+$, respectively. Yields and background contaminations are compatible with those expected from simulation and comparable with those obtained by the Belle experiment. The results show a good understanding of the detector performance and offer a reliable basis to assess projections for future reach.

hep-ex↗

Measurement of the $B^0$ lifetime using fully reconstructed hadronic decays in the 2019 Belle II dataset

This document presents the measurement of $B^0$ meson lifetimes using the 2019 Belle II dataset that corresponds to an integrated luminosity of $8.7 \pm 0.2$ fb$^{-1}$. Each candidate is fully reconstructed with hadronic decay final states on the signal side, while the rest-of-event technique allows to infer the decay vertex position on the other (tag) side. $B^0$ lifetime is extracted from an unbinned maximum likelihood fit to the distribution of the difference between the signal side $B^0$ candidate and the tag side decay times. The measured lifetime is $τ_{B^0} = 1.48 \pm 0.28 \pm 0.06 $ ps, where the first uncertainty is statistical and the second is systematic.

hep-ex↗

Search for an invisibly decaying $Z^{\prime}$ boson at Belle II in $e^+ e^- \to μ^+ μ^- (e^{\pm} μ^{\mp})$ plus missing energy final states

Theories beyond the standard model often predict the existence of an additional neutral boson, the $Z^{\prime}$. Using data collected by the Belle II experiment during 2018 at the SuperKEKB collider, we perform the first searches for the invisible decay of a $Z^{\prime}$ in the process $e^+ e^- \to μ^+ μ^- Z^{\prime}$ and of a lepton-flavor-violating $Z^{\prime}$ in $e^+ e^- \to e^{\pm} μ^{\mp} Z^{\prime}$. We do not find any excess of events and set 90\% credibility level upper limits on the cross sections of these processes. We translate the former, in the framework of an $L_μ-L_τ$ theory, into upper limits on the $Z^{\prime}$ coupling constant at the level of $5 \times 10^{-2}$ -- $1$ $M_{Z^\prime}\leq 6$ GeV/$c^2$.

hep-ex↗

Measurement of the integrated luminosity of the Phase 2 data of the Belle II experiment

From April to July 2018, a data sample at the peak energy of the $Υ(4S)$ resonance was collected with the Belle~II detector at the SuperKEKB electron-positron collider. This is the first data sample of the Belle~II experiment. Using Bhabha and digamma events, we measure the integrated luminosity of the data sample to be ($496.3 \pm 0.3 \pm 3.0$)~pb$^{-1}$, where the first uncertainty is statistical and the second is systematic. This work provides a basis for future luminosity measurements at Belle~II.

hep-ex↗

The Compact Linear Collider (CLIC) - 2018 Summary Report

The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the detector. CLIC is foreseen to be built and operated in stages, at centre-of-mass energies of 380 GeV, 1.5 TeV and 3 TeV, respectively. CLIC uses a two-beam acceleration scheme, in which 12 GHz accelerating structures are powered via a high-current drive beam. For the first stage, an alternative with X-band klystron powering is also considered. CLIC accelerator optimisation, technical developments and system tests have resulted in an increased energy efficiency (power around 170 MW) for the 380 GeV stage, together with a reduced cost estimate at the level of 6 billion CHF. The detector concept has been refined using improved software tools. Significant progress has been made on detector technology developments for the tracking and calorimetry systems. A wide range of CLIC physics studies has been conducted, both through full detector simulations and parametric studies, together providing a broad overview of the CLIC physics potential. Each of the three energy stages adds cornerstones of the full CLIC physics programme, such as Higgs width and couplings, top-quark properties, Higgs self-coupling, direct searches, and many precision electroweak measurements. The interpretation of the combined results gives crucial and accurate insight into new physics, largely complementary to LHC and HL-LHC. The construction of the first CLIC energy stage could start by 2026. First beams would be available by 2035, marking the beginning of a broad CLIC physics programme spanning 25-30 years.

physics.acc-ph↗

Updated baseline for a staged Compact Linear Collider

The Compact Linear Collider (CLIC) is a multi-TeV high-luminosity linear e+e- collider under development. For an optimal exploitation of its physics potential, CLIC is foreseen to be built and operated in a staged approach with three centre-of-mass energy stages ranging from a few hundred GeV up to 3 TeV. The first stage will focus on precision Standard Model physics, in particular Higgs and top-quark measurements. Subsequent stages will focus on measurements of rare Higgs processes, as well as searches for new physics processes and precision measurements of new states, e.g. states previously discovered at LHC or at CLIC itself. In the 2012 CLIC Conceptual Design Report, a fully optimised 3 TeV collider was presented, while the proposed lower energy stages were not studied to the same level of detail. This report presents an updated baseline staging scenario for CLIC. The scenario is the result of a comprehensive study addressing the performance, cost and power of the CLIC accelerator complex as a function of centre-of-mass energy and it targets optimal physics output based on the current physics landscape. The optimised staging scenario foresees three main centre-of-mass energy stages at 380 GeV, 1.5 TeV and 3 TeV for a full CLIC programme spanning 22 years. For the first stage, an alternative to the CLIC drive beam scheme is presented in which the main linac power is produced using X-band klystrons.

physics.acc-ph↗

2D-Oide effect

The Oide effect considers the synchrotron radiation in the final focusing quadrupole and it sets a lower limit on the vertical beam size at the Interaction Point, particularly relevant for high energy linear colliders. The theory of the Oide effect was derived considering only the radiation in the focusing plane of the magnet. This article addresses the theoretical calculation of the radiation effect on the beam size consider- ing both focusing and defocusing planes of the quadrupole, refered to as 2D-Oide. The CLIC 3 TeV final quadrupole (QD0) and beam parameters are used to compare the theoretical results from the Oide effect and the 2D-Oide effect with particle tracking in PLACET. The 2D-oide demonstrates to be important as it increases by 17% the contribution to the beam size. Further insight into the aberrations induced by the synchrotron radiation opens the possibility to partially correct the 2D-Oide effect with octupole magn

physics.acc-ph↗

ECFA Detector R&D Panel, Review Report

Two special calorimeters are foreseen for the instrumentation of the very forward region of an ILC or CLIC detector; a luminometer (LumiCal) designed to measure the rate of low angle Bhabha scattering events with a precision better than 10$^{-3}$ at the ILC and 10$^{-2}$ at CLIC, and a low polar-angle calorimeter (BeamCal). The latter will be hit by a large amount of beamstrahlung remnants. The intensity and the spatial shape of these depositions will provide a fast luminosity estimate, as well as determination of beam parameters. The sensors of this calorimeter must be radiation-hard. Both devices will improve the e.m. hermeticity of the detector in the search for new particles. Finely segmented and very compact electromagnetic calorimeters will match these requirements. Due to the high occupancy, fast front-end electronics will be needed. Monte Carlo studies were performed to investigate the impact of beam-beam interactions and physics background processes on the luminosity measurement, and of beamstrahlung on the performance of BeamCal, as well as to optimise the design of both calorimeters. Dedicated sensors, front-end and ADC ASICs have been designed for the ILC and prototypes are available. Prototypes of sensor planes fully assembled with readout electronics have been studied in electron beams.

physics.ins-det↗

Present status and first results of the final focus beam line at the KEK Accelerator Test Facility

ATF2 is a final-focus test beam line which aims to focus the low emittance beam from the ATF damping ring to a vertical size of about 37 nm and to demonstrate nanometer level beam stability. Several advanced beam diagnostics and feedback tools are used. In December 2008, construction and installation were completed and beam commissioning started, supported by an international team of Asian, European, and U.S. scientists. The present status and first results are described.

physics.acc-ph↗

Luminosity Measurement at ILC

More than twenty institutes join the FCAL Collaboration in study of design of the very forward region of a detector for ILC and CLIC. Of particular importance is an accurate luminosity measurement to the level of 10-3, a requirement driven by the potential for precision physics at a future linear collider. In this paper, the method for luminosity measurement, requirements on luminometer and its integration in the forward region are presented. The impact of several effects contributing to the systematic uncertainty of luminosity measurement is given.

physics.ins-det↗

Photon production at the interaction point of the ILC

The intense beam-beam effect at the interaction point of the International Linear Collider (ILC) causes large disruption of the beams and the production of photons. These photons, arising dominantly through beamstrahlung emission, are problematic for the machine design as they need to be transported and dumped in a controlled way. In this work, we perform simulations of the beam-beam interaction to predict photon production rates and distributions for the different beam parameters considered at ILC. The results are expressed in terms of a set of cones of excluded power, allowing to define the beam-stay-clear requirements relevant for different cases and contexts. A comparison is also made with theoretical expectations. The suggested photon cone half-opening angles are 0.75 and 0.85 mrad in the horizontal and vertical planes, respectively. These cones cover all machine energies and parameter sets, and include the low power Compton photons.

physics.acc-ph↗

The Impact of BeamCal Performance at Different ILC Beam Parameters and Crossing Angles on \tilde{tau} searches

The ILC accelerator parameters and detector concepts are still under discussion in the world-wide community. As will be shown, the performance of the BeamCal, the calorimeter in the very forward area of the ILC detector, is very sensitive to the beam parameter and crossing angle choices. We propose here BeamCal designs for a small (0 or 2 mrad) and large (20 mrad) crossing angles and report about the veto performance study done. As illustration, the influence of several proposed beam parameter sets and crossing-angles on the signal to background ratio in the stau search is estimated for a particular realization of the super-symmetric model.

physics.acc-ph↗

New final doublets and power densities for the ILC small crossing angle layout

In this paper we use current and proposed final doublet magnet technologies to reoptimise the interaction region of the International Linear Collider and reduce the power losses. The result is a set of three new final doublet layouts with improved beam transport properties. The effect of localised power deposition is considered, and its reduction using Tungsten liners.

physics.acc-ph↗