arXiv subjects

P. Battaglia

Publications and source records attributed to P. Battaglia.

At least 73 records · Page 4Linked to original sources

arXiv2026

Euclid Quick Data Release (Q1). The Strong Lensing Discovery Engine F -- Bright and low-redshift strong lenses

We present 72 additional galaxy-galaxy strong lenses that complement the sample discovered in the Euclid Quick Release 1 data (63.1 deg^2) of the Strong Lens Discovery Engine (SLDE) papers A-E. It is shown that previous pre-selection of potential lenses, which excluded objects from the Gaia catalogue, led to missing several bright and low-redshift strong lenses, adding more than 10% new strong lens candidates compared to the previous search. In total, the catalogue includes 38 "grade A" (confident) and 34 "grade B" (probable) candidates. These lenses are identified through a combination of two independent searches for bright nearby objects: one based on machine-learning models followed by expert visual inspection, and the other based solely on expert visual inspection, targeting objects not included in the initial machine-learning selection (a limitation identified only after extensive visual inspection). With these additional strong lens candidates, we augment the expected number of high-confidence candidates in the Euclid Wide Survey from previous forecasts to 120000. Detailed semi-automated lens modelling confirms at least 41 systems out of 72, a fraction consistent with that found in SLDE A (315 out of 488). These include: multiple edge-on disc lenses; sources with arcs near the lens centre; "red sources"; and an edge-on disk galaxy lensing a galaxy merger, producing two sets of lensed features, an Einstein ring and a doubly imaged component. The median redshift of these systems is $Δ$ z ~ 0.3 lower than that of the SLDE A sample.

astro-ph.GA↗

arXiv2026

Euclid preparation. The impact of redshift interlopers on the two-point correlation function analysis

The Euclid survey aims to measure the spectroscopic redshift of emission-line galaxies by identifying the H$\,α$ line in their slitless spectra. This method is sensitive to the signal-to-noise ratio of the line, as noise fluctuations or other strong emission lines can be misidentified as H$\,α$, depending on redshift. These effects lead to catastrophic redshift errors and the inclusion of interlopers in the sample. We forecast the impact of such redshift errors on galaxy clustering measurements. In particular, we study the effect of interloper contamination on the two-point correlation function (2PCF), the growth rate of structures, and the Alcock-Paczynski (AP) parameters. We analyze 1000 synthetic spectroscopic catalogues, the EuclidLargeMocks, designed to match the area and selection function of the Data Release 1 (DR1) sample. We estimate the 2PCF of the contaminated catalogues, isolating contributions from correctly identified galaxies and from interlopers. We explore different models with increasing complexity to describe the measured 2PCF at fixed cosmology. Finally, we perform a cosmological inference and evaluate the systematic error on the inferred $fσ_8$, $α_{\parallel}$ and $α_{\perp}$ values associated with different models. Our results demonstrate that a minimal modelling approach, which only accounts for an attenuation of the clustering signal regardless of the type of contaminants, is sufficient to recover the correct values of $fσ_8$, $α_{\parallel}$, and $α_{\perp}$ at DR1. The accuracy and precision of the estimated AP parameters are largely insensitive to the presence of interlopers. The adoption of a minimal model induces a 1%-3% systematic error on the growth rate of structure estimation, depending on the redshift. However, this error remains smaller than the statistical error expected for the Euclid DR1 analysis.

astro-ph.CO↗

arXiv2026

Euclid preparation. Simulated galaxy catalogues for non-standard cosmological models

Stage-IV galaxy surveys will provide the opportunity to test cosmological models and the underlying theory of gravity with unparalleled precision. In this context, it is crucial for the Euclid mission to leverage its spectroscopic and photometric probes to systematically investigate and incorporate non-standard cosmological models, including modified gravity, alternative dark energy scenarios, massive neutrinos, and primordial non-Gaussianity. We produce and release publicly simulated galaxy catalogues from a broad suite of non-standard cosmological simulations, which we processed through a model-independent analytical pipeline, making use of Rockstar for halo identification, and a modified version of the SciPic library for the galaxy-halo connection using the halo occupation distribution framework. We investigate their galaxy-clustering characteristics via the multipoles of the 2PCF in redshift space and VDG, a highly performant model for galaxy clustering. Across a wide range of models, the linear growth rate multiplied by the matter density within spheres of radius 12,Mpc, fs12, exhibits a notable robustness to the choice of cosmological template. Compared to previous works, our study extends this result to numerous scenarios with markedly distinct gravitational or dark energy dynamics. We find that the most of the scatter in cosmological parameter inference already appears when using the cosmological model of the simulations as templates. Using a `wrong' template can also introduce an additional scatter, although with smaller amplitude. Often, we find deviations much larger than error bars, meaning that the Gaussian approximation for the covariance might need to be further studied. Future cosmological investigations must broaden their scope to include a diverse array of non-standard theoretical frameworks, extending beyond LCDM and rudimentary dynamic dark energy models.

astro-ph.CO↗

arXiv2026

Euclid: The linear-construction covariance and cosmology

We study the properties of galaxy cluster 2-point correlation function covariance matrices estimated using the linear-construction (LC) method, which is computationally up to 20 times faster than the standard sample-covariance method. Our goal is to assess how well the LC method performs in cosmological parameter estimation compared to the sample covariance. We use a set of 1000 mock dark matter halo catalogues to compute both the LC-covariance and the sample-covariance estimates in four redshift shells. These numerical matrices are used to fit a theoretical four-parameter model for the covariance. We then use the two fitted covariance models in a likelihood function to estimate two cosmological parameters - the matter density parameter $Ω_{\rm m}$ and the amplitude of the matter density fluctuations $σ_8$ - from the simulated mock catalogues. The purpose of this is to validate the LC-covariance-based model against the sample-covariance model. The catalogues were simulated assuming the spatially flat $Λ$CDM cosmology, with $Ω_{\rm m} = 0.30711$ and $σ_8=0.8288$. We find that the parameter posteriors obtained using the sample- and LC-covariance models agree well with each other and with the simulation cosmology. The two pairs of marginalized constraints are $Ω_{\rm m} = 0.307 \pm 0.003$ and $σ_8 = 0.826\pm 0.009$ (sample covariance), and $Ω_{\rm m} = 0.308 \pm 0.003$ and $σ_8 = 0.825 \pm 0.009$ (LC covariance). The posterior widths are the same, and the difference in the median values is less than $0.16\,σ$ for both parameters.

astro-ph.CO↗

arXiv2026

Euclid Quick Data Release (Q1) -- Characteristics and limitations of the spectroscopic measurements

The SPE processing function (PF) of the \Euclid pipeline is dedicated to the automatic analysis of one-dimensional spectra to determine redshifts, line fluxes, and spectral classifications. The first \Euclid Quick Data Release (Q1) delivers these measurements for all $H_\mathrm{E}<22.5$ objects identified in the photometric survey. In this paper, we present an overview of the SPE PF algorithm and assess its performance by comparing its results with high-quality spectroscopic redshifts from the Dark Energy Spectroscopic Instrument (DESI) survey in the Euclid Deep Field North. Our findings highlight remarkable accuracy in successful redshift measurements, with a bias of less than $3 \times 10^{-5}$ in $(z_{\rm SPE}-z_{\rm DESI})/(1+z_{\rm DESI})$ and a high precision of approximately $10^{-3}$. The majority of spectra have only a single spectral feature or none at all. To avoid spurious detections, where noise features are misinterpreted as lines or lines are misidentified, it is therefore essential to apply well-defined criteria on quantities such as the redshift probability or the \ha\ flux and signal-to-noise ratio. Using a well-tuned quality selection, we achieve an 89\% redshift success rate in the target redshift range for cosmology ($0.9<z<1.8$), which is well covered by DESI for $z<1.6$. Outside this range where the \ha\ line is observable, redshift measurements are less reliable, except for sources showing specific spectral features (e.g., two bright lines or strong continuum). Ongoing refinements along the entire chain of PFs are expected to enhance both the redshift measurements and the spectral classification, allowing us to define the large and reliable sample required for cosmological analyses. Overall, the Q1 SPE results are promising, demonstrating encouraging potential for cosmology.

astro-ph.CO↗

arXiv2026

Euclid Quick Data Release (Q1): Euclid spectroscopy of quasars. 1. Identification and redshift determination of 3500 bright quasars

The slitless spectroscopy mode of the NISP onboard Euclid has enabled efficient spectroscopy of objects within a large FoV. We present a large and homogeneous sample of bright quasars identified from the Euclid Quick Data Release (Q1) by combining high-purity candidate selections from Gaia and WISE with the NISP spectra. Through visual inspection of the Euclid spectra of these quasar candidates, we identify approximately 3500 quasars with reliable redshifts at $0<z\lesssim 4.8$. Of these, 2686 are new spectroscopic identifications relative to existing public compilations. We generate the first Euclid composite spectrum of quasars covering rest-frame NUV to NIR wavelengths without telluric lines, which will be pivotal to NIR quasar spectral analysis. We obtain an empirical spectroscopic depth of $J_{\rm E}\lesssim 21.5$ and $H_{\rm E}\lesssim 21.3$ at the sensitivity of the Wide Field Survey, beyond which the number of securely identified quasars declines sharply. We analyse VIS morphologies using Sersic and CAS metrics, and a deep-learning PSF fraction to track nuclear dominance. At low redshift ($z<0.5$), obvious host structures are common and a single Sersic model fits about half of the sources; at intermediate redshift ($0.5<z<2$), the nuclear component dominates, with 90% of the Sersic fits saturating at the upper index limit. In this intermediate redshift regime, $f_{\rm PSF}$ is available, and we use it as a more reliable compactness measure than the single-Sersic and CAS parameters to quantify nuclear versus host emission. We also explore the novel Euclid NIR colour space and discuss the role of these quasars in refining AGN selection techniques for future Euclid data releases. The spectroscopic bright quasar catalogue of this work, and the composite quasar spectrum, will be available at https://cdsarc.cds.unistra.fr/. (abridged)

astro-ph.GA↗

arXiv2026

Euclid Quick Data Release (Q1). Searching for giant gravitational arcs in galaxy clusters with mask region-based convolutional neural networks

Strong gravitational lensing (SL) by galaxy clusters is a powerful probe of their inner mass distribution and a key test bed for cosmological models. However, the detection of SL events in wide-field surveys such as Euclid requires robust, automated methods capable of handling the immense data volume generated. In this work, we present an advanced deep learning (DL) framework based on mask region-based convolutional neural networks (Mask R-CNNs), designed to autonomously detect and segment bright, strongly-lensed arcs in Euclid's multi-band imaging of galaxy clusters. The model is trained on a realistic simulated data set of cluster-scale SL events, constructed by injecting mock background sources into Euclidised Hubble Space Telescope images of 10 massive lensing clusters, exploiting their high-precision mass models constructed with extensive spectroscopic data. The network is trained and validated on over 4500 simulated images, and tested on an independent set of 500 simulations, as well as real Euclid Quick Data Release (Q1) observations. The trained network achieves high performance in identifying gravitational arcs in the test set, with a precision and recall of 76% and 58%, respectively, processing 2'x2' images in a fraction of a second. When applied to a sample of visually confirmed Euclid Q1 cluster-scale lenses, our model recovers 66% of gravitational arcs above the area threshold used during training. While the model shows promising results, limitations include the production of some false positives and challenges in detecting smaller, fainter arcs. Our results demonstrate the potential of advanced DL computer vision techniques for efficient and scalable arc detection, enabling the automated analysis of SL systems in current and future wide-field surveys. The code, ARTEMIDE, is open source and will be available at github.com/LBasz/ARTEMIDE.

astro-ph.CO↗

arXiv2026

Euclid: An automated system to match Rubin transient alerts to Euclid observations

The Vera C. Rubin observatory is expected to produce 10 million transient alerts per night in ugrizy filters, whilst Euclid is a visible to near-infrared space telescope engaged in a wide field survey. We present a prototype system to automatically match the transient alerts from Rubin to Euclid observations. The system produces joint light-curves containing both visible and near-infrared photometry, and joint image cutouts. Using Zwicky Transient Facility alerts as a proxy for Rubin, we demonstrate the system in use in cases where Euclid did and did not detect the transient and highlight the value that can be added in each case. For transients detected by Euclid these benefits include identifying the supernovae (SNe) in observations taken prior to ground-based detection, thereby better constraining the explosion time, such as SN 2024pvw detected ~3 d prior to ground based detections. In cases where Euclid did not detect the transient, we demonstrate the benefit of adding Euclid observations to improve host morphology measurements and associations.

astro-ph.IM↗

arXiv2026

Euclid. Properties and performance of the NISP signal estimator

The Euclid spacecraft, located at the second Lagrangian point of the Sun-Earth system, hosts the Near-Infrared Spectrometer and Photometer (NISP) instrument. NISP is equipped with a mosaic of 16 HgCdTe-based detectors to acquire near-infrared photometric and spectroscopic data. To meet the spacecraft's constraints on computational resources and telemetry bandwidth, the near-infrared signal is processed onboard via a dedicated hardware-software architecture designed to fulfil the stringent Euclid's data-quality requirements. A custom application software, running on the two NISP data processing units, implements the NISP signal estimator: an ad-hoc algorithm which delivers accurate flux measurements and simultaneously estimates the quality of signal estimation through the quality factor parameter. This paper investigates the properties of the NISP signal estimator by evaluating its performance during the early flight operations of the NISP instrument. First, we revisit the assumptions on which the inference of the near-infrared signal is based and investigate the origin of the main systematics of the signal estimator through Monte Carlo simulations. Then, we test the flight performance of the NISP signal estimator. Results indicate a systematic bias lower than 0.01 e/s for 99% of the NISP pixel array, well within the noise budget of the estimated signal. We also derive an analytical expression for the variance of the NISP signal estimator, demonstrating its validity, particularly when the covariance matrix is not pre-computed. Finally, we provide a robust statistical framework to interpret the QF parameter, analyse its dependence on the signal estimator bias, and show its sensitivity to cosmic ray hits on NISP detectors. Our findings corroborate previous results on the NISP signal estimator and suggest a leading-order correction based on the agreement between flight data and simulations.

astro-ph.IM↗

arXiv2026

Euclid: Early Release Observations -- The star-formation history of massive early-type galaxies in the Perseus cluster

The Euclid Early Release Observations (ERO) programme targeted the Perseus galaxy cluster in its central region over 0.7deg$^2$. We combined the exceptional image quality and depth of the ERO-Perseus with FUV and NUV observations from GALEX and AstroSat/UVIT, as well as $ugrizHα$ data from MegaCam at the CFHT, to deliver FUV-to-NIR magnitudes of the 87 brightest galaxies within the Perseus cluster. We reconstructed the star-formation history (SFH) of 59 early-type galaxies (ETGs) within the sample, through the spectral energy distribution (SED) fitting code CIGALE and state-of-the-art stellar population (SP) models to reproduce the galactic UV emission from hot, old, low-mass stars (i.e. the UV upturn). In addition, for the six most massive ETGs in Perseus [stellar masses $\log_{10}(M_{\ast}/M_{\odot}) \geq 10.3$], we analysed their spatially resolved SP through a radial SED fitting. In agreement with our previous work on Virgo ETGs, we found that (i) the majority of ETGs needs the presence of an UV upturn to explain their FUV emission, with temperatures $\langle T_{\rm UV}\rangle$~33800 K; (ii) ETGs have grown their stellar masses quickly, with SF timescales $τ\lesssim 1500$ Myr. We found that all ETGs in the sample have formed more than about 30% of their stellar masses at z~5, up to ~100%. At z~5, the stellar masses of the most massive nearby ETGs, which have present-day stellar masses $\log_{10}(M_{\ast}/M_{\odot})\gtrsim 10.8$, are then found to be comparable to those of the red quiescent galaxies observed by JWST at similar redshifts (z>4.6). This study can be extended to ETGs in the 14000 deg$^2$ extragalactic sky that will soon be observed by Euclid, in combination with those from other major upcoming surveys (e.g. Rubin/LSST), and UV observations, to ultimately assess whether the nearby massive ETGs represent the progeny of the massive high-z JWST red quiescent galaxies.

astro-ph.GA↗

arXiv2026

Euclid Quick Data Release (Q1). LEMON -- Lens Modelling with Neural networks. Automated and fast modelling of Euclid gravitational lenses with a singular isothermal ellipsoid mass profile

The Euclid mission aims to survey around 14000 deg^{2} of extragalactic sky, providing around 10^{5} gravitational lens images. Modelling of gravitational lenses is fundamental to estimate the total mass of the lens galaxy, along with its dark matter content. Traditional modelling of gravitational lenses is computationally intensive and requires manual input. In this paper, we use a Bayesian neural network, LEns MOdelling with Neural networks (LEMON), to model Euclid gravitational lenses with a singular isothermal ellipsoid mass profile. Our method estimates key lens mass profile parameters, such as the Einstein radius, while also predicting the light parameters of foreground galaxies and their uncertainties. We validate LEMON's performance on both mock Euclid datasets, real lenses observed with Hubble Space Telescope (HST), and real Euclid lenses, demonstrating the ability of LEMON to predict parameters of both simulated and real lenses. Results show promising accuracy and reliability in predicting the Einstein radius, mass and light ellipticities, effective radius, Sérsic index, lens magnitude, and unlensed source position for simulated lens galaxies. The application to real data, including the latest Quick Release 1 strong lens candidates, provides encouraging results in the recovery of the parameters for real lenses. We also verified that LEMON has the potential to accelerate traditional modelling methods, by giving to the classical optimiser the LEMON predictions as starting points, resulting in a speed-up of up to 26 times the original time needed to model a sample of gravitational lenses, a result that would be impossible with randomly initialised guesses. This work represents a significant step towards efficient, automated gravitational lens modelling, which is crucial for handling the large data volumes expected from Euclid.

astro-ph.CO↗

arXiv2026

Euclid preparation: LXXXVII. Non-Gaussianity of 2-point statistics likelihood: Precise analysis of the matter power spectrum distribution

We investigate the non-Gaussian features in the distribution of the matter power spectrum multipoles. Using the COVMOS method, we generate 100\,000 mock realisations of dark matter density fields in both real and redshift space across multiple redshifts and cosmological models. We derive an analytical framework linking the non-Gaussianity of the power spectrum distribution to higher-order statistics of the density field, including the trispectrum and pentaspectrum. We explore the effect of redshift-space distortions, the geometry of the survey, the Fourier binning, the integral constraint, and the shot noise on the skewness of the distribution of the power spectrum measurements. Our results demonstrate that the likelihood of the estimated matter power spectrum deviates significantly from a Gaussian assumption on nonlinear scales, particularly at low redshift. This departure is primarily driven by the pentaspectrum contribution, which dominates over the trispectrum at intermediate scales. We also examine the impact of the finiteness of the survey geometry in the context of the Euclid mission and find that both the shape of the survey and the integral constraint amplify the skewness.

astro-ph.CO↗

arXiv2026

Euclid: Improving redshift distribution reconstruction using a deep-to-wide transfer function

The Euclid mission seeks to understand the Universe expansion history and the nature of dark energy, which requires a very accurate estimate of redshift distribution. Achieving this accuracy relies on reference samples with spectroscopic redshifts, together with a procedure to match them to survey sources for which only photometric redshifts are available. One important source of systematic uncertainty is the mismatch in photometric properties between galaxies in the Euclid survey and the reference objects. We develop a method to degrade the photometry of objects with deep photometry to match the properties of any shallower survey in the multi-band photometric space, preserving all the correlations between the fluxes and their uncertainties. We compare our transfer method with more demanding image-based methods, such as Balrog from the Dark Energy Survey Collaboration. According to metrics, our method outperforms Balrog. We implement it in the redshift distribution reconstruction, based on the self-organising map approach of arXiv:1509.03318, and test it using a realistic sample from the Euclid Flagship Simulation. We find that the key ingredient is to ensure that the reference objects are distributed in the colour space the same way as the wide-survey objects, which can be efficiently achieved with our transfer method. In our best implementation, the mean redshift biases are consistently reduced across the tomographic bins, bringing a significant fraction of them within the Euclid accuracy requirements in all tomographic bins. Equally importantly, the tests allow us to pinpoint which step in the calibration pipeline has the strongest impact on achieving the required accuracy. Our approach also reproduces the overall redshift distributions, which are crucial for applications such as angular clustering.

astro-ph.CO↗

arXiv2025

Euclid: Photometric redshift calibration with self-organising maps

The Euclid survey aims to trace the evolution of cosmic structures up to redshift $z$ $\sim$ 3 and beyond. Its success depends critically on obtaining highly accurate mean redshifts for ensembles of galaxies $n(z)$ in all tomographic bins, essential for deriving robust cosmological constraints. However, photometric redshifts (photo-$z$s) suffer from systematic biases arising from various sources of uncertainty. To address these challenges, we utilised self-organising maps (SOMs) with mock samples resembling the Euclid Wide Survey (EWS), to validate Euclid's uncertainty requirement of $|Δ\langle z \rangle| = \langle z_{\text{est}} \rangle - \langle z \rangle \leq 0.002 (1+z)$ per tomographic bin, assuming DR3-level data. We observe that defining the redshift tomography using the mean spectroscopic redshift (spec-$z$) per SOM cell, results in none of the ten tomographic redshift bins satisfying the requirement. In contrast, the redshift tomography on the photo-$z$s of the EWS-like sample yields superior results, with eight out of ten bins [$0 < z\leq 2.5$] meeting the Euclid requirement. To enhance the realism of our study, we morph our calibration sample to mimic the C3R2 survey in incremental steps. In this context, a maximum of six out of ten bins meet the requirement, strongly advocating the adoption of a redshift tomography defined by the photo-$z$s of individual galaxies rather than the commonly used mean spec-$z$ of SOM cells. To examine the impact on the expected biases for $Ω_{\text{m}}$, $σ_{8}$, and $Δw_{0}$ measured by Euclid, we perform a Fisher forecast for cosmic shear only, based on our redshift uncertainties. Here, we find that even under an evaluation of the uncertainty where the impact of the redshift bias is substantial, most absolute biases remain below 0.1$σ$ in the idealised scenario and below 0.3$σ$ in the more realistic case.

astro-ph.CO↗

arXiv2025

Euclid Quick Data Release (Q1): VIS processing and data products

This paper describes the VIS Processing Function (VIS PF) of the Euclid ground segment pipeline, which processes and calibrates raw data from the VIS camera. We present the algorithms used in each processing element, along with a description of the on-orbit performance of VIS PF, based on Performance Verification (PV) and Q1 data. We demonstrate that the principal performance metrics (image quality, astrometric accuracy, photometric calibration) are within pre-launch specifications. The image-to-image photometric scatter is less than $0.8\%$, and absolute astrometric accuracy compared to Gaia is $5$ mas Image quality is stable over all Q1 images with a full width at half maximum (FWHM) of $0.\!^{\prime\prime}16$. The stacked images (combining four nominal and two short exposures) reach $I_\mathrm{E} = 25.6$ ($10σ$, measured as the variance of $1.\!^{\prime\prime}3$ diameter apertures). We also describe quality control metrics provided with each image, and an appendix provides a detailed description of the provided data products. The excellent quality of these images demonstrates the immense potential of Euclid VIS data for weak lensing. VIS data, covering most of the extragalactic sky, will provide a lasting high-resolution atlas of the Universe.

astro-ph.IM↗

arXiv2025

Euclid: Quick Data Release (Q1) -- A photometric search for ultracool dwarfs in the Euclid Deep Fields

We present a catalogue of 5306 new ultracool dwarf (UCD) candidates in the three Euclid Deep Fields in the Q1 data release. They range from late M to late T dwarfs, and include 1200 L and T dwarfs. A total of 546 objects have been spectroscopically confirmed, including 329 L dwarfs and 26 T dwarfs. We also provide empirical Euclid colours as a function of spectral type. Our UCD selection criteria are based only on colour ($I_\mathrm{E}-Y_\mathrm{E}>2.5$). The combined requirement for optical detection and stringent signal-to-noise ratio threshold ensure a high purity of the sample, but at the expense of completeness, especially for T dwarfs. The detections range from magnitudes 19 and 24 in the near-infrared bands, and extend down to 26 in the optical band. We discuss Euclid's capability to identify UCD candidates based on its photometric passbands. The average surface density of detected UCDs on the sky is approximately 100 objects per $\mathrm{deg}^2$, including 20 L and T dwarfs per $\mathrm{deg}^2$. This leads to an expectation of at least 1.4 million ultracool dwarfs in the final data release of the Euclid Wide Survey, including at least $300\,000$ L dwarfs, and more than 2600 T dwarfs, using the strict selection criteria from this work.

astro-ph.SR↗

arXiv2025

Euclid Quick Data Release (Q1). From simulations to sky: Advancing machine-learning lens detection with real Euclid data

In the era of large-scale surveys like Euclid, machine learning has become an essential tool for identifying rare yet scientifically valuable objects, such as strong gravitational lenses. However, supervised machine-learning approaches require large quantities of labelled examples to train on, and the limited number of known strong lenses has lead to a reliance on simulations for training. A well-known challenge is that machine-learning models trained on one data domain often underperform when applied to a different domain: in the context of lens finding, this means that strong performance on simulated lenses does not necessarily translate into equally good performance on real observations. In Euclid's Quick Data Release 1 (Q1), covering 63 deg2, 500 strong lens candidates were discovered through a synergy of machine learning, citizen science, and expert visual inspection. These discoveries now allow us to quantify this performance gap and investigate the impact of training on real data. We find that a network trained only on simulations recovers up to 92% of simulated lenses with 100% purity, but only achieves 50% completeness with 24% purity on real Euclid data. By augmenting training data with real Euclid lenses and non-lenses, completeness improves by 25-30% in terms of the expected yield of discoverable lenses in Euclid DR1 and the full Euclid Wide Survey. Roughly 20% of this improvement comes from the inclusion of real lenses in the training data, while 5-10% comes from exposure to a more diverse set of non-lenses and false-positives from Q1. We show that the most effective lens-finding strategy for real-world performance combines the diversity of simulations with the fidelity of real lenses. This hybrid approach establishes a clear methodology for maximising lens discoveries in future data releases from Euclid, and will likely also be applicable to other surveys such as LSST.

astro-ph.IM↗

arXiv2025

Euclid: The first statistical census of dusty and massive objects in the ERO/Perseus field

Our comprehension of the history of star formation at $z>3$ relies on rest-frame UV observations, yet this selection misses the most dusty and massive sources, yielding an incomplete census at early times. Infrared facilities such as Spitzer and the James Webb Space Telescope have revealed a hidden population at $z=3$-$6$ with extreme red colours, named HIEROs (HST-to-IRAC extremely red objects), identified by the criterion $H_{\mathrm{E}}-\mathrm{ch2}>2.25$. Recently, Euclid Early Release Observations (ERO) have made it possible to further study such objects by comparing Euclid data with ancillary Spitzer/IRAC imaging. We investigate a $232$ arcmin$^2$ area in the Perseus field using VIS and NISP photometry, complemented by the four Spitzer channels and ground-based MegaCam bands ($u$, $g$, $r$, ${\rm H}α$, $i$, $z$). Applying the colour cut yields $121$ HIEROs; after removing globular clusters, brown dwarfs, and unreliable cases through visual inspection of multiband cutouts, we obtain a final sample of $42$ robust HIEROs. Photometric redshifts and physical properties are estimated with the SED-fitting code Bagpipes. From the resulting $z_{\mathrm{phot}}$ and $M_*$ values, we compute the galaxy stellar mass function at $3.5<z<5.5$. Even after excluding possible AGN hosts or systems where the stellar mass may be overestimated, the high-mass end remains comparable to previous determinations, suggesting the true abundance could be higher. These results highlight the importance of further study of this obscured population to assess its role in the cosmic star-formation rate density and its consistency with galaxy-formation models, demonstrating Euclid's capability to advance our understanding of dust-hidden star formation across early epochs.

astro-ph.GA↗