Searcharxiv⌕ Search

arXiv subjects

P. Berio

Publications and source records attributed to P. Berio.

35 records · Page 2Linked to original sources

The disk of FU Orionis viewed with MATISSE/VLTI: first interferometric observations in $L$ and $M$ bands

The disk of FU Orionis is marginally resolved with MATISSE, suggesting that the region emitting in the thermal infrared is rather compact. An upper limit of $\sim1.3\pm0.1$ mas (in $L$) can be given for the diameter of the disk region probed in the $L$ band, corresponding to 0.5 au at the adopted Gaia EDR3 distance. This represents the hot, gaseous region of the accretion disk. The $N$-band data indicate that the dusty passive disk is silicate-rich. Only the innermost region of said dusty disk is found to emit strongly in the $N$ band, and it is resolved at an angular size of $\sim5$ mas, which translates to a diameter of about 2 au. The observations therefore place stringent constraints for the outer radius of the inner accretion disk. Dust radiative transfer simulations with RADMC-3D provide adequate fits to the spectral energy distribution from the optical to the submillimeter and to the interferometric observables when opting for an accretion rate $\dot{M}\sim 2\times 10^{-5}\, M_\odot$ yr$^{-1}$ and assuming $M_*=0.6\, M_\odot$. Most importantly, the hot inner accretion disk's outer radius can be fixed at 0.3 au. The outer radius of the dusty disk is placed at 100 au, based on constraints from scattered-light images in the literature. The dust mass contained in the disk is $2.4\times10^{-4}\, M_\odot$, and for a typical gas-to-dust ratio of 100, the total mass in the disk is approximately 0.02 $M_\odot$. We did not find any evidence for a nearby companion in the current interferometric data, and we tentatively explored the case of disk misalignment. For the latter, our modeling results suggest that the disk orientation is similar to that found in previous imaging studies by ALMA. Should there be an asymmetry in the very compact, inner accretion disk, this might be resolved at even smaller spatial scales ($\leq1$ mas).

astro-ph.SR↗

MATISSE, the VLTI mid-infrared imaging spectro-interferometer

Context:Optical interferometry is at a key development stage. ESO's VLTI has established a stable, robust infrastructure for long-baseline interferometry for general astronomical observers. The present second-generation instruments offer a wide wavelength coverage and improved performance. Their sensitivity and measurement accuracy lead to data and images of high reliability. Aims:We have developed MATISSE, the Multi AperTure mid-Infrared SpectroScopic Experiment, to access high resolution imaging in a wide spectral domain and explore topics such: stellar activity and mass loss; planet formation and evolution in the gas and dust disks around young stars; accretion processes around super massive black holes in AGN. Methods:The instrument is a spectro-interferometric imager covering three atmospheric bands (L,M,N) from 2.8 to 13.0 mu, combining four optical beams from the VLTI's telscopes. Its concept, related observing procedure, data reduction and calibration approach are the product of 30 years of instrumental research. The instrument utilizes a multi-axial beam combination that delivers spectrally dispersed fringes. The signal provides the following quantities at several spectral resolutions: photometric flux, coherent fluxes, visibilities, closure phases, wavelength differential visibilities and phases, and aperture-synthesis imaging. Results:We provide an overview of the physical principle of the instrument and its functionalities, the characteristics of the delivered signal, a description of the observing modes and of their performance limits. An ensemble of data and reconstructed images are illustrating the first acquired key observations. Conclusion:The instrument has been in operation at Cerro Paranal, ESO, Chile since 2018, and has been open for science use by the international community since April 2019. The first scientific results are being published now.

astro-ph.IM↗

The extended atmosphere and circumstellar environment of the cool evolved star VX Sagittarii as seen by MATISSE

Context. VX Sgr is a cool, evolved, and luminous red star whose stellar parameters are difficult to determine, which affects its classification. Aims. We aim to spatially resolve the photospheric extent as well as the circumstellar environment. Methods. We used interferometric observations obtained with the MATISSE instrument in the L (3 to 4 μm), M (4.5 to 5 μm), and N (8 to 13 μm) bands. We reconstructed monochromatic images using the MIRA software. We used 3D radiation-hydrodynamics (RHD) simulations carried out with CO5BOLD and a uniform disc model to estimate the apparent diameter and interpret the stellar surface structures. Moreover, we employed the radiative transfer codes Optim3D and Radmc3D to compute the spectral energy distribution for the L, M, and N bands, respectively. Results. MATISSE observations unveil, for the first time, the morphology of VX Sgr across the L, M, and N bands. The reconstructed images show a complex morphology with brighter areas whose characteristics depend on the wavelength probed. We measured the angular diameter as a function of the wavelength and showed that the photospheric extent in the L and M bands depends on the opacity through the atmosphere. In addition to this, we also concluded that the observed photospheric inhomogeneities can be interpreted as convection-related surface structures. The comparison in the N band yielded a qualitative agreement between the N band spectrum and simple dust radiative transfer simulations. However, it is not possible to firmly conclude on the interpretation of the current data because of the difficulty in constraing the model parameters using the limited accuracy of our absolute flux calibration. Conclusions. MATISSE observations and the derived reconstructed images unveil the appearance of the stellar surface and circumstellar environment across a very large spectral domain for the first time.

astro-ph.SR↗

First MATISSE L-band observations of HD 179218. Is the inner 10 au region rich in carbon dust particles?

Carbon is one of the most abundant components in the Universe. While silicates have been the main focus of solid phase studies in protoplanetary discs (PPDs), little is known about the solid carbon content especially in the planet-forming regions ($\sim $0.1 to 10 au). Fortunately, several refractory carbonaceous species present C-H bonds (such as hydrogenated nano-diamond and amorphous carbon as well as polycyclic aromatic hydrocarbons (PAHs)), which generate infrared (IR) features that can be used to trace the solid carbon reservoirs. The new mid-IR instrument MATISSE, installed at the Very Large Telescope Interferometer (VLTI), can spatially resolve the inner regions ($\sim$ 1 to 10 au) of PPDs and locate, down to the au-scale, the emission coming from carbon grains. Our aim is to provide a consistent view on the radial structure, down to the au-scale, as well as basic physical properties and the nature of the material responsible for the IR continuum emission in the inner disk region around HD 179218. We implemented a temperature-gradient model to interpret the disk IR continuum emission, based on a multiwavelength dataset comprising a broadband spectral energy distribution (SED) and VLTI H-, L-, and N-bands interferometric data obtained in low spectral resolution. Then, we added a ring-like component, representing the carbonaceous L-band features-emitting region, to assess its detectability in future higher spectral resolution observations employing mid-IR interferometry.

astro-ph.EP↗

Mid-infrared circumstellar emission of the long-period Cepheid l Carinae resolved with VLTI/MATISSE

The nature of circumstellar envelopes (CSE) around Cepheids is still a matter of debate. The physical origin of their infrared (IR) excess could be either a shell of ionized gas, or a dust envelope, or both. This study aims at constraining the geometry and the IR excess of the environment of the long-period Cepheid $\ell$ Car (P=35.5 days) at mid-IR wavelengths to understand its physical nature. We first use photometric observations in various bands and Spitzer Space Telescope spectroscopy to constrain the IR excess of $\ell$ Car. Then, we analyze the VLTI/MATISSE measurements at a specific phase of observation, in order to determine the flux contribution, the size and shape of the environment of the star in the L band. We finally test the hypothesis of a shell of ionized gas in order to model the IR excess. We report the first detection in the L band of a centro-symmetric extended emission around l Car, of about 1.7$R_\star$ in FWHM, producing an excess of about 7.0\% in this band. In the N band, there is no clear evidence for dust emission from VLTI/MATISSE correlated flux and Spitzer data. On the other side, the modeled shell of ionized gas implies a more compact CSE ($1.13\pm0.02\,R_\star$) and fainter (IR excess of 1\% in the L band). We provide new evidences for a compact CSE of $\ell$ Car and we demonstrate the capabilities of VLTI/MATISSE for determining common properties of CSEs. While the compact CSE of $\ell$ Car is probably of gaseous nature, the tested model of a shell of ionized gas is not able to simultaneously reproduce the IR excess and the interferometric observations. Further Galactic Cepheids observations with VLTI/MATISSE are necessary for determining the properties of CSEs, which may also depend on both the pulsation period and the evolutionary state of the stars.

astro-ph.SR↗

Progress of the CHARA/SPICA project

CHARA/SPICA (Stellar Parameters and Images with a Cophased Array) is currently being developed at Observatoire de la Côte d'Azur. It will be installed at the visible focus of the CHARA Array by the end of 2021. It has been designed to perform a large survey of fundamental stellar parameters with, in the possible cases, a detailed imaging of the surface or environment of stars. To reach the required precision and sensitivity, CHARA/SPICA combines a low spectral resolution mode R = 140 in the visible and single-mode fibers fed by the AO stages of CHARA. This setup generates additional needs before the interferometric combination: the compensation of atmospheric refraction and longitudinal dispersion, and the fringe stabilization. In this paper, we present the main features of the 6-telescopes fibered visible beam combiner (SPICA-VIS) together with the first laboratory and on-sky results of the fringe tracker (SPICA-FT). We describe also the new fringe-tracker simulator developed in parallel to SPICA-FT.

astro-ph.IM↗

A catalogue of stellar diameters and fluxes for mid-infrared interferometry

We present the Mid-infrared stellar Diameters and Fluxes compilation Catalogue (MDFC) dedicated to long-baseline interferometry at mid-infrared wavelengths (3-13 mum). It gathers data for half a million stars, i.e. nearly all the stars of the Hipparcos-Tycho catalogue whose spectral type is reported in the SIMBAD database. We cross-match 26 databases to provide basic information, binarity elements, angular diameter, magnitude and flux in the near and mid-infrared, as well as flags that allow us to identify the potential calibrators. The catalogue covers the entire sky with 465 857 stars, mainly dwarfs and giants from B to M spectral types closer than 18 kpc. The smallest reported values reach 0.16 muJy in L and 0.1 muJy in N for the flux, and 2 microarcsec for the angular diameter. We build 4 lists of calibrator candidates for the L- and N-bands suitable with the Very Large Telescope Interferometer (VLTI) sub- and main arrays using the MATISSE instrument. We identify 1 621 candidates for L and 44 candidates for N with the Auxiliary Telescopes (ATs), 375 candidates for both bands with the ATs, and 259 candidates for both bands with the Unit Telescopes (UTs). Predominantly cool giants, these sources are small and bright enough to belong to the primary lists of calibrator candidates. In the near future, we plan to measure their angular diameter with 1% accuracy.

astro-ph.SR↗

VEGA/CHARA interferometric observations of Cepheids. I. A resolved structure around the prototype classical Cepheid delta Cep in the visible spectral range

The B-W method is used to determine the distance of Cepheids and consists in combining the angular size variations of the star, as derived from infrared surface-brightness relations or interferometry, with its linear size variation, as deduced from visible spectroscopy using the projection factor. While many Cepheids have been intensively observed by infrared beam combiners, only a few have been observed in the visible. This paper is part of a project to observe Cepheids in the visible with interferometry as a counterpart to infrared observations already in hand. Observations of delta Cep itself were secured with the VEGA/CHARA instrument over the full pulsation cycle of the star. These visible interferometric data are consistent in first approximation with a quasi-hydrostatic model of pulsation surrounded by a static circumstellar environment (CSE) with a size of theta_cse=8.9 +/- 3.0 mas and a relative flux contribution of f_cse=0.07+/-0.01. A model of visible nebula (a background source filling the field of view of the interferometer) with the same relative flux contribution is also consistent with our data at small spatial frequencies. However, in both cases, we find discrepancies in the squared visibilities at high spatial frequencies (maximum 2sigma) with two different regimes over the pulsation cycle of the star, phi=0.0-0.8 and phi=0.8-1.0. We provide several hypotheses to explain these discrepancies, but more observations and theoretical investigations are necessary before a firm conclusion can be drawn. For the first time we have been able to detect in the visible domain a resolved structure around delta~Cep. We have also shown that a simple model cannot explain the observations, and more work will be necessary in the future, both on observations and modelling.

astro-ph.SR↗

An overview of the mid-infrared spectro-interferometer MATISSE: science, concept, and current status

MATISSE is the second-generation mid-infrared spectrograph and imager for the Very Large Telescope Interferometer (VLTI) at Paranal. This new interferometric instrument will allow significant advances by opening new avenues in various fundamental research fields: studying the planet-forming region of disks around young stellar objects, understanding the surface structures and mass loss phenomena affecting evolved stars, and probing the environments of black holes in active galactic nuclei. As a first breakthrough, MATISSE will enlarge the spectral domain of current optical interferometers by offering the L and M bands in addition to the N band. This will open a wide wavelength domain, ranging from 2.8 to 13 um, exploring angular scales as small as 3 mas (L band) / 10 mas (N band). As a second breakthrough, MATISSE will allow mid-infrared imaging - closure-phase aperture-synthesis imaging - with up to four Unit Telescopes (UT) or Auxiliary Telescopes (AT) of the VLTI. Moreover, MATISSE will offer a spectral resolution range from R ~ 30 to R ~ 5000. Here, we present one of the main science objectives, the study of protoplanetary disks, that has driven the instrument design and motivated several VLTI upgrades (GRA4MAT and NAOMI). We introduce the physical concept of MATISSE including a description of the signal on the detectors and an evaluation of the expected performances. We also discuss the current status of the MATISSE instrument, which is entering its testing phase, and the foreseen schedule for the next two years that will lead to the first light at Paranal.

astro-ph.IM↗

MATISSE: specifications and expected performances

MATISSE (Multi AperTure mid-Infrared SpectroScopic Experiment) is the next generation spectro-interferometer at the European Southern Observatory VLTI operating in the spectral bands L, M and N, and combining four beams from the unit and auxiliary telescopes. MATISSE is now fully integrated at the Observatoire de la Côte d'Azur in Nice (France), and has entered very recently its testing phase in laboratory. This paper summarizes the equations describing the MATISSE signal and the associated sources of noise. The specifications and the expected performances of the instrument are then evaluated taking into account the current characteristics of the instrument and the VLTI infrastructure, including transmission and contrast degradation budgets. In addition, we present the different MATISSE simulation tools that will be made available to the future users.

astro-ph.IM↗

Spectral and spatial imaging of the Be+sdO binary phi Persei

The rapidly rotating Be star phi Persei was spun up by mass and angular momentum transfer from a now stripped-down, hot subdwarf companion. Here we present the first high angular resolution images of phi Persei made possible by new capabilities in longbaseline interferometry at near-IR and visible wavelengths. We observed phi Persei with the MIRC and VEGA instruments of the CHARA Array. Additional MIRC-only observations were performed to track the orbital motion of the companion, and these were fit together with new and existing radial velocity measurements of both stars to derive the complete orbital elements and distance. The hot subdwarf companion is clearly detected in the near-IR data at each epoch of observation with a flux contribution of 1.5% in the H band, and restricted fits indicate that its flux contribution rises to 3.3% in the visible. A new binary orbital solution is determined by combining the astrometric and radial velocity measurements. The derived stellar masses are 9.6+-0.3Msol and 1.2+-0.2Msol for the Be primary and subdwarf secondary, respectively. The inferred distance (186 +- 3 pc), kinematical properties, and evolutionary state are consistent with membership of phi Persei in the alpha Per cluster. From the cluster age we deduce significant constraints on the initial masses and evolutionary mass transfer processes that transformed the phi Persei binary system. The interferometric data place strong constraints on the Be disk elongation, orientation, and kinematics, and the disk angular momentum vector is coaligned with and has the same sense of rotation as the orbital angular momentum vector. The VEGA visible continuum data indicate an elongated shape for the Be star itself, due to the combined effects of rapid rotation, partial obscuration of the photosphere by the circumstellar disk, and flux from the bright inner disk.

astro-ph.SR↗

Benchmark stars for Gaia: fundamental properties of the Population II star HD140283 from interferometric, spectroscopic and photometric data

We determined the fundamental properties of HD 140283 by obtaining new interferometric and spectroscopic measurements and combining them with photometry from the literature. The interferometric measurements were obtained using the visible interferometer VEGA on the CHARA array and we determined a 1D limb-darkened angular diameter of 0.353 +/- 0.013 milliarcseconds. Using photometry from the literature we derived the bolometric flux with two solutions: a zero-reddening one of Fbol = 3.890 +/- 0.066 1E-8 erg/s/cm2 and a solution with a maximum of Av = 0.1 mag, Fbol= 4.220 +/- 0.067 1E-8 erg/s/cm2. The interferometric Teff is thus 5534 +/- 103 K or 5647 +/- 105 K and its radius is R = 2.21 +/- 0.08 Rsol. Spectroscopic measurements of HD140283 were obtained using HARPS, NARVAL, and UVES and a 1D LTE analysis of H-alpha line wings yields Teff(Halpha) = 5626 +/- 75 K. Using fine-tuned stellar models including diffusion of elements we then determined the mass M and age t of HD140283. Once the metallicity has been fixed, the age of the star depends on M, initial helium abundance Yi and mixing-length parameter alpha, only two of which are independent. We need to adjust alpha to much lower values than the solar one (~2) in order to fit the observations, and if Av = 0.0 mag then 0.5 < alpha < 1. We give an equation to estimate t from M, Yi (alpha) and Av. Establishing a reference alpha = 1.00 and adopting Yi = 0.245 we derive a mass and age of HD140283: M = 0.780 +/- 0.010 Msol and t = 13.7 +/- 0.7 Gyr (Av = 0.0) or M = 0.805 +/- 0.010 Msol and t = 12.2 +/- 0.6 Gyr (Av=0.1 mag). Our stellar models yield an initial metallicity of [Z/X]i = -1.70 and logg = 3.65 +/- 0.03. Asteroseismic observations are critical for overcoming limitations in our results.

astro-ph.SR↗

The Carlina-type diluted telescope: Stellar fringes on Deneb

Context. The performance of interferometers has largely been increased over the last ten years. But the number of observable objects is still limited due to the low sensitivity and imaging capability of the current facilities. Studies have been done to propose a new generation of interferometers. Aims. The Carlina concept studied at the Haute-Provence Observatory consists in an optical interferometer configured as a diluted version of the Arecibo radio telescope: above the diluted primary mirror made of fixed co-spherical segments, a helium balloon or cables suspended between two mountains and/or pylons, carries a gondola containing the focal optics. This concept does not require delay lines. Methods. Since 2003, we have been building a technical demonstrator of this diluted telescope. The main goals of this project were to find the opto-mechanical solutions to stabilize the optics attached under cables at several tens of meters above the ground, and to characterize this diluted telescope under real conditions. In 2012, we have obtained metrology fringes, and co-spherized the primary mirrors within one micron accuracy. In 2013, we have tested the whole optical train: servo loop, metrology, and the focal gondola. Results. We obtained stellar fringes on Deneb in September 2013. In this paper, we present the characteristics of these observations: quality of the guiding, S /N reached, and possible improvements for a future system. Conclusions. It is an important step that demonstrates the feasibility of building a diluted telescope using cables strained between cliffs or pylons. Carlina, like the MMT or LBT, could be one of the first members of a new class of telescopes named Large Diluted Telescopes. Its optical architecture has many advantages for future projects: Planet Formation Imager, Post-ELTs, Interferometer in space.

astro-ph.IM↗

The diameter of the CoRoT target HD 49933. Combining the 3D limb darkening, asteroseismology, and interferometry

Context. The interpretation of stellar pulsations in terms of internal structure depends on the knowledge of the fundamental stellar parameters. Long-base interferometers permit us to determine very accurate stellar radii, which are independent constraints for stellar models that help us to locate the star in the HR diagram. Aims: Using a direct interferometric determination of the angular diameter and advanced three-dimensional (3D) modeling, we derive the radius of the CoRoT target HD 49933 and reduce the global stellar parameter space compatible with seismic data. Methods: The VEGA/CHARA spectro-interferometer is used to measure the angular diameter of the star. A 3D radiative hydrodynamical simulation of the surface is performed to compute the limb darkening and derive a reliable diameter from visibility curves. The other fundamental stellar parameters (mass, age, and Teff) are found by fitting the large and small p-mode frequency separations using a stellar evolution model that includes microscopic diffusion. Results: We obtain a limb-darkened angular diameter of θLD = 0.445 \pm 0.012 mas. With the Hipparcos parallax, we obtain a radius of R = 1.42 \pm 0.04 Rsun. The corresponding stellar evolution model that fits both large and small frequency separations has a mass of 1.20 \pm 0.08 Msun and an age of 2.7 Gy. The atmospheric parameters are Teff = 6640 \pm 100 K, log g = 4.21 \pm 0.14, and [Fe/H] = -0.38.

astro-ph.SR↗

Chromosphere of K giant stars Geometrical extent and spatial structure detection

We aim to constrain the geometrical extent of the chromosphere of non-binary K giant stars and detect any spatial structures in the chromosphere. We performed observations with the CHARA interferometer and the VEGA beam combiner at optical wavelengths. We observed seven non-binary K giant stars. We measured the ratio of the radii of the photosphere to the chromosphere using the interferometric measurements in the Halpha and the Ca II infrared triplet line cores. For beta Ceti, spectro-interferometric observations are compared to an non-local thermal equilibrium (NLTE) semi-empirical model atmosphere including a chromosphere. The NLTE computations provide line intensities and contribution functions that indicate the relative locations where the line cores are formed and can constrain the size of the limb-darkened disk of the stars with chromospheres. We measured the angular diameter of seven K giant stars and deduced their fundamental parameters: effective temperatures, radii, luminosities, and masses. We determined the geometrical extent of the chromosphere for four giant stars. The chromosphere extents obtained range between 16% to 47% of the stellar radius. The NLTE computations confirm that the Ca II/849 nm line core is deeper in the chromosphere of ? Cet than either of the Ca II/854 nm and Ca II/866 nm line cores. We present a modified version of a semi-empirical model atmosphere derived by fitting the Ca II triplet line cores of this star. In four of our targets, we also detect the signature of a differential signal showing the presence of asymmetries in the chromospheres. Conclusions. It is the first time that geometrical extents and structure in the chromospheres of non-binary K giant stars are determined by interferometry. These observations provide strong constrains on stellar atmosphere models.

astro-ph.SR↗

An investigation of the close environment of beta Cep with the VEGA/CHARA interferometer

High-precision interferometric measurements of pulsating stars help to characterize their close environment. In 1974, a close companion was discovered around the pulsating star beta Cep using the speckle interferometry technique and features at the limit of resolution (20 milli-arcsecond or mas) of the instrument were mentioned that may be due to circumstellar material. Beta Cep has a magnetic field that might be responsible for a spherical shell or ring-like structure around the star as described by the MHD models. Using the visible recombiner VEGA installed on the CHARA long-baseline interferometer at Mt. Wilson, we aim to determine the angular diameter of beta Cep and resolve its close environment with a spatial resolution up to 1 mas level. Medium spectral resolution (R=6000) observations of beta Cep were secured with the VEGA instrument over the years 2008 and 2009. These observations were performed with the S1S2 (30m) and W1W2 (100m) baselines of the array. We investigated several models to reproduce our observations. A large-scale structure of a few mas is clearly detected around the star with a typical flux relative contribution of 0.23 +- 0.02. Our best model is a co-rotational geometrical thin ring around the star as predicted by magnetically-confined wind shock models. The ring inner diameter is 8.2 +- 0.8 mas and the width is 0.6 +- 0.7 mas. The orientation of the rotation axis on the plane of the sky is PA = 60 +- 1 deg, while the best fit of the mean angular diameter of beta Cep gives UD[V] = 0.22 +- 0.05 mas. Our data are compatible with the predicted position of the close companion of beta Cep. These results bring additional constraints on the fundamental parameters and on the future MHD and asteroseismological models of the star.

astro-ph.SR↗

Pioneer 10 Doppler data analysis: disentangling periodic and secular anomalies

This paper reports the results of an analysis of the Doppler tracking data of Pioneer probes which did show an anomalous behaviour. A software has been developed for the sake of performing a data analysis as independent as possible from that of J. Anderson et al. \citep{anderson}, using the same data set. A first output of this new analysis is a confirmation of the existence of a secular anomaly with an amplitude about 0.8 nms$^{-2}$ compatible with that reported by Anderson et al. A second output is the study of periodic variations of the anomaly, which we characterize as functions of the azimuthal angle $φ$ defined by the directions Sun-Earth Antenna and Sun-Pioneer. An improved fit is obtained with periodic variations written as the sum of a secular acceleration and two sinusoids of the angles $φ$ and $2φ$. The tests which have been performed for assessing the robustness of these results are presented.

gr-qc↗