SearcharxivSearch

arXiv subjects

P. Betti

Publications and source records attributed to P. Betti.

16 recordsLinked to original sources

Testing Heavy Dark Matter Decay as the Origin of KM3-230213A

This work explores the hypothesis that the ultra-high-energy neutrino event KM3-230213A originates from the decay of a heavy dark matter particle with a mass above PeV scale. The analysis exploits the deposited energy and arrival direction of the event as well as a complete detector Monte Carlo simulation to compute the expected signal distributions for different decay channels and assesses the relative contributions from Galactic and extragalactic dark matter. Assuming a dark matter origin of the event, we find that the preferred mass at 95% C.L. is larger than about 100 PeV in all scenarios considered, with best-fit lifetimes in the range $10^{26}$-$10^{27}$ s. These preferred regions are in tension with existing bounds from other neutrino telescopes and gamma-ray observations.

hep-ex

Atmospheric neutrino constraints on Lorentz invariance violation with the first six detection units of KM3NeT/ORCA

Lorentz invariance is a fundamental symmetry underlying both the Standard Model of particle physics and General Relativity. Testing its validity provides a direct means of searching for new physics emerging near the Planck scale. A search for isotropic Lorentz invariance violation with 1.4 years of atmospheric neutrino data collected by a partial configuration of the KM3NeT/ORCA detector comprising six detection units is presented. No evidence for such violation is found; thus, competitive limits are set on a subset of isotropic Lorentz invariance violating coefficients, which complement and extend existing experimental constraints.

hep-ex

Optimizing the potential of KM3NeT in detecting core-collapse supernovae

Core-collapse supernovae mark the end of life of massive stars. However, despite their importance in astrophysics, their underlying mechanisms remain unclear. Neutrinos that emerge from the dense core of the star offer a promising way to study supernova dynamics. A strategy is presented to improve the potential of the KM3NeT neutrino telescope to detect core-collapse supernovae in our Galaxy or the Large Magellanic Cloud by further exploiting the properties of its optical modules equipped with multiple photomultipliers. A supernova burst is expected to produce a sudden hit rate increase in the KM3NeT detectors. New observables have been defined for individual optical modules that exploit the geometry and time distribution of the detected hits, enabling a better discrimination between signal and background signatures. In addition, a thorough investigation of the related systematic uncertainties is presented for the first time. When implemented, this new methodology allowed KM3NeT to probe 46% more Galactic core-collapse supernova candidates than with the previous trigger strategy, reaching the dense Galactic bulge. It is now expected that, once completed, KM3NeT will achieve full Galactic sensitivity to core-collapse supernovae.

astro-ph.HE

Search for an eV-scale sterile neutrino with the first six detection units of KM3NeT/ORCA

The existence of an eV-scale sterile neutrino has been proposed to explain several anomalous experimental results obtained over the course of the past 25 years. The first search for such a sterile neutrino conducted with data from KM3NeT/ORCA -- a water Cherenkov neutrino telescope under construction at the bottom of the Mediterranean Sea -- is reported in this paper. GeV-scale atmospheric neutrino oscillations are measured by reconstructing the energy and arrival direction of up-going neutrinos that have traversed the Earth. This study is based on a data sample containing 5828 neutrino candidates collected with 6 detection units ($5\%$ of the complete detector), corresponding to an exposure of 433 kton-years. From the expected effect of an eV-scale sterile neutrino on the first $\nu_\mu \rightarrow \nu_\tau$ standard oscillation maximum, simultaneous constraints are put on the magnitude of the $U_{\mu 4}$ and $U_{\tau 4}$ mixing elements assuming $\Delta m^2_{41} \geq 1$ eV$^2$. The results are compatible with the absence of mixing between active neutrinos and a sterile state, with $|U_{\mu 4}|^2 < 0.138$ and $|U_{\tau 4}|^2 < 0.076$ at a $90\%$ confidence level. Such constraints are compatible with the results reported by other long-baseline experiments, and indicate that with KM3NeT/ORCA it is possible to bring crucial contributions to sterile neutrino searches in the coming years.

hep-ex

Constraining gamma-ray burst parameters with the first ultra-high energy neutrino event KM3-230213A

Context: The detection of the highest energy neutrino observed to date by KM3NeT, with an estimated energy of 220 PeV, opens up new possibilities for the study and identification of the astrophysical sources responsible for a diffuse flux of such ultra-high-energy neutrinos, among which gamma-ray bursts are longstanding candidates. Aims: Based on the event KM3-230213A, we derive constraints on the baryon loading and density of the surrounding environment in models of blastwaves in long-duration gamma-ray bursts. Methods: We compute the diffuse flux from gamma-ray burst blastwaves, either expanding in a constant density interstellar medium or developing in a radially decreasing density of a wind-like environment surrounding the gamma-ray burst progenitor star, by taking into account the expected neutrino spectra and luminosity function. We use a Poisson likelihood method to constrain the blastwave model parameters by calculating the expected number of neutrino events within the 90% confidence level energy range of KM3-230213A and by using the joint exposure of KM3NeT/ARCA, IceCube and Pierre Auger. Results: We constrain the baryon loading to be $\leq \{392, 131, 39, 13\}$ at 90% confidence level, which is inversely proportional to a varying interstellar medium particle density of $\{1, 3, 10, 30\}$ cm$^{-3}$. In the wind-like environment case, the baryon loading is $\leq \{20, 50, 100\}$ at 90% confidence level, which is proportional to the sixth power of a varying density parameter of $\{0.05, 0.06, 0.07\}$.

astro-ph.HE

Precision spectral measurements of Chromium and Titanium from 10 to 250 GeV$/n$ and sub-Iron to Iron ratio with the Calorimetric Electron Telescope on the ISS

The Calorimetric Electron Telescope (CALET), in operation on the International Space Station since 2015, collected a large sample of cosmic-ray (CR) iron and sub-iron events over a wide energy interval. In this paper we report an update of our previous measurement of the iron flux and we present - for the first time - a high statistics measurement of the spectra of two sub-iron elements Cr and Ti in the energy interval from 10 to 250 GeV/n. The analyses are based on 8 years of data. Differently from older generations of cosmic-ray instruments which, in most cases, could not resolve individual sub-iron elements, CALET can identify each nuclear species from proton to nickel (and beyond) with a measurement of their electric charge. Thanks to the improvement in statistics and a more refined assessment of systematic uncertainties, the iron spectral shape is better resolved, at high energy, than in our previous paper and we report its flux ratio to chromium and titanium. The measured fluxes of Cr and Ti show energy dependences compatible with a single power law with spectral indices $-2.74 \pm 0.06$ and $-2.88 \pm 0.06$, respectively.

astro-ph.HE

The Online Data Filter for the KM3NeT Neutrino Telescopes

The KM3NeT research infrastructure comprises two neutrino telescopes located in the deep waters of the Mediterranean Sea, namely ORCA and ARCA. KM3NeT/ORCA is designed for the measurement of neutrino properties and KM3NeT/ARCA for the detection of high-energy neutrinos from the cosmos. Neutrinos are indirectly detected using three-dimensional arrays of photo-sensors which detect the Cherenkov light that is produced when relativistic charged particles emerge from a neutrino interaction. The analogue pulses from the photo-sensors are digitised offshore and all digital data are sent to a station on shore where they are processed in real time using a farm of commodity servers and custom software. In this paper, the design and performance of the software that is used to filter the data are presented. The performance of the data filter is evaluated in terms of its efficiency, purity and capacity. The efficiency is measured by the effective volumes of the sensor arrays as a function of the energy of the neutrino. The purity is measured by a comparison of the event rate caused by muons produced by cosmic ray interactions in the Earth's atmosphere with the event rate caused by the background from decays of radioactive elements in the sea water and bioluminescence. The capacity is measured by the minimal number of servers that is needed to sustain the rate of incoming data. The results of these evaluations comply with all specifications. The count rates of all photo-sensors are measured with a sampling frequency of 10 Hz. These data are input to the simulations of the detector response and will also be made available for interdisciplinary research.

astro-ph.IM

KM3NeT Constraint on Lorentz-Violating Superluminal Neutrino Velocity

Lorentz invariance is a fundamental symmetry of spacetime and foundational to modern physics. One of its most important consequences is the constancy of the speed of light. This invariance, together with the geometry of spacetime, implies that no particle can move faster than the speed of light. In this article, we present the most stringent neutrino-based test of this prediction, using the highest energy neutrino ever detected to date, KM3-230213A. The arrival of this event, with an energy of $220^{+570}_{-110}\,\text{PeV}$, sets a constraint on $\delta \equiv c_\nu^2-1 < 4\times10^{-22}$.

astro-ph.HE

The ultra-high-energy event KM3-230213A within the global neutrino landscape

On February 13th, 2023, the KM3NeT/ARCA telescope detected a neutrino candidate with an estimated energy in the hundreds of PeVs. In this article, the observation of this ultra-high-energy neutrino is discussed in light of null observations above tens of PeV from the IceCube and Pierre Auger observatories. Performing a joint fit of all experiments under the assumption of an isotropic $E^{-2}$ flux, the best-fit single-flavour flux normalisation is $E^2 \Phi^{\rm 1f}_{\nu + \bar \nu} = 7.5 \times 10^{-10}~{\rm GeV cm^{-2} s^{-1} sr^{-1}}$ in the 90% energy range of the KM3NeT event. Furthermore, the ultra-high-energy data are then fit together with the IceCube measurements at lower energies, either with a single power law or with a broken power law, allowing for the presence of a new component in the spectrum. The joint fit including non-observations by other experiments in the ultra-high-energy region shows a slight preference for a break in the PeV regime if the ``High-Energy Starting Events'' sample is included, and no such preference for the other two IceCube samples investigated. A stronger preference for a break appears if only the KM3NeT data is considered in the ultra-high-energy region, though the flux resulting from such a fit would be inconsistent with null observations from IceCube and Pierre Auger. In all cases, the observed tension between KM3NeT and other datasets is of the order of $2.5\sigma-3\sigma$, and increased statistics are required to resolve this apparent tension and better characterise the neutrino landscape at ultra-high energies.

astro-ph.HE

On the Potential Galactic Origin of the Ultra-High-Energy Event KM3-230213A

The KM3NeT observatory detected the most energetic neutrino candidate ever observed, with an energy between 72 PeV and 2.6 EeV at the 90% confidence level. The observed neutrino is likely of cosmic origin. In this article, it is investigated if the neutrino could have been produced within the Milky Way. Considering the low fluxes of the Galactic diffuse emission at these energies, the lack of a nearby potential Galactic particle accelerator in the direction of the event and the difficulty to accelerate particles to such high energies in Galactic systems, we conclude that if the event is indeed cosmic, it is most likely of extragalactic origin.

astro-ph.HE

Development of a High-Resolution, High-Dynamic-Range Charge Detector for Ion Beam Monitoring

We present an innovative charge detector with high resolution and wide dynamic range designed to fulfill the requirements of a monitoring system for a high energy ion beam. The detector prototype, constructed using Si photodiodes and a custom readout electronics, underwent extensive testing during HERD and AMS beam tests at CERN SPS facilities. Initial testing showcased the detector's exceptional performance, emphasizing both high resolution and a dynamic range capable of measuring nuclei with atomic numbers ranging from 1 to 80. The prototype's compatibility with fast, quasi real-time data analysis qualifies it as an ideal candidate for online applications. This article presents the results from the testing phase of the prototype, highlighting its capabilities and performance. Ongoing detector development, potential applications, and future developments aimed at enhancing the detector's functionality and versatility are also discussed.

physics.ins-det

Performance assessment of the HERD calorimeter with a photo-diode read-out system for high-energy electron beams

The measurement of cosmic rays at energies exceeding 100 TeV per nucleon is crucial for enhancing the understanding of high-energy particle propagation and acceleration models in the Galaxy. HERD is a space-borne calorimetric experiment that aims to extend the current direct measurements of cosmic rays to unexplored energies. The payload is scheduled to be installed on the Chinese Space Station in 2027. The primary peculiarity of the instrument is its capability to measure particles coming from all directions, with the main detector being a deep, homogeneous, 3D calorimeter. The active elements are read out using two independent systems: one based on wavelength shifter fibers coupled to CMOS cameras, and the other based on photo-diodes read-out with custom front-end electronics. A large calorimeter prototype was tested in 2023 during an extensive beam test campaign at CERN. In this paper, the performance of the calorimeter for high-energy electron beams, as obtained from the photo-diode system data, is presented. The prototype demonstrated excellent performance, e.g., an energy resolution better than 1% for electrons at 250 GeV. A comparison between beam test data and Monte Carlo simulation data is also presented.

physics.ins-det

Development of the photo-diode subsystem for the HERD calorimeter double-readout

The measurement of cosmic-ray individual spectra provides unique information regarding the origin and propagation of astro-particles. Due to the limited acceptance of current space experiments, protons and nuclei around the "knee" region ($\sim1\ PeV$) can only be observed by ground based experiments. Thanks to an innovative design, the High Energy cosmic-Radiation Detection (HERD) facility will allow direct observation up to this energy region: the instrument is mainly based on a 3D segmented, isotropic and homogeneous calorimeter which properly measures the energy of particles coming from each direction and it will be made of about 7500 LYSO cubic crystals. The read-out of the scintillation light is done with two independent systems: the first one based on wave-length shifting fibers coupled to Intensified scientific CMOS cameras, the second one is made of two photo-diodes with different active areas connected to a custom front-end electronics. This photo-diode system is designed to achieve a huge dynamic range, larger than $10^7$, while having a small power consumption, few mW per channel. Thanks to a good signal-to-noise ratio, the capability of a proper calibration, by using signals of both non-interacting and showering particles, is also guaranteed. In this paper, the current design and the performance obtained by several tests of the photo-diode read-out system are discussed.

physics.ins-det

Light yield non-proportionality of inorganic crystals and its effect on cosmic-ray measurements

The multi-TeV energy region of the cosmic-ray spectra has been recently explored by direct detection experiments that used calorimetric techniques to measure the energy of the cosmic particles. Interesting spectral features have been observed in both all-electron and nuclei spectra. However, the interpretation of the results is compromised by the disagreements between the data obtained from the various experiments, that are not reconcilable with the quoted experimental uncertainties. Understanding the reason for the discrepancy among the measurements is of fundamental importance in view of the forthcoming high-energy cosmic-ray experiments planned for space, as well as for the correct interpretation of the available results. The purpose of this work is to investigate the possibility that a systematic effect may derive from the non-proportionality of the light response of inorganic crystals, typically used in high-energy calorimetry due to their excellent energy-resolution performance. The main reason for the non-proportionality of the crystals is that scintillation light yield depends on ionisation density. Experimental data obtained with ion beams were used to characterize the light response of various scintillator materials. The obtained luminous efficiencies were used as input of a Monte Carlo simulation to perform a comparative study of the effect of the light-yield non-proportionality on the detection of high-energy electromagnetic and hadronic showers. The result of this study indicates that, if the calorimeter response is calibrated by using the energy deposit of minimum ionizing particles, the measured shower energy might be affected by a significant systematic shift, at the level of few percent, whose sign and magnitude depend specifically on the type of scintillator material used.

astro-ph.HE

Surface spin-flop transition in a uniaxial antiferromagnetic Fe/Cr superlattice induced by a magnetic field of arbitrary direction

We studied the transition between the antiferromagnetic and the surface spin-flop phases of a uniaxial antiferromagnetic [Fe(14 Å)/Cr(11 Å]$_{\rm x20}$ superlattice. For external fields applied parallel to the in-plane easy axis, the layer-by-layer configuration, calculated in the framework of a mean-field one-dimensional model, was benchmarked against published polarized neutron reflectivity data. For an in-plane field $H$ applied at an angle $ψ\ne 0$ with the easy axis, magnetometry shows that the magnetization $M$ vanishes at H=0, then increases slowly with increasing $H$. At a critical value of $H$, a finite jump in $M(H)$ is observed for $ψ<5^{\rm o}$, while a smooth increase of $M$ $vs$ $H$ is found for $ψ>5^{\rm o}$. A dramatic increase in the full width at half maximum of the magnetic susceptibility is observed for $ψ\ge 5^{\rm o}$. The phase diagram obtained from micromagnetic calculations displays a first-order transition to a surface spin-flop phase for low $ψ$ values, while the transition becomes continuous for $ψ$ greater than a critical angle, $ψ_{\rm max} \approx 4.75^{\rm o}$. This is in fair agreement with the experimentally observed results.

cond-mat.mtrl-sci

Surface magnetic canting in a ferromagnet

The surface magnetic canting (SMC) of a semi-infinite film with ferromagnetic exchange interaction and competing bulk and surface anisotropies is investigated via a nonlinear mapping formulation of mean-field theory previously developed by our group [L. Trallori et al., Int. J. Mod. Phys. B 10, 1935-1988 (1996)], and extended to the case where an external magnetic field is applied to the system. When the field H is parallel to the film plane, the condition for SMC is found to be the same as that recently reported by Popov and Pappas [Phys. Rev. B 64, 184401 (2001)]. The case of a field H applied perpendicularly to the film plane is also investigated. In both cases, the zero-temperature equilibrium configuration is easily determined by our theoretical approach.

cond-mat.mtrl-sci