arXiv subjects

P. Bunyk

Publications and source records attributed to P. Bunyk.

17 recordsLinked to original sources

arXiv2019

Demonstration of nonstoquastic Hamiltonian in coupled superconducting flux qubits

Quantum annealing (QA) is a heuristic algorithm for finding low-energy configurations of a system, with applications in optimization, machine learning, and quantum simulation. Up to now, all implementations of QA have been limited to qubits coupled via a single degree of freedom. This gives rise to a stoquastic Hamiltonian that has no sign problem in quantum Monte Carlo (QMC) simulations. In this paper, we report implementation and measurements of two superconducting flux qubits coupled via two canonically conjugate degrees of freedom (charge and flux) to achieve a nonstoquastic Hamiltonian. Such coupling can enhance performance of QA processors, extend the range of quantum simulations. We perform microwave spectroscopy to extract circuit parameters and show that the charge coupling manifests itself as a YY interaction in the computational basis. We observe destructive interference in quantum coherent oscillations between the computational basis states of the two-qubit system. Finally, we show that the extracted Hamiltonian is nonstoquastic over a wide range of parameters.

quant-ph↗

arXiv2016

A frequency and sensitivity tunable microresonator array for high-speed quantum processor readout

Superconducting microresonators have been successfully utilized as detection elements for a wide variety of applications. With multiplexing factors exceeding 1,000 detectors per transmission line, they are the most scalable low-temperature detector technology demonstrated to date. For high-throughput applications, fewer detectors can be coupled to a single wire but utilize a larger per-detector bandwidth. For all existing designs, fluctuations in fabrication tolerances result in a non-uniform shift in resonance frequency and sensitivity, which ultimately limits the efficiency of band-width utilization. Here we present the design, implementation, and initial characterization of a superconducting microresonator readout integrating two tunable inductances per detector. We demonstrate that these tuning elements provide independent control of both the detector frequency and sensitivity, allowing us to maximize the transmission line bandwidth utilization. Finally we discuss the integration of these detectors in a multilayer fabrication stack for high-speed readout of the D-Wave quantum processor, highlighting the use of control and routing circuitry composed of single flux-quantum loops to minimize the number of control wires at the lowest temperature stage.

quant-ph↗

arXiv2014

Entanglement in a quantum annealing processor

Entanglement lies at the core of quantum algorithms designed to solve problems that are intractable by classical approaches. One such algorithm, quantum annealing (QA), provides a promising path to a practical quantum processor. We have built a series of scalable QA processors consisting of networks of manufactured interacting spins (qubits). Here, we use qubit tunneling spectroscopy to measure the energy eigenspectrum of two- and eight-qubit systems within one such processor, demonstrating quantum coherence in these systems. We present experimental evidence that, during a critical portion of QA, the qubits become entangled and that entanglement persists even as these systems reach equilibrium with a thermal environment. Our results provide an encouraging sign that QA is a viable technology for large-scale quantum computing.

quant-ph↗

arXiv2013

Tunneling spectroscopy using a probe qubit

We describe a quantum tunneling spectroscopy technique that requires only low bandwidth control. The method involves coupling a probe qubit to the system under study to create a localized probe state. The energy of the probe state is then scanned with respect to the unperturbed energy levels of the probed system. Incoherent tunneling transitions that flip the state of the probe qubit occur when the energy bias of the probe is close to an eigenenergy of the probed system. Monitoring these transitions allows the reconstruction of the probed system eigenspectrum. We demonstrate this method on an rf SQUID flux qubit.

cond-mat.supr-con↗

arXiv2011

Probing High Frequency Noise with Macroscopic Resonant Tunneling

We have developed a method for extracting the high-frequency noise spectral density of an rf-SQUID flux qubit from macroscopic resonant tunneling (MRT) rate measurements. The extracted noise spectral density is consistent with that of an ohmic environment up to frequencies ~ 4 GHz. We have also derived an expression for the MRT lineshape expected for a noise spectral density consisting of such a broadband ohmic component and an additional strongly peaked low-frequency component. This hybrid model provides an excellent fit to experimental data across a range of tunneling amplitudes and temperatures.

cond-mat.supr-con↗

arXiv2010

A scalable readout system for a superconducting adiabatic quantum optimization system

We have designed, fabricated and tested an XY-addressable readout system that is specifically tailored for the reading of superconducting flux qubits in an integrated circuit that could enable adiabatic quantum optimization. In such a system, the flux qubits only need to be read at the end of an adiabatic evolution when quantum mechanical tunneling has been suppressed, thus simplifying many aspects of the readout process. The readout architecture for an $N$-qubit adiabatic quantum optimization system comprises $N$ hysteretic dc SQUIDs and $N$ rf SQUID latches controlled by $2\sqrt{N} + 2$ bias lines. The latching elements are coupled to the qubits and the dc SQUIDs are then coupled to the latching elements. This readout scheme provides two key advantages: First, the latching elements provide exceptional flux sensitivity that significantly exceeds what may be achieved by directly coupling the flux qubits to the dc SQUIDs using a practical mutual inductance. Second, the states of the latching elements are robust against the influence of ac currents generated by the switching of the hysteretic dc SQUIDs, thus allowing one to interrogate the latching elements repeatedly so as to mitigate the effects of stochastic switching of the dc SQUIDs. We demonstrate that it is possible to achieve single qubit read error rates of $<10^{-6}$ with this readout scheme. We have characterized the system-level performance of a 128-qubit readout system and have measured a readout error probability of $8\times10^{-5}$ in the presence of optimal latching element bias conditions.

cond-mat.supr-con↗

arXiv2010

Experimental Investigation of an Eight Qubit Unit Cell in a Superconducting Optimization Processor

A superconducting chip containing a regular array of flux qubits, tunable interqubit inductive couplers, an XY-addressable readout system, on-chip programmable magnetic memory, and a sparse network of analog control lines has been studied. The architecture of the chip and the infrastructure used to control it were designed to facilitate the implementation of an adiabatic quantum optimization algorithm. The performance of an eight-qubit unit cell on this chip has been characterized by measuring its success in solving a large set of random Ising spin glass problem instances as a function of temperature. The experimental data are consistent with the predictions of a quantum mechanical model of an eight-qubit system coupled to a thermal environment. These results highlight many of the key practical challenges that we have overcome and those that lie ahead in the quest to realize a functional large scale adiabatic quantum information processor.

cond-mat.supr-con↗

arXiv2010

Observation of Co-tunneling in Pairs of Coupled Flux Qubits

We report measurements of macroscopic resonant tunneling between the two lowest energy states of a pair of magnetically coupled rf-SQUID flux qubits. This technique provides a direct means of observing two-qubit dynamics and a probe of the environment coupled to the pair of qubits. Measurements of the tunneling rate as a function of qubit flux bias show a Gaussian line shape that is well matched to theoretical predictions. Moreover, the peak widths indicate that each qubit is coupled to a local environment whose fluctuations are uncorrelated with that of the other qubit.

cond-mat.supr-con↗

arXiv2010

A scalable control system for a superconducting adiabatic quantum optimization processor

We have designed, fabricated and operated a scalable system for applying independently programmable time-independent, and limited time-dependent flux biases to control superconducting devices in an integrated circuit. Here we report on the operation of a system designed to supply 64 flux biases to devices in a circuit designed to be a unit cell for a superconducting adiabatic quantum optimization system. The system requires six digital address lines, two power lines, and a handful of global analog lines.

quant-ph↗

arXiv2009

Experimental Demonstration of a Robust and Scalable Flux Qubit

A novel rf-SQUID flux qubit that is robust against fabrication variations in Josephson junction critical currents and device inductance has been implemented. Measurements of the persistent current and of the tunneling energy between the two lowest lying states, both in the coherent and incoherent regime, are presented. These experimental results are shown to be in agreement with predictions of a quantum mechanical Hamiltonian whose parameters were independently calibrated, thus justifying the identification of this device as a flux qubit. In addition, measurements of the flux and critical current noise spectral densities are presented that indicate that these devices with Nb wiring are comparable to the best Al wiring rf-SQUIDs reported in the literature thusfar, with a $1/f$ flux noise spectral density at $1 $Hz of $1.3^{+0.7}_{-0.5} μΦ_0/\sqrt{\text{Hz}}$. An explicit formula for converting the observed flux noise spectral density into a free induction decay time for a flux qubit biased to its optimal point and operated in the energy eigenbasis is presented.

cond-mat.supr-con↗

arXiv2009

A Compound Josephson Junction Coupler for Flux Qubits With Minimal Crosstalk

An improved tunable coupling element for building networks of coupled rf-SQUID flux qubits has been experimentally demonstrated. This new form of coupler, based upon the compound Josephson junction rf-SQUID, provides a sign and magnitude tunable mutual inductance between qubits with minimal nonlinear crosstalk from the coupler tuning parameter into the qubits. Quantitative agreement is shown between an effective one-dimensional model of the coupler's potential and measurements of the coupler persistent current and susceptibility.

cond-mat.supr-con↗

arXiv2009

Implementation of a Quantum Annealing Algorithm Using a Superconducting Circuit

A circuit consisting of a network of coupled compound Josephson junction rf-SQUID flux qubits has been used to implement an adiabatic quantum optimization algorithm. It is shown that detailed knowledge of the magnitude of the persistent current as a function of annealing parameters is key to implementation of the algorithm on this particular type of hardware. Experimental results contrasting two annealing protocols, one with and one without active compensation for the growth of the qubit persistent current during annealing, are presented in order to illustrate this point.

cond-mat.mes-hall↗

arXiv2009

Synchronization of Multiple Coupled rf-SQUID Flux Qubits

A practical strategy for synchronizing the properties of compound Josephson junction rf-SQUID qubits on a multiqubit chip has been demonstrated. The impacts of small ($\sim1%$) fabrication variations in qubit inductance and critical current can be minimized by the application of a custom tuned flux offset to the CJJ structure of each qubit. This strategy allows for simultaneous synchronization of the qubit persistent current and tunnel splitting over a range of external bias parameters that is relevant for the implementation of an adiabatic quantum processor.

cond-mat.mes-hall↗

arXiv2008

Geometrical dependence of low frequency noise in superconducting flux qubits

A general method for directly measuring the low-frequency flux noise (below 10 Hz) in compound Josephson junction superconducting flux qubits has been used to study a series of 85 devices of varying design. The variation in flux noise across sets of qubits with identical designs was observed to be small. However, the levels of flux noise systematically varied between qubit designs with strong dependence upon qubit wiring length and wiring width. Furthermore, qubits fabricated above a superconducting ground plane yielded lower noise than qubits without such a layer. These results support the hypothesis that localized magnetic impurities in the vicinity of the qubit wiring are a key source of low frequency flux noise in superconducting devices.

cond-mat.mes-hall↗

arXiv2008

Landau-Zener Transitions in an Adiabatic Quantum Computer

We report an experimental measurement of Landau-Zener transitions on an individual flux qubit within a multi-qubit superconducting chip designed for adiabatic quantum computation. The method used isolates a single qubit, tunes its tunneling amplitude Delta into the limit where Delta is much less than both the temperature T and the decoherence-induced energy level broadening, and forces it to undergo a Landau-Zener transition. We find that the behavior of the qubit agrees to a high degree of accuracy with theoretical predictions for Landau-Zener transition probabilities for a double-well quantum system coupled to 1/f magnetic flux noise.

cond-mat.mes-hall↗

arXiv2008

Probing Noise in Flux Qubits via Macroscopic Resonant Tunneling

Macroscopic resonant tunneling between the two lowest lying states of a bistable RF-SQUID is used to characterize noise in a flux qubit. Measurements of the incoherent decay rate as a function of flux bias revealed a Gaussian shaped profile that is not peaked at the resonance point, but is shifted to a bias at which the initial well is higher than the target well. The r.m.s. amplitude of the noise, which is proportional to the decoherence rate 1/T_2^*, was observed to be weakly dependent on temperature below 70 mK. Analysis of these results indicates that the dominant source of low frequency (1/f) flux noise in this device is a quantum mechanical environment in thermal equilibrium.

cond-mat.mes-hall↗

arXiv2007

Sign- and magnitude-tunable coupler for superconducting flux qubits

We experimentally confirm the functionality of a coupling element for flux-based superconducting qubits, with a coupling strength $J$ whose sign and magnitude can be tuned {\it in situ}. To measure the effective $J$, the groundstate of a coupled two-qubit system has been mapped as a function of the local magnetic fields applied to each qubit. The state of the system is determined by directly reading out the individual qubits while tunneling is suppressed. These measurements demonstrate that $J$ can be tuned from antiferromagnetic through zero to ferromagnetic.

cond-mat.supr-con↗