arXiv subjects

P. C. van der Kruit

Publications and source records attributed to P. C. van der Kruit.

At least 37 records · Page 2Linked to original sources

arXiv2010

The dark matter halo shape of edge-on disk galaxies - II. Modelling the HI observations: methods

This is the second paper of a series in which we attempt to put constraints on the flattening of dark halos in disk galaxies. For this purpose, we observe the HI in edge-on galaxies, where it is in principle possible to measure the force field in the halo vertically and radially from gas layer flaring and rotation curve decomposition respectively. To calculate the force fields, we need to analyse the observed XV diagrams to accurately measure all three functions that describe the planar kinematics and distribution of a galaxy: the radial HI surface density, the rotation curve and the HI velocity dispersion. In this paper, we discuss the improvements and limitations of the methods previously used to measure these HI properties. We extend the constant velocity dispersion method to include determination of the HI velocity dispersion as a function of galactocentric radius and perform extensive tests on the quality of the fits. We will apply this 'radial decomposition XV modelling method' to our HI observations of 8 HI-rich, late-type, edge-on galaxies in the third paper of this series.

astro-ph.GA↗

arXiv2010

The dark matter halo shape of edge-on disk galaxies - III. Modelling the HI observations: results

This is the third paper in a series in which we attempt to put constraints on the flattening of dark halos in disk galaxies. For this purpose we need to analyse the observed XV diagrams in edge-on galaxies to accurately measure the radial HI surface density, the rotation curve and the HI velocity dispersion. We present the results of the modelling of HI observations of 8 HI-rich, late-type, edge-on galaxies. In all of these we find differential rotation. Most systems display HI velocity dispersions of 6.5 to 7.5 km s$^{-1}$ and all except one show radial structure. There is an increase in the mean HI velocity dispersion with maximum rotation velocity, at least up to 120 km s$^{-1}$. Next we analyse the observations to derive the radial variation of the thickness (flaring) of the HI layer. We find that with the exception of the asymmetric IC5052, all of the galaxies in our sample are good candidates for 3D mass modelling to measure the dark halo shape. The flaring profiles are symmetric and have a common shape, increasing linearly inside the stellar disks and exponential outside where the gravitational potential is dominated by the dark halo. In the best example, UGC7321, we find in the inner regions small deviations from the midplane and accompanying increases in thickness of the HI layer that are possibly a result of perturbations by a relatively strong bar.

astro-ph.GA↗

arXiv2010

The dark matter halo shape of edge-on disk galaxies - IV. UGC 7321

This is the fourth paper in a series in which we attempt to put constraints on the flattening of dark halos in disk galaxies. We observed for this purpose the HI in edge-on galaxies, where it is in principle possible to measure the force field in the halo vertically and radially from gas layer flaring and rotation curve decomposition respectively. We have analysed the HI channel maps to accurately measure all four functions that describe the HI kinematics and 3D distribution: the radial HI surface density, the HI vertical thickness, the rotation curve and the HI velocity dispersion. In this paper we analyse these data for the edge-on galaxy UGC7321. We measured the stellar mass distribution ($M=3\times10^8$ \msun with $M/L_R\lesim0.2$), finding that the vertical force of the gas disk dominates the stellar disk at all radii. We find that the vertical force puts a much stronger constraint on the stellar mass-to-light ratio than rotation curve decomposition. Fitting of the vertical force field derived from the flaring and velocity dispersion of the HI revealed that UGC7321 has a spherical halo density distribution with a flattening of $q = c/a = 1.0 \pm 0.1$.

astro-ph.CO↗

arXiv2009

A photodissociation model for the morphology of the HI near OB associations in M33

We present an approach for analysing the morphology and physical properties of Hi features near giant OB asso- ciations in M33, in the context of a model whereby the Hi excess arises from photodissociation of the molecular gas in remnants of the parent Giant Molecular Clouds (GMCs). Examples are presented here in the environs of NGC604 and CPSDPZ204, two prominent Hii regions in M33. These are the first results of a detailed analysis of the environs of a large number of OB associations in that galaxy. We present evidence for "diffusion" of the far-UV radiation from the OB association through a clumpy remnant GMC, and show further that enhanced CO(1-0) emission appears preferentially associated with GMCs of higher volume density.

astro-ph.CO↗

arXiv2008

The Vertical Dust Structure in Spiral Disks

The halo of NGC 891 has been the subject of studies for more than a decade. One of its most striking features is the large asymmetry in H-$α$ emission. We have taken a quantitative look at this asymmetry at different wavelengths for the first time. We propose that NGC 891 is intrinsically almost symmetric, as seen in Spitzer observations, and the large asymmetry in H-$α$ emission is mostly due to dust attenuation. We quantify the additional optical depth needed to cause the observed H-$α$ asymmetry. A comparison of large strips on the North East side of the galaxy with strips covering the same area in the South West we can quantify and analyze the asymmetry in the different wavelengths. From the 24 $μ$m emission we find that the intrinsic asymmetry in star-formation in NGC 891 is small i.e., approximately 30%. The additional asymmetry in H-alpha is modeled as additional symmetric dust attenuation which extends up to ~ 40'' (1.9 kpc) above the plane of the galaxy with a mid-plane value of $τ$=0.8 and a scale height of 0.5 kpc. This observational technique offers the possibility to quantify the effects of vertical ISM disk stability as an explanation for dust lanes in massive galaxies Dalcanton et al. (2004).

astro-ph↗

arXiv2007

The stars and gas in outer parts of galaxy disks: Extended or truncated -- flat or warped?

I review observations of truncations of stellar disks and models for their origin, compare observations of truncations in moderately inclined galaxies to those in edge-on systems and discuss the relation between truncations and HI-warps and their systematics and origin. Truncations are a common feature in edge-on stellar disks, but the relation of truncations in face-on to those in edge-on galaxies needs further clarification. The origin of truncations is most likely related to a maximum in the specific angular momentum in the material that formed the stellar disks, but this model does probably require some redistribution of angular momentum. HI-warps start just beyond the truncation radius and disks and warps appear distinct components. This suggests that inner disks form initially and settle as rigid, very flat structures, while HI-warps result from later infall of gas with a different orientation of the angular momentum.

astro-ph↗

arXiv2007

The Opacity of Spiral Galaxy Disks VIII: Structure of the Cold ISM

The quantity of dust in a spiral disk can be estimated using the dust's typical emission or the extinction of a known source. In this paper, we compare two techniques, one based on emission and one on absorption, applied on sections of fourteen disk galaxies. The two measurements reflect, respectively the average and apparent optical depth of a disk section. Hence, they depend differently on the average number and optical depth of ISM structures in the disk. The small scale geometry of the cold ISM is critical for accurate models of the overall energy budget of spiral disks. ISM geometry, relative contributions of different stellar populations and dust emissivity are all free parameters in galaxy Spectral Energy Distribution (SED) models; they are also sometimes degenerate, depending on wavelength coverage. Our aim is to constrain typical ISM geometry. The apparent optical depth measurement comes from the number of distant galaxies seen in HST images through the foreground disk. We measure the IR flux in images from the {\it Spitzer} Infrared Nearby Galaxy Survey in the same section of the disk that was covered by HST. A physical model of the dust is fit to the SED to estimate the dust surface density, mean temperature, and brightness in these disk sections. The surface density is subsequently converted into the average optical depth estimate. The two measurements generally agree. The ratios between the measured average and apparent optical depths of the disk sections imply optically thin clouds in these disks. Optically thick disks, are likely to have more than a single cloud along the line-of-sight.

astro-ph↗

arXiv2007

A dust component 2 kpc above the plane in NGC 891

The halo of NGC 891 has been the subject of studies for more than a decade. One of its most striking features is the large asymmetry in H$α$ emission. In this letter, we will take a quantitative look at this asymmetry at different wavelengths for the first time. We suggest that NGC 891 is intrinsically almost symmetric and the large asymmetry in H$α$ emission is mostly due to dust attenuation. We will quantify the additional optical depth needed to cause the observed asymmetry in this model. By comparing large strips on the North East side of the galaxy with strips covering the same area in the South West we can quantify and analyze the asymmetry in the different wavelengths. From the 24 $μ$m emission we find that the intrinsic asymmetry in star formation in NGC 891 is small i.e., $\sim 30%$. The additional asymmetry in H$α$ is modeled as additional symmetric dust attenuation which extends up to $\sim$ 40\arcsec (1.9 kpc) above the plane of the galaxy with a mid-plane value of $τ$=0.8 and a scale height of 0.5 kpc

astro-ph↗

arXiv2007

Kinematics of diffuse ionized gas in the disk halo interface of NGC 891 from Fabry-Pérot observations

The properties of the gas in halos of galaxies constrain global models of the interstellar medium. Kinematical information is of particular interest since it is a clue to the origin of the gas. Here we report observations of the kinematics of the thick layer of the diffuse ionized gas in NGC 891 in order to determine the rotation curve of the halo gas. We have obtained a Fabry-Pérot data cube in Halpha to measure the kinematics of the halo gas with angular resolution much higher than obtained from HI 21 cm observations. The data cube was obtained with the TAURUS II spectrograph at the WHT on La Palma. The velocity information of the diffuse ionized gas extracted from the data cube is compared to model distributions to constrain the distribution of the gas and in particular the halo rotation curve. The best fit model has a central attenuation tau_H-alpha=6, a dust scale length of 8.1 kpc, an ionized gas scale length of 5.0 kpc. Above the plane the rotation curve lags with a vertical gradient of -18.8 km/s/kpc. We find that the scale length of the H-alpha must be between 2.5 and 6.5 kpc. Furthermore we find evidence that the rotation curve above the plane rises less steeply than in the plane. This is all in agreement with the velocities measured in the HI.

astro-ph↗

arXiv2007

Truncations of stellar disk and warps of HI-layers in edge-on spiral galaxies

Edge-on spiral galaxies often have stellar disks with relatively sharp truncations and warped HI-layers in the outer parts. Warps appear to start preferentially near the optical boundaries of the disks. Here we make a comparative study of warps and truncations in edge-on galaxies. The Garc\'ıa-Ruiz et al. (2002) sample with extensive HI-mapping is complemented with luminosity distributions from the Sloan Digital Sky Survey. The method to identify truncations has been tested using the sample of edge-on galaxies of van der Kruit & Searle. Results are: (i.) The majority (17 out of 23) of the galaxies show evidence for truncations. (ii.) When an HI-warp is present it starts at 1.1 truncation radii. (iii.) This supplements the rules for warps formulated by Briggs (1990), if the Holmberg radius is replaced for edge-on systems with the truncation radius. (iv.) The truncation radius and the onset of the warps coincide radially with features in the rotation curve and the HI surface density. The latter is also true for less inclined systems. (v.) Inner disks are very flat and the onset of the warp just beyond the truncation radius is abrupt and discontinuous. These findings suggest that the inner flat disk and the outer warped disk are distinct components with quite different formation histories, probably involving quite different epochs. The inner disk forms initially and the warped outer disk forms as a result of much later infall of gas with a higher angular momentum in a different orientation. In an appendix the Holmberg radius is discussed. Contrary to what is often assumed Holmberg radii are not corrected for inclination.

astro-ph↗

arXiv2006

Dust in spiral disks: opacity profiles from FIR emission and counts of distant galaxies

Dust emission in the far-infrared (FIR) characterizes the temperature and quantity of interstellar dust in a spiral disk. The three Spitzer/MIPS bands are well suited to measuring the gradient in temperature and the total optical depth in the disk of a spiral galaxy. Another way to estimate the quantity of dust in a spiral disk is the "Synthetic Field Method" (SFM, Gonzalez et al. 1998), which uses the number of distant field galaxies seen through the disk of the nearby spiral. The optical depth estimated from this method can be compared to the values derived from the FIR emission. Since the two techniques depend on different assumptions regarding the dust geometry and emissivity, this comparison between the optical depth profiles can potentially shed light on the structure and quantity of the ISM in spiral disks, especially any colder components. The dust responsible for the opacity from distant galaxy counts appears to be predominantly cold (T < 20 K.). The differences between the radial absorption profiles can be explained by spiral arms in the SFM measurements. Taken over the same aperture, galaxy counts show higher extinction values than the FIR derived ones. The implications for dust geometry can hopefully be explored with a more rigorous estimate of dust mass from the FIR fluxes.

astro-ph↗

arXiv2005

The Opacity of Spiral Galaxy Disks VI: Extinction, stellar light and color

In this paper we explore the relation between dust extinction and stellar light distribution in disks of spiral galaxies. Extinction influences our dynamical and photometric perception of disks, since it can distort our measurement of the contribution of the stellar component. To characterize the total extinction by a foreground disk, Gonzalez et al. (1998) proposed the ``Synthetic Field Method'' (SFM), which uses the calibrated number of distant galaxies seen through the foreground disk as a direct indication of extinction. The method is described in Gonzalez et al. (1998) and Holwerda et al. (2005a). To obtain good statistics, the method was applied to a set of HST/WFPC2 fields Holwerda et al. (2005b) and radial extinction profiles were derived, based on these counts. In the present paper, we explore the relation of opacity with surface brightness or color from 2MASS images, as well as the relation between the scalelengths for extinction and light in the I band. We find that there is indeed a relation between the opacity (A_I) and the surface brightness, particularly at the higher surface brightnesses. No strong relation between near infrared (H-J, H-K) color and opacity is found. The scalelengths of the extinction are uncertain for individual galaxies but seem to indicate that the dust distribution is much more extended than the stellar light. The results from the distant galaxy counts are also compared to the reddening derived from the Cepheids light-curves Freedman et al. (2001). The extinction values are consistent, provided the selection effect against Cepheids with higher values of A_I is taken into account. The implications from these relations for disk photometry, M/L conversion and galaxy dynamical modeling are briefly discussed.

astro-ph↗

arXiv2005

The Opacity of Spiral Galaxy Disks: dust opacity from calibrated counts of distant galaxies

The opacity of foreground spiral disks can be probed from the number of distant galaxies seen through them. To calibrate this number for effects other than the dust extinction, Gonzalez et al (1998) developed the "Synthetic Field Method". A synthetic field is an extincted Hubble Deep Field added to the science field. The relation between the dimming and the number of retrieved synthetic galaxies calibrates the number found in the science field. Here I present results from counts in 32 HST/WFPC2 fields. The relation between opacity and radius, arm and disk, surface brightness and HI are presented. The opacity is found to be caused by a clumpy distribution of clouds in the disk. The brighter parts of the disk -the center and arms- are also the more opaque ones. The dust distribution in spiral disks is found to be more extended than the stellar disk. A comparison between HI column densities and opacity shows little relation between the two.

astro-ph↗

arXiv2005

The Opacity of Spiral Galaxy Disks V: dust opacity, HI distributions and sub-mm emission

The opacity of spiral galaxy disks, from counts of distant galaxies, is compared to HI column densities. The opacity measurements are calibrated using the ``Synthetic Field Method'' from Gonzalez et al (1998) and Holwerda et al. (2005a). When compared for individual disks, the HI column density and dust opacity do not seem to be correlated as HI and opacity follow different radial profiles. To improve statistics, an average radial opacity profile is compared to an average HI profile. Compared to dust-to-HI estimates from the literature, more extinction is found in this profile. This difference may be accounted for by an underestimate of the dust in earlier measurements due to their dependence on dust temperature. Since the SFM is insensitive to the dust temperature, the ratio between the SFM opacity and HI could very well be indicative of the true ratio. Earlier claims for a radially extended cold dust disk were based on sub-mm observations. A comparison between sub-mm observations and counts of distant galaxies is therefore desirable. We present the best current example of such a comparison, M51, for which the measurements seem to agree. However, this remains an area where improved counts of distant galaxies, sub-mm observations and our understanding of dust emissivity are needed.

astro-ph↗

arXiv2005

The Opacity of Spiral Galaxy Disks VII: the accuracy of galaxy counts as an extinction probe

The ``Synthetic Field Method'' (SFM) was introduced by Gonzalez et al. (1998) to calibrate numbers of distant galaxies as a probe of extinction in a foreground spiral disk. Gonzalez et al. (2003) studied the effect of the foreground disk on these numbers using simulations of current and future instruments for fields in the LMC, M31 and NGC 4536, a galaxy in Virgo. They concluded that: (1) the brighter centers of disks were unsuitable, (2) the granularity of the disk at a fixed surface brightness is the limiting factor in the detection of distant galaxies, and (3) the optimum distance for measurements would be that of the Virgo cluster for the current instruments on board HST. At this distance the foreground disk is smoothed with distance, improving detection of distant background galaxies. Holwerda et al. (2005a) automated the SFM and Holwerda et al. (2005b) applied it to a large set of WFPC2 fields. In this paper, the quality of the extinction measurement in these fields is compared to their distance, granularity, surface brightness and structure. The average surface brightness of the of a field is shown to directly influence the accuracy of the SFM. This restricts meaningful measurements to the disks of spiral galaxies. Large structures such as spiral arms have a similar effect. The granularity or small scale structure in a field influences the detection of distant galaxies, limiting the SFM measurements in nearby disks. From the trends in the accuracy and maximum practical field-of-view considerations, the minimum and maximum distance for SFM application, approximately 5 and 35 Mpc respectively. Using the same instrument and detection method, the relations with SFM parameters and field characteristics can be used to forgo the synthetic fields altogether.

astro-ph↗

arXiv2005

Structure and kinematics of edge-on galaxy discs -- V. The dynamics of the stellar discs

In earlier papers in this series we determined the intrinsic stellar disc kinematics of fifteen intermediate to late type edge-on spiral galaxies using a dynamical modeling technique. From the photometry we find that intrinsically more flattened discs tend to have a lower face-on central surface brightness and a larger dynamica mass-to-light ratio. This observation suggests that at a constant maximum rotational velocity lower surface brightness discs have smaller vertical stellar velocity dispersions.Although the individual uncertainties are large, we find from the dynamical modeling that at least twelve discs are submaximal. The average disc contributes 53$\pm$4 percent to the observed rotation at 2.2 disc scalelengths, with a 1$σ$ scatter of 15 percent. This percentage becomes somewhat lower when effects of finite disc flattening and gravity by the dark halo and the gas are taken into account. Since boxy and peanut-shaped bulges are probably associated with bars, the result suggests that at 2.2$h_{\rm R}$ the submaximal nature of discs is independent of barredness. The possibility remains that very high surface brightness discs are maximal.We confirm that the radial stellar disc velocity dispersion is related to the galaxy maximum rotational velocity. The scatter in this $σ-v_{\rm max}$ relation appears to correlate with the disc flattening, face-on central surface brightness and dynamical mass-to-light ratio. Low surface brightness discs tend to be more flattened and have smaller stellar velocity dispersions. The findings are consistent with the observed correlation between disc flattening and dynamical mass-to-light ratio.

astro-ph↗

arXiv2005

Structure and kinematics of edge-on galaxy discs -- IV. The kinematics of the stellar discs

The stellar disc kinematics in a sample of fifteen intermediate- to late-type edge-on spiral galaxies are studied using a dynamical modeling technique. The sample covers a substantial range in maximum rotation velocity and deprojected face-on surface brightness and contains seven spirals with either a boxy- or peanut-shaped bulge. Dynamical models of the stellar discs are constructed using the disc structure from $I$-band surface photometry and rotation curves observed in the gas. The differences in the line-of-sight stellar kinematics between the models and absorption line spectroscopy are minimized using a least-squares approach. The modeling constrains the disc surface density and stellar radial velocity dispersion at a fiducial radius through the free parameter $\sqrt{M/L}$ $(σ_{\rm z}/σ_{\rm R})^{-1}$, where $σ_{\rm z}/σ_{\rm R}$ is the ratio of vertical and radial velocity dispersion and $M/L$ the disc mass-to-light ratio. For thirteen spirals a transparent model provides a good match to the mean line-of-sight stellar velocity dispersion. Models that include a realistic radiative transfer prescription confirm that the effect of dust on the observable stellar kinematics is small at the observed slit positions. We discuss possible sources of systematic error and conclude that most of these are likely to be small. The exception is the neglect of the dark halo gravity, which has probably caused an overestimate of the surface density in the case of low surface brightness discs.

astro-ph↗

arXiv2004

The Opacity of Spiral Galaxy Disks III: Automating the "Synthetic Field Method"

The dust extinction in spiral disks can be estimated from the counts of background field galaxies, provided the deleterious effects of confusion introduced by structure in the image of the foreground spiral disk can be calibrated. Gonzalez et al. (1998) developed a method for this calibration, the ``Synthetic Field Method'' (SFM), and applied this concept to a HST/WFPC2 image of NGC4536. The SFM estimates the total extinction through the disk without the necessity of assumptions about the distribution of absorbers or the disk light. The poor statistics, however, result in a large error in individual measurements. We report on improvements to and automation of the Synthetic Field Method which render it suitable for application to large archival datasets. To illustrate the strengths and weaknesses of this new method, the results on NGC 1365, a SBb, and NGC 4536, a SABbc, are presented. The extinction estimate for NGC1365 is A_I = 0.6 (+0.6/-0.7) at 0.45 R_25 and for NGC4536 it is A_I = 1.6 (+1.0/-1.3) at 0.75 R_25. The results for NGC4536 are compared with those of Gonzalez et al. (1998). The automation is found to limit the maximum depth to which field galaxies can be found. Taking this into account, our results agree with those of Gonzalez et al. (1998). We conclude that this method can only give an inaccurate measure of extinction for a field covering a small solid angle. An improved measurement of disk extinction can be done by averaging the results over a series of HST fields, thereby improving the statistics. This can be achieved with the automated method, trading some completeness limit for speed. The results from this set of fields are reported in a companion paper Holwerda et al. (2005b).

astro-ph↗