arXiv subjects

P. Conconi

Publications and source records attributed to P. Conconi.

At least 19 recordsLinked to original sources

arXiv2026

Structural, thermal and optical tolerance analysis of SHARP, a near infrared spectrograph for next generation telescope

The design and verification of cryogenic near-infrared spectrographs require rigorous multidisciplinary analyses to ensure optical performance under realistic operational conditions. In this work, we present a structural-thermal-optical performance (STOP) analysis of the SHARP instrument, a multi-mode spectrograph designed for use with upcoming multi-conjugate adaptive optics (MCAO) systems on Extremely Large Telescopes (ELTs). Transient and steady-state thermal simulations were performed using Ansys to model the cooldown process and temperature distribution within the opto-mechanical structure. The resulting temperature fields were mapped to structural models through linear interpolation, enabling the evaluation of thermal stresses and deformations of optical elements. Optical sensitivity and tolerance analyses were carried out using Ansys Zemax OpticStudio, with Monte Carlo simulations applied to assess robustness against decenter, tilt, and despace errors. Results indicate that SHARP maintains RMS spot radius values within acceptance threshold, and that the inclusion of compensators significantly enhances compliance with the Ensquared Energy (EE) requirement across all channels. The analysis confirms that SHARP can achieves its optical performance goals while remaining within mechanical and thermal constraints, providing a validated framework for the development of next-generation cryogenic astronomical instrumentation.

astro-ph.IM↗

arXiv2026

SHARP -- A spectrograph proposal to fully exploit ELT capabilities and look beyond JWST

The Extremely Large Telescopes (ELTs), with their large apertures and cutting-edge Multi-Conjugate Adaptive Optics (MCAO) systems, promise to deliver data that is both sharper and deeper than even the James Webb Space Telescope (JWST) across large fields. SHARP is a concept study for a near-IR (0.95-2.45 $\mu$m) spectrograph specifically designed to fully exploit the collecting area and angular resolution capabilities of the upcoming ESO's ELT. The instrument concept is driven by the goal of tackling the most important questions in astrophysics and cosmology, from exploring primordial galaxies to studying the formation of young stellar object and planetary systems in the nearby dust-enshrouded regions, bridging the gap between the local and the distant Universe. This requires versatility to accommodate diverse observational needs. SHARP is composed of two main units: NEXUS, a Multi-Object Spectrograph (MOS) optimized for detecting the faintest sources, and VESPER, a multi-object Integral Field Unit (multi-IFU) designed for brighter ones. This article provides an overview of the scientific design drivers, the solutions developed to meet them, and the resulting optical design that achieves the required performance.

astro-ph.IM↗

arXiv2025

SHARP: Beyond JWST -- Revealing the galaxy birth and growth with the resolution of the ELT

A deep understanding of the life-cycle of galaxies, particularly those of high mass, requires clarifying the mechanisms that regulate star formation (SF) and its abrupt shutdown (quenching), often capable of stopping SF rates of hundreds of solar masses per year. What initially triggers quenching, and what sustains the quiescent state thereafter, especially given the frequent presence of large gas reservoirs or even massive gas inflows, are unsolved key issues. Ultimately, the crucial connection between the galaxy life-cycle and the surrounding Intergalactic (IGM) and Circumgalactic (CGM) Medium remains largely unclear. Addressing these issues requires studying star formation, chemical enrichment, and quenching homogeneously up to high redshift. The upcoming AO-assisted Extremely Large Telescope (ELT), will deliver sharper and deeper data than the JWST. SHARP is a concept study for a near-IR (0.95-2.45 mu) spectrograph designed to fully exploit the capabilities of ELT. Designed for multi-object slit spectroscopy and multi-Integral Field spectroscopy, SHARP points to achieve angular resolutions (~30 mas) far superior to NIRSpec at JWST(100 mas) to decipher and reconstruct the life-cycle oa galaxies.

astro-ph.IM↗

arXiv2025

Conceptual Opto-Mechanical design of SHARP: a near-infrared multi-mode spectrograph conceived for the next-generation telescopes

The next generation of Extremely Large Telescopes (ELTs), with their wide apertures and advanced Multi-Conjugate Adaptive Optics (MCAO) systems, will provide unprecedented sharp and deep observations, even surpassing the capabilities of James Webb Space Telescope (JWST). SHARP, a near-infrared (0.95-2.45 {\mu}m) spectrograph, is designed to optimally exploit the collecting area and angular resolution of these forthcoming ELTs, and specifically optimized for the MCAO unit MORFEO at the ELT. SHARP includes two main units: NEXUS, a Multi-Object Spectrograph (MOS), and VESPER, a multi-Integral Field Unit. This paper outlines the opto-mechanical design of SHARP based on the scientific requirements of the project. The optical design is engineered to meet project specifications, featuring a compact mechanical structure that minimizes the required cryogenic power while ensuring ease of access for maintenance and straightforward assembly procedures.

astro-ph.IM↗

arXiv2024

SHARP -- A near-IR multi-mode spectrograph conceived for MORFEO@ELT

The Extremely Large Telescopes (ELTs), thanks to their large apertures and cutting-edge Multi-Conjugate Adaptive Optics (MCAO) systems, promise to deliver sharper and deeper data even than the JWST. SHARP is a concept study for a near-IR (0.95-2.45 $\mu$m) spectrograph conceived to fully exploit the collecting area and the angular resolution of the upcoming generation of ELTs. In particular, SHARP is designed for the 2nd port of MORFEO@ELT. Composed of a Multi-Object Spectrograph, NEXUS, and a multi-Integral Field Unit, VESPER, MORFEO-SHARP will deliver high angular ($\sim$30 mas) and spectral (R$\simeq$300, 2000, 6000, 17000) resolution, outperforming NIRSpec@JWST (100 mas). SHARP will enable studies of the nearby Universe and the early Universe in unprecedented detail. NEXUS is fed by a configurable slit system deploying up to 30 slits with $\sim$2.4 arcsec length and adjustable width, over a field of about 1.2"$\times$1.2" (35 mas/pix). Each slit is fed by an inversion prism able to rotate by an arbitrary angle the field that can be seen by the slit. VESPER is composed of 12 probes of 1.7"$\times$1.5" each (spaxel 31 mas) probing a field 24"$\times$70". SHARP is conceived to exploit the ELTs apertures reaching the faintest flux and the sharpest angular resolution by joining the sensitivity of NEXUS and the high spatial sampling of VESPER to MORFEO capabilities. This article provides an overview of the scientific design drivers, their solutions, and the resulting optical design of the instrument achieving the required optical performance.

astro-ph.IM↗

arXiv2023

The commissioning phase

In May 1997 a consistent part of the services and structures committed to the industry had already been released to the commissioning group. The telescope itself was, with the exception of the Nasmyth derotators, motors and all the optics groups, basically ready in its mechanical parts to accept the integration of all services and control equipment. Also the verification of the cabling (interlocks, data-nets, power and controls) already mounted was started in the same period. Starting from June 1998 (telescope first-light date) the telescope went gradually in use, several nights per week, in order to test and tune the tracking and pointing system, the optics and the first derotator system (Nasmyth A station). At the end of the commissioning period and with the first scientific instruments mounted (April 1999) also the first routinely observations started. In this moment the telescope is doing astronomy 80% of time and the complete first-light instrumentation is mounted.

astro-ph.IM↗

arXiv2022

First light of BEaTriX, the new testing facility for the modular X-ray optics of the ATHENA mission

The Beam Expander Testing X-ray facility (BEaTriX) is a unique X-ray apparatus now operated at the Istituto Nazionale di Astrofisica (INAF), Osservatorio Astronomico di Brera (OAB), in Merate, Italy. It has been specifically designed to measure the point spread function (PSF) and the effective area (EA) of the X-ray mirror modules (MMs) of the Advanced Telescope for High-ENergy Astrophysics (ATHENA), based on silicon pore optics (SPO) technology, for verification before integration into the mirror assembly. To this end, BEaTriX generates a broad, uniform, monochromatic, and collimated X-ray beam at 4.51 keV. [...] In BEaTriX, a micro-focus X-ray source with a titanium anode is placed in the focus of a paraboloidal mirror, which generates a parallel beam. A crystal monochromator selects the 4.51 keV line, which is expanded to the final size by a crystal asymmetrically cut with respect to the crystalline planes. [...] After characterization, the BEaTriX beam has the nominal dimensions of 170 mm x 60 mm, with a vertical divergence of 1.65 arcsec and a horizontal divergence varying between 2.7 and 3.45 arcsec, depending on the monochromator setting: either high collimation or high intensity. The flux per area unit varies from 10 to 50 photons/s/cm2 from one configuration to the other. The BEaTriX beam performance was tested using an SPO MM, whose entrance pupil was fully illuminated by the expanded beam, and its focus was directly imaged onto the camera. The first light test returned a PSF and an EA in full agreement with expectations. As of today, the 4.51 keV beamline of BEaTriX is operational and can characterize modular X-ray optics, measuring their PSF and EA with a typical exposure of 30 minutes. [...] We expect BEaTriX to be a crucial facility for the functional test of modular X-ray optics, such as the SPO MMs for ATHENA.

astro-ph.IM↗

arXiv2020

ESPRESSO high resolution transmission spectroscopy of WASP-76b

Aims. We report on ESPRESSO high-resolution transmission spectroscopic observations of two primary transits of the highly-irradiated, ultra-hot Jupiter-size planet WASP-76b. We investigate the presence of several key atomic and molecular features of interest that may reveal the atmospheric properties of the planet. Methods. We extracted two transmission spectra of WASP-76b with R approx 140,000 using a procedure that allowed us to process the full ESPRESSO wavelength range (3800-7880 A) simultaneously. We observed that at a high signal-to-noise ratio, the continuum of ESPRESSO spectra shows wiggles that are likely caused by an interference pattern outside the spectrograph. To search for the planetary features, we visually analysed the extracted transmission spectra and cross-correlated the observations against theoretical spectra of different atomic and molecular species. Results. The following atomic features are detected: Li I, Na I, Mg I, Ca II, Mn I, K I, and Fe I. All are detected with a confidence level between 9.2 sigma (Na I) and 2.8 sigma (Mg I). We did not detect the following species: Ti I, Cr I, Ni I, TiO, VO, and ZrO. We impose the following 1 sigma upper limits on their detectability: 60, 77, 122, 6, 8, and 8 ppm, respectively. Conclusions. We report the detection of Li I on WASP-76b for the first time. In addition, we found the presence of Na I and Fe I as previously reported in the literature. We show that the procedure employed in this work can detect features down to the level of ~ 0.1 % in the transmission spectrum and ~ 10 ppm by means of a cross-correlation method. We discuss the presence of neutral and singly ionised features in the atmosphere of WASP-76b.

astro-ph.EP↗

arXiv2020

ESPRESSO@VLT -- On-sky performance and first results

ESPRESSO is the new high-resolution spectrograph of ESO's Very-Large Telescope (VLT). It was designed for ultra-high radial-velocity precision and extreme spectral fidelity with the aim of performing exoplanet research and fundamental astrophysical experiments with unprecedented precision and accuracy. It is able to observe with any of the four Unit Telescopes (UT) of the VLT at a spectral resolving power of 140,000 or 190,000 over the 378.2 to 788.7 nm wavelength range, or with all UTs together, turning the VLT into a 16-m diameter equivalent telescope in terms of collecting area, while still providing a resolving power of 70,000. We provide a general description of the ESPRESSO instrument, report on the actual on-sky performance, and present our Guaranteed-Time Observation (GTO) program with its first results. ESPRESSO was installed on the Paranal Observatory in fall 2017. Commissioning (on-sky testing) was conducted between December 2017 and September 2018. The instrument saw its official start of operations on October 1st, 2018, but improvements to the instrument and re-commissioning runs were conducted until July 2019. The measured overall optical throughput of ESPRESSO at 550 nm and a seeing of 0.65 arcsec exceeds the 10% mark under nominal astro-climatic conditions. We demonstrate a radial-velocity precision of better than 25 cm/s during one night and 50 cm/s over several months. These values being limited by photon noise and stellar jitter show that the performanceis compatible with an instrumental precision of 10 cm/s. No difference has been measured across the UTs neither in throughput nor RV precision. The combination of the large collecting telescope area with the efficiency and the exquisite spectral fidelity of ESPRESSO opens a new parameter space in RV measurements, the study of planetary atmospheres, fundamental constants, stellar characterisation and many other fields.

astro-ph.IM↗

arXiv2020

A precise architecture characterization of the $\pi$ Men planetary system

The bright star $\pi$ Men was chosen as the first target for a radial velocity follow-up to test the performance of ESPRESSO, the new high-resolution spectrograph at the ESO's Very-Large Telescope (VLT). The star hosts a multi-planet system (a transiting 4 M$_\oplus$ planet at $\sim$0.07 au, and a sub-stellar companion on a $\sim$2100-day eccentric orbit) which is particularly appealing for a precise multi-technique characterization. With the new ESPRESSO observations, that cover a time span of 200 days, we aim to improve the precision and accuracy of the planet parameters and search for additional low-mass companions. We also take advantage of new photometric transits of $\pi$ Men c observed by TESS over a time span that overlaps with that of the ESPRESSO follow-up campaign. We analyse the enlarged spectroscopic and photometric datasets and compare the results to those in the literature. We further characterize the system by means of absolute astrometry with Hipparcos and Gaia. We used the spectra of ESPRESSO for an independent determination of the stellar fundamental parameters. We present a precise characterization of the planetary system around $\pi$ Men. The ESPRESSO radial velocities alone (with typical uncertainty of 10 cm/s) allow for a precise retrieval of the Doppler signal induced by $\pi$ Men c. The residuals show an RMS of 1.2 m/s, and we can exclude companions with a minimum mass less than $\sim$2 M$_\oplus$ within the orbit of $\pi$ Men c). We improve the ephemeris of $\pi$ Men c using 18 additional TESS transits, and in combination with the astrometric measurements, we determine the inclination of the orbital plane of $\pi$ Men b with high precision ($i_{b}=45.8^{+1.4}_{-1.1}$ deg). This leads to the precise measurement of its absolute mass $m_{b}=14.1^{+0.5}_{-0.4}$ M$_{Jup}$, and shows that the planetary orbital planes are highly misaligned.

astro-ph.EP↗

arXiv2020

Characterization of the K2-38 planetary system. Unraveling one of the densest planets known to date

We characterized the transiting planetary system orbiting the G2V star K2-38 using the new-generation echelle spectrograph ESPRESSO. We carried out a photometric analysis of the available K2 photometric light curve of this star to measure the radius of its two known planets. Using 43 ESPRESSO high-precision radial velocity measurements taken over the course of 8 months along with the 14 previously published HIRES RV measurements, we modeled the orbits of the two planets through a MCMC analysis, significantly improving their mass measurements. Using ESPRESSO spectra, we derived the stellar parameters, $T_{\rm eff}$=5731$\pm$66, $\log g$=4.38$\pm$0.11~dex, and $[Fe/H]$=0.26$\pm$0.05~dex, and thus the mass and radius of K2-38, $M_{\star}$=1.03 $^{+0.04}_{-0.02}$~M$_{\oplus}$ and $R_{\star}$=1.06 $^{+0.09}_{-0.06}$~R$_{\oplus}$. We determine new values for the planetary properties of both planets. We characterize K2-38b as a super-Earth with $R_{\rm P}$=1.54$\pm$0.14~R$_{\rm \oplus}$ and $M_{\rm p}$=7.3$^{+1.1}_{-1.0}$~M$_{\oplus}$, and K2-38c as a sub-Neptune with $R_{\rm P}$=2.29$\pm$0.26~R$_{\rm \oplus}$ and $M_{\rm p}$=8.3$^{+1.3}_{-1.3}$~M$_{\oplus}$. We derived a mean density of $\rho_{\rm p}$=11.0$^{+4.1}_{-2.8}$~g cm$^{-3}$ for K2-38b and $\rho_{\rm p}$=3.8$^{+1.8}_{-1.1}$~g~cm$^{-3}$ for K2-38c, confirming K2-38b as one of the densest planets known to date. The best description for the composition of K2-38b comes from an iron-rich Mercury-like model, while K2-38c is better described by a rocky model with a H2 envelope. The maximum collision stripping boundary shows how giant impacts could be the cause for the high density of K2-38b. The irradiation received by each planet places them on opposite sides of the radius valley. We find evidence of a long-period signal in the radial velocity time-series whose origin could be linked to a 0.25-3~M$_{\rm J}$ planet or stellar activity.

astro-ph.EP↗

arXiv2020

Revisiting Proxima with ESPRESSO

We aim to confirm the presence of Proxima b using independent measurements obtained with the new ESPRESSO spectrograph, and refine the planetary parameters taking advantage of its improved precision. We analysed 63 spectroscopic ESPRESSO observations of Proxima taken during 2019. We obtained radial velocity measurements with a typical radial velocity photon noise of 26 cm/s. We ran a joint MCMC analysis on the time series of the radial velocity and full-width half maximum of the cross-correlation function to model the planetary and stellar signals present in the data, applying Gaussian process regression to deal with stellar activity. We confirm the presence of Proxima b independently in the ESPRESSO data. The ESPRESSO data on its own shows Proxima b at a period of 11.218 $\pm$ 0.029 days, with a minimum mass of 1.29 $\pm$ 0.13 Me. In the combined dataset we measure a period of 11.18427 $\pm$ 0.00070 days with a minimum mass of 1.173 $\pm$ 0.086 Me. We find no evidence of stellar activity as a potential cause for the 11.2 days signal. We find some evidence for the presence of a second short-period signal, at 5.15 days with a semi-amplitude of merely 40 cm/s. If caused by a planetary companion, it would correspond to a minimum mass of 0.29 $\pm$ 0.08 Me. We find that the FWHM of the CCF can be used as a proxy for the brightness changes and that its gradient with time can be used to successfully detrend the radial velocity data from part of the influence of stellar activity. The activity-induced radial velocity signal in the ESPRESSO data shows a trend in amplitude towards redder wavelengths. Velocities measured using the red end of the spectrograph are less affected by activity, suggesting that the stellar activity is spot-dominated. The data collected excludes the presence of extra companions with masses above 0.6 Me at periods shorter than 50 days.

astro-ph.EP↗

arXiv2019

First detection of the Crab Nebula at TeV energies with a Cherenkov telescope in a dual-mirror Schwarzschild-Couder configuration: the ASTRI-Horn telescope

We report on the first detection of very high-energy (VHE) gamma-ray emission from the Crab Nebula by a Cherenkov telescope in dual-mirror Schwarzschild-Couder (SC) configuration. The result has been achieved by means of the 4 m size ASTRI-Horn telescope, operated on Mt. Etna (Italy) and developed in the context of the Cherenkov Telescope Array Observatory preparatory phase. The dual-mirror SC design is aplanatic and characterized by a small plate scale, allowing us to implement large field of view cameras with small-size pixel sensors and a high compactness. The curved focal plane of the ASTRI camera is covered by silicon photo-multipliers (SiPMs), managed by an unconventional front-end electronics based on a customized peak-sensing detector mode. The system includes internal and external calibration systems, hardware and software for control and acquisition, and the complete data archiving and processing chain. The observations of the Crab Nebula were carried out in December 2018, during the telescope verification phase, for a total observation time (after data selection) of 24.4 h, equally divided into on- and off-axis source exposure. The camera system was still under commissioning and its functionality was not yet completely exploited. Furthermore, due to recent eruptions of the Etna Volcano, the mirror reflection efficiency was reduced. Nevertheless, the observations led to the detection of the source with a statistical significance of 5.4 sigma above an energy threshold of ~3 TeV. This result provides an important step towards the use of dual-mirror systems in Cherenkov gamma-ray astronomy. A pathfinder mini-array based on nine large field-of-view ASTRI-like telescopes is under implementation.

astro-ph.IM↗

arXiv2017

First optical validation of a Schwarzschild Couder telescope: the ASTRI SST-2M Cherenkov telescope

The Cherenkov Telescope Array (CTA) represents the most advanced facility designed for Cherenkov Astronomy. ASTRI SST-2M has been developed as a demonstrator for the Small Size Telescope in the context of the upcoming CTA. Its main innovation consists in the optical layout which implements the Schwarzschild-Couder configuration and is fully validated for the first time. The ASTRI SST-2M optical system represents the first qualified example for two mirrors telescope for Cherenkov Astronomy. This configuration permits to (i) maintain a high optical quality across a large FoV (ii) de-magnify the plate scale, (iii) exploit new technological solutions for focal plane sensors. The goal of the paper is to present the optical qualification of the ASTRI SST-2M telescope. The qualification has been obtained measuring the PSF sizes generated in the focal plane at various distance from the optical axis. These values have been compared with the performances expected by design. After an introduction on the Gamma Astronomy from the ground, the optical design and how it has been implemented for ASTRI SST-2M is discussed. Moreover the description of the setup used to qualify the telescope over the full field of view is shown. We report the results of the first--light optical qualification. The required specification of a flat PSF of $\sim 10$ arcmin in a large field of view ~10 deg has been demonstrated. These results validate the design specifications, opening a new scenario for Cherenkov Gamma ray Astronomy and, in particular, for the detection of high energy (5 - 300 TeV) gamma rays and wide-field observations with CTA.

astro-ph.IM↗

arXiv2014

ESPRESSO: The next European exoplanet hunter

The acronym ESPRESSO stems for Echelle SPectrograph for Rocky Exoplanets and Stable Spectroscopic Observations; this instrument will be the next VLT high resolution spectrograph. The spectrograph will be installed at the Combined-Coudé Laboratory of the VLT and linked to the four 8.2 m Unit Telescopes (UT) through four optical Coudé trains. ESPRESSO will combine efficiency and extreme spectroscopic precision. ESPRESSO is foreseen to achieve a gain of two magnitudes with respect to its predecessor HARPS, and to improve the instrumental radial-velocity precision to reach the 10 cm/s level. It can be operated either with a single UT or with up to four UTs, enabling an additional gain in the latter mode. The incoherent combination of four telescopes and the extreme precision requirements called for many innovative design solutions while ensuring the technical heritage of the successful HARPS experience. ESPRESSO will allow to explore new frontiers in most domains of astrophysics that require precision and sensitivity. The main scientific drivers are the search and characterization of rocky exoplanets in the habitable zone of quiet, nearby G to M-dwarfs and the analysis of the variability of fundamental physical constants. The project passed the final design review in May 2013 and entered the manufacturing phase. ESPRESSO will be installed at the Paranal Observatory in 2016 and its operation is planned to start by the end of the same year.

astro-ph.IM↗

arXiv2013

PAOLO: a Polarimeter Add-On for the LRS Optics at a Nasmyth focus of the TNG

We describe a new polarimetric facility available at the Istituto Nazionale di AstroFisica / Telescopio Nazionale Galileo at La Palma, Canary islands. This facility, PAOLO (Polarimetric Add-On for the LRS Optics), is located at a Nasmyth focus of an alt-az telescope and requires a specific modeling in order to remove the time- and pointing position-dependent instrumental polarization. We also describe the opto-mechanical structure of the instrument and its calibration and present early examples of applications.

astro-ph.IM↗

arXiv2013

The ASTRI Mini-Array Science Case

ASTRI is a Flagship Project financed by the Italian Ministry of Education, University and Research, and led by INAF, the Italian National Institute of Astrophysics. Within this framework, INAF is currently developing an end-to-end prototype of a Small Size Telescope in a dual-mirror configuration (SST-2M) for the Cherenkov Telescope Array (CTA), scheduled to start data acquisition in 2014. Although the ASTRI SST-2M prototype is mainly a technological demonstrator, it will perform scientific observations of the Crab Nebula, Mrk 421 and Mrk 501 at E>1 TeV. A remarkable improvement in terms of performance could come from the operation, in 2016, of a SST-2M mini-array, composed of a few SST-2M telescopes to be placed at final CTA Southern Site. The SST mini-array will be able to study in great detail relatively bright sources (a few x 10E-12 erg/cm2/s at 10 TeV) with angular resolution of a few arcmin and energy resolution of about 10-15%. Thanks to the stereo approach, it will be possible to verify the wide field of view (FoV) performance through the detections of very high-energy showers with core located at a distance up to 500 m, to compare the mini-array performance with the Monte Carlo expectations by means of deep observations of selected targets, and to perform the first CTA science at the beginning of the mini-array operations. Prominent sources such as extreme blazars, nearby well-known BL Lac objects and radio-galaxies, galactic pulsar wind nebulae, supernovae remnants, micro-quasars, and the Galactic Center can be observed in a previously unexplored energy range, in order to investigate the electron acceleration and cooling, relativistic and non relativistic shocks, the search for cosmic-ray (CR) Pevatrons, the study of the CR propagation, and the impact of the extragalactic background light on the spectra of the sources.

astro-ph.HE↗

arXiv2013

The dual-mirror Small Size Telescope for the Cherenkov Telescope Array

In this paper, the development of the dual mirror Small Size Telescopes (SST) for the Cherenkov Telescope Array (CTA) is reviewed. Up to 70 SST, with a primary mirror diameter of 4 m, will be produced and installed at the CTA southern site. These will allow investigation of the gamma-ray sky at the highest energies accessible to CTA, in the range from about 1 TeV to 300 TeV. The telescope presented in this contribution is characterized by two major innovations: the use of a dual mirror Schwarzschild-Couder configuration and of an innovative camera using as sensors either multi-anode photomultipliers (MAPM) or silicon photomultipliers (SiPM). The reduced plate-scale of the telescope, achieved with the dual-mirror optics, allows the camera to be compact (40 cm in diameter), and low-cost. The camera, which has about 2000 pixels of size 6x6 mm^2, covers a field of view of 10{\deg}. The dual mirror telescopes and their cameras are being developed by three consortia, ASTRI (Astrofisica con Specchi a Tecnologia Replicante Italiana, Italy/INAF), GATE (Gamma-ray Telescope Elements, France/Paris Observ.) and CHEC (Compact High Energy Camera, universities in UK, US and Japan) which are merging their efforts in order to finalize an end-to-end design that will be constructed for CTA. A number of prototype structures and cameras are being developed in order to investigate various alternative designs. In this contribution, these designs are presented, along with the technological solutions under study.

astro-ph.IM↗