arXiv subjects

P. Cruzalèbes

Publications and source records attributed to P. Cruzalèbes.

At least 19 recordsLinked to original sources

arXiv2026

VLTI/MATISSE observations of the hot dust around $β$ Pictoris: Observing faint objects with MATISSE

Context: Hot exozodiacal dust has been detected around approximately 20% of nearby main-sequence stars, indicating that it is a common feature of extrasolar planetary systems. However, its spatial distribution and grain properties remain poorly understood. Aims: We aim to show that the spatial distribution of hot dust around beta Pictoris, an iconic planetary system with two known planets and a population of exocomets, can be constrained through a detailed analysis of optical long-baseline interferometry data. Methods: We obtained L-band observations at approximately 3.5 microns of beta Pictoris with MATISSE at the VLTI. We developed a method to assess correlations in the visibility measurements by estimating the full data covariance matrix, and modeled the circumstellar emission with geometric brightness distributions. Results: We detect circumstellar emission around beta Pictoris consistent with hot exozodiacal dust. Modeling the emission with and without accounting for data correlations demonstrates their significant impact on the inferred dust properties. The best-fit model reveals a compact (approximately 0.05 au), highly inclined dust structure near the sublimation radius, misaligned by approximately 60 degrees on the sky with respect to the extended edge-on outer disk. It contributes approximately 4%-7.5% of the total flux at 3.4 microns and is composed of submicron-sized grains. The data are also compatible with an additional dust component near 1 au. Conclusions: For beta Pictoris, the two-decade-old paradigm placing hot exozodiacal dust near the sublimation radius and consisting of submicron-sized grains finds observational support in the detailed analysis of MATISSE data. The misalignment with the known debris disk further supports a link to exocometary activity.

astro-ph.EP↗

arXiv2026

The complex inner disk of the Herbig Ae star HD 100453 with VLTI/MATISSE

The inner regions of planet-forming disks hold invaluable insights for our understanding of planet formation. The disk around the Herbig star HD 100453 presents one such environment, with an inner disk that is significantly misaligned with respect to the outer disk. This paper expands the existing H-band (PIONIER) and K-band (GRAVITY) interferometric studies of the HD 100453 inner disk to the L-band with the MATISSE VLTI instrument. With snapshot data spanning approximately four years we aim for a more comprehensive understanding of the inner disk structures and their potential time evolution. Based on the MATISSE data obtained, we use a combination of analytical models and image reconstruction to constrain the disk structure. Additionally, we fit a temperature gradient model to the selected wavelength range of PIONIER, GRAVITY and MATISSE to derive physical properties of the inner regions. Our parametric model finds an inclination of $\sim 47.5^\circ$ and a position angle of $\sim 83.6^\circ$, which corroborates the case of strong inner-outer disk misalignment. From the symmetric temperature gradient we derive an inner disk radius around $\sim0.27$ au, with dust surface densities of $Σ_{\rm{subl}} \approx 10^{-3.2}$ g/cm$^2$ and vertical optical depth $τ_{\rm{z, subl}} \approx 0.1-0.06$. Same-night MATISSE and GRAVITY observations indicate the necessity for higher-order asymmetries to explain the interferometric signals, which is further supported by a MATISSE snapshot image reconstruction. The chromatic interferometric data reveal the likely need for higher-order asymmetries to explain the inner disk of HD~100453, suggesting a possible origin in dynamic interactions or disk instabilities. Coordinated multi-wavelength infrared interferometric observations with GRAVITY and MATISSE will be crucial to confirm these findings and uncover its underlying nature.

astro-ph.SR↗

arXiv2026

The asymmetric structure of the inner disc around HD 142527 A with VLTI/MATISSE

Circumstellar discs, and especially their inner regions, covering ranges from <1 au to a few astronomical units, are the birthplaces of terrestrial planets. The inner regions are thought to be similarly diverse in structure as the well-observed outer regions probed by ALMA. Combining data and results from previous studies of the VLTI/PIONIER and VLTI/GRAVITY instruments with new, multi-epoch VLTI/MATISSE observations, we aim to provide a comprehensive picture of the structure of the inner regions of the circumstellar disc around the F-type Herbig Ae/Be star HD 142527 A, the primary of a binary star system. We model the multi-wavelength interferometric data using a parametrised, geometrically thin disc model, allowing for azimuthal asymmetry, exploring a first-order disc modulation and an off-centre Gaussian component. We find time-variable structures in the N-band observables, which we reproduce with time-dependent models. This variability manifests as azimuthally asymmetric emission, evidenced by strong, non-zero closure phases in the N-band data. Fits to individual epochs of the N-band observations yield better $χ^2_\text{r}$ values than fits to all epochs simultaneously. This suggests substantial changes in the geometry of the inner disc emission from ~1 au up to a few astronomical-unit scales from one year to the next. Moreover, our models produce a very close-in inner disc rim $R_\text{rim}\approx0.1$ au. All together, we find a very complex, substantially non-point symmetric and temporally-variable disc ($r_\text{out}\lesssim6$ au) around the primary. The very close-in inner rim indicates the presence of material inside the typical wall-like sublimation radius $R_\text{rim,literature}\approx0.3$ au. The complex, temporally variable inner-disc geometry is likely affected or even caused by the close passing (~5 au) and short orbit ($P\approx24$ yr) of the companion HD 142527 B.

astro-ph.EP↗

arXiv2026

The MATISSE view of the inner region of the RY Tau protoplanetary disk

The T-Tauri type young stellar object RY Tau exhibits a dust depleted inner cavity characteristic of a transition disk. We constrain the spatial distribution and mineralogy of dust in the RY Tau protoplanetary disk in the inner few astronomical units using spectrally resolved interferometric observations in the L, M, and N bands obtained with VLTI/MATISSE. Employing a 2D temperature gradient model we estimate the orientation of the inner disk finding no evidence of significant misalignment between the inner and outer disk of RY Tau. Successively, we analyze the chemical composition of silicates depending on spatial region in the disk and identify several silicate species commonly found in protoplanetary disks. Additionally, a depletion of amorphous dust grains toward the central protostar is observed. Monte Carlo radiative transfer simulations show that hot dust close to the protostar and in the line of sight to the observer, either in the uppermost disk layers of a strongly flared disk or in a dusty envelope, is necessary to model the observations. The shadow cast by a dense innermost disk midplane on the dust further out explains the observed closure phases in the L band and to some extent in the M band. However, the closure phases in the N band are underestimated by our model, hinting at an additional asymmetry in the flux density distribution not visible at shorter wavelengths.

astro-ph.EP↗

arXiv2025

X TrA through the eyes of MATISSE: More evidence of clumpy molecular layers around C-type asymptotic giant branch stars

Aims. The goal of this study is to further the understanding of the wind formation mechanism in asymptotic giant branch (AGB) stars through the analysis of the close environment (within a few stellar radii) of the carbon star X TrA. Methods. X TrA was observed for the first time with the Mid-Infrared SpectroScopic Experiment instrument (MATISSE) in the L and N bands in low spectral resolution mode (R=30), and its close surroundings were mapped in specific wavelength ranges corresponding to specific molecules ($C_2H_2$ and HCN, at 3.1 and 3.8 $μ$m) and dust (amorphous carbon and, for example, Sic at 11.3 $μ$m), via image reconstruction techniques. Results. The angular diameter of the star ranges from 10 mas in the L band pseudo-continuum (3.5 $μ$m) to 20 mas at 3.1 and 11.3 $μ$m. The reconstructed images show some mild elongated features (along the east-west direction) and asymmetric protrusions, which are most evident around 3.1 $μ$m. Imaging results highlight the clumpy nature of the circumstellar environment, starting from the photospheric region up to more distant layers. Conclusions. The angular diameters found for X TrA in the image data are in agreement with previous photospheric diameter estimates (following VLTI/MIDI 8-13 $μ$m observations), and their wavelength dependence is similar to values found for other carbon stars observed with MATISSE (R Scl and V Hya). The 3.1 $μ$m images presented here show highly asymmetric features, another case of a C-rich star with irregular morphologies close to the stellar disk; this supports the notion that the $C_2H_2+HCN$ abundance distribution usually originates from a clumpy layer around carbon stars.

astro-ph.SR↗

arXiv2025

Multi-band infrared imaging reveals dusty spiral arcs around the binary B[e] star 3 Puppis

3 Puppis is the brightest known B[e] star. Recent work classifies this A-type object as a supergiant, yet the impact of its binarity on the circumstellar environment (CE) remains hard to characterize. To resolve its dusty region at 5-10 mas, we obtained mid-IR interferometric observations with VLTI/MATISSE over 3-12 μm. Because the (u,v) coverage supports imaging, we introduce a statistical interferometric-imaging workflow based on MiRA to generate averaged images: this systematic approach enables the selection of an optimal set of reconstructions, improving the robustness and fidelity of the recovered features. We also use SPARCO, an independent tool well suited to bright central objects embedded in fainter extended emission. Images from both tools in the L, M, and N bands agree and reveal an asymmetric, elongated feature ~17 mas (~10 au at 631 pc) southeast of the star with ~20% density contrast. A second northwest asymmetry and a skewed inner rim are detected. Simple geometric modelling, guided by the MATISSE images, constrains the morphology, location, and flux of the CE and its asymmetries. The images are consistent with earlier VLTI measurements but expose a more complex CE with large-scale clumps in the southeast and northwest parts of the disc. Hydrodynamic modelling indicates that tidal spiral-wake perturbations from the central binary, dynamically excited at Lindblad resonances in the circumbinary disc, best explain the radial extent and curvature of the elongated structures seen in all bands.

astro-ph.SR↗

arXiv2024

An impressionist view of V Hydrae. When MATISSE paints Asymmetric Giant Blobs

Our purpose is to study the effect of binary companions located within the first 10 stellar radii from the primary AGB star. In this work, we target the mass-losing carbon star V Hydrae (V Hya), looking for signatures of its companion in the dust forming region of the atmosphere. The star was observed in the L- and N-bands with the VLTI/MATISSE instrument at low spectral resolution. We reconstructed images of V Hya's photosphere and surroundings using the two bands and compared our interferometric observables with VLTI/MIDI and VISIR archival data. To constrain the dust properties, we used DUSTY to model the spectral energy distribution. The star is dominated by dust emission in the L- and N- bands. The VISIR image confirms the presence of a large-scale dusty circumstellar envelope surrounding V Hya. The MATISSE reconstructed images show asymmetric and elongated structures in both infrared bands. In the L-band, we detected an elongated shape of approximately 15 mas, likely to be of photospheric origin. In the N-band, we found a 20 mas extension North-East from the star, and perpendicular to the L-band elongated axis. The position angle and the size of the N-band extension match the prediction of the companion position at MATISSE epoch. By comparing MATISSE N-band with MIDI data, we deduce that the elongation axis in the N-band has rotated since the previous interferometric measurements 13 years ago, supporting the idea that the particle enhancement is related to the dusty clump moving along with the companion. The MATISSE images unveil the presence of a dust enhancement at the companion position, opening new doors for further analysis on the binary interaction with an AGB component.

astro-ph.SR↗

arXiv2024

Images of Betelgeuse with VLTI/MATISSE across the Great Dimming

From Nov. 2019 to May 2020, the red supergiant star Betelgeuse experienced an unprecedented drop of brightness in the visible domain called the great dimming event. Large atmospheric dust clouds and large photospheric convective features are suspected to be responsible for it. To better understand the dimming event, we used mid-infrared long-baseline spectro-interferometric measurements of Betelgeuse taken with the VLTI/MATISSE instrument before (Dec. 2018), during (Feb. 2020), and after (Dec. 2020) the GDE. We present data in the 3.98 to 4.15\,$μ$m range to cover SiO spectral features molecules as well as adjacent continuum. We have employed geometrical models, image reconstruction, as well as radiative transfer models to monitor the spatial distribution of SiO over the stellar surface. We find a strongly in-homogeneous spatial distribution of SiO that appears to be looking very different between our observing epochs, indicative of a vigorous activity in the stellar atmosphere. The contrast of our images is small in the pseudo-continuum for all epochs, implying that our MATISSE observations support both cold spot and dust cloud model.

astro-ph.SR↗

arXiv2023

The dusty circumstellar environment of Betelgeuse during the Great Dimming as seen by VLTI/MATISSE

The 'Great Dimming' of the prototypical red supergiant Betelgeuse, which occurred between December 2019 and April 2020, gives us unprecedented insight into the processes occurring on the stellar surface and in the inner wind of this type of star. In particular it may bring further understanding of their dust nucleation and mass loss processes. Here, we present and analyse VLTI/MATISSE observations in the N-band (8 - 13 $μ$m) taken near the brightness minimum in order to assess the status of the dusty circumstellar environment. We explore the compatibility of a dust clump obscuring the star with our mid-infrared interferometric observations using continuum 3D radiative transfer modelling, and probe the effect of adding multiple clumps close to the star on the observables. We also test the viability of a large cool spot on the stellar surface without dust present in the ambient medium. Using the visibility data, we derive a uniform disk diameter of 59.02 $\pm$ 0.64 mas in the spectral range 8 to 8.75 $μ$m. We find that both the dust clump and the cool spot models are compatible with the data. Further to this, we note that the extinction and emission of our localised dust clump in the line of sight of the star, directly compensate each other making the clump undetectable in the spectral energy distribution and visibilities. The lack of infrared brightening during the 'Great Dimming' therefore does not exclude extinction due to a dust clump as one of the possible mechanisms. The visibilities can be reproduced by a spherical wind with dust condensing at 13 stellar radii and a dust mass-loss rate of (2.1 - 4.9) $\times$ 10$^{-10}$ $\mathit{M}_{\odot} {\rm yr}^{-1}$, however, in order to reproduce the complexity of the observed closure phases, additional surface features or dust clumps would be needed.

astro-ph.SR↗

arXiv2022

The disk of FU Orionis viewed with MATISSE/VLTI: first interferometric observations in $L$ and $M$ bands

The disk of FU Orionis is marginally resolved with MATISSE, suggesting that the region emitting in the thermal infrared is rather compact. An upper limit of $\sim1.3\pm0.1$ mas (in $L$) can be given for the diameter of the disk region probed in the $L$ band, corresponding to 0.5 au at the adopted Gaia EDR3 distance. This represents the hot, gaseous region of the accretion disk. The $N$-band data indicate that the dusty passive disk is silicate-rich. Only the innermost region of said dusty disk is found to emit strongly in the $N$ band, and it is resolved at an angular size of $\sim5$ mas, which translates to a diameter of about 2 au. The observations therefore place stringent constraints for the outer radius of the inner accretion disk. Dust radiative transfer simulations with RADMC-3D provide adequate fits to the spectral energy distribution from the optical to the submillimeter and to the interferometric observables when opting for an accretion rate $\dot{M}\sim 2\times 10^{-5}\, M_\odot$ yr$^{-1}$ and assuming $M_*=0.6\, M_\odot$. Most importantly, the hot inner accretion disk's outer radius can be fixed at 0.3 au. The outer radius of the dusty disk is placed at 100 au, based on constraints from scattered-light images in the literature. The dust mass contained in the disk is $2.4\times10^{-4}\, M_\odot$, and for a typical gas-to-dust ratio of 100, the total mass in the disk is approximately 0.02 $M_\odot$. We did not find any evidence for a nearby companion in the current interferometric data, and we tentatively explored the case of disk misalignment. For the latter, our modeling results suggest that the disk orientation is similar to that found in previous imaging studies by ALMA. Should there be an asymmetry in the very compact, inner accretion disk, this might be resolved at even smaller spatial scales ($\leq1$ mas).

astro-ph.SR↗

arXiv2022

Application limit of the photocentre displacement to fundamental stellar parameters of fast rotators -- Illustration on the edge-on fast rotator Regulus

Differential Interferometry allows to obtain the differential visibility and phase, in addition to the spectrum. The differential phase contains important information about the structure and motion of stellar photosphere such as stellar spots and non-radial pulsations, and particularly the rotation. Thus, this interferometric observable strongly helps to constrain the stellar fundamental parameters of fast rotators. The spectro-astrometry mainly uses the photocentre displacements, which is a first approximation of the differential phase, and is applicable only for unresolved or marginally objects. We study here the sensitivity of relevant stellar parameters to the simulated photocentres using the SCIROCCO code: a semi-analytical algorithm dedicated to fast rotators, applied to two theoretical modeling stars based on Achernar and Regulus, in order to classify the importance of these parameters and their impact on the modeling. We compare our simulations with published VLTI/AMBER data. This current work sets the limits of application of photocentre displacements to fast rotators, and under which conditions we can use the photocentres and/or the differential phase, through a pre-established physical criterion. To validate our theoretical study, we apply our method of analysis on observed data of the edge-on fast rotator Regulus. For unresolved targets, with a visibility $V\sim 1$, the photocentre can constrain the main stellar fundamental parameters of fast rotators, whereas from marginally resolved objects ($0.8 \leq V < 1$), mainly the rotation axis position angle ($\rm PA_{\rm rot}$) can be directly deduced from the vectorial photocentre displacement, which is very important for young cluster studies.

astro-ph.SR↗

arXiv2022

MATISSE, the VLTI mid-infrared imaging spectro-interferometer

Context:Optical interferometry is at a key development stage. ESO's VLTI has established a stable, robust infrastructure for long-baseline interferometry for general astronomical observers. The present second-generation instruments offer a wide wavelength coverage and improved performance. Their sensitivity and measurement accuracy lead to data and images of high reliability. Aims:We have developed MATISSE, the Multi AperTure mid-Infrared SpectroScopic Experiment, to access high resolution imaging in a wide spectral domain and explore topics such: stellar activity and mass loss; planet formation and evolution in the gas and dust disks around young stars; accretion processes around super massive black holes in AGN. Methods:The instrument is a spectro-interferometric imager covering three atmospheric bands (L,M,N) from 2.8 to 13.0 mu, combining four optical beams from the VLTI's telscopes. Its concept, related observing procedure, data reduction and calibration approach are the product of 30 years of instrumental research. The instrument utilizes a multi-axial beam combination that delivers spectrally dispersed fringes. The signal provides the following quantities at several spectral resolutions: photometric flux, coherent fluxes, visibilities, closure phases, wavelength differential visibilities and phases, and aperture-synthesis imaging. Results:We provide an overview of the physical principle of the instrument and its functionalities, the characteristics of the delivered signal, a description of the observing modes and of their performance limits. An ensemble of data and reconstructed images are illustrating the first acquired key observations. Conclusion:The instrument has been in operation at Cerro Paranal, ESO, Chile since 2018, and has been open for science use by the international community since April 2019. The first scientific results are being published now.

astro-ph.IM↗

arXiv2022

Improving the diameters of interferometric calibrators with MATISSE

A good knowledge of the angular diameters of stars used to calibrate the observables in stellar interferometry is fundamental. As the available precision for giant stars is worse than the required per cent level, we aim to improve the knowledge of many diameters using MATISSE (Multiple AperTure mid-Infrared SpectroScopic Experiment) data in its different instrumental configurations. Using the squared visibility MATISSE observable, we compute the angular diameter value, which ensures the best-fitting curves, assuming an intensity distribution of a uniform disc. We take into account that the transfer function varies over the wavelength and is different from one instrumental configuration to another. The uncertainties on the diameters are estimated using the residual bootstrap method. Using the low spectral resolution mode in the L band, we observed a set of 35 potential calibrators selected in the Mid-infrared stellar Diameter and Flux Compilation Catalogue with diameters ranging from about 1 to 3 mas. We reach a precision on the diameter estimates in the range 0.6 per cent to 4.1 per cent. The study of the stability of the transfer function in visibility over two nights makes us confident in our results. In addition, we identify one star, 75 Vir initially present in the calibrator lists, for which our method does not converge, and prove to be a binary star. This leads us to the conclusion that our method is actually necessary to improve the quality of the astrophysical results obtained with MATISSE, and that it can be used as a useful tool for 'bad calibrator' detection.

astro-ph.IM↗

arXiv2021

The extended atmosphere and circumstellar environment of the cool evolved star VX Sagittarii as seen by MATISSE

Context. VX Sgr is a cool, evolved, and luminous red star whose stellar parameters are difficult to determine, which affects its classification. Aims. We aim to spatially resolve the photospheric extent as well as the circumstellar environment. Methods. We used interferometric observations obtained with the MATISSE instrument in the L (3 to 4 μm), M (4.5 to 5 μm), and N (8 to 13 μm) bands. We reconstructed monochromatic images using the MIRA software. We used 3D radiation-hydrodynamics (RHD) simulations carried out with CO5BOLD and a uniform disc model to estimate the apparent diameter and interpret the stellar surface structures. Moreover, we employed the radiative transfer codes Optim3D and Radmc3D to compute the spectral energy distribution for the L, M, and N bands, respectively. Results. MATISSE observations unveil, for the first time, the morphology of VX Sgr across the L, M, and N bands. The reconstructed images show a complex morphology with brighter areas whose characteristics depend on the wavelength probed. We measured the angular diameter as a function of the wavelength and showed that the photospheric extent in the L and M bands depends on the opacity through the atmosphere. In addition to this, we also concluded that the observed photospheric inhomogeneities can be interpreted as convection-related surface structures. The comparison in the N band yielded a qualitative agreement between the N band spectrum and simple dust radiative transfer simulations. However, it is not possible to firmly conclude on the interpretation of the current data because of the difficulty in constraing the model parameters using the limited accuracy of our absolute flux calibration. Conclusions. MATISSE observations and the derived reconstructed images unveil the appearance of the stellar surface and circumstellar environment across a very large spectral domain for the first time.

astro-ph.SR↗

arXiv2021

VLTI-MATISSE L- and N-band aperture-synthesis imaging of the unclassified B[e] star FS Canis Majoris

Context: FS Canis Majoris (FS CMa, HD 45677) is an unclassified B[e] star surrounded by an inclined dust disk. The evolutionary stage of FS CMa is still debated. Perpendicular to the circumstellar disk, a bipolar outflow was detected. Infrared aperture-synthesis imaging provides us with a unique opportunity to study the disk structure. Aims: Our aim is to study the intensity distribution of the disk of FS CMa in the mid-infrared L and N bands. Methods: We performed aperture-synthesis imaging of FS CMa with the MATISSE instrument (Multi AperTure mid-Infrared SpectroScopic Experiment) in the low spectral resolution mode to obtain images in the L and N bands. We computed radiative transfer models that reproduce the L- and N-band intensity distributions of the resolved disks. Results: We present L- and N-band aperture-synthesis images of FS CMa reconstructed in the wavelength bands of 3.4-3.8 and 8.6-9.0 micrometer. In the L-band image, the inner rim region of an inclined circumstellar disk and the central object can be seen with a spatial resolution of 2.7 milliarcsec (mas). An inner disk cavity with an angular diameter of 6x12mas is resolved. The L-band disk consists of a bright northwestern (NW) disk region and a much fainter southeastern (SE) region. The images suggest that we are looking at the bright inner wall of the NW disk rim, which is on the far side of the disk. In the N band, only the bright NW disk region is seen. In addition to deriving the inclination and the inner disk radius, fitting the reconstructed brightness distributions via radiative transfer modeling allows one to constrain the innermost disk structure, in particular the shape of the inner disk rim.

astro-ph.SR↗

arXiv2021

First MATISSE L-band observations of HD 179218. Is the inner 10 au region rich in carbon dust particles?

Carbon is one of the most abundant components in the Universe. While silicates have been the main focus of solid phase studies in protoplanetary discs (PPDs), little is known about the solid carbon content especially in the planet-forming regions ($\sim $0.1 to 10 au). Fortunately, several refractory carbonaceous species present C-H bonds (such as hydrogenated nano-diamond and amorphous carbon as well as polycyclic aromatic hydrocarbons (PAHs)), which generate infrared (IR) features that can be used to trace the solid carbon reservoirs. The new mid-IR instrument MATISSE, installed at the Very Large Telescope Interferometer (VLTI), can spatially resolve the inner regions ($\sim$ 1 to 10 au) of PPDs and locate, down to the au-scale, the emission coming from carbon grains. Our aim is to provide a consistent view on the radial structure, down to the au-scale, as well as basic physical properties and the nature of the material responsible for the IR continuum emission in the inner disk region around HD 179218. We implemented a temperature-gradient model to interpret the disk IR continuum emission, based on a multiwavelength dataset comprising a broadband spectral energy distribution (SED) and VLTI H-, L-, and N-bands interferometric data obtained in low spectral resolution. Then, we added a ring-like component, representing the carbonaceous L-band features-emitting region, to assess its detectability in future higher spectral resolution observations employing mid-IR interferometry.

astro-ph.EP↗

arXiv2021

Mid-infrared circumstellar emission of the long-period Cepheid l Carinae resolved with VLTI/MATISSE

The nature of circumstellar envelopes (CSE) around Cepheids is still a matter of debate. The physical origin of their infrared (IR) excess could be either a shell of ionized gas, or a dust envelope, or both. This study aims at constraining the geometry and the IR excess of the environment of the long-period Cepheid $\ell$ Car (P=35.5 days) at mid-IR wavelengths to understand its physical nature. We first use photometric observations in various bands and Spitzer Space Telescope spectroscopy to constrain the IR excess of $\ell$ Car. Then, we analyze the VLTI/MATISSE measurements at a specific phase of observation, in order to determine the flux contribution, the size and shape of the environment of the star in the L band. We finally test the hypothesis of a shell of ionized gas in order to model the IR excess. We report the first detection in the L band of a centro-symmetric extended emission around l Car, of about 1.7$R_\star$ in FWHM, producing an excess of about 7.0\% in this band. In the N band, there is no clear evidence for dust emission from VLTI/MATISSE correlated flux and Spitzer data. On the other side, the modeled shell of ionized gas implies a more compact CSE ($1.13\pm0.02\,R_\star$) and fainter (IR excess of 1\% in the L band). We provide new evidences for a compact CSE of $\ell$ Car and we demonstrate the capabilities of VLTI/MATISSE for determining common properties of CSEs. While the compact CSE of $\ell$ Car is probably of gaseous nature, the tested model of a shell of ionized gas is not able to simultaneously reproduce the IR excess and the interferometric observations. Further Galactic Cepheids observations with VLTI/MATISSE are necessary for determining the properties of CSEs, which may also depend on both the pulsation period and the evolutionary state of the stars.

astro-ph.SR↗

arXiv2020

The asymmetric inner disk of the Herbig Ae star HD 163296 in the eyes of VLTI/MATISSE: evidence for a vortex?

Context. The inner few au region of planet-forming disks is a complex environment. High angular resolution observations have a key role in understanding the disk structure and the dynamical processes at work. Aims. In this study we aim to characterize the mid-infrared brightness distribution of the inner disk of the young intermediate-mass star HD 163296, from VLTI/MATISSE observations. Methods. We use geometric models to fit the data. Our models include a smoothed ring, a flat disk with inner cavity, and a 2D Gaussian. The models can account for disk inclination and for azimuthal asymmetries as well. We also perform numerical hydro-dynamical simulations of the inner edge of the disk. Results. Our modeling reveals a significant brightness asymmetry in the L-band disk emission. The brightness maximum of the asymmetry is located at the NW part of the disk image, nearly at the position angle of the semimajor axis. The surface brightness ratio in the azimuthal variation is $3.5 \pm 0.2$. Comparing our result on the location of the asymmetry with other interferometric measurements, we confirm that the morphology of the $r<0.3$ au disk region is time-variable. We propose that this asymmetric structure, located in or near the inner rim of the dusty disk, orbits the star. For the physical origin of the asymmetry, we tested a hypothesis where a vortex is created by Rossby wave instability, and we find that a unique large scale vortex may be compatible with our data. The half-light radius of the L-band emitting region is $0.33\pm 0.01$ au, the inclination is ${52^\circ}^{+5^\circ}_{-7^\circ}$, and the position angle is $143^\circ \pm 3^\circ$. Our models predict that a non-negligible fraction of the L-band disk emission originates inside the dust sublimation radius for $μ$m-sized grains. Refractory grains or large ($\gtrsim 10\ μ$m-sized) grains could be the origin for this emission.

astro-ph.SR↗