SearcharxivSearch

arXiv subjects

P. H. Dederichs

Publications and source records attributed to P. H. Dederichs.

At least 19 recordsLinked to original sources

A polarizable interatomic force field for TiO$_2$ parameterized using density functional theory

We report a classical interatomic force field for TiO$_2$, which has been parameterized using density functional theory forces, energies, and stresses in the rutile crystal structure. The reliability of this new classical potential is tested by evaluating the structural properties, equation of state, phonon properties, thermal expansion, and some thermodynamic quantities such as entropy, free energy, and specific heat under constant volume. The good agreement of our results with {\em ab initio} calculations and with experimental data, indicates that our force-field describes the atomic interactions of TiO$_2$ in the rutile structure very well. The force field can also describe the structures of the brookite and anatase crystals with good accuracy.

cond-mat.mtrl-sci

Kondo decoherence: finding the right spin model for iron impurities in gold and silver

We exploit the decoherence of electrons due to magnetic impurities, studied via weak localization, to resolve a longstanding question concerning the classic Kondo systems of Fe impurities in the noble metals gold and silver: which Kondo-type model yields a realistic description of the relevant multiple bands, spin and orbital degrees of freedom? Previous studies suggest a fully screened spin $S$ Kondo model, but the value of $S$ remained ambiguous. We perform density functional theory calculations that suggest $S = 3/2$. We also compare previous and new measurements of both the resistivity and decoherence rate in quasi 1-dimensional wires to numerical renormalization group predictions for $S=1/2,1$ and 3/2, finding excellent agreement for $S=3/2$.

cond-mat.str-el

Introduction to half-metallic Heusler alloys: Electronic Structure and Magnetic Properties

Intermetallic Heusler alloys are amongst the most attractive half-metallic systems due to the high Curie temperatures and the structural similarity to the binary semiconductors. In this review we present an overview of the basic electronic and magnetic properties of both Heusler families: the so-called half-Heusler alloys like NiMnSb and the the full-Heusler alloys like Co$_2$MnGe. \textit{Ab-initio} results suggest that both the electronic and magnetic properties in these compounds are intrinsically related to the appearance of the minority-spin gap. The total spin magnetic moment $M_t$ scales linearly with the number of the valence electrons $Z_t$, such that $M_t=Z_t-24$ for the full-Heusler and $M_t=Z_t-18$ for the half-Heusler alloys, thus opening the way to engineer new half-metallic alloys with the desired magnetic properties.

cond-mat.mtrl-sci

Non-collinear Korringa-Kohn-Rostoker Green function method: Application to 3d nanostructures on Ni(001)

Magnetic nanostructures on non-magnetic or magnetic substrates have attracted strong attention due to the development of new experimental methods with atomic resolution. Motivated by this progress we have extended the full-potential Korringa-Kohn-Rostoker (KKR) Green function method to treat non-collinear magnetic nanostructures on surfaces. We focus on magnetic 3d impurity nanoclusters, sitting as adatoms on or in the first surface layer on Ni(001), and investigate the size and orientation of the local moments and moreover the stabilization of non-collinear magnetic solutions. While clusters of Fe, Co, Ni atoms are magnetically collinear, non-collinear magnetic coupling is expected for Cr and Mn clusters on surfaces of elemental ferromagnets. The origin of frustration is the competition of the antiferromagnetic exchange coupling among the Cr or Mn atoms with the antiferromagnetic (for Cr) or ferromagnetic (for Mn) exchange coupling between the impurities and the substrate. We find that Cr and Mn first-neighbouring dimers and a Mn trimer on Ni(001) show non-collinear behavior nearly degenerate with the most stable collinear configuration. Increasing the distance between the dimer atoms leads to a collinear behavior, similar to the one of the single impurities. Finally, we compare some of the non-collinear {\it ab-initio} results to those obtained within a classical Heisenberg model, where the exchange constants are fitted to total energies of the collinear states; the agreement is surprisingly good.

cond-mat.mtrl-sci

Low temperature ferromagnetism in (Ga, Mn)N

The magnetic properties of dilute magnetic semiconductors (DMS) are calculated from first-principles by mapping the ab initio results on a classical Heisenberg model. It is found that the range of the exchange interaction in (Ga, Mn)N is very short ranged due to the exponential decay of the impurity wave function in the gap. Curie temperatures (Tc) of DMS are calculated by using the Monte Carlo method. It is found that the Tc values of (Ga, Mn)N are very low since, due to the short ranged interaction, percolation of the ferromagnetic coupling is difficult to achieve for small concentrations.

cond-mat.mtrl-sci

Vacancy complexes with oversized impurities in Si and Ge

In this paper we examine the electronic and geometrical structure of impurity-vacancy complexes in Si and Ge. Already Watkins suggested that in Si the pairing of Sn with the vacancy produces a complex with the Sn-atom at the bond center and the vacancy split into two half vacancies on the neighboring sites. Within the framework of density-functional theory we use two complementary ab initio methods, the pseudopotential plane wave (PPW) method and the all-electron Kohn-Korringa-Rostoker (KKR) method, to investigate the structure of vacancy complexes with 11 different sp-impurities. For the case of Sn in Si, we confirm the split configuration and obtain good agreement with EPR data of Watkins. In general we find that all impurities of the 5sp and 6sp series in Si and Ge prefer the split-vacancy configuration, with an energy gain of 0.5 to 1 eV compared to the substitutional complex. On the other hand, impurities of the 3sp and 4sp series form a (slightly distorted) substitutional complex. Al impurities show an exception from this rule, forming a split complex in Si and a strongly distorted substitutional complex in Ge. We find a strong correlation of these data with the size of the isolated impurities, being defined via the lattice relaxations of the nearest neighbors.

cond-mat.mtrl-sci

Cd-vacancy and Cd-interstitial complexes in Si and Ge

The electrical field gradient (EFG), measured e.g. in perturbed angular correlation (PAC) experiments, gives particularly useful information about the interaction of probe atoms like 111In / 111Cd with other defects. The interpretation of the EFG is, however, a difficult task. This paper aims at understanding the interaction of Cd impurities with vacancies and interstitials in Si and Ge, which represents a controversial issue. We apply two complementary ab initio methods in the framework of density functional theory (DFT), (i) the all electron Korringa-Kohn-Rostoker (KKR) Greenfunction method and (ii) the Pseudopotential-Plane-Wave (PPW) method, to search for the correct local geometry. Surprisingly we find that both in Si and Ge the substitutional Cd-vacancy complex is unstable and relaxes to a split-vacancy complex with the Cd on the bond-center site. This complex has a very small EFG, allowing a unique assignment of the small measured EFGs of 54MHz in Ge and 28MHz in Si. Also, for the Cd-selfinterstitial complex we obtain a highly symmetrical split configuration with large EFGs, being in reasonable agreement with experiments.

cond-mat.mtrl-sci

Multilayers of Zinc-Blende Half-Metals with Semiconductors

We report on first-principles calculations of multilayers of zinc-blende half-metallic ferromagnets CrAs and CrSb with III-V and II-VI semiconductors, in the [001] orientation. We examine the ideal and tetragonalised structures, as well as the case of an intermixed interface. We find that, as a rule, half-metallicity can be conserved throughout the heterostructures, provided that the character of the local coordination and bonding is not disturbed. At the interfaces with semiconductors, we describe a mechanism that can give also a non-integer spin moment per interface transition atom, and derive a simple rule to evaluate it.

cond-mat.mtrl-sci

Ballistic Spin Injection from Fe into ZnSe and GaAs with a (001), (111), and (110) orientation

We present first-principles calculations of ballistic spin injection in Fe/GaAs and Fe/ZnSe junctions with orientation (001), (111), and (110). We find that the symmetry mismatch of the Fe minority-spin states with the semiconductor conduction states can lead to extremely high spin polarization of the current through the (001) interface for hot and thermal injection processes. Such a symmetry mismatch does not exist for the (111) and (110) interfaces, where smaller spin injection efficiencies are found. The presence of interface states is found to lower the current spin polarization, both with and without a Schottky barrier. Finally, a higher bias can also affect the spin injection efficiency.

cond-mat.mtrl-sci

The effect of the spin-orbit interaction on the band gap of half-metals

The spin-orbit interaction can cause a nonvanishing density of states (DOS) within the minority-spin band gap of half-metals around the Fermi level. We examine the magnitude of the effect in Heusler alloys, zinc-blende half metals and diluted magnetic semiconductors, using first-principles calculations. We find that the ratio of spin-down to spin-up DOS at the Fermi level can range from below 1% (e.g. 0.5% for NiMnSb) over several percents (4.2% for (Ga,Mn)As) to 13% for MnBi.

cond-mat.mtrl-sci

A KKR Green function formalism for ballistic transport

We develop a method for the calculation of ballistic transport from first principles. The multiple scattering screened Korringa-Kohn-Rostoker (KKR) method is combined with a Green's function formulation of the Landauer approach for the ballistic transport. We obtain an efficient O(N) algorithm for the calculation of ballistic conductance through a scattering region connected to semi-infinite crystalline leads. In particular we generalize the results of Baranger and Stone in the case of Bloch wave boundary conditions and we discuss relevant properties of the S-matrix. We consider the implications on the application of the formalism in conjunction with a cellular multiple scattering description of the electronic structure, and demonstrate the convergence properties concerning the angular momentum expansions.

cond-mat.mtrl-sci

Half-metallic Zinc-blende Compounds

We report first-principles calculations of zinc-blende half-metals, identifying systems for epitaxial growth with semiconductors, and present calculations for CrAs/GaAs multilayers. We find that half-metallicity is conserved troughout the heterostructure, making this a good candidate for spintronics applications.

cond-mat.mtrl-sci

Origin and Properties of the Gap in the Half-Ferromagnetic Heusler Alloys

We study the origin of the gap and the role of chemical composition in the half-ferromagnetic Heusler alloys using the full-potential screened KKR method. In the paramagnetic phase the C1_b compounds, like NiMnSb, present a gap. Systems with 18 valence electrons, Z_t, per unit cell, like CoTiSb, are semiconductors, but when Z_t > 18 antibonding states are also populated, thus the paramagnetic phase becomes unstable and the half-ferromagnetic one is stabilized. The minority occupied bands accommodate a total of nine electrons and the total magnetic moment per unit cell in mu_B is just the difference between Z_t and $2 \times 9$. While the substitution of the transition metal atoms may preserve the half-ferromagnetic character, substituting the $sp$ atom results in a practically rigid shift of the bands and the loss of half-metallicity. Finally we show that expanding or contracting the lattice parameter by 2% preserves the minority-spin gap.

cond-mat

Slater-Pauling Behavior of the Half-Ferromagnetic Full-Heusler Alloys

Using the full-potential screened Korringa-Kohn-Rostoker method we study the full-Heusler alloys based on Co, Fe, Rh and Ru. We show that many of these compounds show a half-metallic behavior, however in contrast to the half-Heusler alloys the energy gap in the minority band is extremely small. These full-Heusler compounds show a Slater-Pauling behavior and the total spin-magnetic moment per unit cell (M_t) scales with the total number of valence electrons (Z_t) following the rule: M_t=Z_t-24. We explain why the spin-down band contains exactly 12 electrons using arguments based on the group theory and show that this rule holds also for compounds with less than 24 valence electrons. Finally we discuss the deviations from this rule and the differences compared to the half-Heusler alloys.

cond-mat

Ballistic Spin Injection from Fe(001) into ZnSe and GaAs

We consider the spin injection from Fe into ZnSe and GaAs in the ballistic limit. By means of the ab initio SKKR method we calculate the ground state properties of epitaxial Fe|ZnSe(001) and Fe|GaAs(001) heterostructures. Three injection processes are considered: injection of hot electrons and injection of "thermal" electrons with and without an interface barrier. The calculation of the conductance by the Landauer formula shows, that these interfaces act like a nearly ideal spin filter, with spin polarization as high as 99%. This can be traced back to the symmetry of the band structure of Fe for normal incidence.

cond-mat

Applicability of the Broken-Bond Rule to the Surface Energy of the fcc Metals

We apply the Green's function based full-potential screened Korringa-Kohn-Rostoker method in conjunction with the local density approximation to study the surface energies of the noble and the fcc transition and $sp$ metals. The orientation dependence of the transition metal surface energies can be well described taking into account only the broken bonds between first neighbors, quite analogous to the behavior we recently found for the noble metals [see cond-mat/0105207]. The (111) and (100) surfaces of the $sp$ metals show a jellium like behavior but for the more open surfaces we find again the noble metals behavior but with larger deviation from the broken-bond rule compared to the transition metals. Finally we show that the use of the full potential is crucial to obtain accurate surface energy anisotropy ratios for the vicinal surfaces.

cond-mat

Broken-Bond Rule for the Surface Energies of Noble Metals

Using two different full-potential ab-initio techniques we introduce a simple, universal rule based on the number of broken first-neighbor bonds to determine the surface energies of the three noble metals Cu, Ag and Au. When a bond is broken, the rearrangement of the electronic charge for these metals does not lead to a change of the remaining bonds. Thus the energy needed to break a bond is independent of the surface orientation. This novel finding can lead to the development of simple models to describe the energetics of a surface like step and kink formation, crystal growth, alloy formation, equilibrium shape of mesoscopic crystallites and surface faceting.

cond-mat