arXiv subjects

P. Holloway

Publications and source records attributed to P. Holloway.

13 recordsLinked to original sources

arXiv2026

Euclid Quick Data Release (Q1). AstroVink: A vision transformer approach to find strong gravitational lens systems

We present AstroVink, a vision transformer classifier designed for automated identification of strong lens candidates in Euclid imaging. We build upon the DINOv2 encoder, fine tuned to distinguish between lens and non-lens galaxies. Our base model, trained on simulated strong lens systems and labelled non lenses, recovers 88 of the 110 lens candidates within the top 500 ranked candidates, corresponding to an inspection efficiency of one lens per 5.7 inspected objects in our test set. After the Q1 data release, which yielded about 500 lens candidates, we retrained the model using high confidence lens candidates and new negatives, initially flagged as potential lenses by other classifiers but rejected during visual inspection. The retrained network further improves performance, achieving recovery of all 110 systems within the same ranking and reducing the inspection effort to one lens per 4.5 inspected objects, demonstrating that incorporating real examples significantly enhances model generalisation. An analysis of training subsets revealed that the inclusion of realistic negative examples played a key role in this improvement. Finally, we applied the retrained model to the Q1 original selection of 1.08M targets, followed by a new round of Space Warps citizen science inspection and expert vetting, where we identified a total of eight Grade A and 26 Grade B new lens candidates. These results demonstrate that transformer based architectures can recover strong lens candidates with high efficiency in real Euclid data, while substantially reducing the number of candidates requiring visual inspection.

astro-ph.IM↗

arXiv2026

Euclid Quick Data Release (Q1). The Strong Lensing Discovery Engine F -- Bright and low-redshift strong lenses

We present 72 additional galaxy-galaxy strong lenses that complement the sample discovered in the Euclid Quick Release 1 data (63.1 deg^2) of the Strong Lens Discovery Engine (SLDE) papers A-E. It is shown that previous pre-selection of potential lenses, which excluded objects from the Gaia catalogue, led to missing several bright and low-redshift strong lenses, adding more than 10% new strong lens candidates compared to the previous search. In total, the catalogue includes 38 "grade A" (confident) and 34 "grade B" (probable) candidates. These lenses are identified through a combination of two independent searches for bright nearby objects: one based on machine-learning models followed by expert visual inspection, and the other based solely on expert visual inspection, targeting objects not included in the initial machine-learning selection (a limitation identified only after extensive visual inspection). With these additional strong lens candidates, we augment the expected number of high-confidence candidates in the Euclid Wide Survey from previous forecasts to 120000. Detailed semi-automated lens modelling confirms at least 41 systems out of 72, a fraction consistent with that found in SLDE A (315 out of 488). These include: multiple edge-on disc lenses; sources with arcs near the lens centre; "red sources"; and an edge-on disk galaxy lensing a galaxy merger, producing two sets of lensed features, an Einstein ring and a doubly imaged component. The median redshift of these systems is $\Delta$ z ~ 0.3 lower than that of the SLDE A sample.

astro-ph.GA↗

arXiv2025

Euclid Quick Data Release (Q1). From simulations to sky: Advancing machine-learning lens detection with real Euclid data

In the era of large-scale surveys like Euclid, machine learning has become an essential tool for identifying rare yet scientifically valuable objects, such as strong gravitational lenses. However, supervised machine-learning approaches require large quantities of labelled examples to train on, and the limited number of known strong lenses has lead to a reliance on simulations for training. A well-known challenge is that machine-learning models trained on one data domain often underperform when applied to a different domain: in the context of lens finding, this means that strong performance on simulated lenses does not necessarily translate into equally good performance on real observations. In Euclid's Quick Data Release 1 (Q1), covering 63 deg2, 500 strong lens candidates were discovered through a synergy of machine learning, citizen science, and expert visual inspection. These discoveries now allow us to quantify this performance gap and investigate the impact of training on real data. We find that a network trained only on simulations recovers up to 92% of simulated lenses with 100% purity, but only achieves 50% completeness with 24% purity on real Euclid data. By augmenting training data with real Euclid lenses and non-lenses, completeness improves by 25-30% in terms of the expected yield of discoverable lenses in Euclid DR1 and the full Euclid Wide Survey. Roughly 20% of this improvement comes from the inclusion of real lenses in the training data, while 5-10% comes from exposure to a more diverse set of non-lenses and false-positives from Q1. We show that the most effective lens-finding strategy for real-world performance combines the diversity of simulations with the fidelity of real lenses. This hybrid approach establishes a clear methodology for maximising lens discoveries in future data releases from Euclid, and will likely also be applicable to other surveys such as LSST.

astro-ph.IM↗

arXiv2025

Does Machine Learning Work? A Comparative Analysis of Strong Gravitational Lens Searches in the Dark Energy Survey

We present a systematic comparison of three independent machine learning (ML)-based searches for strong gravitational lenses applied to the Dark Energy Survey (Jacobs et al. 2019a,b; Rojas et al. 2022; Gonzalez et al. 2025). Each search employs a distinct ML architecture and training strategy, allowing us to evaluate their relative performance, completeness, and complementarity. Using a visually inspected sample of 1651 systems previously reported as lens candidates, we assess how each model scores these systems and quantify their agreement with expert classifications. The three models show progressive improvement in performance, with F1-scores of 0.31, 0.35, and 0.54 for Jacobs, Rojas, and Gonzalez, respectively. Their completeness for moderate- to high-confidence lens candidates follows a similar trend (31%, 52%, and 70%). When combined, the models recover 82% of all such systems, highlighting their strong complementarity. Additionally, we explore ensemble strategies: average, median, linear regression, decision trees, random forests, and an Independent Bayesian method. We find that all but averaging achieve higher maximum F1 scores than the best individual model, with some ensemble methods improving precision by up to a factor of six. These results demonstrate that combining multiple, diverse ML classifiers can substantially improve the completeness of lens samples while drastically reducing false positives, offering practical guidance for optimizing future ML-based strong lens searches in wide-field surveys.

astro-ph.GA↗

arXiv2025

Euclid: Discovery of bright $z\simeq7$ Lyman-break galaxies in UltraVISTA and Euclid COSMOS

We present a search for $z\simeq7$ Lyman-break galaxies using the $1.72 \, \rm{deg}^2$ near-infrared UltraVISTA survey in the COSMOS field, reaching $5\,\sigma$ depths in $Y$ of 26.2. We incorporate deep optical and Spitzer imaging for a full spectral energy distribution (SED) fitting analysis. We find 289 candidate galaxies at $6.5\leq z \leq 7.5$ covering $-22.6 \leq M_{\rm UV} \leq -20.2$, faint enough to overlap with Hubble Space Telescope studies. We conduct a separate selection by including complementary Euclid performance verification imaging (reaching $5\,\sigma$ depths of $26.3$), yielding 140 galaxies in $0.65 \, \rm{deg}^2$, with 38 sources unique to this sample. We compute the rest-frame UV luminosity function (UV LF) from our samples, extending below the knee ($M^*=-21.14^{+0.28}_{-0.25}$). We find that the shape of the UV LF is consistent with both a Schechter function and double-power law (DPL) at the magnitudes probed by this sample, with a DPL preferred at $M_{\rm UV}<-22.5$ when bright-end results are included. The UltraVISTA+Euclid sample provides a clean measurement of the LF due to the overlapping near-infrared filters identifying molecular absorption features in the SEDs of ultra-cool dwarf interlopers, and additional faint galaxies are recovered. A comparison with JWST LFs at $z>7$ suggests a gentle evolution in the bright-end slope, although this is limited by a lack of robust bright-end measurements at $z>9$. We forecast that in the Euclid Deep Fields, the removal of contaminant ultra-cool dwarfs as point sources will be possible at $J_{\rm E} < 24.5$. Finally, we present a high-equivalent-width Lyman-$\alpha$ emitter candidate identified by combining HSC, VISTA, and Euclid broadband photometry, highlighting the synergistic power these instruments will have in the Euclid Auxiliary Fields for identifying extreme sources in the Epoch of Reionisation.

astro-ph.GA↗

arXiv2025

Euclid Quick Data Release (Q1). The Strong Lensing Discovery Engine C: Finding lenses with machine learning

Strong gravitational lensing has the potential to provide a powerful probe of astrophysics and cosmology, but fewer than 1000 strong lenses have been confirmed so far. With a 0.16'' resolution covering a third of the sky, the Euclid telescope will revolutionise the identification of strong lenses, with 170 000 lenses forecasted to be discovered amongst the 1.5 billion galaxies it will observe. We present an analysis of the performance of five machine-learning models at finding strong gravitational lenses in the quick release of Euclid data (Q1) covering 63 deg2. The models have been validated by citizen scientists and expert visual inspection. We focus on the best-performing network: a fine-tuned version of the Zoobot pretrained model originally trained to classify galaxy morphologies in heterogeneous astronomical imaging surveys. Of the one million Q1 objects that Zoobot was tasked to find strong lenses within, the top 1000 ranked objects contain 122 grade A lenses (almost-certain lenses) and 41 grade B lenses (probable lenses). A deeper search with the five networks combined with visual inspection yielded 250 (247) grade A (B) lenses, of which 224 (182) are ranked in the top 20 000 by Zoobot. When extrapolated to the full Euclid survey, the highest ranked one million images will contain 75 000 grade A or B strong gravitational lenses.

astro-ph.GA↗

arXiv2025

Euclid: The Early Release Observations Lens Search Experiment

We investigated the ability of the Euclid telescope to detect galaxy-scale gravitational lenses. To do so, we performed a systematic visual inspection of the $0.7\,\rm{deg}^2$ Euclid Early Release Observations data towards the Perseus cluster using both the high-resolution $I_{\scriptscriptstyle\rm E}$ band and the lower-resolution $Y_{\scriptscriptstyle\rm E}$, $J_{\scriptscriptstyle\rm E}$, $H_{\scriptscriptstyle\rm E}$ bands. Each extended source brighter than magnitude 23 in $I_{\scriptscriptstyle\rm E}$ was inspected by 41 expert human classifiers. This amounts to $12\,086$ stamps of $10^{\prime\prime}\,\times\,10^{\prime\prime}$. We found $3$ grade A and $13$ grade B candidates. We assessed the validity of these $16$ candidates by modelling them and checking that they are consistent with a single source lensed by a plausible mass distribution. Five of the candidates pass this check, five others are rejected by the modelling, and six are inconclusive. Extrapolating from the five successfully modelled candidates, we infer that the full $14\,000\,{\rm deg}^2$ of the Euclid Wide Survey should contain $100\,000^{+70\,000}_{-30\,000}$ galaxy-galaxy lenses that are both discoverable through visual inspection and have valid lens models. This is consistent with theoretical forecasts of $170\,000$ discoverable galaxy-galaxy lenses in Euclid. Our five modelled lenses have Einstein radii in the range $0.\!\!^{\prime\prime}68\,<\,θ_\mathrm{E}\,<1.\!\!^{\prime\prime}24$, but their Einstein radius distribution is on the higher side when compared to theoretical forecasts. This suggests that our methodology is likely missing small-Einstein-radius systems. Whilst it is implausible to visually inspect the full Euclid dataset, our results corroborate the promise that Euclid will ultimately deliver a sample of around $10^5$ galaxy-scale lenses.

astro-ph.GA↗

arXiv2025

Discovering Strong Gravitational Lenses in the Dark Energy Survey with Interactive Machine Learning and Crowd-sourced Inspection with Space Warps

We conduct a search for strong gravitational lenses in the Dark Energy Survey (DES) Year 6 imaging data. We implement a pre-trained Vision Transformer (ViT) for our machine learning (ML) architecture and adopt Interactive Machine Learning to construct a training sample with multiple classes to address common types of false positives. Our ML model reduces 236 million DES cutout images to 22,564 targets of interest, including around 85% of previously reported galaxy-galaxy lens candidates discovered in DES. These targets were visually inspected by citizen scientists, who ruled out approximately 90% as false positives. Of the remaining 2,618 candidates, 149 were expert-classified as 'definite' lenses and 516 as 'probable' lenses, with 147 of these candidates being newly identified. Additionally, we trained a second ViT to find double-source plane lens systems, finding at least one double-source system. Our main ViT excels at identifying galaxy-galaxy lenses, consistently assigning high scores to candidates with high confidence. The top 800 ViT-scored images include around 100 of our `definite' lens candidates. This selection is an order of magnitude higher in purity than previous convolutional neural network-based lens searches and demonstrates the feasibility of applying our methodology for discovering large samples of lenses in future surveys.

astro-ph.GA↗

arXiv2025

Euclid Quick Data Release (Q1): The Strong Lensing Discovery Engine A -- System overview and lens catalogue

We present a catalogue of 497 galaxy-galaxy strong lenses in the Euclid Quick Release 1 data (63 deg$^2$). In the initial 0.45\% of Euclid's surveys, we double the total number of known lens candidates with space-based imaging. Our catalogue includes 250 grade A candidates, the vast majority of which (243) were previously unpublished. Euclid's resolution reveals rare lens configurations of scientific value including double-source-plane lenses, edge-on lenses, complete Einstein rings, and quadruply-imaged lenses. We resolve lenses with small Einstein radii ($θ_{\rm E} < 1''$) in large numbers for the first time. These lenses are found through an initial sweep by deep learning models, followed by Space Warps citizen scientist inspection, expert vetting, and system-by-system modelling. Our search approach scales straightforwardly to Euclid Data Release 1 and, without changes, would yield approximately 7000 high-confidence (grade A or B) lens candidates by late 2026. Further extrapolating to the complete Euclid Wide Survey implies a likely yield of over 100000 high-confidence candidates, transforming strong lensing science.

astro-ph.GA↗

arXiv2025

Euclid Quick Data Release (Q1). The Strong Lensing Discovery Engine D -- Double-source-plane lens candidates

Strong gravitational lensing systems with multiple source planes are powerful tools for probing the density profiles and dark matter substructure of the galaxies. The ratio of Einstein radii is related to the dark energy equation of state through the cosmological scaling factor $β$. However, galaxy-scale double-source-plane lenses (DSPLs) are extremely rare. In this paper, we report the discovery of four new galaxy-scale double-source-plane lens candidates in the Euclid Quick Release 1 (Q1) data. These systems were initially identified through a combination of machine learning lens-finding models and subsequent visual inspection from citizens and experts. We apply the widely-used {\tt LensPop} lens forecasting model to predict that the full \Euclid survey will discover 1700 DSPLs, which scales to $6 \pm 3$ DSPLs in 63 deg$^2$, the area of Q1. The number of discoveries in this work is broadly consistent with this forecast. We present lens models for each DSPL and infer their $β$ values. Our initial Q1 sample demonstrates the promise of \Euclid to discover such rare objects.

astro-ph.GA↗

arXiv2025

Euclid Quick Data Release (Q1). The Strong Lensing Discovery Engine E -- Ensemble classification of strong gravitational lenses: lessons for Data Release 1

The Euclid Wide Survey (EWS) is expected to identify of order $100\,000$ galaxy-galaxy strong lenses across $14\,000$deg$^2$. The Euclid Quick Data Release (Q1) of $63.1$deg$^2$ Euclid images provides an excellent opportunity to test our lens-finding ability, and to verify the anticipated lens frequency in the EWS. Following the Q1 data release, eight machine learning networks from five teams were applied to approximately one million images. This was followed by a citizen science inspection of a subset of around $100\,000$ images, of which $65\%$ received high network scores, with the remainder randomly selected. The top scoring outputs were inspected by experts to establish confident (grade A), likely (grade B), possible (grade C), and unlikely lenses. In this paper we combine the citizen science and machine learning classifiers into an ensemble, demonstrating that a combined approach can produce a purer and more complete sample than the original individual classifiers. Using the expert-graded subset as ground truth, we find that this ensemble can provide a purity of $52\pm2\%$ (grade A/B lenses) with $50\%$ completeness (for context, due to the rarity of lenses a random classifier would have a purity of $0.05\%$). We discuss future lessons for the first major Euclid data release (DR1), where the big-data challenges will become more significant and will require analysing more than $\sim300$ million galaxies, and thus time investment of both experts and citizens must be carefully managed.

astro-ph.GA↗

arXiv2024

Euclid: Searches for strong gravitational lenses using convolutional neural nets in Early Release Observations of the Perseus field

The Euclid Wide Survey (EWS) is predicted to find approximately 170 000 galaxy-galaxy strong lenses from its lifetime observation of 14 000 deg^2 of the sky. Detecting this many lenses by visual inspection with professional astronomers and citizen scientists alone is infeasible. Machine learning algorithms, particularly convolutional neural networks (CNNs), have been used as an automated method of detecting strong lenses, and have proven fruitful in finding galaxy-galaxy strong lens candidates. We identify the major challenge to be the automatic detection of galaxy-galaxy strong lenses while simultaneously maintaining a low false positive rate. One aim of this research is to have a quantified starting point on the achieved purity and completeness with our current version of CNN-based detection pipelines for the VIS images of EWS. We select all sources with VIS IE < 23 mag from the Euclid Early Release Observation imaging of the Perseus field. We apply a range of CNN architectures to detect strong lenses in these cutouts. All our networks perform extremely well on simulated data sets and their respective validation sets. However, when applied to real Euclid imaging, the highest lens purity is just 11%. Among all our networks, the false positives are typically identifiable by human volunteers as, for example, spiral galaxies, multiple sources, and artefacts, implying that improvements are still possible, perhaps via a second, more interpretable lens selection filtering stage. There is currently no alternative to human classification of CNN-selected lens candidates. Given the expected 10^5 lensing systems in Euclid, this implies 10^6 objects for human classification, which while very large is not in principle intractable and not without precedent.

astro-ph.IM↗

arXiv2020

I22: SAXS/WAXS beamline at Diamond Light Source -- an overview of 10 years operation

Beamline I22 at Diamond Light Source is dedicated to the study of soft matter systems from both biological and materials science. The beamline can operate in the range 3.7 keV to 22 keV for transmission SAXS and 14 keV to 20 keV for microfocus SAXS with beamsizes 240 x 60 μm$^{2}$ spot [Full width half maximum (FWHM) Horizontal (H) x Vertical (V)] at sample for the main beamline, and approximately 10 x 10 μm$^{2}$ for the dedicated microfocussing platform. There is a versatile sample platform for accommodating a range of facility, and user developed, sample environments. The high brilliance of the insertion device source on I22 allows structural investigation of materials under extreme environments (for example fluid flow at high pressures and temperatures). I22 provides reliable access to millisecond timescales, essential to understanding kinetic processes such as early folding events in proteins or structural evolution in polymers and colloids.

physics.ins-det↗