arXiv subjects

P. Huang

Publications and source records attributed to P. Huang.

At least 19 recordsLinked to original sources

arXiv2026

High-Rate Free-Space Continuous-Variable QKD with Self-Referenced Passive State Preparation

Continuous-variable quantum key distribution (CVQKD) using passive state preparation (PSP) offers low-cost, high-rate secure communication. However, the existing PSP-CVQKD scheme with a transmitted local oscillator has high photon leakage noise and poor stability, making it unsuitable for high-loss transmission. In this work, for the first time, we propose and implement a local local oscillator (LLO) CVQKD system using a self-referenced (SR) PSP scheme, and give a theoretical proof of the equivalence of the PSP and GMCS protocol using temporal-mode theory. By employing the novel self-referenced pilot scheme to achieve high-precision time-varying frequency and phase compensation algorithms, we significantly improve the system' s signal-to-noise ratio and stability. The system achieves a record-high asymptotic secret key rate of 10.34 Mbps over a free-space channel with up to 23.5 dB loss, while maintaining low excess noise and robust performance under turbulent conditions. This work establishes the feasibility of SR-LLO CVQKD, providing a practical pathway toward secure, high-rate quantum communication in realistic environments.

quant-ph↗

arXiv2025

Measurement of reactor antineutrino oscillations with 1.46 ktonne-years of data at SNO+

The SNO+ Collaboration reports new results on reactor antineutrino oscillations using data acquired from May 2022 through July 2025. The spectral analysis of a flux dominated by nuclear reactors at 240, 350, and 355 kilometers yields the mass-squared difference $\Delta m^2_{21}=(7.93^{+0.21}_{-0.24})\times 10^{-5}$ eV$^2$. This result is compatible with and approaches the precision of the only other long-baseline reactor antineutrino measurement, by KamLAND. Combining these measurements, along with those from solar neutrino experiments, the global values of the neutrino mixing parameters become: $\Delta m^2_{21}$ = $(7.63\pm0.17)\times 10^{-5}$ eV$^2$ and $\sin^2{\theta_{12}}=0.310\pm0.012$. The analysis of geoneutrinos at SNO+ is also improved, with a measured signal of 49$^{+13}_{-12}$ TNU.

hep-ex↗

arXiv2025

Cosmogenic Neutron Production in Water at SNO+

Accurate measurement of the cosmogenic muon-induced neutron yield is crucial for constraining a significant background in a wide range of low-energy physics searches. Although previous underground experiments have measured this yield across various cosmogenic muon energies, SNO+ is uniquely positioned due to its exposure to one of the highest average cosmogenic muon energies at $364\,\text{GeV}$. Using ultra-pure water, we have determined a neutron yield of $Y_{n}=(3.38^{+0.23}_{-0.30})\times10^{-4}\,\text{cm}^{2}\text{g}^{-1}\mu^{-1}$ at SNO+. Comparison with simulations demonstrates clear agreement with the FLUKA neutron production model, highlighting discrepancies with the widely used GEANT4 model. Furthermore, this measurement reveals a lower cosmogenic neutron yield than that observed by the SNO experiment, which used heavy water under identical muon flux conditions. This result provides new evidence that nuclear structure and target material composition significantly influence neutron production by cosmogenic muons, offering fresh insight with important implications for the design and background modelling of future underground experiments.

hep-ex↗

arXiv2025

First Evidence of Solar Neutrino Interactions on $^{13}$C

The SNO+ Collaboration reports the first evidence of $^{8}\text{B}$ solar neutrinos interacting on $^{13}\text{C}$ nuclei. The charged current interaction proceeds through $^{13}\text{C} + \nu_e \rightarrow {}^{13}\text{N} + e^-$ which is followed, with a 10 minute half-life, by ${}^{13}\text{N} \rightarrow {}^{13}\text{C} + e^+ +\nu_e .$ The detection strategy is based on the delayed coincidence between the electron and the positron. Evidence for the charged current signal is presented with a significance of 4.2$\sigma$. Using the natural abundance of $^{13}\text{C}$ present in the scintillator, 5.7 tonnes of $^{13}\text{C}$ over 231 days of data were used in this analysis. The 5.6$^{+3.0}_{-2.3}$ observed events in the data set are consistent with the expectation of 4.7$^{+0.6}_{-1.3}$ events. This result is the second real-time measurement of CC interactions of $^{8}\text{B}$ neutrinos with nuclei and constitutes the lowest energy observation of neutrino interactions on $^{13}\text{C}$ generally. This enables the first direct measurement of the CC $\nu_e$ reaction to the ground state of ${}^{13}\text{N}$, yielding an average cross section of $(16.1 ^{+8.5}_{-6.7} (\text{stat.}) ^{+1.6}_{-2.7} (\text{syst.}) )\times 10^{-43}$ cm$^{2}$ over the relevant $^{8}\text{B}$ solar neutrino energies.

nucl-ex↗

arXiv2024

Measurement of the $^8$B Solar Neutrino Flux Using the Full SNO+ Water Phase Dataset

The SNO+ detector operated initially as a water Cherenkov detector. The implementation of a sealed covergas system midway through water data taking resulted in a significant reduction in the activity of $^{222}$Rn daughters in the detector and allowed the lowest background to the solar electron scattering signal above 5 MeV achieved to date. This paper reports an updated SNO+ water phase $^8$B solar neutrino analysis with a total livetime of 282.4 days and an analysis threshold of 3.5 MeV. The $^8$B solar neutrino flux is found to be $\left(2.32^{+0.18}_{-0.17}\text{(stat.)}^{+0.07}_{-0.05}\text{(syst.)}\right)\times10^{6}$ cm$^{-2}$s$^{-1}$ assuming no neutrino oscillations, or $\left(5.36^{+0.41}_{-0.39}\text{(stat.)}^{+0.17}_{-0.16}\text{(syst.)} \right)\times10^{6}$ cm$^{-2}$s$^{-1}$ assuming standard neutrino oscillation parameters, in good agreement with both previous measurements and Standard Solar Model Calculations. The electron recoil spectrum is presented above 3.5 MeV.

hep-ex↗

arXiv2024

Initial measurement of reactor antineutrino oscillation at SNO+

The SNO+ collaboration reports its first spectral analysis of long-baseline reactor antineutrino oscillation using 114 tonne-years of data. Fitting the neutrino oscillation probability to the observed energy spectrum yields constraints on the neutrino mass-squared difference $\Delta m^2_{21}$. In the ranges allowed by previous measurements, the best-fit $\Delta m^2_{21}$ is (8.85$^{+1.10}_{-1.33}$) $\times$ 10$^{-5}$ eV$^2$. This measurement is continuing in the next phases of SNO+ and is expected to surpass the present global precision on $\Delta m^2_{21}$ with about three years of data.

hep-ex↗

arXiv2022

Input optics systems of the KAGRA detector during O3GK

KAGRA, the underground and cryogenic gravitational-wave detector, was operated for its solo observation from February 25th to March 10th, 2020, and its first joint observation with the GEO 600 detector from April 7th -- 21st, 2020 (O3GK). This study presents an overview of the input optics systems of the KAGRA detector, which consist of various optical systems, such as a laser source, its intensity and frequency stabilization systems, modulators, a Faraday isolator, mode-matching telescopes, and a high-power beam dump. These optics were successfully delivered to the KAGRA interferometer and operated stably during the observations. The laser frequency noise was observed to limit the detector sensitivity above a few kHz, whereas the laser intensity did not significantly limit the detector sensitivity.

gr-qc↗

arXiv2022

Noise subtraction from KAGRA O3GK data using Independent Component Analysis

In April 2020, KAGRA conducted its first science observation in combination with the GEO~600 detector (O3GK) for two weeks. According to the noise budget estimation, suspension control noise in the low frequency band and acoustic noise in the middle frequency band are identified as the dominant contribution. In this study, we show that such noise can be reduced in offline data analysis by utilizing a method called Independent Component Analysis (ICA). Here the ICA model is extended from the one studied in iKAGRA data analysis by incorporating frequency dependence while linearity and stationarity of the couplings are still assumed. By using optimal witness sensors, those two dominant contributions are mitigated in the real observational data. We also analyze the stability of the transfer functions for whole two weeks data in order to investigate how the current subtraction method can be practically used in gravitational wave search.

astro-ph.IM↗

arXiv2022

Performance of the KAGRA detector during the first joint observation with GEO 600 (O3GK)

KAGRA, the kilometer-scale underground gravitational-wave detector, is located at Kamioka, Japan. In April 2020, an astrophysics observation was performed at the KAGRA detector in combination with the GEO 600 detector; this observation operation is called O3GK. The optical configuration in O3GK is based on a power recycled Fabry-P\'{e}rot Michelson interferometer; all the mirrors were set at room temperature. The duty factor of the operation was approximately 53%, and the strain sensitivity was $3\times10^{-22}~/\sqrt{\rm{Hz}}$ at 250 Hz. In addition, the binary-neutron-star (BNS) inspiral range was approximately 0.6 Mpc. The contributions of various noise sources to the sensitivity of O3GK were investigated to understand how the observation range could be improved; this study is called a "noise budget". According to our noise budget, the measured sensitivity could be approximated by adding up the effect of each noise. The sensitivity was dominated by noise from the sensors used for local controls of the vibration isolation systems, acoustic noise, shot noise, and laser frequency noise. Further, other noise sources that did not limit the sensitivity were investigated. This paper provides a detailed account of the KAGRA detector in O3GK including interferometer configuration, status, and noise budget. In addition, strategies for future sensitivity improvements such as hardware upgrades, are discussed.

astro-ph.IM↗

arXiv2021

Carbon and vacancy centers in hexagonal boron nitride

Creation of defect with predetermined optical, chemical and other characteristics is a powerful tool to enhance the functionalities of materials. Herewith, we utilize density functional theory to understand the microscopic mechanisms of formation of defects in hexagonal boron nitride based on vacancies and substitutional atoms. Through in-depth analysis of the defect-induced band structure and formation energy in varying growth conditions, we uncovered a dominant role of interdefect electron paring in stabilization of defect complexes. The electron reorganization modifies the exchange component of the electronic interactions which dominates over direct Coulomb repulsion or structural relaxation effects making the combination of acceptor- and donor-type defect centers energetically favorable. Based on an analysis of a large number of defect complexes we develop a simple picture of the inheritance of electronic properties when individual defects are combined together to form more complex centers.

cond-mat.mtrl-sci↗

arXiv2021

Atomic and electronic structure of defects in hBN: enhancing single-defect functionalities

Defect centers in insulators play a critical role in creating important functionalities in materials: prototype qubits, single-photon sources, magnetic field probes, and pressure sensors. These functionalities are highly dependent on their mid-gap electronic structure and orbital/spin wave-function contributions. However, in most cases, these fundamental properties remain unknown or speculative due to the defects being deeply embedded beneath the surface of highly resistive host crystals, thus impeding access through surface probes. Here, we directly inspected the atomic and electronic structures of defects in thin carbon-doped hexagonal boron nitride (hBN:C) using scanning tunneling microscopy (STM) and scanning tunneling spectroscopy (STS). Such investigation adds direct information about the electronic mid-gap states to the well-established photoluminescence response (including single photon emission) of intentionally created carbon defects in the most commonly investigated van der Waals insulator. Our joint atomic-scale experimental and theoretical investigations reveal two main categories of defects: 1) single-site defects manifesting as donor-like states with atomically resolved structures observable via STM, and 2) multi-site defect complexes exhibiting a ladder of empty and occupied mid-gap states characterized by distinct spatial geometries. Combining direct probing of mid-gap states through tunneling spectroscopy with the inspection of the optical response of insulators hosting specific defect structures holds promise for creating and enhancing functionalities realized with individual defects in the quantum limit. These findings underscore not only the versatility of hBN:C as a platform for quantum defect engineering but also its potential to drive advancements in atomic-scale optoelectronics.

cond-mat.mtrl-sci↗

arXiv2021

Overview of KAGRA: Calibration, detector characterization, physical environmental monitors, and the geophysics interferometer

KAGRA is a newly built gravitational wave observatory, a laser interferometer with a 3 km arm length, located in Kamioka, Gifu, Japan. In this series of articles, we present an overview of the baseline KAGRA, for which we finished installing the designed configuration in 2019. This article describes the method of calibration (CAL) used for reconstructing gravitational wave signals from the detector outputs, as well as the characterization of the detector (DET). We also review the physical environmental monitors (PEM) system and the geophysics interferometer (GIF). Both are used for characterizing and evaluating the data quality of the gravitational wave channel. They play important roles in utilizing the detector output for gravitational wave searches. These characterization investigations will be even more important in the near future, once gravitational wave detection has been achieved, and in using KAGRA in the gravitational wave astronomy era.

gr-qc↗

arXiv2020

Overview of KAGRA : KAGRA science

KAGRA is a newly build gravitational-wave observatory, a laser interferometer with 3 km arm length, located in Kamioka, Gifu, Japan. In this paper in the series of KAGRA-featured articles, we discuss the science targets of KAGRA projects, considering not only the baseline KAGRA (current design) but also its future upgrade candidates (KAGRA+) for the near to middle term (~5 years).

gr-qc↗

arXiv2020

Application of the independent component analysis to the iKAGRA data

We apply the independent component analysis (ICA) to the real data from a gravitational wave detector for the first time. Specifically we use the iKAGRA data taken in April 2016, and calculate the correlations between the gravitational wave strain channel and 35 physical environmental channels. Using a couple of seismic channels which are found to be strongly correlated with the strain, we perform ICA. Injecting a sinusoidal continuous signal in the strain channel, we find that ICA recovers correct parameters with enhanced signal-to-noise ratio, which demonstrates usefulness of this method. Among the two implementations of ICA used here, we find the correlation method yields the optimal result for the case environmental noises act on the strain channel linearly.

astro-ph.IM↗

arXiv2020

Higgs boson potential at colliders: status and perspectives

This document summarises the current theoretical and experimental status of the di-Higgs boson production searches, and of the direct and indirect constraints on the Higgs boson self-coupling, with the wish to serve as a useful guide for the next years. The document discusses the theoretical status, including state-of-the-art predictions for di-Higgs cross sections, developments on the effective field theory approach, and studies on specific new physics scenarios that can show up in the di-Higgs final state. The status of di-Higgs searches and the direct and indirect constraints on the Higgs self-coupling at the LHC are presented, with an overview of the relevant experimental techniques, and covering all the variety of relevant signatures. Finally, the capabilities of future colliders in determining the Higgs self-coupling are addressed, comparing the projected precision that can be obtained in such facilities. The work has started as the proceedings of the Di-Higgs workshop at Colliders, held at Fermilab from the 4th to the 9th of September 2018, but it went beyond the topics discussed at that workshop and included further developments.

hep-ph↗

arXiv2019

An arm length stabilization system for KAGRA and future gravitational-wave detectors

Modern ground-based gravitational wave (GW) detectors require a complex interferometer configuration with multiple coupled optical cavities. Since achieving the resonances of the arm cavities is the most challenging among the lock acquisition processes, the scheme called arm length stabilization (ALS) had been employed for lock acquisition of the arm cavities. We designed a new type of the ALS, which is compatible with the interferometers having long arms like the next generation GW detectors. The features of the new ALS are that the control configuration is simpler than those of previous ones and that it is not necessary to lay optical fibers for the ALS along the kilometer-long arms of the detector. Along with simulations of its noise performance, an experimental test of the new ALS was performed utilizing a single arm cavity of KAGRA. This paper presents the first results of the test where we demonstrated that lock acquisition of the arm cavity was achieved using the new ALS and residual noise was measured to be $8.2\,\mathrm{Hz}$ in units of frequency, which is smaller than the linewidth of the arm cavity and thus low enough to lock the full interferometer of KAGRA in a repeatable and reliable manner.

physics.ins-det↗

arXiv2018

Laser-Induced Skyrmion Writing and Erasing in an Ultrafast Cryo-Lorentz Transmission Electron Microscopy

We demonstrate that light-induced heat pulses of different duration and energy can write skyrmions in a broad range of temperatures and magnetic field in FeGe. Using a combination of camera-rate and pump-probe cryo-Lorentz Transmission Electron Microscopy, we directly resolve the spatio-temporal evolution of the magnetization ensuing optical excitation. The skyrmion lattice was found to maintain its structural properties during the laser-induced demagnetization, and its recovery to the initial state happened in the sub-μs to μs range, depending on the cooling rate of the system.

cond-mat.str-el↗

arXiv2018

2D materials coupled to hybrid metal-dielectric waveguides for THz technology

In this letter, we propose hybrid metal-dielectric waveguides coupled to 2D materials that provide strong light-matter interaction at THz frequencies. We investigate the properties of the fundamental propagating modes and show that the strength of in-plane electric field components is maximized at the top of the dielectric strip on which the 2D material is deposited. Our simulation predicts 100 % modulation of THz light by tuning the Fermi level of a graphene sheet deposited onto a 1mm-long waveguide. We also show the potential of graphene multilayers coupled to these waveguides for achieving lasing at THz frequency. Our approach is compatible with CMOS or THz quantum cascade laser technologies.

physics.optics↗