arXiv subjects

P. Jain

Publications and source records attributed to P. Jain.

At least 19 recordsLinked to original sources

arXiv2025

An automated algorithmic method to mitigate long-term variations in the efficiency of the GRAPES-3 muon telescope

The GRAPES-3 large area muon telescope with its sixteen independent modules records the high energy (>1 GeV) muons continuously over 2.3 sr of the sky. However, the recorded muon rates are contaminated by instrumental effects and instabilities spanning both short- and long-timescales, such as variations in the efficiency of the detector. We present an automated, algorithmic method, which employs Bayesian blocks to discretize the data stream into periods and exploits the correlations among the sixteen independent modules of the muon telescope to separate the impact of these instrumental problems from those originating in physical effects of interest, allowing the Savitzky-Golay filter to be employed to mitigate the former. Compared to legacy methods, this method is less dependent on subjective input from experimental operators and provides a data stream free of all known instrumental effects over calendar years. The muon rate obtained with the new method shows a fairly better correlation with neutron monitor data, than that obtained with the legacy method.

astro-ph.IM↗

arXiv2023

Small-scale cosmic ray anisotropy observed by the GRAPES-3 experiment at TeV energies

GRAPES-3 is a mid-altitude (2200 m) and near equatorial ($11.4^{\circ}$ North) air shower array, overlapping in its field of view for cosmic ray observations with experiments that are located in Northern and Southern hemispheres. We analyze a sample of $3.7\times10^9$ cosmic ray events collected by the GRAPES-3 experiment between 1 January 2013 and 31 December 2016 with a median energy of $\sim16$ TeV for study of small-scale ($<60^{\circ}$) angular scale anisotropies. We observed two structures labeled as A and B, deviate from the expected isotropic distribution of cosmic rays in a statistically significant manner. Structure `A' spans $50^{\circ}$ to $80^{\circ}$ in the right ascension and $-15^{\circ}$ to $30^{\circ}$ in the declination coordinate. The relative excess observed in the structure A is at the level of $(6.5\pm1.3)\times10^{-4}$ with a statistical significance of 6.8 standard deviations. Structure `B' is observed in the right ascension range of $110^{\circ}$ to $140^{\circ}$. The relative excess observed in this region is at the level of $(4.9\pm1.4)\times10^{-4}$ with a statistical significance of 4.7 standard deviations. These structures are consistent with those reported by Milagro, ARGO-YBJ, and HAWC. These observations could provide a better understanding of the cosmic ray sources, propagation and the magnetic structures in our Galaxy.

astro-ph.HE↗

arXiv2023

2D electromagnetic simulations of RF heating via inductive coupling in the SPIDER device

SPIDER is the prototype ion source of MITICA, the full-size neutral beam heating system conceived for the ITER tokamak. It includes eight drivers to heat and sustain the inductively coupled plasma (ICP). Owing to their near cylindrical symmetry, the coupling between the radio-frequency (RF) active currents and the source plasma is studied using a 2D electromagnetic approach with simplified expressions for the plasma electrical conductivity taken from the literature. The power absorbed by the plasma and the effect of the induced plasma currents in lowering the inductance of the driver are based on data from the dedicated S16 experimental campaign (y.~2020) of SPIDER: plasma electron densities on the order of $10^{18}$ m$^{-3}$, electron temperatures $\sim 10$ eV; neutral gas pressure $\sim 0.3$ Pa and up to $50$ kW of net power per driver. It is found that the plasma conductivity cannot be explained by the friction forces associated to local collisional processes alone. The inclusion of an effective collisionality associated to non-local processes seems also insufficient to explain the experimental information. Only when the electrical conductivity is reduced where the RF magnetic field is more intense, can the heating power and driver inductance be acceptably reproduced. We present the first 2D electromagnetic ICP calculations in SPIDER for two types of plasma, without and with the addition of a static magnetic field. The power transfer efficiency to the plasma of the first drivers of SPIDER, in view of these models, is around 50%

physics.plasm-ph↗

arXiv2023

Lessons learned after three years of SPIDER operation and the first MITICA integrated tests

ITER envisages the use of two heating neutral beam injectors plus an optional one as part of the auxiliary heating and current drive system. The 16.5 MW expected neutral beam power per injector is several notches higher than worldwide existing facilities. A Neutral Beam Test Facility (NBTF) was established at Consorzio RFX, exploiting the synergy of two test beds, SPIDER and MITICA. SPIDER is dedicated to developing and characterizing large efficient negative ion sources at relevant parameters in ITER-like conditions: source and accelerator located in the same vacuum where the beam propagates, immunity to electromagnetic interferences of multiple radio-frequency (RF) antennas, avoidance of RF-induced discharges on the outside of the source. Three years of experiments on SPIDER have addressed to the necessary design modifications to enable full performances. The source is presently under a long shut-down phase to incorporate learnings from the experimental campaign. Parallelly, developments on MITICA, the full-scale prototype of the ITER NBI featuring a 1 MV accelerator and ion neutralization, are underway including manufacturing of in-vessel components, while power supplies and auxiliary plants are already under final testing and commissioning. Integration, commissioning and tests of the 1MV power supplies are essential for this first-of-kind system, unparalleled both in research and industry field. The integrated test to confirm 1MV output by combining invertor systems, DC generators and transmission lines extracted errors/accidents in some components. To realize a concrete system for ITER, solutions for the repair and the improvement of the system were developed. Hence, NBTF is emerging as a necessary facility, due to the large gap with existing injectors, effectively dedicated to identify issues and find solutions to enable successful ITER NBI operations in a time bound fashion.

physics.plasm-ph↗

arXiv2022

The Status and Future of Color Transparency and Nuclear Filtering

40 years after its introduction, the phenomenon of color transparency remains a domain of controversial interpretations of experimental data. We review present evidence for or against its manifestation in various exclusive hard scattering reactions. The nuclear transparency experiments reveal whether short distance processes dominate a scattering amplitude at some given kinematical point. We plead for a new round of nuclear transparency measurements in a variety of experimental set-ups, including near-forward exclusive reactions related to generalized parton distribution (GPD) physics and near-backward exclusive reactions related to transition distribution amplitudes (TDA) physics.

hep-ph↗

arXiv2020

Square Kilometre Array Science Data Challenge 1: analysis and results

As the largest radio telescope in the world, the Square Kilometre Array (SKA) will lead the next generation of radio astronomy. The feats of engineering required to construct the telescope array will be matched only by the techniques developed to exploit the rich scientific value of the data. To drive forward the development of efficient and accurate analysis methods, we are designing a series of data challenges that will provide the scientific community with high-quality datasets for testing and evaluating new techniques. In this paper we present a description and results from the first such Science Data Challenge (SDC1). Based on SKA MID continuum simulated observations and covering three frequencies (560 MHz, 1400MHz and 9200 MHz) at three depths (8 h, 100 h and 1000 h), SDC1 asked participants to apply source detection, characterization and classification methods to simulated data. The challenge opened in November 2018, with nine teams submitting results by the deadline of April 2019. In this work we analyse the results for 8 of those teams, showcasing the variety of approaches that can be successfully used to find, characterise and classify sources in a deep, crowded field. The results also demonstrate the importance of building domain knowledge and expertise on this kind of analysis to obtain the best performance. As high-resolution observations begin revealing the true complexity of the sky, one of the outstanding challenges emerging from this analysis is the ability to deal with highly resolved and complex sources as effectively as the unresolved source population.

astro-ph.IM↗

arXiv2020

Energy sensitivity of the GRAPES-3 EAS array for primary cosmic ray protons

Low energy ground-based cosmic ray air shower experiments generally have energy threshold in the range of a few tens to a few hundreds of TeV. The shower observables are measured indirectly with an array of detectors. The atmospheric absorption of low energy secondaries limits their detection frequencies at the Earth's surface. However, due to selection effects, a tiny fraction of low energy showers, which are produced in the lower atmosphere can reach the observational level. But, due to less information of shower observables, the reconstruction of these showers are arduous. Hence, it is believed that direct measurements by experiments aboard on satellites and balloon flights are more reliable at low energies. Despite having very small efficiency ($\sim$0.1%) at low energies, the large acceptance ($\sim$5 m$^2$sr) of GRAPES-3 experiment allows observing primary cosmic rays down below to $\sim$1 TeV and opens up the possibility to measure primary energy spectrum spanning from a few TeV to beyond cosmic ray knee (up to 10$^{16}$ eV), covering five orders of magnitude. The GRAPES-3 energy threshold for primary protons through Monte Carlo simulations are calculated, which gives reasonably good agreement with data. Furthermore, the total efficiencies and acceptance are also calculated for protons primaries. The ability of GRAPES-3 experiment to cover such a broader energy range may provide a unique handle to bridge the energy spectrum between direct measurements at low energies and indirect measurements at ultra-high energies.

astro-ph.IM↗

arXiv2019

The angular resolution of GRAPES-3 EAS array after correction for the shower front curvature

The angular resolution of an extensive air shower (EAS) array plays a critical role in determining its sensitivity for the detection of point $\gamma$-ray sources in the multi-TeV energy range. The GRAPES-3 an EAS array located at Ooty in India (11.4$^{\circ}$N, 76.7$^{\circ}$E, 2200 m altitude) is designed to study $\gamma$-rays in the TeV-PeV energy range. It comprises of a dense array of 400 plastic scintillators deployed over an area of 25000 m$^2$ and a large area (560 m$^2$) muon telescope. A new statistical method allowed real time determination of the propagation delay of each detector in the GRAPES-3 array. The shape of shower front is known to be curved and here the details of a new method developed for accurate measurement of the shower front curvature is presented. These two developments have led to a sizable improvement in the angular resolution of GRAPES-3 array. It is shown that the curvature depends on the size and age of an EAS. By employing two different techniques, namely, the odd-even and the left-right methods, independent estimates of the angular resolution are obtained. The odd-even method estimates the best achievable resolution of the array. For obtaining the angular resolution, the left-right method is used after implementing the size and age dependent curvature corrections. A comparison of the angular resolution as a function of EAS energy by these two methods shows them be virtually indistinguishable. The angular resolution of GRAPES-3 array is 47$^{\prime}$ for energies E$>$5 TeV and improves to 17$^{\prime}$ at E$>$100 TeV and finally approaching 10$^{\prime}$ at E$>$500 TeV.

astro-ph.IM↗

arXiv2018

Torsion driven Inflationary Magnetogenesis

We show that breaking of the conformal invariance of electromagnetic Lagrangian which is required for inflationary magnetogenesis arises naturally in the Poincar{\'e} Gauge Theory. We use the minimal coupling prescription to introduce the electromagnetic gauge fields as well as non-abelian gauge fields in this theory. Due to the addition of non-abelian gauge fields, we show that the solar constraints on this model can be naturally evaded. We find that in the minimal version of this model the generated magnetic field is too small to explain the observations. We discuss some generalizations of the gravitational action, including the Starobinsky model and a model with conformal invariance. We show that such generalizations naturally generate the kinetic energy terms required for magnetogenesis. We propose a generalization of the minimal model by adding a potential term, which is allowed within the framework of this model, and show that it leads to sufficiently large magnetic fields.

astro-ph.CO↗

arXiv2018

Antarctic Surface Reflectivity Calculations and Measurements from the ANITA-4 and HiCal-2 Experiments

The balloon-borne HiCal radio-frequency (RF) transmitter, in concert with the ANITA radio-frequency receiver array, is designed to measure the Antarctic surface reflectivity in the RF wavelength regime. The amplitude of surface-reflected transmissions from HiCal, registered as triggered events by ANITA, can be compared with the direct transmissions preceding them by O(10) microseconds, to infer the surface power reflection coefficient $\cal{R}$. The first HiCal mission (HiCal-1, Jan. 2015) yielded a sample of 100 such pairs, resulting in estimates of $\cal{R}$ at highly-glancing angles (i.e., zenith angles approaching $90^\circ$), with measured reflectivity for those events which exceeded extant calculations. The HiCal-2 experiment, flying from Dec., 2016-Jan., 2017, provided an improvement by nearly two orders of magnitude in our event statistics, allowing a considerably more precise mapping of the reflectivity over a wider range of incidence angles. We find general agreement between the HiCal-2 reflectivity results and those obtained with the earlier HiCal-1 mission, as well as estimates from Solar reflections in the radio-frequency regime. In parallel, our calculations of expected reflectivity have matured; herein, we use a plane-wave expansion to estimate the reflectivity R from both a flat, smooth surface (and, in so doing, recover the Fresnel reflectivity equations) and also a curved surface. Multiplying our flat-smooth reflectivity by improved Earth curvature and surface roughness corrections now provides significantly better agreement between theory and the HiCal 2a/2b measurements.

astro-ph.IM↗

arXiv2017

Antarctic Surface Reflectivity Measurements from the ANITA-3 and HiCal-1 Experiments

The primary science goal of the NASA-sponsored ANITA project is measurement of ultra-high energy neutrinos and cosmic rays, observed via radio-frequency signals resulting from a neutrino- or cosmic ray- interaction with terrestrial matter (atmospheric or ice molecules, e.g.). Accurate inference of the energies of these cosmic rays requires understanding the transmission/reflection of radio wave signals across the ice-air boundary. Satellite-based measurements of Antarctic surface reflectivity, using a co-located transmitter and receiver, have been performed more-or-less continuously for the last few decades. Satellite-based reflectivity surveys, at frequencies ranging from 2--45 GHz and at near-normal incidence, yield generally consistent reflectivity maps across Antarctica. Using the Sun as an RF source, and the ANITA-3 balloon borne radio-frequency antenna array as the RF receiver, we have also measured the surface reflectivity over the interval 200-1000 MHz, at elevation angles of 12-30 degrees, finding agreement with the Fresnel equations within systematic errors. To probe low incidence angles, inaccessible to the Antarctic Solar technique and not probed by previous satellite surveys, a novel experimental approach ("HiCal-1") was devised. Unlike previous measurements, HiCal-ANITA constitute a bi-static transmitter-receiver pair separated by hundreds of kilometers. Data taken with HiCal, between 200--600 MHz shows a significant departure from the Fresnel equations, constant with frequency over that band, with the deficit increasing with obliquity of incidence, which we attribute to the combined effects of possible surface roughness, surface grain effects, radar clutter and/or shadowing of the reflection zone due to Earth curvature effects.

astro-ph.IM↗

arXiv2015

Effect of VSR invariant Chern-Simon Lagrangian on photon polarization

We propose a generalization of the Chern-Simon (CS) Lagrangian which is invariant under the SIM(2) transformations but not under the full Lorentz group. We study the effect of such a term on radiation propagating over cosmological distances. We find that the dominant effect of this term is to produce circular polarization as radiation propagates through space. We use the circular polarization data from distant radio sources in order to impose a limit on this term.

hep-ph↗

arXiv2014

Synthetic magnetoelectric coupling in a nanocomposite multiferroic

Given the paucity of single phase multiferroic materials (with large ferromagnetic moment), composite systems seem an attractive solution in the quest to realize magnetoelectric cou-pling between ferromagnetic and ferroelectric order parameters. Despite having antiferro-magnetic order, BiFeO3 (BFO) has nevertheless been a key material in this quest due to excel-lent ferroelectric properties at room temperature. We studied a superlattice composed of 8 repetitions of 6 unit cells of La0.7Sr0.3MnO3 (LSMO) grown on 5 unit cells of BFO. Significant net uncompensated magnetization in BFO is demonstrated using polarized neutron reflectometry in an insulating superlattice. Remarkably, the magnetization enables magnetic field to change the dielectric properties of the superlattice, which we cite as an example of synthetic magnetoelectric coupling. Importantly, this controlled creation of magnetic moment in BFO suggests a much needed path forward for the design and implementation of integrated oxide devices for next generation magnetoelectric data storage platforms.

cond-mat.mes-hall↗

arXiv2012

Supersolid Vortex Crystals in Rydberg-dressed Bose-Einstein Condensates

We study rotating quasi-two-dimensional Bose-Einstein-condensates, in which atoms are dressed to a highly excited Rydberg state. This leads to weak effective interactions that induce a transition to a mesoscopic supersolid state. Considering slow rotation, we determine its superfluidity using Quantum Monte-Carlo simulations as well as mean field calculations. For rapid rotation, the latter reveal an interesting competition between the supersolid crystal structure and the rotation-induced vortex lattice that gives rise to new phases, including arrays of mesoscopic vortex crystals.

physics.atom-ph↗

arXiv2010

A superfluid-droplet crystal and a free-space supersolid in a dipole-blockaded gas

A novel supersolid phase is predicted for an ensemble of Rydberg atoms in the dipole-blockade regime, interacting via a repulsive dipolar potential "softened" at short distances. Using exact numerical techniques, we study the low temperature phase diagram of this system, and observe an intriguing phase consisting of a crystal of mesoscopic superfluid droplets. At low temperature, phase coherence throughout the whole system, and the ensuing bulk superfluidity, are established through tunnelling of identical particles between neighbouring droplets.

cond-mat.quant-gas↗

arXiv2010

Muon spin relaxation investigation of magnetic ordering in the hybrid organic-inorganic perovskites [(CH3)2NH2]M(HCOO)3, M = Ni,Co,Mn,Cu

Muon spin relaxation measurements are reported on samples of dimethylammonium metal formates containing magnetic divalent nickel, cobalt, manganese, and copper ions. These hybrid organic-inorganic perovskites exhibit weak ferromagnetism and are, apart from the copper system, multiferroics with well separated magnetic and antiferroelectric transitions. We use muons to follow the sublattice magnetization, observing the effect of the spin reorientation transitions below TN and the criticality approaching TN. The multiferroic samples have three-dimensional antiferromagnetic interactions, but the copper sample shows quasi-one-dimensional behavior due to its Jahn-Teller distorted structure, with a ratio of its inter- and intrachain exchange constants j/J=0.037.

cond-mat.str-el↗

arXiv2007

The Quantum de Laval Nozzle: stability and quantum dynamics of sonic horizons in a toroidally trapped Bose gas containing a superflow

We study an experimentally realizable system containing stable black hole-white hole acoustic horizons in toroidally trapped Bose-Einstein condensates - the quantum de Laval nozzle. We numerically obtain stationary flow configurations and assess their stability using Bogoliubov theory, finding both in hydrodynamic and non-hydrodynamic regimes there exist dynamically unstable regions associated with the creation of positive and negative energy quasiparticle pairs in analogy with the gravitational Hawking effect. The dynamical instability takes the form of a two mode squeezing interaction between resonant pairs of Bogoliubov modes. We study the evolution of dynamically unstable flows using the truncated Wigner method, which confirms the two mode squeezed state picture of the analogue Hawking effect for low winding number.

cond-mat.other↗

arXiv2006

A re-analysis of the three-year WMAP temperature power spectrum and likelihood

We analyze the three-year WMAP temperature anisotropy data seeking to confirm the power spectrum and likelihoods published by the WMAP team. We apply five independent implementations of four algorithms to the power spectrum estimation and two implementations to the parameter estimation. Our single most important result is that we broadly confirm the WMAP power spectrum and analysis. Still, we do find two small but potentially important discrepancies: On large angular scales there is a small power excess in the WMAP spectrum (5-10% at l<~30) primarily due to likelihood approximation issues between 13 <= l <~30. On small angular scales there is a systematic difference between the V- and W-band spectra (few percent at l>~300). Recently, the latter discrepancy was explained by Huffenberger et al. (2006) in terms of over-subtraction of unresolved point sources. As far as the low-l bias is concerned, most parameters are affected by a few tenths of a sigma. The most important effect is seen in n_s. For the combination of WMAP, Acbar and BOOMERanG, the significance of n_s =/ 1 drops from ~2.7 sigma to ~2.3 sigma when correcting for this bias. We propose a few simple improvements to the low-l WMAP likelihood code, and introduce two important extensions to the Gibbs sampling method that allows for proper sampling of the low signal-to-noise regime. Finally, we make the products from the Gibbs sampling analysis publically available, thereby providing a fast and simple route to the exact likelihood without the need of expensive matrix inversions.

astro-ph↗