arXiv subjects
Publications and source records attributed to P. Meystre.
We propose and analyze theoretically a cavity optomechanical analog of a heat pump that uses a polariton fluid to cool mechanical modes coupled to a single pre-cooled phonon mode via external modulation of the substrate of the mechanical resonator. This approach permits to cool phonon modes of arbitrary frequencies not limited by the cavity-optical field detuning deep into the quantum regime from room temperature.
We analyze a quantum force sensor that uses coherent quantum noise cancellation (CQNC) to beat the Standard Quantum Limit (SQL). This sensor, which allows for the continuous, broad-band detection of feeble forces, is a hybrid dual-cavity system comprised of a mesoscopic mechanical resonator optically coupled to an ensemble of ultracold atoms. In contrast to the stringent constraints on dissipation typically associated with purely optical schemes of CQNC, the dissipation rate of the mechanical resonator only needs to be matched to the decoherence rate of the atomic ensemble -- a condition that is experimentally achievable even for the technologically relevant regime of low frequency mechanical resonators with large quality factors. The modular nature of the system further allows the atomic ensemble to aid in the cooling of the mechanical resonator, thereby combining atom-mediated state preparation with sensing deep in the quantum regime.
Quantum optomechanics offers the potential to investigate quantum effects in macroscopic quantum systems in extremely well controlled experiments. In this paper we discuss one such situation, the dynamic stabilization of a mechanical system such as an inverted pendulum. The specific example that we study is a "membrane in the middle" mechanical oscillator coupled to a cavity field via a quadratic optomechanical interaction, with cavity damping the dominant source of dissipation. We show that the mechanical oscillator can be dynamically stabilized by a temporal modulation of the radiation pressure force. We investigate the system both in the classical and quantum regimes highlighting similarities and differences.
We investigate a hybrid quantum system consisting of a cavity optomechanical device optically coupled to an ultracold quantum gas. We show that the dispersive properties of the ultracold gas can be used to dramatically modify the optomechanical response of the mechanical resonator. We examine hybrid schemes wherein the mechanical resonator is coupled either to the motional or the spin degrees of freedom of the ultracold gas. In either case, we find an enhancement of more than two orders of magnitude in optomechanical cooling due to this hybrid interaction. Significantly, based on demonstrated parameters for the cavity optomechanical device, we identify regimes that enable the ground state cooling of the resonator from room temperature. In addition, the hybrid system considered here represents a powerful interface for the use of an ultracold quantum gas for state preparation, sensing and quantum manipulation of a mesoscopic mechanical resonator.
During the theoretical investigation of the ultimate sensitivity of gravitational wave detectors through the 1970's and '80's, it was debated whether quantum fluctuations of the light field used for detection, also known as photon shot noise, would ultimately produce a force noise which would disturb the detector and limit the sensitivity. Carlton Caves famously answered this question with "They do." With this understanding came ideas how to avoid this limitation by giving up complete knowledge of the detector's motion. In these back-action evading (BAE) or quantum non-demolition (QND) schemes, one manipulates the required quantum measurement back-action by placing it into a component of the motion which is unobserved and dynamically isolated. Using a superconducting, electro-mechanical device, we realize a sensitive measurement of a single motional quadrature with imprecision below the zero-point fluctuations of motion, detect both the classical and quantum measurement back-action, and demonstrate BAE avoiding the quantum back-action from the microwave photons by 9 dB. Further improvements of these techniques are expected to provide a practical route to manipulate and prepare a squeezed state of motion with mechanical fluctuations below the quantum zero-point level, which is of interest both fundamentally and for the detection of very weak forces.
We investigate a hybrid electro-mechanical system consisting of a pair of charged macroscopic mechanical oscillators coupled to a small ensemble of Rydberg atoms. The resonant dipole-dipole coupling between an internal atomic Rydberg transition and the mechanics allows cooling to its motional ground state with a single atom despite the considerable mass imbalance between the two subsystems. We show that the rich electronic spectrum of Rydberg atoms, combined with their high degree of optical control, paves the way towards implementing various quantum-control protocol for the mechanical oscillators.
We study theoretically the dynamics of multiple mechanical oscillators coupled to a single cavity field mode via linear or quadratic optomechanical interactions. We focus specifically on the strong coupling regime where the cavity decays much faster than the mechanical modes, and the optomechanical coupling is comparable to or larger than the mechanical frequency, so that both the optical and mechanical systems operate in the deep quantum regime. Using the examples of one and two mechanical oscillators we show that the system can classically exhibit bistability and bifurcations, and we explore how these manifest themselves in interference, entanglement, and correlation in the quantum theory, while revealing the impact of decoherence of the mechanical system due to cavity fluctuations and coherent driving.
We analyze the phase conjugate coupling of a pair of optomechanical oscillator modes driven by the time-dependent beat-note due to a two-color optical field. The dynamics of the direct and phase conjugate modes exhibit familiar time-reversed qualities, leading to opposite sign temperatures for the modes in the classical regime of operation, but these features are limited by quantum effects due to the non-commutative nature of quantum mechanical operators. The effects are measurable by read-out of the oscillator via a qubit. As a potential application of this system in sensing, we discuss a protocol applying phase-conjugate swaps to cancel external forces acting on the system.
The possibility to coherently control a quantum rotor is investigated theoretically. The rotor is realized by an antiferromagnetic spin-1 Bose-Einstein condensate, trapped in the optical field of a Fabry-Perot resonator. By tuning the pumping field of the resonator, coherent control over the rotor is achieved. The technique is illustrated by the numerical simulation of a protocol that transforms the rotor's ground state into a squeezed state. The detection of the squeezed state via measurement of intensity-correlations of the cavity field is proposed.
We propose a scheme to prepare macroscopic quantum superpositions of motion in optomachanical nano- or micromechanical oscillators quadratically coupled to an intracavity field. The nonlinear optomechanical coupling leads to an effective degenerate three-wave mixing interaction between the mechanical and cavity modes. The quantum superpositions result from the combined effects of the interaction and cavity dissipation. We show analytically and confirm numerically that various deterministic quantum superpositions can be achieved, depending on initial mechanical state. The effect of mechanical damping is also studied in detail via the negativity of the Wigner function. The present scheme can be realized in various optomechanical systems with current technology.
In this paper, we propose two quantum optomechanical arrangements that permit the dissipation-enabled generation of steady two-mode mechanical squeezed states. In the first setup, the mechanical oscillators are placed in a two-mode optical resonator while in the second setup the mechanical oscillators are located in two coupled single-mode cavities. We show analytically that for an appropriate choice of the pump parameters, the two mechanical oscillators can be driven by cavity dissipation into a stationary two-mode squeezed vacuum, provided that mechanical damping is negligible. The effect of thermal fluctuations is also investigated in detail and show that ground state pre-cooling of the oscillators in not necessary for the two-mode squeezing. These proposals can be realized in a number of optomechanical systems with current state-of-the-art experimental techniques.
We provide a theoretical treatment of the quantum backaction of Larmor frequency measurements on a spinor Bose-Einstein condensate by an off-resonant light field. Two main results are presented; the first is a "quantum jump" operator description that reflects the abrupt change in the spin state of the atoms when a single photon is counted at a photodiode. The second is the derivation of a conditional stochastic master equation relating the evolution of the condensate density matrix to the measurement record. We comment on applications of this formalism to metrology and many-body studies.
This paper gives an brief review of the basic physics of quantum optomechanics and provides an overview of some of its recent developments and current areas of focus. It first outlines the basic theory of cavity optomechanical cooling and gives a brief status report of the experimental state-of-the-art. It then turns to the deep quantum regime of operation of optomechanical oscillators and cover selected aspects of quantum state preparation, control and characterization, including mechanical squeezing and pulsed optomechanics. This is followed by a discussion of the "bottom-up" approach that exploits ultracold atomic samples instead of nanoscale systems. It concludes with an outlook that concentrates largely on the functionalization of quantum optomechanical systems and their promise in metrology applications.
We consider theoretically the optomechanical interaction of several mechanical modes with a single quantized cavity field mode for linear and quadratic coupling. We focus specifically on situations where the optical dissipation is the dominant source of damping, in which case the optical field can be adiabatically eliminated, resulting in effective multimode interactions between the mechanical modes. In the case of linear coupling, the coherent contribution to the interaction can be exploited e.g. in quantum state swapping protocols, while the incoherent part leads to significant modifications of cold damping or amplification from the single-mode situation. Quadratic coupling can result in a wealth of possible effective interactions including the analogs of second-harmonic generation and four-wave mixing in nonlinear optics, with specific forms depending sensitively on the sign of the coupling. The cavity-mediated mechanical interaction of two modes is investigated in two limiting cases, the resolved sideband and the Doppler regime. As an illustrative application of the formal analysis we discuss in some detail a two-mode system where a Bose-Einstein condensate is optomechanically linearly coupled to the moving end mirror of a Fabry-Pérot cavity.
The macroscopic tunneling of an optomechanical membrane is considered. A cavity mode which couples quadratically to the membranes position can create highly tunable adiabatic double-well potentials, which together with the high Q-factors of such membranes render the observation of macroscopic tunneling possible. A suitable, pulsed measurement scheme using a linearly coupled mode of the cavity for the verification of the effect is studied.
In this paper we describe a scheme for state transfer between a trapped atomic Bose condensate and an optomechanical end-mirror mediated by a cavity field. Coupling between the mirror and the cold gas arises from the fact that the cavity field can produce density oscillations in the gas which in turn acts as an internal Bragg mirror for the field. After adiabatic elimination of the cavity field we find that the hybrid system of the gas and mirror is described by a beam splitter Hamiltonian that allows for state transfer, but only if the quantum nature of the cavity field is retained.
A scheme to squeeze the center-of-mass motional quadratures of a quantum mechanical oscillator below its standard quantum limit is proposed and analyzed theoretically. It relies on the dipole-dipole coupling between a magnetic dipole mounted on the tip of a cantilever to equally oriented dipoles located on a mesoscopic tuning fork. We also investigate the influence of several sources of noise on the achievable squeezing, including classical noise in the driving fork and the clamping noise in the oscillator. A detection of the state of the cantilever based on state transfer to a light field is considered. We investigate possible limitations of that scheme.
We study theoretically the dynamics of a a hybrid optomechanical system consisting of a macroscopic mechanical membrane magnetically coupled to a spinor Bose-Einstein condensate via a nanomagnet attached at the membrane center. We demonstrate that this coupling permits us to monitor indirectly the center-of-mass position of the membrane via measurements of the spin of the condensed atoms. These measurements normally induce a significant backaction on the membrane motion, which we quantify for the cases of thermal and coherent initial states of the membrane. We discuss the possibility of measuring that quantum backaction via repeated measurements. We also investigate the potential to generate non-classical states of the membrane, in particular Schrodinger cat states, via such repeated measurements.