arXiv subjects

P. Navarro

Publications and source records attributed to P. Navarro.

17 recordsLinked to original sources

arXiv2025

Search for solar axions produced through the axion-electron coupling $g_{ae}$ using a new GridPix detector at CAST

We present a search for solar axions produced through the axion-electron coupling $(g_{ae})$ using data from a novel 7-GridPix detector installed at the CERN Axion Solar Telescope (CAST). The detector, featuring ultra-thin silicon nitride windows and multiple veto systems, collected approximately 160 hours of solar tracking data between 2017-2018. Using machine learning techniques and the veto systems, we achieved a background rate of $1.06\times 10^{-5}\,\text{keV}^{-1}\text{cm}^{-2}\text{s}^{-1}$ at a signal efficiency of about $80\,\%$ in the $0.2$-$8\,\text{keV}$ range. Analysis of the data yielded no significant excess above background, allowing us to set a new upper limit on the product of the axion-electron and axion-photon couplings of $g_{ae}\cdot g_{a\gamma} < 7.35\times 10^{-23}\,\text{GeV}^{-1}$ at $95\,\%$ confidence level. This result improves upon the previous best helioscope limit and demonstrates the potential of GridPix technology for rare event searches. Additionally, we derived a limit on the axion-photon coupling of $g_{a\gamma} < 9.0\times 10^{-11}\,\text{GeV}^{-1}$ at $95\,\%$ CL, which, while not surpassing CAST's best limit, provides complementary constraints on axion models.

hep-ex↗

arXiv2024

A new upper limit on the axion-photon coupling with an extended CAST run with a Xe-based Micromegas detector

Hypothetical axions provide a compelling explanation for dark matter and could be emitted from the hot solar interior. The CERN Axion Solar Telescope (CAST) has been searching for solar axions via their back conversion to X-ray photons in a 9-T 10-m long magnet directed towards the Sun. We report on an extended run with the IAXO (International Axion Observatory) pathfinder detector, doubling the previous exposure time. The detector was operated with a xenon-based gas mixture for part of the new run, providing technical insights for future detector configurations in IAXO. No counts are detected in the 95% signal-encircling region during the new run, while 0.75 are expected. The new data improve the axion-photon coupling limit to 5.8$\times 10^{-11}\,$GeV$^{-1}$ at 95% C.L. (for $m_a \lesssim 0.02$ eV), the most restrictive experimental limit to date.

hep-ex↗

arXiv2024

RADES axion search results with a High-Temperature Superconducting cavity in an 11.7 T magnet

We describe the results of a haloscope axion search performed with an 11.7 T dipole magnet at CERN. The search used a custom-made radio-frequency cavity coated with high-temperature superconducting tape. A set of 27 h of data at a resonant frequency of around 8.84 GHz was analysed. In the range of axion mass 36.5676 $\mu$eV to 36.5699 $\mu$eV, corresponding to a width of 554 kHz, no signal excess hinting at an axion-like particle was found. Correspondingly, in this mass range, a limit on the axion to photon coupling-strength was set in the range between g$_{a\gamma}\gtrsim$ 6.2e-13 GeV$^{-1}$ and g$_{a\gamma}\gtrsim$ 1.59e-13 GeV$^{-1}$ with a 95% confidence level.

hep-ex↗

arXiv2023

A proposal for a low-frequency axion search in the 1-2 $\mu$eV range and below with the BabyIAXO magnet

In the near future BabyIAXO will be the most powerful axion helioscope, relying on a custom-made magnet of two bores of 70 cm diameter and 10 m long, with a total available magnetic volume of more than 7 m$^3$. In this document, we propose and describe the implementation of low-frequency axion haloscope setups suitable for operation inside the BabyIAXO magnet. The RADES proposal has a potential sensitivity to the axion-photon coupling $g_{a\gamma}$ down to values corresponding to the KSVZ model, in the (currently unexplored) mass range between 1 and 2$~\mu$eV, after a total effective exposure of 440 days. This mass range is covered by the use of four differently dimensioned 5-meter-long cavities, equipped with a tuning mechanism based on inner turning plates. A setup like the one proposed would also allow an exploration of the same mass range for hidden photons coupled to photons. An additional complementary apparatus is proposed using LC circuits and exploring the low energy range ($\sim10^{-4}-10^{-1}~\mu$eV). The setup includes a cryostat and cooling system to cool down the BabyIAXO bore down to about 5 K, as well as appropriate low-noise signal amplification and detection chain.

physics.ins-det↗

arXiv2023

Methods and restrictions to increase the volume of resonant rectangular-section haloscopes for detecting dark matter axions

Haloscopes are resonant cavities that serve as detectors of dark matter axions when they are immersed in a strong static magnetic field. In order to increase the volume and improve its introduction within dipole or solenoid magnets for axion searches, various haloscope design techniques for rectangular geometries are discussed in this study. The volume limits of two types of haloscopes are explored: based on single cavities and based on multicavities. For both cases, possibilities for increasing the volume in long and/or tall structures are presented. For multicavities, 1D geometries are explored to optimize the space in the magnets. Also, 2D and 3D geometries are introduced as a first step for laying the foundations for the development of these kind of topologies. The results prove the usefulness of the developed methods, evidencing the ample room of improvement in rectangular haloscope designs nowadays. A factor of three orders of magnitude improvement in volume compared with a single cavity based on WR-90 standard waveguide is obtained with the design of a long and tall single cavity. Similar procedures have been applied for long and tall multicavities. Experimental measurements are shown for prototypes based on tall multicavities and 2D structures, demonstrating the feasibility of using these types of geometries to increase the volume in real haloscopes.

physics.ins-det↗

arXiv2022

On the use of ferroelectric material in the detection of dark matter axions

Tuning is an essential requirement for the search of dark matter axions employing haloscopes since its mass is not known yet to the scientific community. At the present day, most haloscope tuning systems are based on mechanical devices which can lead to failures due to the complexity of the environment in which they are used. However, the electronic tuning making use of ferroelectric materials can provide a path that is less vulnerable to mechanical failures and thus complements and expands current tuning systems. In this work, we present and design a novel concept for using the ferroelectric Potassium Tantalate ($KTaO_3$ or KTO) material as a tuning element in haloscopes based on coupled microwave cavities. In this line, the structures used in the Relic Axion Detector Exploratory Setup (RADES) group are based on several cavities that are connected by metallic irises, which act as interresonator coupling elements. In this article, we also show how to use these $KTaO_3$ films as interresonator couplings between cavities, instead of inductive or capacitive metallic windows used in the past. These two concepts represent a crucial upgrade over the current systems employed in the dark matter axions community, achieving a tuning range of $2.23 \, \%$ which represents a major improvement as compared to previous works ($<0.1 \, \%$) for the same class of tuning systems. The theoretical and simulated results shown in this work demonstrate the interest of the novel concepts proposed for the incorporation of this kind of ferroelectric media in multicavity resonant haloscopes in the search for dark matter axions.

physics.ins-det↗

arXiv2021

Design of new resonant haloscopes in the search for the darkmatter axion: a review of the first steps in the RADES collaboration

Within the increasing interest in the dark matter axion detection through haloscopes, in which different international groups are currently involved, the RADES group was established in 2016 with the goal of developing very sensitive detection systems to be operated in dipole magnets. This review deals with the work developed by this collaboration during its first five years, from the first designs, based on the multi-cavity concept, aiming to increase the haloscope volume and, so, to improve its sensitivity, their evolution, the data acquisition design, and, finally, the first experimental run. Moreover, the envisaged work within RADES, for both dipole and solenoid magnets, in the short and medium term is also presented.

physics.ins-det↗

arXiv2021

Thin Film (High Temperature) Superconducting Radiofrequency Cavities for the Search of Axion Dark Matter

The axion is a hypothetical particle which is a candidate for cold dark matter. Haloscope experiments directly search for these particles in strong magnetic fields with RF cavities as detectors. The Relic Axion Detector Exploratory Setup (RADES) at CERN in particular is searching for axion dark matter in a mass range above 30 $\mu$eV. The figure of merit of our detector depends linearly on the quality factor of the cavity and therefore we are researching the possibility of coating our cavities with different superconducting materials to increase the quality factor. Since the experiment operates in strong magnetic fields of 11 T and more, superconductors with high critical magnetic fields are necessary. Suitable materials for this application are for example REBa$_2$Cu$_3$O$_{7-x}$, Nb$_3$Sn or NbN. We designed a microwave cavity which resonates at around 9~GHz, with a geometry optimized to facilitate superconducting coating and designed to fit in the bore of available high-field accelerator magnets at CERN. Several prototypes of this cavity were coated with different superconducting materials, employing different coating techniques. These prototypes were characterized in strong magnetic fields at 4.2 K.

hep-ex↗

arXiv2021

Wide-band full-wave electromagnetic modal analysis of the coupling between dark-matter axions and photons in microwave resonators

The electromagnetic coupling axion-photon in a microwave cavity is revisited with the Boundary Integral - Resonant Mode Expansion (BI-RME) 3D technique. Such full-wave modal technique has been applied for the rigorous analysis of the excitation of a microwave cavity with an axion field. In this scenario, the electromagnetic field generated by the axion-photon coupling can be assumed to be driven by equivalent electrical charge and current densities. These densities have been inserted in the general BI-RME 3D equations, which express the RF electromagnetic field existing within a cavity as an integral involving the Dyadic Green functions of the cavity (under Coulomb gauge) as well as such densities. This method is able to take into account any arbitrary spatial and temporal variation of both magnitude and phase of the axion field. Next, we have obtained a simple network driven by the axion current source, which represents the coupling between the axion field and the resonant modes of the cavity. With this approach, it is possible to calculate the extracted and dissipated RF power as a function of frequency along a broad band and without Cauchy-Lorentz approximations, obtaining the spectrum of the electromagnetic field generated in the cavity, and dealing with modes relatively close to the axion resonant mode. Moreover, with this technique we have a complete knowledge of the signal extracted from the cavity, not only in magnitude but also in phase. This can be an interesting issue for future analysis where the axion phase is an important parameter.

hep-ex↗

arXiv2021

First results of the CAST-RADES haloscope search for axions at 34.67 $\mu$eV

We present results of the Relic Axion Dark-Matter Exploratory Setup (RADES), a detector which is part of the CERN Axion Solar Telescope (CAST), searching for axion dark matter in the 34.67$\mu$eV mass range. A radio frequency cavity consisting of 5 sub-cavities coupled by inductive irises took physics data inside the CAST dipole magnet for the first time using this filter-like haloscope geometry. An exclusion limit with a 95% credibility level on the axion-photon coupling constant of g$_{a\gamma}\gtrsim 4\times10^{-13} \text{GeV}^{-1}$ over a mass range of 34.6738 $\mu$eV < $m_a$ < 34.6771 $\mu$eV is set. This constitutes a significant improvement over the current strongest limit set by CAST at this mass and is at the same time one of the most sensitive direct searches for an axion dark matter candidate above the mass of 25 $\mu$eV. The results also demonstrate the feasibility of exploring a wider mass range around the value probed by CAST-RADES in this work using similar coherent resonant cavities.

hep-ex↗

arXiv2020

Scalable haloscopes for axion dark matter detection in the 30$\mu$eV range with RADES

RADES (Relic Axion Detector Exploratory Setup) is a project with the goal of directly searching for axion dark matter above the $30 \mu$eV scale employing custom-made microwave filters in magnetic dipole fields. Currently RADES is taking data at the LHC dipole of the CAST experiment. In the long term, the RADES cavities are envisioned to take data in the (baby)-IAXO magnet. In this article we report on the modelling, building and characterisation of an optimised microwave-filter design with alternating irises that exploits maximal coupling to axions while being scalable in length without suffering from mode-mixing. We develop the mathematical formalism and theoretical study which justifies the performance of the chosen design. We also point towards the applicability of this formalism to optimise the MADMAX dielectric haloscopes.

hep-ex↗

arXiv2019

The 3 cavity prototypes of RADES, an axion detector using microwave filters at CAST

The Relic Axion Detector Experimental Setup (RADES) is an axion search project that uses a microwave filter as resonator for Dark Matter conversion. The main focus of this publication is the description of the 3 different cavity prototypes of RADES. The result of the first tests of one of the prototypes is also presented. The filters consist of 5 or 6 stainless steel sub-cavities joined by rectangular irises. The size of the sub-cavities determines the working frequency, the amount of sub-cavities determine the working volume. The first cavity prototype was built in 2017 to work at a frequency of $\sim$ 8.4 GHz and it was placed at the 9 T CAST dipole magnet at CERN. Two more prototypes were designed and built in 2018. The aim of the new designs is to find and test the best cavity geometry in order to scale up in volume and to introduce an effective tuning mechanism. Our results demonstrate the promising potential of this type of filter to reach QCD axion sensitivity at X-Band frequencies.

physics.ins-det↗

arXiv2001

Kaluza-Klein theory, AdS/CFT correspondence and black hole entropy

The asymptotic symmetries of the near-horizon geometry of a lifted (near-extremal) Reissner-Nordstrom black hole, obtained by inverting the Kaluza-Klein reduction, explain the deviation of the Bekenstein-Hawking entropy from extremality. We point out the fact that the extra dimension allows us to justify the use of a Virasoro mode decomposition along the time-like boundary of the near-horizon geometry, AdS$_2\times$S$^n$, of the lower-dimensional (Reissner-Nordstrom) spacetime.

hep-th↗

arXiv1999

Integrable models, degenerate horizons and AdS_2 black holes

The near extremal Reissner-Nordstrom black holes in arbitrary dimensions ca be modeled by the Jackiw-Teitelboim (JT) theory. The asymptotic Virasoro symmetry of the corresponding JT model exactly reproduces, via Cardy's formula, the deviation of the Bekenstein-Hawking entropy of the Reissner-Nordstrom black holes from extremality. We also comment how can we extend this approach to investigate the evaporation process.

gr-qc↗

arXiv1999

AdS$_2$/CFT$_1$ correspondence and near-extremal black hole entropy

We provide a realization of the AdS$_2$/CFT$_1$ correspondence in terms of asymptotic symmetries of the AdS$_2\times$S$^1$ and AdS$_2\times$S$^2$ geometries arising in near-extremal BTZ and Reissner-Nordström black holes. Cardy's formula exactly accounts for the deviation of the Bekenstein-Hawking entropy from extremality. We also argue that this result can be extended to more general black holes near extremality.

hep-th↗

arXiv1999

Virasoro Orbits, AdS_3 Quantum Gravity and Entropy

We analyse the canonical structure of AdS_3 gravity in terms of the coadjoint orbits of the Virasoro group. There is one subset of orbits, associated to BTZ black hole solutions, that can be described by a pair of chiral free fields with a background charge. There is also a second subset of orbits, associated to point-particle solutions, that are described by two pairs of chiral free fields obeying a constraint. All these orbits admit Kähler quantization and generate a Hilbert space which, despite of having $Δ_0(\barΔ_0)=0$, does not provide the right degeneracy to account for the Bekenstein-Hawking entropy due to the breakdown of modular invariance. Therefore, additional degrees of freedom, reestablishing modular invariance, are necessarily required to properly account for the black hole entropy.

hep-th↗

arXiv1998

A Note on Einstein Gravity on AdS$_3$ and Boundary Conformal Field Theory

We find a simple relation between the first subleading terms in the asymptotic expansion of the metric field in AdS$_3$, obeying the Brown-Henneaux boundary conditions, and the stress tensor of the underlying Liouville theory on the boundary. We can also provide an more explicit relation between the bulk metric and the boundary conformal field theory when it is described in terms of a free field with a background charge.

hep-th↗