SearcharxivSearch

arXiv subjects

P. Troncoso

Publications and source records attributed to P. Troncoso.

8 recordsLinked to original sources

The ALMA Frontier Fields survey V: ALMA Stacking of Lyman-Break Galaxies in Abell 2744, Abell 370, Abell S1063, MACSJ0416.1-2403 and MACSJ1149.5+2223

The Hubble Frontier Fields offer an exceptionally deep window into the high-redshift universe, covering a substantially larger area than the Hubble Ultra-Deep field at low magnification and probing 1--2 mags deeper in exceptional high-magnification regions. We aim to leverage Atacama Large Millimetre Array (ALMA) band 6 ($\approx$263\,GHz) mosaics in the central portions of five Frontier Fields to characterize the infrared (IR) properties of $1582$ ultraviolet (UV)-selected Lyman-Break Galaxies (LBGs) at redshifts of $z {\sim}$2--8. We investigated individual and stacked fluxes and IR excess (IRX) values of the LBG sample as functions of stellar mass ($\mathrm{M}_{\bigstar}$), redshift, UV luminosity and slope $β$, and lensing magnification. Two (2) LBG candidates were individually detected above a significance of $4.1{-}σ$, while stacked samples of the remaining LBG candidates yielded no significant detections. We investigated our detections and upper limits in the context of the IRX-$\mathrm{M}_{\bigstar}$ and IRX-$β$ relations, probing at least one dex lower in stellar mass than past studies have done. Our upper limits exclude substantial portions of parameter space and they are sufficiently deep in a handful of cases to create mild tension with the typically assumed attenuation and consensus relations. We observe a clear and smooth trend between $\mathrm{M}_{\bigstar}$ and $β$, which extends to low masses and blue (low) $β$ values, consistent with expectations from previous works.

astro-ph.GA

The ALMA Frontier Fields Survey - IV. Lensing-corrected 1.1 mm number counts in Abell 2744, MACSJ0416.1-2403 and MACSJ1149.5+2223

[abridged] Characterizing the number counts of faint, dusty star-forming galaxies is currently a challenge even for deep, high-resolution observations in the FIR-to-mm regime. They are predicted to account for approximately half of the total extragalactic background light at those wavelengths. Searching for dusty star-forming galaxies behind massive galaxy clusters benefits from strong lensing, enhancing their measured emission while increasing spatial resolution. Derived number counts depend, however, on mass reconstruction models that properly constrain these clusters. We estimate the 1.1 mm number counts along the line of sight of three galaxy clusters, i.e. Abell 2744, MACSJ0416.1-2403 and MACSJ1149.5+2223, which are part of the ALMA Frontier Fields Survey. We perform detailed simulations to correct these counts for lensing effects. We use several publicly available lensing models for the galaxy clusters to derive the intrinsic flux densities of our sources. We perform Monte Carlo simulations of the number counts for a detailed treatment of the uncertainties in the magnifications and adopted source redshifts. We find an overall agreement among the number counts derived for the different lens models, despite their systematic variations regarding source magnifications and effective areas. Our number counts span ~2.5 dex in demagnified flux density, from several mJy down to tens of uJy. Our number counts are consistent with recent estimates from deep ALMA observations at a 3$σ$ level. Below $\approx$ 0.1 mJy, however, our cumulative counts are lower by $\approx$ 1 dex, suggesting a flattening in the number counts. In our deepest ALMA mosaic, we estimate number counts for intrinsic flux densities $\approx$ 4 times fainter than the rms level. This highlights the potential of probing the sub-10 uJy population in larger samples of galaxy cluster fields with deeper ALMA observations.

astro-ph.GA

The ALMA Frontier Fields Survey III: 1.1 mm Emission Line Identifications in Abell 2744, MACSJ0416.1-2403, MACSJ1149.5+2223, Abell 370, and Abell S1063

Most sub-mm emission line studies of galaxies to date have targeted sources with known redshifts where the frequencies of the lines are well constrained. Recent blind line scans circumvent the spectroscopic redshift requirement, which could represent a selection bias. Our aim is to detect emission lines present in continuum oriented observations. The detection of such lines provides spectroscopic redshift and yields properties of the galaxies. We perform a search for emission lines in the ALMA observations of five Frontier Fields clusters and assess the reliability of our detection by associating line candidates with detected galaxies in deep near-infrared imaging. We find 26 significant emission lines candidates, with observed line fluxes between 0.2-4.6 Jy km s$^{-1}$ and velocity dispersions (FWHM) of 25-600 km s$^{-1}$. Nine of these candidates lie nearby to near-infrared sources, boosting their reliability; in six cases the observed line frequency and strength are consistent with expectations given the photometric redshift and properties of the galaxy counterparts. We present redshift identifications, magnifications and molecular gas estimates for the galaxies with identified lines. We show that two of these candidates likely originate from starburst galaxies, one of which is a jellyfish galaxy, while another two are consistent with being main sequence galaxies based in their depletion times. This work highlights the degree to which serendipitous emission lines can be discovered in large mosaic continuum observations when deep ancillary data are available. The low number of high-significance line detections, however, confirms that such surveys are not as optimal as blind line scans. We stress that Monte Carlo simulations should be used to assess the line detections significances, since using the negative noise suffers from stochasticity and incurs larger uncertainties.

astro-ph.GA

The ALMA Frontier Fields survey I: 1.1 mm continuum detections in Abell 2744, MACSJ0416.1-2403 and MACSJ1149.5+2223

Dusty star-forming galaxies are among the most prodigious systems at high redshift (z>1), characterized by high star formation rates and huge dust reservoirs. The bright end of this population has been well characterized in recent years, but considerable uncertainties remain for fainter dusty star-forming galaxies, which are responsible for the bulk of star formation at high redshift and thus play a key role in galaxy growth and evolution. In this first paper of our series, we describe our methods for finding high redshift faint dusty galaxies using millimeter observations with ALMA. We obtained ALMA 1.1 mm mosaic images for three strong-lensing galaxy clusters from the Frontier Fields survey. The 2'x2' mosaics overlap with the deep HST WFC3/IR footprints and encompass the high magnification regions of each cluster. The combination of extremely high ALMA sensitivity and the magnification power of these clusters allows us to systematically probe the sub-mJy population of dusty star-forming galaxies over a large surveyed area. We present a description of the reduction and analysis of the ALMA continuum observations for the galaxy clusters Abell 2744 (z=0.308), MACSJ0416.1-2403 (z=0.396) and MACSJ1149.5+2223 (z=0.543), for which we reach observed rms sensitivities of 55, 59 and 71 $μ$Jy beam$^{-1}$ respectively. We detect 12 dusty star-forming galaxies at S/N>5.0 across the three clusters, all of them presenting coincidence with NIR detected counterparts in the HST images. None of the sources fall close to the lensing caustics, thus they are not strongly lensed. The observed 1.1 mm flux densities for the total sample of galaxies range from 0.41 to 2.82 mJy, with observed effective radii spanning <0.05" to 0.37"$\pm$0.21". The lensing-corrected sizes of the detected sources appear to be in the same range as those measured in brighter samples, albeit with possibly larger dispersion.

astro-ph.GA

Metallicity evolution, metallicity gradients and gas fractions at z~3.4

We used near-infrared integral field spectroscopic observations from the AMAZE and LSD programs to constrain the metallicity in a sample of 40 star forming galaxies at 3<z<5 (most of which at z~3.4). We measure metallicities by exploiting strong emission line diagnostics. We found that a significant fraction of star-forming galaxies at z~3.4 deviate from the Fundamental Metallicity Relation (FMR), with a metallicity up to a factor of ten lower than expected according to the FMR. This deviation does not correlate with the dynamical properties of the galaxy or with the presence of interactions. To investigate the origin of the metallicity deviations in more detail, we also infer information on the gas content, by inverting the Schmidt-Kennicutt relation. In agreement with recent CO observational data, we found that, in contrast with the steeply rising trend at 0<z<2, the gas fraction in massive galaxies remains constant, with indication of a marginal decline, at 2<z<3.5. When combined with the metallicity information, we infer that to explain both the low metallicity and gas content in z~3.4 galaxies, both prominent outflows and massive pristine gas inflows are needed. In ten galaxies we can also spatially resolve the metallicity distribution. We found that the metallicity generally anticorrelates with the distribution of star formation and with the gas surface density. We discuss these findings in terms of pristine gas inflows towards the center, and outflows of metal rich gas from the center toward the external regions. (Abridged)

astro-ph.CO

Constraints on the star-formation rate of z~3 LBGs with measured metallicity in the CANDELS GOODS-South field

We analyse 14 LBGs at z~2.8-3.8 constituting the only sample where both a spectroscopic measurement of their metallicity and deep IR observations (CANDELS+HUGS survey) are available. Fixing the metallicity of population synthesis models to the observed values, we determine best-fit physical parameters under different assumptions about the star-formation history and also consider the effect of nebular emission. For comparison we determine the UV slope of the objects, and use it to estimate their SFR_UV99 by correcting the UV luminosity following Meurer et al. (1999). A comparison between SFR obtained through SED-fitting (SFR_fit) and the SFR_UV99 shows that the latter are underestimated by a factor 2-10, regardless of the assumed SFH. Other SFR indicators (radio, far-IR, X-ray, recombination lines) coherently indicate SFRs a factor of 2-4 larger than SFR_UV99 and in closer agreement with SFR_fit. This discrepancy is due to the solar metallicity implied by the usual beta-A1600 conversion factor. We propose a refined relation, appropriate for sub-solar metallicity LBGs: A1600 = 5.32+1.99beta. This relation reconciles the dust-corrected UV with the SED-fitting and the other SFR indicators. We show that the fact that z~3 galaxies have sub-solar metallicity implies an upward revision by a factor of ~1.5-2 of the global SFRD, depending on the assumptions about the age of the stellar populations. We find very young best-fit ages (10-500 Myrs) for all our objects. From a careful examination of the uncertainties in the fit and the amplitude of the Balmer break we conclude that there is little evidence of the presence of old stellar population in at least half of the LBGs in our sample, suggesting that these objects are probably caught during a huge star-formation burst, rather than being the result of a smooth evolution.

astro-ph.GA

Dynamical properties of AMAZE and LSD galaxies from gas kinematics and the Tully-Fisher relation at z~3

We present a SINFONI integral field kinematical study of 33 galaxies at z~3 from the AMAZE and LSD projects which are aimed at studying metallicity and dynamics of high-redshift galaxies. The number of galaxies analyzed in this paper constitutes a significant improvement compared to existing data in the literature and this is the first time that a dynamical analysis is obtained for a relatively large sample of galaxies at z~3. 11 galaxies show ordered rotational motions (~30% of the sample), in these cases we estimate dynamical masses by modeling the gas kinematics with rotating disks and exponential mass distributions. We find dynamical masses in the range 2 \times 10^9 M\odot - 2 \times 10^11 M\odot with a mean value of ~ 2 \times 10^10 M\odot. By comparing observed gas velocity dispersion with that expected from models, we find that most rotating objects are dynamically "hot", with intrinsic velocity dispersions of the order of ~90 km s-1. The median value of the ratio between the maximum disk rotational velocity and the intrinsic velocity dispersion for the rotating objects is 1.6, much lower than observed in local galaxies value (~10) and slightly lower than the z~2 value (2 - 4). Finally we use the maximum rotational velocity from our modeling to build a baryonic Tully-Fisher relation at z~3. Our measurements indicate that z~3 galaxies have lower stellar masses (by a factor of ten on average) compared to local galaxies with the same dynamical mass. However, the large observed scatter suggests that the Tully-Fisher relation is not yet "in place" at these early cosmic ages, possibly due to the young age of galaxies. A smaller dispersion of the Tuly-Fisher relation is obtained by taking into account the velocity dispersion with the use of the S_0.5 indicator, suggesting that turbulent motions might have an important dynamical role.

astro-ph.CO

Thermodynamics from a scaling Hamiltonian

There are problems with defining the thermodynamic limit of systems with long-range interactions; as a result, the thermodynamic behavior of these types of systems is anomalous. In the present work, we review some concepts from both extensive and nonextensive thermodynamic perspectives. We use a model, whose Hamiltonian takes into account spins ferromagnetically coupled in a chain via a power law that decays at large interparticle distance $r$ as $1/r^α$ for $α\geq0$. Here, we review old nonextensive scaling. In addition, we propose a new Hamiltonian scaled by $2\frac{(N/2)^{1-α}-1}{1-α}$ that explicitly includes symmetry of the lattice and dependence on the size, $N$, of the system. The new approach enabled us to improve upon previous results. A numerical test is conducted through Monte Carlo simulations. In the model, periodic boundary conditions are adopted to eliminate surface effects.

cond-mat.stat-mech