arXiv subjects

P. Woitke

Publications and source records attributed to P. Woitke.

At least 37 records · Page 2Linked to original sources

arXiv2019

The infrared line-emitting regions of T Tauri protoplanetary disks

Mid-infrared molecular line emission detected with the Spitzer Space Telescope is often interpreted using slab models. However, we need to understand the mid-infrared line emission in 2D disk models, such that we gain information about from where the lines are being emitted and under which conditions, such that we gain information about number densities, temperatures, and optical depths in both the radial and vertical directions. In this paper, we introduce a series of 2D thermochemical models of a prototypical T Tauri protoplanetary disk, in order to examine how sensitive the line-emitting regions are to changes in the UV and X-ray fluxes, the disk flaring angle, dust settling, and the dust-to-gas ratio. These all affect the heating of the inner disk, and thus can affect the mid-infrared spectral lines. Using the ProDiMo and FLiTs codes, we produce a series of 2D thermochemical disk models. We find that there is often a significant difference between the gas and dust temperatures in the line emitting regions, and we illustrate that the size of the line emitting regions is relatively robust against changes in the stellar and disk parameters (namely, the UV and X-ray fluxes, the flaring angle, and dust settling). These results demonstrate the potential for localized variations in the line-emitting region to greatly affect the resulting spectra and line fluxes, and the necessity of allowing for such variations in our models.

astro-ph.EP↗

arXiv2019

Understanding the atmospheric properties and chemical composition of the ultra-hot Jupiter HAT-P-7b: I. Cloud and chemistry mapping

Ultra-hot Jupiters have recently attracted interest from observers and theoreticians alike, as they provide observationally accessible test cases. We apply a hierarchical modelling approach as a virtual laboratory to study cloud formation and gas-phase chemistry. We utilise 97 vertical 1D profiles of a 3D GCM for HAT-P-7b to evaluate our kinetic cloud formation model consistently with the local equilibrium gas-phase composition. The day/night temperature difference on HAT-P-7b (~ 2500K) causes clouds to form on the nightside (dominated by H2/He) while the dayside (dominated by H/He) retains cloud-free equatorial regions. The cloud particles vary in composition and size throughout the vertical extension of the cloud, but also globally. TiO2[s]/Al2O3[s]/CaTiO3[s]-particles of cm-sized radii occur in the higher dayside-latitudes, resulting in a dayside dominated by gas-phase opacity. The opacity on the nightside, however, is dominated by 0.01 ... 0.1 mum particles made of a material mix dominated by silicates. The gas pressure at which the atmosphere becomes optically thick is ~1d-4 bar in cloudy regions, and ~0.1 bar in cloud-free regions. HAT-P-7b features strong morning/evening terminator asymmetries, providing an example of patchy clouds and azimuthally-inhomogeneous chemistry. The large temperature differences result in an increasing geometrical extension from the night- to the dayside. The chemcial equilibrium H2O abundance at the terminator changes by < 1 dex with altitude and < 0.3 dex (a factor of 2) across the terminator for a given pressure, indicating that H2O abundances derived from transmission spectra can be representative of the well-mixed metallicity at P > 10 bar. We suggest the atmospheric C/O as an important tool to trace the presence and location of clouds in exoplanet atmospheres. Phase curve variability of HAT-P-7b is unlikely to be caused by dayside clouds.

astro-ph.EP↗

arXiv2019

The effects of dust evolution on disks in the mid-IR

In this paper, we couple together the dust evolution code two-pop-py with the thermochemical disk modelling code ProDiMo. We create a series of thermochemical disk models that simulate the evolution of dust over time from 0.018 Myr to 10 Myr, including the radial drift, growth, and settling of dust grains. We examine the effects of this dust evolution on the mid-infrared gas emission, focussing on the mid-infrared spectral lines of C2H2, CO2, HCN, NH3, OH, and H2O that are readily observable with Spitzer and the upcoming E-ELT and JWST. The addition of dust evolution acts to increase line fluxes by reducing the population of small dust grains. We find that the spectral lines of all species except C2H2 respond strongly to dust evolution, with line fluxes increasing by more than an order of magnitude across the model series as the density of small dust grains decreases over time. The C2H2 line fluxes are extremely low due to a lack of abundance in the infrared line-emitting regions, despite C2H2 being commonly detected with Spitzer, suggesting that warm chemistry in the inner disk may need further investigation. Finally, we find that the CO2 flux densities increase more rapidly than the other species as the dust disk evolves. This suggests that the flux ratios of CO2 to other species may be lower in disks with less-evolved dust populations.

astro-ph.EP↗

arXiv2019

Observing the gas component of circumplanetary disks around wide-orbit planet-mass companions in the (sub)mm regime

Several detections of wide-orbit planet-mass/sub-stellar companions around young solar-like stars were reported in the last decade. The origin of those possible planets is still unclear but accretion tracers and VLT/SPHERE observations indicate that they are surrounded by circumplanetary material or even a circumplanetary disk. We want to investigate if the gas component of disks around wide-orbit companions is detectable with current and future (sub)mm telescopes and what constraints such gas observations can provide on the nature of the circumplanetary material and on the mass of the companion. We applied the radiation thermo-chemical disk code ProDiMo to model the dust and gas component of passive circumplanetary disks and produced realistic synthetic observables. We considered different companion properties, disk parameters and radiative environments and compared the resulting synthetic observables to telescope sensitivities and to existing dust observations. The main criterion for a successful detection is the size of the circumplanetary disk. At a distance of about 150 pc, a circumplanetary disk with an outer radius of about 10 au is detectable with ALMA in about 6 hours in optically thick CO lines. Other aspects such as the companion's luminosity, disk inclination and background radiation fields are also relevant and should be considered to optimize the observing strategy for detection experiments. For most of the known wide-orbit planet-mass companions, their maximum theoretical disk size of one third of the Hill radius would be sufficient to allow detection of CO lines. It is therefore feasible to detect their gas disks and constrain the mass of the companion through the kinematic signature. Even in the case of non-detections such observations will provide stringent constraints on disk size and gas mass, information crucial for formation theories.

astro-ph.SR↗

arXiv2019

Consistent dust and gas models for protoplanetary disks IV. A panchromatic view of protoplanetary disks

Consistent modeling of protoplanetary disks requires the simultaneous solution of both continuum and line radiative transfer, heating/cooling balance between dust and gas and, of course, chemistry. Such models depend on panchromatic observations that can provide a complete description of the physical and chemical properties and energy balance of protoplanetary systems. Along these lines we present a homogeneous, panchromatic collection of data on a sample of 85 T Tauri and Herbig Ae objects for which data cover a range from X-rays to centimeter wavelengths. Datasets consist of photometric measurements, spectra, along with results from the data analysis such as line fluxes from atomic and molecular transitions. Additional properties resulting from modeling of the sources such as disc mass and shape parameters. dust size and PAH properties are also provided for completeness. Targets were selected based on their properties data availability. Data from more than 50 different telescopes and facilities were retrieved and combined in homogeneous datasets directly from public data archives or after being extracted from more than 100 published articles. X-ray data for a subset of 56 sources represent an exception as they were reduced from scratch and are presented here for the first time. Compiled datasets along with a subset of continuum and emission-line models are stored in a dedicated database and distributed through a publicly accessible online system. All datasets contain metadata descriptors that allow to backtrack them to their original resources. The graphical user interface of the online system allows the user to visually inspect individual objects but also compare between datasets and models. It also offers to the user the possibility to download any of the stored data and metadata for further processing.

astro-ph.SR↗

arXiv2019

Constraining the stellar energetic particle flux in young solar-like stars

Anomalies in the abundance measurements of short lived radionuclides in meteorites indicate that the protosolar nebulae was irradiated by a large number of energetic particles ($E\gtrsim10\,$MeV), often called solar cosmic rays. The particle flux of the contemporary Sun cannot explain these anomalies, but, similar to \mbox{T Tauri} stars, the young Sun was more active and probably produced enough high energy particles. However, the stellar particle (SP) flux of young stars is essentially unknown. We model the impact of high-energy ionization sources on the chemistry of the circumstellar environment (disks and envelopes). The model includes X-ray radiative transfer and makes use of particle transport models to calculate the individual molecular hydrogen ionization rates. We study the impact on the chemistry via the ionization tracers HCO$^+$ and N$_2$H$^+$. We argue that spatially resolved observations of those molecules combined with detailed models allow for disentangling the contribution of the individual high-energy ionization sources and to put constraints on the SP flux in young stars.

astro-ph.SR↗

arXiv2019

Sparkling nights and very hot days on WASP-18b: the formation of clouds and the emergence of an ionosphere

WASP-18b is an utra-hot Jupiter with a temperature difference of upto 2500K between day and night. Such giant planets begin to emerge as planetary laboratory for understanding cloud formation and gas chemistry in well-tested parameter regimes in order to better understand planetary mass loss and for linking observed element ratios to planet formation and evolution. We aim to understand where clouds form, their interaction with the gas phase chemistry through depletion and enrichment, the ionisation of the atmospheric gas and the possible emergence of an ionosphere on ultra-hot Jupiters. We utilize 1D profiles from a 3D atmosphere simulations for WASP-18b as input for kinetic cloud formation and gas-phase chemical equilibrium calculations. We solve our kinetic cloud formation model for these 1D profiles that sample the atmosphere of WASP-18b at 16 different locations along the equator and in the mid-latitudes and derive consistently the gas-phase composition. The dayside of WASP-18b emerges as completely cloud-free due to the very high atmospheric temperatures. In contrast, the nightside is covered in geometrically extended and chemically heterogeneous clouds with disperse particle size distributions. The atmospheric C/O increases to $>0.7$ and the enrichment of the atmospheric gas with cloud particles is $ρ_{\rm d}/ρ_{\rm gas}>10^{-3}$. The clouds that form at the limbs appear located farther inside the atmosphere and they are the least extended. Not all day-night terminator regions form clouds. The gas-phase is dominated by H$_2$, CO, SiO, H$_2$O, H$_2$S, CH$_4$, SiS. In addition, the dayside has a substantial degree of ionisation due to ions like Na$^+$, K$^+$, Ca$^+$, Fe$^+$. Al$^+$ and Ti$^+$ are the most abundant of their element classes. We find that WASP-18b, as one example for ultra-hot Jupiters, develops an ionosphere on the dayside.

astro-ph.EP↗

arXiv2018

Warm dust surface chemistry. H2 and HD formation

Molecular hydrogen (H2) is the main constituent of the gas in the planet-forming disks that surround many PMS stars. H2 can be incorporated in the atmosphere of the giant planets. HD has been detected in a few disks and can be considered the most reliable tracer of H2. We wish to form H2 and HD efficiently for the varied conditions encountered in protoplanetary disks: the densities vary from 1E4 to 1E16 cm^-3; the dust temperatures range from 5 to 1500 K, the gas temperatures go from 5 to a few 1000 Kelvin, and the ultraviolet field can be 1E7 stronger than the standard interstellar field. We implemented a comprehensive model of H2 and HD formation on cold and warm grain surfaces and via hydrogenated PAHs in the physico-chemical code ProDiMo. The H2 and HD formation can proceed via the Langmuir-Hinshelwood and Eley-Ridel mechanisms for physisorbed or chemisorbed H (D) atoms. H2 and HD also form by H (D) abstraction from hydrogenated neutral and ionised PAHs and via gas phase reactions. H2 and HD are formed efficiently on dust grain surfaces from 10 to 700 K. All the deuterium is converted into HD in UV shielded regions as soon as H2 is formed by gas-phase D abstraction reactions. The detailed model compares well with standard analytical prescriptions for H2 (HD) formation. At low temperatures, H2 is formed from the encounter of two physisorbed atoms. HD molecules form on the grain surfaces and in the gas-phase. At temperatures greater than 20 K, the meeting between a weakly bound H- (or D-) atom or a gas-phase H (D) atom and a chemisorbed atom is the most efficient H2 formation route. H2 formation through hydrogenated PAHs alone is efficient above 80 K. The contribution of hydrogenated PAHs to the overall H2 and HD formation is relatively low if chemisorption on silicate is taken into account and if a small hydrogen abstraction cross-section is used.

astro-ph.GA↗

arXiv2018

Warm dust surface chemistry in protoplanetary disks. Formation of phyllosilicates

The origin of the reservoirs of water on Earth is debated. The Earth's crust may contain at least three times more water than the oceans. This crust water is found in the form of phyllosilicates, whose origin probably differs from that of the oceans. We test the possibility to form phyllosilicates in protoplanetary disks, which can be the building blocks of terrestrial planets. We developed an exploratory rate-based warm surface chemistry model where water from the gas-phase can chemisorb on dust grain surfaces and subsequently diffuse into the silicate cores. We apply the phyllosilicate formation model to a zero-dimensional chemical model and to a 2D protoplanetary disk model (ProDiMo). The disk model includes in addition to the cold and warm surface chemistry continuum and line radiative transfer, photoprocesses (photodissociation, photoionization, and photodesorption), gas-phase cold and warm chemistry including three-body reactions, and detailed thermal balance. Despite the high energy barrier for water chemisorption on silicate grain surfaces and for diffusion into the core, the chemisorption sites at the surfaces can be occupied by a hydroxyl bond (-OH) at all gas and dust temperatures from 80 to 700 K for a gas density of 2E4 cm^-3. The chemisorption sites in the silicate cores are occupied at temperatures between 250 and 700 K. At higher temperatures thermal desorption of chemisorbed water occurs. The occupation efficiency is only limited by the maximum water uptake of the silicate. The timescales for complete hydration are at most 1E5 years for 1 mm radius grains at a gas density of 1E8 cm^-3. Phyllosilicates can be formed on dust grains at the dust coagulation stage in protoplanetary disks within 1 Myr. It is however not clear whether the amount of phyllosilicate formed by warm surface chemistry is sufficient compared to that found in Solar System objects.

astro-ph.GA↗

arXiv2018

Consistent dust and gas models for protoplanetary disks III. Models for selected objects from the FP7 DIANA project

The European FP7 project DIANA has performed a coherent analysis of a large set of observations from protoplanetary disks by means of thermo-chemical disk models. The collected data include extinction-corrected stellar UV and X-ray input spectra (as seen by the disk), photometric fluxes, low and high resolution spectra, interferometric data, emission line fluxes, line velocity profiles and line maps. We define and apply a standardized modelling procedure to simultaneously fit all these data by state-of-the-art modelling codes (ProDiMo, MCFOST, MCMax) which solve the continuum and line radiative transfer, disk chemistry, and the heating & cooling balance for both the gas and the dust. We allow for up to two radial disk zones to obtain our best-fitting models that have about 20 free parameters. This approach is novel and unique in its completeness and level of consistency. In this paper, we present the results from pure SED fitting for 27 objects and from the all inclusive DIANA-standard models for 14 objects. We fit most infrared to millimeter emission line fluxes within a factor better than 3, simultaneously with SED, PAH features and radial brightness profiles extracted from images at various wavelengths. Our analysis shows a number of Herbig Ae and T Tauri stars with very cold and massive outer disks which are situated at least partly in the shadow of a tall and gas-rich inner disk. The disk masses derived are often in excess to previously published values, since these disks are partially optically thick even at millimeter wavelength and so cold that they emit less than in the Rayleigh-Jeans limit. Some line observations cannot be reproduced by the models, probably caused by foreground cloud absorption or object variability. Our data collection, the fitted physical disk parameters as well as the full model output are available at an online database (http://www.univie.ac.at/diana).

astro-ph.EP↗

arXiv2018

Radiation thermo-chemical models of protoplanetary disks. Grain and polycyclic aromatic hydrocarbon charging

Context. Disks around pre-main-sequence stars evolve over time by turbulent viscous spreading. The main contender to explain the strength of the turbulence is the Magneto-Rotational-Instability (MRI) model, whose efficiency depends on the disk ionization fraction. Aims. We aim at computing self-consistently the chemistry including PAH charge chemistry, the grain charging and an estimate of an effective value of the turbulence alpha parameter in order to find observational signatures of disk turbulence. Methods. We introduced PAH and grain charging physics and their interplay with other gas-phase reactions in the physico-chemical code ProDiMo. Non-ideal magnetohydrodynamics effects such as Ohmic and ambipolar diffusion are parametrized to derive an effective value for the turbulent parameter alpha_eff . We explored the effects of turbulence heating and line broadening on CO isotopologue sub-millimeter lines. Results. The spatial distribution of alpha_eff depends on various unconstrained disk parameters such as the magnetic parameter beta_mag or the cosmic ray density distribution inside the protoplanetary disks. The inner disk midplane shows the presence of the so-called dead-zone where the turbulence is quasi-inexistent. The disk is heated mostly by thermal accommodation on dust grains in the dead-zone, by viscous heating outside the dead-zone up to a few hundred astronomical units, and by chemical heating in the outer disk. The CO rotational lines probe the warm molecular disk layers where the turbulence is at its maximum. However, the effect of turbulence on the CO line profiles is minimal and difficult to distinguish from the thermal broadening. Conclusions. Viscous heating of the gas in the disk midplane outside the dead-zone is efficient. The determination of alpha from CO rotational line observations alone is challenging.

astro-ph.GA↗

arXiv2018

Modelling mid-infrared molecular emission lines from T Tauri stars

We introduce a new modelling framework called FLiTs to simulate infrared line emission spectra from protoplanetary discs. This paper focuses on the mid-IR spectral region between 9.7 um to 40 um for T Tauri stars. The generated spectra contain several tens of thousands of molecular emission lines of H2O, OH, CO, CO2, HCN, C2H2, H2 and a few other molecules, as well as the forbidden atomic emission lines of SI, SII, SIII, SiII, FeII, NeII, NeIII, ArII and ArIII. In contrast to previously published works, we do not treat the abundances of the molecules nor the temperature in the disc as free parameters, but use the complex results of detailed 2D ProDiMo disc models concerning gas and dust temperature structure, and molecular concentrations. FLiTs computes the line emission spectra by ray tracing in an efficient, fast and reliable way. The results are broadly consistent with R=600 Spitzer/IRS observational data of T Tauri stars concerning line strengths, colour, and line ratios. In order to achieve that agreement, however, we need to assume either a high gas/dust mass ratio of order 1000, or the presence of illuminated disc walls at distances of a few au. The molecules in these walls cannot be photo-dissociated easily by UV because of the large densities in the walls which favour their re-formation. Most observable molecular emission lines are found to be optically thick, rendering a standard analysis with column densities difficult. We find that the difference between gas and dust temperatures in the disc surface is important for the line formation. We briefly discuss the effects of C/O ratio and choice of chemical rate network on these results. Our analysis offers new ways to infer the chemical and temperature structure of T Tauri discs from future JWST/MIRI observations, and to possibly detect secondary illuminated disc walls based on their specific mid-IR molecular signature.

astro-ph.SR↗

arXiv2017

Equilibrium chemistry down to 100 K - Impact of silicates and phyllosilicates on carbon/oxygen ratio

We introduce a fast and versatile computer code, GGchem, to determine the chemical composition of gases in thermo-chemical equilibrium down to 100 K, with or without equilibrium condensation. We review the data for molecular equilibrium constants, kp(T), from several sources and discuss which functional fits are most suitable for low temperatures. We benchmark our results against another chemical equilibrium code. We collect Gibbs free energies, dG(T), for about 200 solid and liquid species from the NIST-JANAF database and the geophysical database SUPCRTBL. We discuss the condensation sequence of the elements with solar abundances in phase equilibrium down to 100 K. Once the major magnesium silicates Mg2SiO4[s] and MgSiO3[s] have formed, the dust/gas mass ratio jumps to a value of about 0.0045 which is significantly lower than the often assumed value of 0.01. Silicate condensation is found to increase the carbon/oxygen ratio (C/O) in the gas from its solar value of ~0.55 up to ~0.71, and, by the additional intake of water and hydroxyl into the solid matrix, the formation of phyllosilicates at temperatures below ~400 K increases the gaseous C/O further to about 0.83. Metallic tungsten (W) is the first condensate found to become thermodynamically stable around 1600 - 2200 K (depending on pressure), several hundreds of Kelvin before subsequent materials like zirconium dioxide (ZrO2) or corundum (Al2O3) can condense. We briefly discuss whether tungsten, despite its low abundance of ~2.E-7 times the silicon abundance, could provide the first seed particles for astrophysical dust formation. The GGchem code is publicly available at https://github.com/pw31/GGchem.

astro-ph.EP↗

arXiv2017

X-ray radiative transfer in protoplanetary disks - The role of dust and X-ray background fields

The X-ray luminosities of T Tauri stars are about two to four orders of magnitude higher than the luminosity of the contemporary Sun. As these stars are born in clusters, their disks are not only irradiated by their parent star but also by an X-ray background field produced by the cluster members. We aim to quantify the impact of X-ray background fields produced by young embedded clusters on the chemical structure of disks. Further, we want to investigate the importance of the dust for X-ray radiative transfer in disks. We present a new X-ray radiative transfer module for the radiation thermo-chemical disk code ProDiMo, which includes X-ray scattering and absorption by both the gas and dust component. For the X-ray radiative transfer, we consider irradiation by the star and by X-ray background fields. To study the impact of X-rays on the chemical structure of disks we use the well-established disk ionization tracers N2H+ and HCO+. For evolved dust populations, X-ray opacities are mostly dominated by the gas; only for photon energies $E\gtrsim5-10\,$keV, dust opacities become relevant. Consequently, the local disk X-ray radiation field is only affected in dense regions close to the disk midplane. X-ray background fields can dominate the local X-ray disk ionization rate for disk radii $r\gtrsim20\,$au. However, the N2H+ and HCO+ column densities are only significantly affected in case of low cosmic-ray ionization rates, or if the background flux is at least a factor of ten higher than the flux level expected for clusters typical for the solar vicinity. Observable signatures of X-ray background fields in low-mass star-formation regions, like Taurus, are only expected for cluster members experiencing a strong X-ray background field. For the majority of the cluster members, the X-ray background field has only little impact on the disk chemical structure.

astro-ph.SR↗

arXiv2017

Direct mapping of the temperature and velocity gradients in discs. Imaging the vertical CO snow line around IM Lupi

Accurate measurements of the physical structure of protoplanetary discs are critical inputs for planet formation models. These constraints are traditionally established via complex modelling of continuum and line observations. Instead, we present an empirical framework to locate the CO isotopologue emitting surfaces from high spectral and spatial resolution ALMA observations. We apply this framework to the disc surrounding IM Lupi, where we report the first direct, i.e. model independent, measurements of the radial and vertical gradients of temperature and velocity in a protoplanetary disc. The measured disc structure is consistent with an irradiated self-similar disc structure, where the temperature increases and the velocity decreases towards the disc surface. We also directly map the vertical CO snow line, which is located at about one gas scale height at radii between 150 and 300 au, with a CO freeze-out temperature of $21\pm2$ K. In the outer disc ($> 300$ au), where the gas surface density transitions from a power law to an exponential taper, the velocity rotation field becomes significantly sub-Keplerian, in agreement with the expected steeper pressure gradient. The sub-Keplerian velocities should result in a very efficient inward migration of large dust grains, explaining the lack of millimetre continuum emission outside of 300 au. The sub-Keplerian motions may also be the signature of the base of an externally irradiated photo-evaporative wind. In the same outer region, the measured CO temperature above the snow line decreases to $\approx$ 15 K because of the reduced gas density, which can result in a lower CO freeze-out temperature, photo-desorption, or deviations from local thermodynamic equilibrium.

astro-ph.SR↗

arXiv2017

The chemistry of episodic accretion in embedded objects. 2D radiation thermo-chemical models of the post-burst phase

Episodic accretion is an important process in the evolution of young stars and their environment. The observed strong luminosity bursts of young stellar objects likely have a long lasting impact on the chemical evolution of the disk and envelope structure. We want to investigate observational signatures of the chemical evolution in the post-burst phase for embedded sources. With such signatures it is possible to identify targets that experienced a recent luminosity burst. We present a new model for episodic accretion chemistry based on the 2D, radiation thermo-chemical disk code ProDiMo. We have extended ProDiMo with a proper treatment for envelope structures. For a representative Class I model, we calculated the chemical abundances in the post-burst phase and produced synthetic observables like intensity maps and radial profiles. During a burst many chemical species, like CO, sublimate from the dust surfaces. As the burst ends they freeze out again (post-burst phase). This freeze-out happens from inside-out due to the radial density gradient in the disk and envelope structure. This inside-out freeze-out produces clear observational signatures in spectral line emission, like rings and distinct features in the slope of radial intensity profiles. We fitted synthetic C18O J=2-1 observations with single and two component fits and find that post-burst images are much better matched by the latter. Comparing the quality of such fits allows identification of post-burst targets in a model-independent way. Our models confirm that it is possible to identify post-burst objects from spatially resolved CO observations. However, to derive proper statistics, like frequencies of bursts, from observations it is important to consider aspects like the inclination and structure of the target and also dust properties as those have a significant impact on the freeze-out timescale.

astro-ph.SR↗

arXiv2017

Stellar energetic particle ionization in protoplanetary disks around T Tauri stars

Anomalies in the abundance measurements of short lived radionuclides in meteorites indicate that the protosolar nebulae was irradiated by a high amount of energetic particles (E$\gtrsim$10 MeV). The particle flux of the contemporary Sun cannot explain these anomalies. However, similar to T Tauri stars the young Sun was more active and probably produced enough high energy particles to explain those anomalies. We want to study the interaction of stellar energetic particles with the gas component of the disk and identify possible observational tracers of this interaction. We use a 2D radiation thermo-chemical protoplanetary disk code to model a disk representative for T Tauri stars. We use a particle energy distribution derived from solar flare observations and an enhanced stellar particle flux proposed for T Tauri stars. For this particle spectrum we calculate the stellar particle ionization rate throughout the disk with an accurate particle transport model. We study the impact of stellar particles for models with varying X-ray and cosmic-ray ionization rates. We find that stellar particle ionization has a significant impact on the abundances of the common disk ionization tracers HCO$^+$ and N$_2$H$^+$, especially in models with low cosmic-ray ionization rates. In contrast to cosmic rays and X-rays, stellar particles cannot reach the midplane of the disk. Therefore molecular ions residing in the disk surface layers are more affected by stellar particle ionization than molecular ions tracing the cold layers/midplane of the disk. Spatially resolved observations of molecular ions tracing different vertical layers of the disk allow to disentangle the contribution of stellar particle ionization from other competing ionization sources. Modeling such observations with a model like the one presented here allows to constrain the stellar particle flux in disks around T Tauri stars.

astro-ph.SR↗

arXiv2017

Thermochemical modelling of brown dwarf discs

The physical properties of brown dwarf discs, in terms of their shapes and sizes, are still largely unexplored by observations. To what extent brown dwarf discs are similar to scaled-down T Tauri discs is currently unknown, and this work is a step towards establishing a relationship through the eventual modelling of future observations. We use observations of the brown dwarf disc $ρ$ Oph 102 to infer a fiducial model around which we build a small grid of brown dwarf disc models, in order to model the CO, HCN, and HCO+ line fluxes and the chemistry which drives their abundances. These are the first brown dwarf models to be published which relate detailed, 2D radiation thermochemical disc models to observational data. We predict that moderately extended ALMA antenna configurations will spatially resolve CO line emission around brown dwarf discs, and that HCN and HCO+ will be detectable in integrated flux, following our conclusion that the flux ratios of these molecules to CO emission are comparable to that of T Tauri discs. These molecules have not yet been observed in sub-mm wavelengths in a brown dwarf disc, yet they are crucial tracers of the warm surface-layer gas and of ionization in the outer parts of the disc. We present the prediction that if the physical and chemical processes in brown dwarf discs are similar to those that occur in T Tauri discs -- as our models suggest -- then the same diagnostics that are used for T Tauri discs can be used for brown dwarf discs (such as HCN and HCO+ lines that have not yet been observed in the sub-mm), and that these lines should be observable with ALMA. Through future observations, either confirmation (or refutation) of these ideas about brown dwarf disc chemistry will have strong implications for our understanding of disc chemistry, structure, and subsequent planet formation in brown dwarf discs.

astro-ph.SR↗