Searcharxiv⌕ Search

arXiv subjects

Panagiotis D. Diamantoulakis

Publications and source records attributed to Panagiotis D. Diamantoulakis.

At least 37 records · Page 2Linked to original sources

Constellation Design and Detection under Generalized Hardware Impairments

This paper presents a maximum-likelihood detection framework that jointly mitigates hardware (HW) impairments in both amplitude and phase. By modeling transceiver distortions as residual amplitude and phase noise, we introduce the approximate phase-and-amplitude distortion detector (PAD-D), which operates in the polar domain and effectively mitigates both distortion components through distortion-aware weighting. The proposed detector performs reliable detection under generalized HW impairment conditions, achieving substantial performance gains over the conventional Euclidean detector (EUC-D) and the Gaussian-assumption phase noise detector (GAP-D), which is primarily designed to address phase distortions. In addition, we derive a closed-form high-SNR symbol error probability (SEP) approximation, which offers a generic analytical expression applicable to arbitrary constellations. Simulation results demonstrate that the PAD-D achieves up to an order-of-magnitude reduction in the error floor relative to EUC-D and GAP-D for both high-order quadrature amplitude modulation (QAM) and super amplitude phase-shift keying (SAPSK) constellations, establishing a unified and practical framework for detection under realistic transceiver impairments. Building on this framework, we further develop optimized constellations tailored to PAD-D, where the symbol positions are optimized in the complex plane to minimize SEP. The optimality of these constellations is confirmed through extensive simulations, which also verify the accuracy of the proposed analytical SEP approximation, even for the optimized designs.

eess.SP↗

Waveform Design for Over-the-Air Computing

In response to the increasing number of devices expected in next-generation networks, a shift to over-the-air (OTA) computing has been proposed. By leveraging the superposition of multiple access channels, OTA computing enables efficient resource management by supporting simultaneous uncoded transmission in the time and frequency domains. To advance the integration of OTA computing, our study presents a theoretical analysis that addresses practical issues encountered in current digital communication transceivers, such as transmitter synchronization (sync) errors and intersymbol interference (ISI). To this end, we investigate the theoretical mean squared error (MSE) for OTA transmission under sync errors and ISI, while also exploring methods for minimizing the MSE in OTA transmission. Using alternating optimization, we also derive optimal power policies for both the devices and the base station. In addition, we propose a novel deep neural network (DNN)-based approach to design waveforms that improve OTA transmission performance under sync errors and ISI. To ensure a fair comparison with existing waveforms such as raised cosine (RC) and better-than-raised-cosine (BTRC), we incorporate a custom loss function that integrates energy and bandwidth constraints along with practical design considerations such as waveform symmetry. Simulation results validate our theoretical analysis and demonstrate performance gains of the designed pulse over RC and BTRC waveforms. To facilitate testing of our results without the need to rebuild the DNN structure, we also provide curve-fitting parameters for the selected DNN-based waveforms.

cs.IT↗

RIS-Assisted 3D Spherical Splatting for Object Composition Visualization using Detection Transformers

The pursuit of immersive and structurally aware multimedia experiences has intensified interest in sensing modalities that reconstruct objects beyond the limits of visible light. Conventional optical pipelines degrade under occlusion or low illumination, motivating the use of radio-frequency (RF) sensing, whose electromagnetic waves penetrate materials and encode both geometric and compositional information. Yet, uncontrolled multipath propagation restricts reconstruction accuracy. Recent advances in Programmable Wireless Environments (PWEs) mitigate this limitation by enabling software-defined manipulation of propagation through Reconfigurable Intelligent Surfaces (RISs), thereby providing controllable illumination diversity. Building on this capability, this work introduces a PWE-driven RF framework for three-dimensional object reconstruction using material-aware spherical primitives. The proposed approach combines RIS-enabled field synthesis with a Detection Transformer (DETR) that infers spatial and material parameters directly from extracted RF features. Simulation results confirm the framework's ability to approximate object geometries and classify material composition with an overall accuracy of 79.35%, marking an initial step toward programmable and physically grounded RF-based 3D object composition visualization.

eess.SP↗

Performance Analysis of Wireless-Powered Pinching Antenna Systems

Pinching antenna system (PAS) serves as a groundbreaking paradigm that enhances wireless communications by flexibly adjusting the position of pinching antenna (PA) and establishing a strong line-of-sight (LoS) link, thereby reducing the free-space path loss. This paper introduces the concept of wireless-powered PAS, and investigates the reliability of wireless-powered PAS to explore the advantages of PA in improving the performance of wireless-powered communication (WPC) system. In addition, we derive the closed-form expressions of outage probability and ergodic rate for the practical lossy waveguide case and ideal lossless waveguide case, respectively, and analyze the optimal deployment of waveguides and user to provide valuable insights for guiding their deployments. The results show that an increase in the absorption coefficient and in the dimensions of the user area leads to higher in-waveguide and free-space propagation losses, respectively, which in turn increase the outage probability and reduce the ergodic rate of the wireless-powered PAS. However, the performance of wireless-powered PAS is severely affected by the absorption coefficient and the waveguide length, e.g., under conditions of high absorption coefficient and long waveguide, the outage probability of wireless-powered PAS is even worse than that of traditional WPC system. While the ergodic rate of wireless-powered PAS is better than that of traditional WPC system under conditions of high absorption coefficient and long waveguide. Interestingly, the wireless-powered PAS has the optimal time allocation factor and optimal distance between power station (PS) and access point (AP) to minimize the outage probability or maximize the ergodic rate. Moreover, the system performance of PS and AP separated at the optimal distance between PS and AP is superior to that of PS and AP integrated into a hybrid access point.

eess.SP↗

Uplink RSMA for Pinching-Antenna Systems

One of the key goals of next-generation wireless networks is to adapt to changing conditions and meet the growing demand for reliable, high-capacity communications from emerging applications. Overcoming the limitations of conventional technologies, such as fixed antenna positions, is essential to achieving this objective because it mitigates the impact of path loss on the received signal and creates strong line-of-sight links, enhancing system performance. With this in mind, the newly proposed pinching antenna systems (PASs) are a promising solution for indoor applications because they can activate antennas across a waveguide deployed in a room, thus reducing the distance between the transmitter and receiver. In this paper, we investigate a two-user, two-pinching-antenna uplink PAS, in which the transmitters use rate splitting to create a more resilient framework than non-orthogonal multiple access (NOMA). For this network, we derive novel closed-form expressions for the outage probability. Numerical results validate these expressions, proving that the proposed rate-splitting multiple access (RSMA) scheme outperforms NOMA PAS.

eess.SP↗

Beamforming Design for Pinching Antenna Systems with Multiple Receive Antennas

Next-generation networks require intelligent and robust channel conditions to support ultra-high data rates, seamless connectivity, and large-scale device deployments in dynamic environments. While flexible antenna technologies such as fluid and movable antennas offer some degree of adaptability, their limited reconfiguration range and structural rigidity reduce their effectiveness in restoring line-of-sight (LoS) links. As a complementary solution, pinching antenna systems (PASs) enable fine-grained, hardware-free control of radiation locations along a waveguide, offering enhanced flexibility in challenging propagation environments, especially under non-LoS (NLoS) conditions. This paper introduces a general and novel modeling framework for downlink PASs targeting users equipped with multiple receive antennas, addressing a practical yet underexplored scenario in the existing literature. Specifically, we first derive an analytical relationship between the received signal-to-noise ratio and the pinching antenna (PA) positions, and based on this, we propose a two-layer placement strategy. First, we optimize the central radiation point using large-scale channel characteristics, and then we use a heuristic compressed placement algorithm to approximate phase alignment across multiple receive antennas and select a spatially compact set of active elements. Simulation results demonstrate notable performance gains over conventional single-antenna schemes, particularly in short-range scenarios with dense PAs and widely spaced user antennas.

eess.SP↗

Deep Learning Optimization of Two-State Pinching Antennas Systems

The evolution of wireless communication systems requires flexible, energy-efficient, and cost-effective antenna technologies. Pinching antennas (PAs), which can dynamically control electromagnetic wave propagation through binary activation states, have recently emerged as a promising candidate. In this work, we investigate the problem of optimally selecting a subset of fixed-position PAs to activate in a waveguide, when the aim is to maximize the communication rate at a user terminal. Due to the complex interplay between antenna activation, waveguide-induced phase shifts, and power division, this problem is formulated as a combinatorial fractional 0-1 quadratic program. To efficiently solve this challenging problem, we use neural network architectures of varying complexity to learn activation policies directly from data, leveraging spatial features and signal structure. Furthermore, we incorporate user location uncertainty into our training and evaluation pipeline to simulate realistic deployment conditions. Simulation results demonstrate the effectiveness and robustness of the proposed models.

cs.LG↗

Fluid Aerial Networks: UAV Rotation for Inter-Cell Interference Mitigation

With the rapid development of aerial infrastructure, unmanned aerial vehicles (UAVs) that function as aerial base stations (ABSs) extend terrestrial network services into the sky, enabling on-demand connectivity and enhancing emergency communication capabilities in cellular networks by leveraging the flexibility and mobility of UAVs. In such a UAV-assisted network, this paper investigates position-based beamforming between ABSs and ground users (GUs). To mitigate inter-cell interference, we propose a novel fluid aerial network that leverages ABS rotation to increase multi-cell capacity and overall network efficiency. Specifically, considering the line-of-sight channel model, the spatial beamforming weights are determined by the orientation angles of the GUs. In this direction, we examine the beamforming gain of a two-dimensional multiple-input multiple-output (MIMO) array at various ground positions, revealing that ABS rotation significantly affects multi-user channel correlation and inter-cell interference. Based on these findings, we propose an alternative low-complexity algorithm to design the optimal rotation angle for ABSs, aiming to reduce inter-cell interference and thus maximize the sum rate of multi-cell systems. In simulations, exhaustive search serves as a benchmark to validate the optimization performance of the proposed sequential ABS rotation scheme. Moreover, simulation results demonstrate that, in interference-limited regions, the proposed ABS rotation paradigm can significantly reduce inter-cell interference in terrestrial networks and improve the multi-cell sum rate by approximately 10\% compared to fixed-direction ABSs without rotation.

cs.NI↗

Cognitive-Radio Functionality: A Novel Configuration for STAR-RIS assisted RSMA Networks

Cognitive radio rate-splitting multiple access (CR-RSMA) has emerged as a promising multiple access framework that can efficiently manage interference and adapt dynamically to heterogeneous quality-of-service (QoS) requirements. To effectively support such demanding access schemes, programmable wireless environments have attracted considerable attention, especially through simultaneously transmitting and reflecting reconfigurable intelligent surfaces (STAR-RISs), which can enable full-space control of signal propagation in asymmetric user deployments. In this paper, we propose the cognitive radio (CR) functionality for STAR-RIS-assisted CR-RSMA systems, leveraging the unique capability of the STAR-RIS to combine element and power splitting for adaptive control of transmission and reflection in CR scenarios. Specifically, the proposed CR functionality partitions the STAR-RIS into two regions independently controlling the transmission and reflection of signals, simultaneously ensuring the required QoS for the primary user and enhancing the performance of the secondary user. To accurately characterize the system performance, we derive analytical expressions for the ergodic rate of the secondary user and the outage rate of the primary user under Nakagami-m fading. Finally, simulation results show that the proposed approach effectively manages interference, guarantees the QoS of the primary user, and significantly improves the throughput of the secondary user, highlighting STAR-RIS as an efficient solution for CR-RSMA-based services.

cs.ET↗

OFDMA for Pinching Antenna Systems

Pinching-antenna (PA) systems route millimeter wave (mmWave) signals through a leaky waveguide and radiate them at "pinch" apertures, offering low-cost line-of-sight (LoS) coverage. However, when multiple PAs serve multiple users simultaneously, the downlink channel becomes strongly frequency-selective, creating inter-symbol interference (ISI) that existing single-carrier designs overlook. This paper models the overall channel as a finite impulse response (FIR) filter, characterizes its frequency selectivity, and explicitly accounts for the resulting ISI. To overcome ISI, we introduce an orthogonal frequency-division multiple access (OFDMA)-based framework and formulate a max-min resource-allocation problem to achieve user fairness. A lightweight two-stage heuristic-greedy subcarrier assignment, followed by per-user water-filling, achieves near-optimal fairness with polynomial complexity. Simulation results for an indoor layout demonstrate that the proposed scheme notably increases the minimum user rate compared to time-division single-carrier baselines and remains robust under moderate LoS blockage.

eess.SP↗

Resolving the Double Near-Far Problem via Wireless Powered Pinching-Antenna Networks

This letter introduces a novel wireless powered communication system, referred to as a wireless powered pinching-antenna network (WPPAN), utilizing a single waveguide with pinching antennas to address the double near-far problem inherent in wireless powered networks. In the proposed WPPAN, users harvest energy from spatially distributed pinching antennas in the downlink and use the collected power to transmit messages in the uplink. Furthermore, to manage the combinatorial complexity associated with activating the pinching antennas, we propose three approaches of varying complexity to simplify the original resource allocation problem and then solve it efficiently using convex optimization methods. Simulation results confirm that the proposed WPPAN system effectively mitigates the double near-far problem by providing antenna resources closer to the users, thereby enhancing both downlink energy harvesting and uplink data transmission.

eess.SP↗

Secrecy Rate Maximization with Artificial Noise for Pinching-Antenna Systems

Security is emerging as a critical performance metric for next-generation wireless networks, but conventional multiple-input-multiple-output (MIMO) systems often suffer from severe path loss and are vulnerable to nearby eavesdroppers due to their fixed-antenna configurations. Pinching-antenna systems (PAS) offer a promising alternative, leveraging reconfigurable pinching antennas (PAs) positioned along low-loss dielectric waveguides to enhance channel conditions and dynamically mitigate security threats. In this paper, we propose an artificial noise (AN)-based beamforming scheme for downlink transmissions in PAS, with the goal of maximizing the secrecy rate. A closed-form solution is derived for the single-waveguide scenario, while an alternating optimization approach addresses more complex multiple waveguide setups. Numerical results show that the proposed scheme significantly outperforms conventional MIMO and existing PAS security schemes.

eess.SP↗

Cross-Band Modulation Design for Hybrid RF-Optical Systems

We present a novel cross-band modulation framework that combines 3D modulation in the RF domain with intensity modulation and direct detection in the optical domain, the first such integration to enhance communication reliability. By harnessing cross-band diversity, the framework optimizes symbol mapping across RF and optical links, significantly boosting mutual information (MI) and reducing symbol error probability (SEP). Two practical modulation schemes implement this framework, both using quadrature amplitude modulation in the RF subsystem. The first is a linear cross-band mapping scheme, where RF symbols are mapped to optical intensity values via an analytically tractable optimization that ensures O(1) detection complexity while minimizing SEP. The second employs a deep neural network-generated (DNN-Gen) 3D constellation with a custom loss function that adaptively optimizes symbol placement to maximize MI and minimize SEP. Although DNN-Gen incurs higher computational complexity than the linear approach, it adapts the 3D constellation to varying signal-to-noise ratios, yielding significant performance gains. Furthermore, we derive a theoretical MI benchmark for the linear scheme, offering insights into the fundamental limits of RF-optical cross-band communication. Extensive Monte Carlo simulations confirm that both schemes outperform SoA cross-band modulation techniques, including cross-band pulse amplitude modulation, with notable improvements. Additionally, DNN-Gen maintains high performance over a range of RF SNRs, lessening the need for exhaustive training at every operating condition. Overall, these results establish our cross-band modulation framework as a scalable, high-performance solution for next-generation hybrid RF-optical networks, balancing low complexity with optimized symbol mapping to maximize system reliability and efficiency.

eess.SP↗

Secure Wireless-Powered zeRIS Communications

This paper introduces the concept of wireless-powered zero-energy reconfigurable intelligent surface (zeRIS), and investigates a wireless-powered zeRIS aided communication system in terms of security, reliability and energy efficiency. In particular, we propose three new wireless-powered zeRIS modes: 1) in mode-I, N reconfigurable reflecting elements are adjusted to the optimal phase shift design of information user to maximize the reliability of the system; 2) in mode-II, N reconfigurable reflecting elements are adjusted to the optimal phase shift design of cooperative jamming user to maximize the security of the system; 3) in mode-III, N1 and N2 (N1+N2=N) reconfigurable reflecting elements are respectively adjusted to the optimal phase shift designs of information user and cooperative jamming user to balance the reliability and security of the system. Then, we propose three new metrics, i.e., joint outage probability (JOP), joint intercept probability (JIP), and secrecy energy efficiency (SEE), and analyze their closed-form expressions in three modes, respectively. The results show that under high transmission power, all the diversity gains of three modes are 1, and the JOPs of mode-I, mode-II and mode-III are improved by increasing the number of zeRIS elements, which are related to N2, N, and N^2_1, respectively. In addition, mode-I achieves the best JOP, while mode-II achieves the best JIP among three modes. We exploit two security-reliability trade-off (SRT) metrics, i.e., JOP versus JIP, and normalized joint intercept and outage probability (JIOP), to reveal the SRT performance of the proposed three modes. It is obtained that mode-II outperforms the other two modes in the JOP versus JIP, while mode-III and mode-II achieve the best performance of normalized JIOP at low and high transmission power, respectively.

eess.SP↗

Minimum Data Rate Maximization for Uplink Pinching-Antenna Systems

This paper addresses, for the first time, the uplink performance optimization of multi-user pinching-antenna (PA) systems, recently developed for next-generation wireless networks. By leveraging the unique capabilities of PAs to dynamically configure wireless channels, we focus on maximizing the minimum achievable data rate between devices to achieve a balanced trade-off between throughput and fairness. An effective approach is proposed that separately optimizes the positions of the PAs and the resource allocation. The antenna positioning problem is reformulated into a convex one, while a closed-form solution is provided for the resource allocation. Simulation results demonstrate the superior performance of the investigated system using the proposed algorithm over corresponding counterparts, emphasizing the significant potential of PA systems for robust and efficient uplink communication in next-generation wireless networks.

cs.IT↗

Performance Analysis of Pinching-Antenna Systems

The sixth generation of wireless networks envisions intelligent and adaptive environments capable of meeting the demands of emerging applications such as immersive extended reality, advanced healthcare, and the metaverse. However, this vision requires overcoming critical challenges, including the limitations of conventional wireless technologies in mitigating path loss and dynamically adapting to diverse user needs. Among the proposed reconfigurable technologies, pinching antenna systems (PASs) offer a novel way to turn path loss into a programmable parameter by using dielectric waveguides to minimize propagation losses at high frequencies. In this paper, we develop a comprehensive analytical framework that derives closed-form expressions for the outage probability and average rate of PASs while incorporating both free-space path loss and waveguide attenuation under realistic conditions. In addition, we characterize the optimal placement of pinching antennas to maximize performance under waveguide losses. Numerical results show the significant impact of waveguide losses on system performance, especially for longer waveguides, emphasizing the importance of accurate loss modeling. Despite these challenges, PASs consistently outperform conventional systems in terms of reliability and data rate, underscoring their potential to enable high-performance programmable wireless environments.

cs.NI↗

Split Learning in Computer Vision for Semantic Segmentation Delay Minimization

In this paper, we propose a novel approach to minimize the inference delay in semantic segmentation using split learning (SL), tailored to the needs of real-time computer vision (CV) applications for resource-constrained devices. Semantic segmentation is essential for applications such as autonomous vehicles and smart city infrastructure, but faces significant latency challenges due to high computational and communication loads. Traditional centralized processing methods are inefficient for such scenarios, often resulting in unacceptable inference delays. SL offers a promising alternative by partitioning deep neural networks (DNNs) between edge devices and a central server, enabling localized data processing and reducing the amount of data required for transmission. Our contribution includes the joint optimization of bandwidth allocation, cut layer selection of the edge devices' DNN, and the central server's processing resource allocation. We investigate both parallel and serial data processing scenarios and propose low-complexity heuristic solutions that maintain near-optimal performance while reducing computational requirements. Numerical results show that our approach effectively reduces inference delay, demonstrating the potential of SL for improving real-time CV applications in dynamic, resource-constrained environments.

cs.CV↗

Distributed Uplink Rate Splitting Multiple Access (DU-RSMA): Principles and Performance Analysis

One of the main goals of the upcoming sixth-generation (6G) wireless networks is the ability to support higher network density, while ensuring a high quality of service for each user. In this paper, we introduce distributed uplink rate-splitting multiple access (DU-RSMA), define its basic principles, and provide insights into its advantages. Specifically, a system with two remote radio heads (RRHs) and two users is investigated. To improve the performance of the system, we consider that the RRHs can communicate through a feedback link, and thus they are able to decode the received messages either independently or with the assistance of the other RRH, since the decoded information can be shared through the feedback link. It should be noted that this scheme increases the achievable capacity region compared to the known multiple access schemes, which is also evaluated by a novel metric termed ``fill factor''. Both the case of adaptive transmission rates and the case of fixed transmission rates are investigated. To this end, the ergodic rate is investigated to cover the former case, while the outage probability is studied for the latter. Closed-form expressions are derived for both metrics. Finally, the analytical expressions are validated by simulation results, which explicitly show the impact of each parameter on the performance of the system, and prove that the proposed scheme outperforms the corresponding benchmarks.

cs.IT↗