arXiv subjects

Panukorn Sombut

Publications and source records attributed to Panukorn Sombut.

8 recordsLinked to original sources

arXiv2026

CO on a Rh/Fe3O4 single-atom catalyst: high-resolution infrared spectroscopy and near-ambient-pressure scanning tunnelling microscopy

Infrared reflection absorption spectroscopy (IRAS) offers a powerful route to bridging the materials and pressure gaps between surface science and powder catalysis. Using a newly developed IRAS setup optimised for dielectric single crystals, we investigate CO adsorption on the model single-atom catalyst Rh/Fe3O4(001). IRAS resolves three species: monocarbonyls at isolated, twofold-coordinated Rh adatoms, monocarbonyls at fivefold-coordinated Rh atoms embedded in the surface, and gem-dicarbonyls at isolated, twofold-coordinated Rh adatoms. Under ultra-high vacuum (UHV) conditions, RhCO monocarbonyl species at adatom sites dominate. Rh(CO)2 gem-dicarbonyl formation is kinetically hindered and occurs predominantly through CO-induced dissociation of Rh dimers rather than sequential adsorption of two CO molecules at an isolated, twofold Rh adatom. The sequential-adsorption pathway to Rh(CO)2 becomes accessible at millibar CO pressures as evidenced by near-ambient-pressure scanning tunnelling microscopy (NAP-STM). These findings link the UHV behaviour to that expected under realistic reaction conditions. Assignments of the vibrational frequencies to individual species rely on isotopic labelling, thermal treatments, and a review of previous SPM, XPS, and TPD data, supported by density functional theory (DFT)-based calculations. While theory provides qualitative insight, such as the instability of dicarbonyls on fivefold-coordinated Rh atoms, it does not yet reproduce experimental frequencies quantitatively and is sensitive to the computational parameters, highlighting the need for robust experimental benchmarks. The spectroscopic fingerprints established here provide a reliable foundation for identifying Rh coordination environments in oxide-supported single-atom catalysts.

cond-mat.mtrl-sci↗

arXiv2026

Hydrogen Activation via Dihydride Formation on a Rh1/Fe3O4(001) Single-Atom Catalyst

Hydrogen activation is a key elementary step in catalytic hydrogenation. In heterogeneous catalysis, it usually proceeds through dissociative adsorption on metal nanoparticles followed by surface diffusion or spillover, whereas homogeneous catalysts activate H2 through dihydride or dihydrogen intermediates at a single metal center. Here, we show that isolated Rh adatoms supported on Fe3O4(001) activate hydrogen through formation of a stable dihydride species without atomic H spillover. Temperature-programmed desorption, X-ray photoelectron spectroscopy, and scanning tunneling microscopy collectively reveal strong (approximately 1 eV) hydrogen adsorption exclusively at isolated Rh1 sites, while isotope-exchange experiments further demonstrate that hydrogen remains localized. Density-functional theory based calculations indicate a barrierless conversion from molecular H2 to the dihydride, and random-phase approximation calculations further confirm the relative stability of the dihydride. Together, these results show that single-atom Rh sites cleave and bind H2 through a dihydride pathway analogous to homogeneous complexes, establishing a mechanistic bridge between homogeneous and heterogeneous catalysis.

cond-mat.mtrl-sci↗

arXiv2025

Multi-Technique Characterization of Rhodium Gem-Dicarbonyls on TiO$_2$(110)

Gem-dicarbonyls of transition metals supported on metal (oxide) surfaces are common intermediates in heterogeneous catalysis. While infrared (IR) spectroscopy is a standard tool for detecting these species on applied catalysts, the ill-defined crystallographic environment of species observed on powder catalysts renders data interpretation challenging. In this work, we apply a multi-technique surface science approach to investigate rhodium gem-dicarbonyls on a single-crystalline rutile TiO$_2$(110) surface. We combine spectroscopy, scanning probe microscopy, and Density Functional Theory (DFT) to determine their location and coordination on the surface. IR spectroscopy shows the successful creation of gem-dicarbonyls on a titania single crystal by exposing deposited Rh atoms to CO gas, followed by annealing to 200-250 K. Low-temperature scanning tunneling microscopy (STM) and non-contact atomic force microscopy (nc-AFM) data reveal that these complexes are mostly aligned along the [001] crystallographic direction, corroborating theoretical predictions. Notably, x-ray photoelectron spectroscopy (XPS) data reveal multiple rhodium species on the surface, even when the IR spectra show only the signature of rhodium gem-dicarbonyls. As such, our results highlight the complex behavior of carbonyls on metal oxide surfaces, and demonstrate the necessity of multi-technique approaches for the adequate characterization of single-atom catalysts.

physics.chem-ph↗

arXiv2024

Quantitative measurement of cooperative binding in partially dissociated water dimers at the hematite R-cut surface

Water-solid interfaces pervade the natural environment and modern technology. On some surfaces, water-water interactions induce the formation of partially dissociated interfacial layers; understanding why is important to model processes in catalysis or mineralogy. The complexity of the partially dissociated structures often make it difficult to probe them in a quantitative manner. Here, we utilize normal incidence x-ray standing waves (NIXSW) to study the structure of partially dissociated water dimers (H2O-OH) at the Fe2O3(012) surface (also called (1-102) or R-cut surface); a system simple enough to be tractable, yet complex enough to capture the essential physics. We find the H2O and terminal OH groups to be the same height above the surface within experimental error (1.45 +/- 0.04 Angstrom and 1.47 +/- 0.02 Angstrom, respectively), in line with DFT-based calculations that predict comparable Fe-O bond lengths for both water and OH species. This result is understood in the context of cooperative binding, where the formation of the H-bond between adsorbed H2O and OH induces the H2O to bind more strongly, and OH to bind more weakly compared to when these species are isolated on the surface. The surface OH formed by the liberated proton is found to be in plane with a bulk truncated (012) surface (-0.01 +/- 0.02 Angstrom). DFT calculations based on various functionals correctly model the cooperative effect, but overestimate the water-surface interaction.

cond-mat.mtrl-sci↗

arXiv2024

Digging its own Site: Linear Coordination Stabilizes a Pt1/Fe2O3 Single-Atom Catalyst

Determining the local coordination of the active site is a pre-requisite for the reliable modeling of single-atom catalysts (SACs). Obtaining such information is difficult on powder-based systems, so much emphasis is placed on density functional theory-based computations based on idealized low-index surfaces of the support. In this work, we investigate how Pt atoms bind to the (1-102) facet of Fe2O3, a common support material in SAC. Using a combination of scanning tunneling microscopy (STM), x-ray photoelectron spectroscopy (XPS), and an extensive computational evolutionary search, we find that Pt atoms significantly reconfigure the support lattice to facilitate a pseudo-linear coordination to surface oxygen atoms. Despite breaking three surface Fe-O bonds, this geometry is favored by 0.84 eV over the best configuration involving an unperturbed support. We suggest that the linear O-Pt-O configuration is common in reactive Pt-based SAC systems because it balances thermal stability with the ability to adsorb reactants from the gas phase, and that extensive structural searches are likely necessary to determine realistic active site geometry in single-atom catalysis.

cond-mat.mtrl-sci↗

arXiv2024

A Multi-Technique Study of C2H4 Adsorption on a Model Single-Atom Rh1 Catalyst

Single-atom catalysts are potentially ideal model systems to investigate structure-function relationships in catalysis, if the active sites can be uniquely determined. In this work, we study the interaction of C2H4 with a model Rh/Fe3O4(001) catalyst that features 2-, 5-, and 6-fold coordinated Rh adatoms, as well as Rh clusters. Using multiple surface-sensitive techniques in combination with calculations of density functional theory (DFT), we follow the thermal evolution of the system and disentangle the behavior of the different species. C2H4 adsorption is strongest at the 2-fold coordinated Rh1 with a DFT-determined adsorption energy of -2.26 eV. However, desorption occurs at lower temperatures than expected because the Rh migrates into substitutional sites within the support, where the molecule is more weakly bound. Adsorption at the 5-fold coordinated Rh sites is predicated to -1.49 eV, but the superposition of this signal with that from small Rh clusters and additional heterogeneity leads to a broad C2H4 desorption shoulder in TPD above room temperature.

cond-mat.mtrl-sci↗

arXiv2023

A Multi-Technique Study of C2H4 Adsorption on Fe3O4(001)

The adsorption/desorption of ethene (C2H4), also commonly known as ethylene, on Fe3O4(001) was studied under ultrahigh vacuum conditions using temperature programmed desorption (TPD), scanning tunneling microscopy, x-ray photoelectron spectroscopy, and density functional theory (DFT) based computations. To interpret the TPD data, we have employed a new analysis method based on equilibrium thermodynamics. C2H4 adsorbs intact at all coverages and interacts most strongly with surface defects such as antiphase domain boundaries and Fe adatoms. On the regular surface, C2H4 binds atop surface Fe sites up to a coverage of 2 molecules per (rt2xrt2)R45° unit cell, with every second Fe occupied. A desorption energy of 0.36 eV is determined by analysis of the TPD spectra at this coverage, which is approximately 0.1-0.2 eV lower than the value calculated by DFT + U with van der Waals corrections. Additional molecules are accommodated in between the Fe rows. These are stabilized by attractive interactions with the molecules adsorbed at Fe sites. The total capacity of the surface for C2H4 adsorption is found to be close to 4 molecules per (rt2xrt2)R45° unit cell.

cond-mat.mtrl-sci↗

arXiv2022

Role of Polarons in Single-Atom Catalysts: Case Study of Me1 [Au1, Pt1, and Rh1] on TiO2(110)

The local environment of metal-oxide supported single-atom catalysts plays a decisive role in the surface reactivity and related catalytic properties. The study of such systems is complicated by the presence of point defects on the surface, which are often associated with the localization of excess charge in the form of polarons. This can affect the stability, the electronic configuration, and the local geometry of the adsorbed adatoms. In this work, through the use of density functional theory and surface-sensitive experiments, we study the adsorption of Rh1, Pt1, and Au1 metals on the reduced TiO2(110) surface; a prototypical polaronic material. A systematic analysis of the adsorption configurations and oxidation states of the adsorbed metals reveals different types of couplings between adsorbates and polarons. As confirmed by scanning tunneling microscopy measurements, the favored Pt1 and Au1 adsorption at oxygen vacancy sites is associated with a strong electronic charge transfer from polaronic states to adatom orbitals, which results in a reduction of the adsorbed metal. In contrast, the Rh1 adatoms interact weakly with the excess charge, which leaves the polarons largely unaffected. Our results show that an accurate understanding of the properties of single-atom catalysts on oxide surfaces requires a careful account of the interplay between adatoms, vacancy sites, and polarons.

cond-mat.mtrl-sci↗