Searcharxiv⌕ Search

arXiv subjects

Paola Ayala

Publications and source records attributed to Paola Ayala.

16 recordsLinked to original sources

Temperature dependence of the Raman spectrum of orthorhombic Bi2Se3

Bismuth selenide, a benchmark topological insulator, grows in a trigonal structure at ambient conditions and exhibits a number of enticing properties related to the formation of Dirac surface states. Besides this polytype, a metastable orthorhombic modification with Pnma space group has been produced by electrodeposition and high-pressure high-temperature synthesis displaying upon Sb doping significant thermoelectric properties in the midtemperature range. However, very little experimental information is available on the fundamental properties of this polytype, such as, e.g., the electronic band gap and the lattice dynamics. We report here the temperature dependence of the Raman spectra of orthorhombic Bi2Se3 between 10 K and 300 K, which displays an anharmonic behavior of the optical phonons that can be modelled with a two-phonon decay channel. In order to analyze the data we performed ab initio calculations of the electronic bandstructure, the phonon frequencies at the center of the Brillouin zone, and the phonon dispersion relations along the main symmetry directions, examining the effect of spin-orbit coupling in both phonon and electronic energies. Lastly, we report here cathodoluminescence experiments at 83 K that set a lower limit to the electronic bandgap at 0.835 eV, pointing to an indirect nature, in agreement with our calculations. These results shed light to essential properties of orthorhombic Bi2Se3 for further understanding of the potential of this semiconductor for thermoelectrics and new applications.

cond-mat.mtrl-sci↗

Ultra-clean isotope engineered double-walled carbon nanotubes as tailored hosts to trace the growth of carbyne

Increasing attention is currently given to carbyne, the sp1 hybridized one-dimensional carbon allotrope, because of its predicted outstanding mechanical, optical, and electrical properties. Although recently substantial progress has been reported on confined carbyne synthesized inside double-walled carbon nanotubes (DWCNTs), its formation mechanism and precursors for growth remain elusive. Here, we show a rational design of isotope engineered ultra-clean DWCNTs as tailored hosts to trace the growth of carbyne, which allows to identify the precursor and unravel the formation mechanism of carbyne during high-vacuum annealing at high-temperatures. Using this approach, ultra-clean DWCNTs with 80.4% 13C-enriched inner walls and outer tubes of naturally abundant served to unambiguously prove that only the carbonaceous materials inside the DWCNTs can act as precursors. The exchange of C atoms between inner and outer tubes happens without any growth of carbyne. After applying a secondary oxidation step, it is possible to produce the carbonaceous precursors from the partially oxidized DWCNTs. In this manner, not only carbyne with a record of ~28.8% 13C enrichment is grown, but concomitant healing, reorganization and regrowth of the DWCNTs occurs. This work enables to identify the precursor and trace the growth mechanism of confined carbyne with engineered properties. This is a crucial step, towards accessing the full application potential of confined carbyne hybrids by tailoring not only the isotopic fillers, but also the inner and outer tubes of the DWCNT hosts.

cond-mat.mtrl-sci↗

Synthesis of nitrogen doped single wall carbon nanotubes with caffeine

Nitrogen doped single wall carbon nanotubes have many functional benefits. Doping opens the possibility to control the electronic energy levels, surface energy, surface reactivity and charge carrier density. The additional electron in the outer shell changes the electronic properties of the nanotubes when introduced into the carbon lattice. Here we present the latest findings in the in-situ doping during synthesis of single wall carbon nanotubes using caffeine as a precursor of both carbon and nitrogen. A special furnace with two heating elements allowed us to sublimate and decompose the solid precursor. Caffeine allowed us to reach a high doping percentage with high quality nanotubes directly in a one-step synthesis procedure.

cond-mat.mtrl-sci↗

Oxidation stability of confined linear carbon chains, carbon nanotubes, and graphene nanoribbons as 1D nanocarbons

Three typical one-dimensional (1D)/quasi-1D nanocarbons, linear carbon chains, carbon nanotubes, and graphene nanoribbons have been proven to grow inside single-wall carbon nanotubes. This gives rise to three types of hybrid materials whose behaviour and properties compared among each other are far from understood. After proving successful the synthesis of these nanostructured materials in recently published work, we have now been able to study their oxidation stability systematically by using resonance Raman spectroscopy. Surprisingly, the linear carbon chains, which have been theoretically predicted to be very unstable, are actually thermally stable up to 500 °C assisted by the protection of the carbon nanotube hosts. Besides, longer linear carbon chains inside narrower CNTs are more stable than the shorter ones inside larger tubes, suggesting that the thermal stability not only depends on the length of linear carbon chains alone, but it is correlated with the confinement of the host tubes in a more complicated manner. In addition, graphene nanoribbons come overall in view as the most stable confined structures. On the other hand, peculiarities like the higher stability of the (6,5) CNT over its (6,4) counterpart allow this study to provide a solid platform for further studies on the application of these 1D nanocarbons (including true 1D linear carbon chains) at ambient conditions.

cond-mat.mtrl-sci↗

Templated direct growth of ultra-thin double-walled carbon nanotubes

Double-walled carbon nanotubes (DWCNTs) combined the advantages of multi-walled (MW-) and single-walled (SW-) CNTs can be obtained by transforming the precursors (e.g. fullerene, ferrocene) into thin inner CNTs inside SWCNTs as templates. However, this method is limited since the DWCNT yield is strongly influenced by the filling efficiency (depending on the type of the filled molecules), opening and cutting the SWCNTs, and the diameter of the host SWCNTs. Therefore, it cannot be applied to all types of SWCNT templates. Here we show a universal route to synthesize ultra-thin DWCNTs via making SWCNTs stable at high temperature in vacuum. This method applies to different types of SWCNTs including metallicity-sorted ones without using any precursors since the carbon sources were from the reconstructed SWCNTs and the residue carbons. The resulting DWCNTs are with high quality and the yield of inner tubes is comparable to/higher than that of the DWCNTs made from the transformation of ferrocene/fullerene peapods.

cond-mat.mtrl-sci↗

Extraction of Linear Carbon Chains Unravels the Role of the Carbon Nanotube Host

Linear carbon chains (LCCs) have been shown to grow inside double-walled carbon nanotubes (DWCNTs) but isolating them from this hosting material represents one of the most challenging tasks towards applications. Herein we report the extraction and separation of LCCs inside single-wall carbon nanotubes (LCCs@SWCNTs) extracted from a double walled host LCCs@DWCNTs by applying a combined tip-ultrasonic and density gradient ultracentrifugation (DGU) process. High-resolution transmission electron microscopy (HRTEM), optical absorption, and Raman spectroscopy show that not only short LCCs but clearly long LCCs (LLCCs) can be extracted and separated from the host. Moreover, the LLCCs can even be condensed by DGU. The Raman spectral frequency of LCCs remains almost unchanged regardless of the presence of the outer tube of the DWCNTs. This suggests that the major importance of the outer tubes is making the whole synthesis viable. We have also been able to observe the interaction between the LCCs and the inner tubes of DWCNTs, playing a major role in modifying the optical properties of LCCs. Our extraction method suggests the possibility towards the complete isolation of LCCs from CNTs.

cond-mat.mtrl-sci↗

Electronic band gaps of confined linear carbon chains ranging from polyyne to carbyne

Ultra long linear carbon chains of more than 6000 carbon atoms have recently been synthesized within double-walled carbon nanotubes, and they show a promising new route to one--atom--wide semiconductors with a direct band gap. Theoretical studies predicted that this band gap can be tuned by the length of the chains, the end groups, and their interactions with the environment. However, different density functionals lead to very different values of the band gap of infinitely long carbyne. In this work, we applied resonant Raman excitation spectroscopy with more than 50 laser wavelengths to determine for the first time the band gap of long carbon chains encapsulated inside DWCNTs. The experimentally determined band gaps ranging from 2.253 to 1.848 eV follow a linear relation with Raman frequency. This lower bound is the smallest band gap of linear carbon chains observed so far. The comparison with experimental data obtained for short chains in gas phase or in solution demonstrates the effect of the DWCNT encapsulation, leading to an essential downshift of the band gap. This is explained by the interaction between the carbon chain and the host tube, which greatly modifies the chain's bond length alternation.

cond-mat.mtrl-sci↗

Nanoscale Magnetic Compasses

We have synthesized nanoscale magnetic compasses with high yield. These ferromagnetic iron carbide nano-particles, which are encapsulated in a pair of parallel carbon needles, change their direction in response to an external magnetic field. Electron holography reveals magnetic fields confined to the vicinity of the bicone-shaped particles, which are composed of few ferromagnetic domains. Aligned magnetically and encapsulated in an acrylate polymer matrix, these nanocompasses exhibit anisotropic bulk magnetic permeability with an easy axis normal to the needle direction, that can be understood as a result of the anisotropic demagnetizing field of a nonspherical single-domain particle. This novel material with orthogonal magnetic and structural axes could be highly useful as magnetic components in electromagnetic wave absorbent materials and magnetorheological fluids.

cond-mat.mes-hall↗

Polyyne Electronic and Vibrational Properties under Environmental Interactions

Recently, the novel system of linear carbon chains inside of double-walled carbon nanotubes has extended the length of $sp^1$ hybridized carbon chains from 44 to thousands of atoms [L. Shi et al., Nat. Mater. 15, 634 (2016)]. The optoelectronic properties of these ultra-long chains are poorly described by current theoretical models, which are based on short chain experimental data and assume a constant environment. As such, a physical understanding of the system in terms of charge transfer and van der Waals interactions is widely missing. We provide a reference for the intrinsic Raman frequency of polyynes in vacuo and explicitly describe the interactions between polyynes and carbon nanotubes. We find that van der Waals interactions strongly shift the Raman frequency, which has been neither expected nor addressed before. As a consequence of charge transfer from the tube to the chain, the Raman response of long chains is qualitatively different from the known phonon dispersion of polymers close to the $Γ$-point. Based on these findings we show how to correctly interpret the Raman data, considering the nanotube's properties. This is essential for its use as an analytical tool to optimize the growth process for future applications.

cond-mat.mes-hall↗

Disentangling Vacancy Oxidation on Metallicity-Sorted Carbon Nanotubes

Pristine single-walled carbon nanotubes (SWCNTs) are rather inert to O$_2$ and N$_2$, which for low doses chemisorb only on defect sites or vacancies of the SWCNTs at the ppm level. However, very low doping has a major effect on the electronic properties and conductivity of the SWCNTs. Already at low O$_2$ doses (80 L), the X-ray photoelectron spectroscopy (XPS) O 1s signal becomes saturated, indicating nearly all the SWCNT's vacancies have been oxidized. As a result, probing vacancy oxidation on SWCNTs via XPS yields spectra with rather low signal-to-noise ratios, even for metallicity-sorted SWCNTs. We show that, even under these conditions, the first principles density functional theory calculated Kohn-Sham O 1s binding energies may be used to assign the XPS O 1s spectra for oxidized vacancies on SWCNTs into its individual components. This allows one to determine the specific functional groups or bonding environments measured. We find the XPS O 1s signal is mostly due to three O-containing functional groups on SWCNT vacancies: epoxy (C$_2$$>$O), carbonyl (C$_2$$>$C$=$O), and ketene (C$=$C$=$O), as ordered by abundance. Upon oxidation of nearly all the SWCNT's vacancies, the central peak's intensity for the metallic SWCNT sample is 60\% greater than for the semiconducting SWCNT sample. This suggests a greater abundance of O-containing defect structures on the metallic SWCNT sample. For both metallic and semiconducting SWCNTs, we find O$_2$ does not contribute to the measured XPS O~1s spectra.

cond-mat.mes-hall↗

On the bonding environment of phosphorus in purified doped single-walled carbon nanotubes

In this work, phosphorous-doped single-walled carbon nanotubes have been synthesized by the thermal decomposition of trimethylphosphine using a high-vacuum chemical vapor deposition method. Furthermore, a modified density-gradient-ultracentrifugation process has been applied to carefully purify our doped material. The combined use of Raman and X-ray photoelectron spectroscopy allowed us to provide the first insight into the bonding environment of P incorporated into the carbon lattice, avoiding competing signals arising from synthesis byproducts. This study represents the first step toward the identification of the bonding configuration of P atoms when direct substitution takes place.

cond-mat.mtrl-sci↗

Raman and XPS analyses of pristine and annealed N-doped double-walled carbon nanotubes

N-doped single/multi-walled carbon nanotubes (CNTs) were studied for long time from synthesis to properties. However, the stability of N in the CNT lattice still needs further developments. In this work, to obtain more stable N-doped CNTs, concentric double-walled (DW) CNTs with more N were synthesized using benzylamine as C and N source. In order to test the stability of N-doped DWCNTs, high-temperature annealing in vacuum was performed. By XPS and Raman spectroscopic measurements, we found that the N-doped DWCNTs are still stable under 1500 $\,^{\circ}\mathrm{C}$: the graphitic N does not change at all, the molecular N is partly removed, and the pyridinic N ratio greatly increases by more than two times. The reason could be that the N atoms from the surrounded N-contained materials combine into the CNT lattice during the annealing. Compared with the undoped DWCNTs, no Raman frequency shift was observed for the RBM, the G-band, and the G'-band of the N-doped DWCNTs.

physics.atm-clus↗

Confined linear carbon chains: A route to bulk carbyne

The extreme instability and strong chemical activity of carbyne, the infinite sp1 hybridized carbon chain, are responsible for its low possibility to survive in ambient conditions. Therefore, much less has been possible to explore about carbyne as compared to other novel carbon allotropes such as fullerenes, nanotubes and graphene. Although end-capping groups can be used to stabilize carbon chains, length limitation is still a barrier for its actual production, and even more for applications. Here, we report a novel route for bulk production of record long acetylenic linear carbon chains protected by thin double-walled carbon nanotubes. A corresponding extremely high Raman band is the first proof of a truly bulk yield formation of very long arrangements, which is unambiguously confirmed by transmission electron microscopy and near-field Raman spectroscopy. Our production establishes a way to exceptionally long stable carbon chains including more than 2300 carbon atoms, and an elegant forerunner towards the final goal of a bulk production of essentially infinite carbyne.

cond-mat.mtrl-sci↗

Calculation of the graphene C 1$\textit{s}$ core level binding energy

X-ray photoelectron spectroscopy (XPS) combined with first principles modeling is a powerful tool for determining the chemical composition and electronic structure of novel materials. Of these, graphene is an especially important model system for understanding the properties of other carbon nanomaterials. Here, we calculate the carbon 1$\textit{s}$ core level binding energy of pristine graphene using two methods based on density functional theory total energy differences: a calculation with an explicit core-hole ($Δ$KS), and a novel all-electron extension of the delta self-consistent field ($Δ$SCF) method. We study systematically their convergence and computational workload, and the dependence of the energies on the chosen exchange-correlation functional. The $\mathrmΔ$SCF method is computationally more expensive, but gives consistently higher C 1$\textit{s}$ binding energies. Although there is a significant functional dependence, the binding energy calculated using the PBE functional is found to be remarkably close to what has been measured for graphite.

cond-mat.mes-hall↗

Silicon-carbon bond inversions driven by 60 keV electrons in graphene

We demonstrate that 60 keV electron irradiation drives the diffusion of threefold coordinated Si dopants in graphene by one lattice site at a time. First principles simulations reveal that each step is caused by an electron impact on a C atom next to the dopant. Although the atomic motion happens below our experimental time resolution, stochastic analysis of 38 such lattice jumps reveals a probability for their occurrence in a good agreement with the simulations. Conversions from three- to fourfold coordinated dopant structures and the subsequent reverse process are significantly less likely than the direct bond inversion. Our results thus provide a model of non-destructive and atomically precise structural modification and detection for two-dimensional materials.

cond-mat.mes-hall↗

Orbital and spin magnetic moments of transforming 1D iron inside metallic and semiconducting carbon nanotubes

The orbital and spin magnetic properties of iron inside transforming metallic and semiconducting 1D carbon nanotube hybrids are studied by means of local x-ray magnetic circular dichroism (XMCD) and bulk superconducting quantum interference device (SQUID) measurements. Nanotube hybrids are initially ferrocene filled single-walled carbon nanotubes (SWCNT) of different metallicities. After a high temperature nanochemical reaction ferrocene molecules react with each other to form iron nano clusters. We show that the ferrocenes molecular orbitals interact differently with the SWCNT of different metallicities without significant XMCD response. This XMCD at various temperatures and magnetic fields reveals that the orbital and/or spin magnetic moments of the encapsulated iron are altered drastically as the transformation to 1D Fe nanoclusters takes place. The orbital and spin magnetic moments are both found to be larger in filled semiconducting nanotubes than in the metallic sample. This could mean that the magnetic polarizations of the encapsulated material is dependent on the metallicity of the tubes. From a comparison between the iron 3d magnetic moments and the bulk magnetism measured by SQUID, we conclude that the delocalized magnetisms dictate the magnetic properties of these 1D hybrid nanostructures.

cond-mat.mes-hall↗