arXiv subjects
Publications and source records attributed to Paolo Azzurri.
In order to stimulate new engagement and trigger some concrete studies in areas where further work would be beneficial towards fully understanding the physics potential of an $e^+e^-$ Higgs / Top / Electroweak factory, we propose to define a set of focus topics. The general reasoning and the proposed topics are described in this document.
The precise measurement of physics observables and the test of their consistency within the standard model (SM) are an invaluable approach, complemented by direct searches for new particles, to determine the existence of physics beyond the standard model (BSM). Studies of massive electroweak gauge bosons (W and Z bosons) are a promising target for indirect BSM searches, since the interactions of photons and gluons are strongly constrained by the unbroken gauge symmetries. They can be divided into two categories: (a) Fermion scattering processes mediated by s- or t-channel W/Z bosons, also known as electroweak precision measurements; and (b) multi-boson processes, which include production of two or more vector bosons in fermion-antifermion annihilation, as well as vector boson scattering (VBS) processes. The latter categories can test modifications of gauge-boson self-interactions, and the sensitivity is typically improved with increased collision energy. This report evaluates the achievable precision of a range of future experiments, which depend on the statistics of the collected data sample, the experimental and theoretical systematic uncertainties, and their correlations. In addition it presents a combined interpretation of these results, together with similar studies in the Higgs and top sector, in the Standard Model effective field theory (SMEFT) framework. This framework provides a model-independent prescription to put generic constraints on new physics and to study and combine large sets of experimental observables, assuming that the new physics scales are significantly higher than the EW scale.
The FCC-ee offers powerful opportunities to determine the Higgs boson parameters, exploiting over $10^6$ ${\rm e^+e^- \to ZH}$ events and almost $10^5$ ${\rm WW \to H}$ events at centre-of-mass energies around 240 and 365 GeV. This essay spotlights the important measurements of the ZH production cross section and of the Higgs boson mass. The measurement of the total ZH cross section is an essential input to the absolute determination of the HZZ coupling -- a "standard candle" that can be used by all other measurements, including those made at hadron colliders -- at the per-mil level. A combination of the measured cross sections at the two different centre-of-mass energies further provides the first evidence for the trilinear Higgs self-coupling, and possibly its first observation if the cross-section measurement can be made accurate enough. The determination of the Higgs boson mass with a precision significantly better than the Higgs boson width (4.1 MeV in the Standard Model) is a prerequisite to either constrain or measure the electron Yukawa coupling via direct ${\rm e^+e^- \to H}$ production at $\sqrt{s} = 125$ GeV. Approaching the statistical limit of 0.1% and $\mathcal{O}(1)$ MeV on the ZH cross section and the Higgs boson mass, respectively, sets highly demanding requirements on accelerator operation (ZH threshold scan, centre-of-mass energy measurement), detector design (lepton momentum resolution, hadronic final state reconstruction performance), theoretical calculations, and analysis techniques (efficiency and purity optimization with modern tools, constrained kinematic fits, control of systematic uncertainties). These challenges are examined in turn in this essay.
The FCC-ee physics program will deliver two complementary top-notch precision determinations of the W boson mass, and width. The first and main measurement relies on the rapid rise of the W-pair production cross section near its kinematic threshold. This method is extremely simple and clean, involving only the selection and counting of events, in all different decay channels. An optimal threshold-scan strategy with a total integrated luminosity of $12\,{\rm ab}^{-1}$ shared on energy points between 157 and 163 GeV will provide a statistical uncertainty on the W mass of 0.5 MeV and on the W width of 1.2 MeV. For these measurements, the goal of keeping the impact of systematic uncertainties below the statistical precision will be demanding, but feasible. The second method exploits the W-pair final state reconstruction and kinematic fit, making use of events with either four jets or two jets, one lepton and missing energy. The projected statistical precision of the second method is similar to the first method's, with uncertainties of $\sim 0.5$ ($1$) MeV for the W mass (width), employing W-pair data collected at the production threshold and at 240-365 GeV. For the kinematic reconstruction method, the final impact of systematic uncertainties is currently less clear, in particular uncertainties connected to the modelling of the W hadronic decays. The use and interplay of Z$γ$ and ZZ events, reconstructed and fitted with the same techniques as the WW events, will be important for the extraction of W mass measurements with data at the higher 240 and 365 GeV energies.
Events with vector bosons produced in association with jets have been extensively studied at hadron colliders and provide high-accuracy tests of the Standard Model. A good understanding of these processes is of paramount importance for precision Higgs physics, as well as for searches for new physics. In particular, associated production of $γ$, $W$ or $Z$ bosons with light-flavor and heavy-flavor jets is a powerful tool for testing perturbative QCD calculations, Monte Carlo event generators, and can also constrain the parametrizations used to describe the parton content of the proton. Furthermore, events with a $W$ or $Z$ boson produced with two well-separated jets can be used to distinguish between electroweak and strong production mechanisms, and to set limits on contributions of physics beyond the Standard Model. This review summarises the historical theoretical developments and the state-of-the-art in the modeling of vector-boson-plus-jet physics, while focusing on experimental results by LHC collaborations in Run-1 and Run-2, and including comparisons with recent measurements at the Tevatron.
The first stage of the FCC (Future Circular Collider) is a high-luminosity electron-positron collider (FCC-ee) with centre-of-mass energy ranging from 88 to 365 GeV, to study with high precision the Z, W, Higgs and top particles, with samples of $5 \times 10^{12}$ Z bosons, $10^8$ W pairs, $10^6$ Higgs bosons and $10^6$ top quark pairs. A cornerstone of the physics program lays in the precise (ppm) measurements of the W and Z masses and widths, as well as forward-backward asymmetries. To this effect the centre-of-mass energy distribution should be determined with the high precision. This document describes the capacity offered by FCC-ee, starting with transverse polarization of the beams around the Z pole and the W pair threshold. A running scheme based on regular measurements of the beam energy by resonant depolarization of pilot bunches, during physics data taking, is proposed. The design for polarization wigglers, polarimeter and depolarizer is outlined. The $e^\pm$ beam energies will be monitored with a relative precision of $10^{-6}$. The centre-of-mass energy is derived subject to further corrections, related to the beam acceleration, synchrotron radiation and beamstrahlung; these effects are identified and evaluated. Dimuon events $e^+e^- \to μ^+ μ^-$, recorded in the detectors, provide with great precision the beam crossing angle, the centre-of-mass energy spread, and the $e^+$ and $e^-$ energy difference. Monitoring methods to minimize absolute error and relative uncertainties are discussed. The impact on the physics measurements is given. A programme of further simulations, design, monitoring and R&D is outlined.
This document answers in simple terms many FAQs about FCC-ee, including comparisons with other colliders. It complements the FCC-ee CDR and the FCC Physics CDR by addressing many questions from non-experts and clarifying issues raised during the European Strategy symposium in Granada, with a view to informing discussions in the period between now and the final endorsement by the CERN Council in 2020 of the European Strategy Group recommendations. This document will be regularly updated as more questions appear or new information becomes available.
The observation of the electroweak production of a Z boson with two jets in pp collisions at $\sqrt{s} = 8$ TeV with the CMS experiment at the CERN LHC is presented, based on a data sample with an integrated luminosity of 19.7 fb$^{-1}$. The cross section measurement, combining the muon and electron channels, is in agreement with the theoretical expectations. Radiation patterns of selected Z plus two jets events, and the hadronic activity in the rapidity interval between the jets are also measured. These results are of substantial importance in the more general study of vector boson fusion processes, of relevance for Higgs boson searches and for measurements of electroweak gauge couplings and vector boson scattering.
First searches for new physics phenomena using the LHC 7 TeV proton-proton collision data collected by the CMS detector in 2010 are reviewed. Results are presented of searches for new physics in events with hadronic jet pairs, and for heavy stable charged particles, including a dedicated search for long-lived particles that stop in the detector and decay in periods between beam crossings.
The performance of jet finding using only charged tracks in CMS has been investigated. Different jet algorithms have been applied to QCD di-jet events, to hadronic tt multi-jet events and on Z+jets events. Results using jets made with tracks only or calorimeter towers are compared for energy response, angular resolution and jet matching to the leading partons. The jet reconstruction performance in the presence of pile-up interactions is presented for the Z+jets sample.
The expected performance of track reconstruction with LHC events using the CMS silicon tracker is presented. Track finding and fitting is accomplished with Kalman Filter techniques that achieve efficiencies above 99% on single muons with pT>1 GeV/c. Difficulties arise in the context of standard LHC events with a high density of charged particles, where the rate of fake combinatorial tracks is very large for low pT tracks, and nuclear interactions in the tracker material reduce the tracking efficiency for charged hadrons. Recent improvements with the CMS track reconstruction now allow to efficiently reconstruct charged tracks with pT down to few hundred MeV/c and as few as three crossed layers, with a very small fake fraction, by making use of an optimal rejection of fake tracks in conjunction with an iterative tracking procedure.
The measurements resulting from the analysis of the LEP2 data have brought more strong evidence in support of the standard electroweak model. In particular the LEP2 data has revealed (i) the first determination of the SU(2) gauge bosons self-couplings, (ii) the first direct measurements of the W decay-couplings, and (iii) the current best direct measurement of the W mass.