arXiv subjects

Paolo Bellavista

Publications and source records attributed to Paolo Bellavista.

28 records · Page 2Linked to original sources

arXiv2024

Probabilistic On-Demand Charging Scheduling for ISAC-Assisted WRSNs with Multiple Mobile Charging Vehicles

The internet of things (IoT) based wireless sensor networks (WSNs) face an energy shortage challenge that could be overcome by the novel wireless power transfer (WPT) technology. The combination of WSNs and WPT is known as wireless rechargeable sensor networks (WRSNs), with the charging efficiency and charging scheduling being the primary concerns. Therefore, this paper proposes a probabilistic on-demand charging scheduling for integrated sensing and communication (ISAC)-assisted WRSNs with multiple mobile charging vehicles (MCVs) that addresses three parts. First, it considers the four attributes with their probability distributions to balance the charging load on each MCV. The distributions are residual energy of charging node, distance from MCV to charging node, degree of charging node, and charging node betweenness centrality. Second, it considers the efficient charging factor strategy to partially charge network nodes. Finally, it employs the ISAC concept to efficiently utilize the wireless resources to reduce the traveling cost of each MCV and to avoid the charging conflicts between them. The simulation results show that the proposed protocol outperforms cutting-edge protocols in terms of energy usage efficiency, charging delay, survival rate, and travel distance.

cs.NI↗

arXiv2024

A Novel OMNeT++-based Simulation Tool for Vehicular Cloud Computing in ETSI MEC-compliant 5G Environments

Vehicular cloud computing is gaining popularity thanks to the rapid advancements in next generation wireless communication networks. Similarly, Edge Computing, along with its standard proposals such as European Telecommunications Standards Institute (ETSI) Multi-access Edge Computing (MEC), will play a vital role in these scenarios, by enabling the execution of cloud-based services at the edge of the network. Together, these solutions have the potential to create real micro-datacenters at the network edge, favoring several benefits like minimal latency, real-time data processing, and data locality. However, the research community has not yet the opportunity to use integrated simulation frameworks for the easy testing of applications that exploit both the vehicular cloud paradigm and MEC-compliant 5G deployment environments. In this paper, we present our simulation tool as a platform for researchers and engineers to design, test, and enhance applications utilizing the concepts of vehicular and edge cloud. Our platform significantly extends OMNet++ and Simu5G, and implements our ETSI MEC-compliant architecture that leverages resources provided by far-edge nodes. In addition, the paper analyzes and reports performance results for our simulation platform, as well as provides a use case where our simulator is used to support the design, test, and validation of an algorithm to distribute MEC application components on vehicular cloud resources.

cs.NI↗

arXiv2023

A Layered Architecture Enabling Metaverse Applications in Smart Manufacturing Environments

The steady rollout of Industrial IoT (IIoT) technology in the manufacturing domain embodies the potential to implement smarter and more resilient production processes. To this end, it is expected that there will be a strong reliance of manufacturing processes on cloud/edge services so as to act intelligently and flexibly. While automation is necessary to handle the environment's complexity, human-in-the-loop design approaches are paramount. In this context, Digital Twins play a crucial role by allowing human operators to inspect and monitor the environment to ensure stability and reliability. Integrating the IIoT with the Metaverse enhances the system's capabilities even further, offering new opportunities for efficiency and collaboration while enabling integrated management of assets and processes. This article presents a layered conceptual architecture as an enabler for smart manufacturing metaverse environments, targeting real-time data collection and representations from shopfloor assets and processes. At the bottom layer, our proposal relies on middleware technology, serving differentiated Quality of Service (QoS) needs of the Operation Technology (OT) monitoring processes. The latter contributes to feeding a virtual layer where data processes reside, creating representations of the monitored phenomena at different timescales. Metaverse applications can consume data by tapping into the metaverse engine, a microservice-oriented and accelerated Platform as a Service (PaaS) layer tasked with bringing data to life. Without loss of generality, we profile different facets of our proposal by relying on two different proof-of-concept inspection applications aimed at real-time monitoring of the network fabric activity and a visual asset monitoring one.

cs.NI↗

arXiv2023

Mitigating IoT Botnet DDos Attacks through MUD and eBPF based Traffic Filtering

As the prevalence of Internet-of-Things (IoT) devices becomes more and more dominant, so too do the associated management and security challenges. One such challenge is the exploitation of vulnerable devices for recruitment into botnets, which can be used to carry out Distributed Denial-of-Service (DDoS) attacks. The recent Manufacturer Usage Description (MUD) standard has been proposed as a way to mitigate this problem, by allowing manufacturers to define communication patterns that are permitted for their IoT devices, with enforcement at the gateway home router. In this paper, we present a novel integrated system implementation that uses a MUD manager (osMUD) to parse an extended set of MUD rules, which also allow for rate-limiting of traffic and for setting appropriate thresholds. Additionally, we present two new backends for MUD rule enforcement, one based on eBPF and the other based on the Linux standard iptables. The reported evaluation results show that these techniques are feasible and effective in protecting against attacks and in terms of their impact on legitimate traffic and on the home gateway.

cs.NI↗

arXiv2023

A Novel Design for Advanced 5G Deployment Environments with Virtualized Resources at Vehicular and MEC Nodes

IoT and edge computing are profoundly changing the information era, bringing a hyper-connected and context-aware computing environment to reality. Connected vehicles are a critical outcome of this synergy, allowing for the seamless interconnection of autonomous mobile/fixed objects, giving rise to a decentralized vehicle-to-everything (V2X) paradigm. On this front, the European Telecommunications Standards Institute (ETSI) proposed the Multi-Access Edge Computing (MEC) standard, addressing the execution of cloud-like services at the very edge of the infrastructure, thus facilitating the support of low-latency services at the far-edge. In this article, we go a step further and propose a novel ETSI MEC-compliant architecture that fully exploits the synergies between the edge and far-edge, extending the pool of virtualized resources available at MEC nodes with vehicular ones found in the vicinity. In particular, our approach allows vehicle entities to access and partake in a negotiation process embodying a rewarding scheme, while addressing resource volatility as vehicles join and leave the resource pool. To demonstrate the viability and flexibility of our proposed approach, we have built an ETSI MEC-compliant simulation model, which could be tailored to distribute application requests based on the availability of both local and remote resources, managing their transparent migration and execution. In addition, the paper reports on the experimental validation of our proposal in a 5G network setting, contrasting different service delivery modes, by highlighting the potential of the dynamic exploitation of far-edge vehicular resources.

cs.NI↗

arXiv2022

AI and 6G into the Metaverse: Fundamentals, Challenges and Future Research Trends

Since Facebook was renamed Meta, a lot of attention, debate, and exploration have intensified about what the Metaverse is, how it works, and the possible ways to exploit it. It is anticipated that Metaverse will be a continuum of rapidly emerging technologies, usecases, capabilities, and experiences that will make it up for the next evolution of the Internet. Several researchers have already surveyed the literature on artificial intelligence (AI) and wireless communications in realizing the Metaverse. However, due to the rapid emergence and continuous evolution of technologies, there is a need for a comprehensive and in-depth survey of the role of AI, 6G, and the nexus of both in realizing the immersive experiences of Metaverse. Therefore, in this survey, we first introduce the background and ongoing progress in augmented reality (AR), virtual reality (VR), mixed reality (MR) and spatial computing, followed by the technical aspects of AI and 6G. Then, we survey the role of AI in the Metaverse by reviewing the state-of-the-art in deep learning, computer vision, and Edge AI to extract the requirements of 6G in Metaverse. Next, we investigate the promising services of B5G/6G towards Metaverse, followed by identifying the role of AI in 6G networks and 6G networks for AI in support of Metaverse applications, and the need for sustainability in Metaverse. Finally, we enlist the existing and potential applications, usecases, and projects to highlight the importance of progress in the Metaverse. Moreover, in order to provide potential research directions to researchers, we underline the challenges, research gaps, and lessons learned identified from the literature review of the aforementioned technologies.

cs.AI↗

arXiv2022

Industry 5.0 is Coming: A Survey on Intelligent NextG Wireless Networks as Technological Enablers

Industry 5.0 vision, a step toward the next industrial revolution and enhancement to Industry 4.0, envisioned the new goals of resilient, sustainable, and human-centric approaches in diverse emerging applications, e.g., factories-of-the-future, digital society. The vision seeks to leverage human intelligence and creativity in nexus with intelligent, efficient, and reliable cognitive collaborating robots (cobots) to achieve zero waste, zerodefect, and mass customization-based manufacturing solutions. However, the vision requires the merging of cyber-physical worlds through utilizing Industry 5.0 technological enablers, e.g., cognitive cobots, person-centric artificial intelligence (AI), cyberphysical systems, digital twins, hyperconverged data storage and computing, communication infrastructure, and others. In this regard, the convergence of the emerging computational intelligence (CI) paradigm and next-generation wireless networks (NGWNs) can fulfill the stringent communication and computation requirements of the technological enablers in the Industry 5.0 vision, which is the aim of this survey-based tutorial. In this article, we address this issue by reviewing and analyzing current emerging concepts and technologies, e.g., CI tools and frameworks, network-in-box architecture, open radio access networks, softwarized service architectures, potential enabling services, and others, essential for designing the objectives of CINGWNs to fulfill the Industry 5.0 vision requirements. Finally, we provide a list of lessons learned from our detailed review, research challenges, and open issues that should be addressed in CI-NGWNs to realize Industry 5.0.

cs.NI↗

arXiv2022

IIFNet: A Fusion based Intelligent Service for Noisy Preamble Detection in 6G

In this article, we present our vision of preamble detection in a physical random access channel for next-generation (Next-G) networks using machine learning techniques. Preamble detection is performed to maintain communication and synchronization between devices of the Internet of Everything (IoE) and next-generation nodes. Considering the scalability and traffic density, Next-G networks have to deal with preambles corrupted by noise due to channel characteristics or environmental constraints. We show that when injecting 15% random noise, the detection performance degrades to 48%. We propose an informative instance-based fusion network (IIFNet) to cope with random noise and to improve detection performance, simultaneously. A novel sampling strategy for selecting informative instances from feature spaces has also been explored to improve detection performance. The proposed IIFNet is tested on a real dataset for preamble detection that was collected with the help of a reputable commercial company.

cs.NI↗

arXiv2022

Towards Energy Efficient Distributed Federated Learning for 6G Networks

The provision of communication services via portable and mobile devices, such as aerial base stations, is a crucial concept to be realized in 5G/6G networks. Conventionally, IoT/edge devices need to transmit the data directly to the base station for training the model using machine learning techniques. The data transmission introduces privacy issues that might lead to security concerns and monetary losses. Recently, Federated learning was proposed to partially solve privacy issues via model-sharing with base station. However, the centralized nature of federated learning only allow the devices within the vicinity of base stations to share the trained models. Furthermore, the long-range communication compels the devices to increase transmission power, which raises the energy efficiency concerns. In this work, we propose distributed federated learning (DBFL) framework that overcomes the connectivity and energy efficiency issues for distant devices. The DBFL framework is compatible with mobile edge computing architecture that connects the devices in a distributed manner using clustering protocols. Experimental results show that the framework increases the classification performance by 7.4\% in comparison to conventional federated learning while reducing the energy consumption.

cs.LG↗

arXiv2020

SoK: Beyond IoT MUD Deployments -- Challenges and Future Directions

Due to the advancement of IoT devices in both domestic and industrial environments, the need to incorporate a mechanism to build accountability in the IoT ecosystem is paramount. In the last few years, various initiatives have been started in this direction addressing many socio-technical concerns and challenges to build an accountable system. The solution that has received a lot of attention in both industry and academia is the Manufacturer Usage Description (MUD) specification. It gives the possibility to the IoT device manufacturers to describe communications needed by each device to work properly. MUD implementation is challenging not only due to the diversity of IoT devices and manufacturer/operator/regulators but also due to the incremental integration of MUD-based flow control in the already existing Internet infrastructure. To provide a better understanding of these challenges, in this work, we explore and investigate the prototypes of three implementations proposed by different research teams and organisations, useful for the community to understand which are the various features implemented by the existing technologies. By considering that there exist some behaviours which can be only defined by local policy, we propose a MUD capable network integrating our User Policy Server(UPS). The UPS provides network administrators and endusers an opportunity to interact with MUD components through a user-friendly interface. Hence, we present a comprehensive survey of the challenges.

cs.NI↗